lantiq: Add target TP-Link TD-W8980
authorJohn Crispin <john@openwrt.org>
Mon, 5 Oct 2015 10:28:19 +0000 (10:28 +0000)
committerJohn Crispin <john@openwrt.org>
Mon, 5 Oct 2015 10:28:19 +0000 (10:28 +0000)
The device is similar to the TD-W8970, beside a different Atheros 2.4 GHz
wireless chip and the additional, PCI connected, WAVE300 5 GHz wireless.

Signed-off-by: Mathias Kresin <openwrt@kresin.me>
SVN-Revision: 47130

target/linux/lantiq/base-files/etc/uci-defaults/02_network
target/linux/lantiq/dts/TDW8970.dts
target/linux/lantiq/dts/TDW8980.dts [new file with mode: 0644]
target/linux/lantiq/dts/TDW89X0.dtsi [new file with mode: 0644]
target/linux/lantiq/image/Makefile
target/linux/lantiq/xrx200/profiles/tplink.mk
tools/firmware-utils/src/mktplinkfw2.c

index ff21e02aea65291fd2301a3675ce2f333a856282..85d0eba1408177ab5731500fd81cc334a0526d7a 100644 (file)
@@ -151,7 +151,7 @@ P2812HNUF*)
        ucidef_add_switch_vlan "switch0" "1" "0 1 2 4 5 6t"
        ;;
 
-TDW8970)
+TDW8970|TDW8980)
        lan_mac=$(mtd_get_mac_binary boardconfig 61696)
        wan_mac=$(macaddr_add "$lan_mac" 1)
        ucidef_set_interface_lan 'eth0.1'
index d8dcb5d836626bd5107bda3d508e38c09615265b..172c46c12cbcac450985fad4bff8c43e3825785c 100644 (file)
@@ -1,256 +1,7 @@
 /dts-v1/;
 
-/include/ "vr9.dtsi"
+/include/ "TDW89X0.dtsi"
 
 / {
        model = "TDW8970 - TP-LINK TD-W8970";
-
-       chosen {
-               bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
-       };
-
-       memory@0 {
-               reg = <0x0 0x4000000>;
-       };
-
-       fpi@10000000 {
-               gpio: pinmux@E100B10 {
-                       pinctrl-names = "default";
-                       pinctrl-0 = <&state_default>;
-
-                       state_default: pinmux {
-                               mdio {
-                                       lantiq,groups = "mdio";
-                                       lantiq,function = "mdio";
-                               };
-                               gphy-leds {
-                                       lantiq,groups = "gphy0 led1", "gphy1 led1";
-                                       lantiq,function = "gphy";
-                                       lantiq,pull = <2>;
-                                       lantiq,open-drain = <0>;
-                                       lantiq,output = <1>;
-                               };
-                               phy-rst {
-                                       lantiq,pins = "io42";
-                                       lantiq,pull = <0>;
-                                       lantiq,open-drain = <0>;
-                                       lantiq,output = <1>;
-                               };
-                               spi-in {
-                                       lantiq,pins = "io16";
-                                       lantiq,open-drain = <1>;
-                                       lantiq,pull = <2>;
-                               };
-                               spi-out {
-                                       lantiq,pins = "io10", "io17", "io18", "io21";
-                                       lantiq,open-drain = <0>;
-                                       lantiq,pull = <2>;
-                               };
-                               pcie-rst {
-                                       lantiq,pins = "io38";
-                                       lantiq,pull = <0>;
-                                       lantiq,output = <1>;
-                               };
-                       };
-               };
-
-               eth@E108000 {
-                       #address-cells = <1>;
-                       #size-cells = <0>;
-                       compatible = "lantiq,xrx200-net";
-                       reg = < 0xE108000 0x3000 /* switch */
-                               0xE10B100 0x70 /* mdio */
-                               0xE10B1D8 0x30 /* mii */
-                               0xE10B308 0x30 /* pmac */
-                       >;
-                       interrupt-parent = <&icu0>;
-                       interrupts = <73 72>;
-
-                       lan: interface@0 {
-                               compatible = "lantiq,xrx200-pdi";
-                               #address-cells = <1>;
-                               #size-cells = <0>;
-                               reg = <0>;
-                               mtd-mac-address = <&ath9k_cal 0xf100>;
-                               lantiq,switch;
-
-                               ethernet@0 {
-                                       compatible = "lantiq,xrx200-pdi-port";
-                                       reg = <0>;
-                                       phy-mode = "rgmii";
-                                       phy-handle = <&phy0>;
-                                       // gpios = <&gpio 42 1>;
-                               };
-                               ethernet@5 {
-                                       compatible = "lantiq,xrx200-pdi-port";
-                                       reg = <5>;
-                                       phy-mode = "rgmii";
-                                       phy-handle = <&phy5>;
-                               };
-                               ethernet@2 {
-                                       compatible = "lantiq,xrx200-pdi-port";
-                                       reg = <2>;
-                                       phy-mode = "gmii";
-                                       phy-handle = <&phy11>;
-                               };
-                               ethernet@3 {
-                                       compatible = "lantiq,xrx200-pdi-port";
-                                       reg = <4>;
-                                       phy-mode = "gmii";
-                                       phy-handle = <&phy13>;
-                               };
-                       };
-
-                       mdio@0 {
-                               #address-cells = <1>;
-                               #size-cells = <0>;
-                               compatible = "lantiq,xrx200-mdio";
-                               phy0: ethernet-phy@0 {
-                                       reg = <0x0>;
-                                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
-                               };
-                               phy5: ethernet-phy@5 {
-                                       reg = <0x5>;
-                                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
-                               };
-                               phy11: ethernet-phy@11 {
-                                       reg = <0x11>;
-                                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
-                               };
-                               phy13: ethernet-phy@13 {
-                                       reg = <0x13>;
-                                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
-                               };
-                       };
-               };
-
-               ifxhcd@E101000 {
-                       status = "okay";
-                       gpios = <&gpio 33 0>;
-                       lantiq,portmask = <0x3>;
-               };
-
-               ifxhcd@E106000 {
-                       status = "okay";
-                       gpios = <&gpio 33 0>;
-               };
-       };
-
-       gphy-xrx200 {
-               compatible = "lantiq,phy-xrx200";
-               firmware = "lantiq/vr9_phy11g_a2x.bin";
-               phys = [ 00 01 ];
-       };
-
-       pcie {
-               compatible = "lantiq,pcie-xway";
-       };
-
-       spi {
-               #address-cells = <1>;
-               #size-cells = <1>;
-
-               compatible = "spi-gpio";
-
-               gpio-miso = <&gpio 16 0>;
-               gpio-mosi = <&gpio 17 0>;
-               gpio-sck = <&gpio 18 0>;
-               num-chipselects = <1>;
-               cs-gpios = <&gpio 10 1>;
-
-               m25p80@0 {
-                       #address-cells = <1>;
-                       #size-cells = <1>;
-                       compatible = "en25q64", "m25p80";
-                       reg = <0 0>;
-                       linux,modalias = "en25q64";
-                       spi-max-frequency = <1000000>;
-
-                       partition@0 {
-                               reg = <0x0 0x20000>;
-                               label = "u-boot";
-                               read-only;
-                       };
-
-                       partition@20000 {
-                               reg = <0x20000 0x6a0000>;
-                               label = "firmware";
-                       };
-
-                       partition@6c0000 {
-                               reg = <0x6c0000 0x100000>;
-                               label = "dsl_fw";
-                       };
-
-                       partition@7c0000 {
-                               reg = <0x7c0000 0x10000>;
-                               label = "config";
-                               read-only;
-                       };
-
-                       ath9k_cal: partition@7d0000 {
-                               reg = <0x7d0000 0x30000>;
-                               label = "boardconfig";
-                               read-only;
-                       };
-               };
-       };
-       
-       ath9k_eep {
-               compatible = "ath9k,eeprom";
-               ath,eep-flash = <&ath9k_cal 0x21000>;
-               ath,mac-offset = <0xf100>;
-               ath,mac-increment;
-               ath,led-pin = <0>;
-       };
-
-       gpio-keys-polled {
-               compatible = "gpio-keys-polled";
-               #address-cells = <1>;
-               #size-cells = <0>;
-               poll-interval = <100>;
-               reset {
-                       label = "reset";
-                       gpios = <&gpio 0 1>;
-                       linux,code = <0x198>;
-               };
-
-               wifi {
-                       label = "wifi";
-                       gpios = <&gpio 9 0>;
-                       linux,code = <0xf7>;
-                       linux,input-type = <5>; /* EV_SW */
-               };
-
-               wps {
-                       label = "wps";
-                       gpios = <&gpio 39 1>;
-                       linux,code = <0x211>;
-               };
-       };
-
-       gpio-leds {
-               compatible = "gpio-leds";
-
-               dsl {
-                       label = "dsl";
-                       gpios = <&gpio 4 0>;
-               };
-               internet {
-                       label = "internet";
-                       gpios = <&gpio 5 0>;
-               };
-               usb0 {
-                       label = "usb";
-                       gpios = <&gpio 19 0>;
-               };
-               usb2 {
-                       label = "usb2";
-                       gpios = <&gpio 20 0>;
-               };
-               wps {
-                       label = "wps";
-                       gpios = <&gpio 37 0>;
-               };
-       };
 };
diff --git a/target/linux/lantiq/dts/TDW8980.dts b/target/linux/lantiq/dts/TDW8980.dts
new file mode 100644 (file)
index 0000000..ad3d182
--- /dev/null
@@ -0,0 +1,31 @@
+/dts-v1/;
+
+/include/ "TDW89X0.dtsi"
+
+/ {
+       model = "TDW8980 - TP-LINK TD-W8980";
+
+       fpi@10000000 {
+               gpio: pinmux@E100B10 {
+                       state_default: pinmux {
+                               pci_rst {
+                                       lantiq,pins = "io21";
+                                       lantiq,output = <1>;
+                                       lantiq,open-drain;
+                               };
+                       };
+               };
+
+               pci@E105400 {
+                       status = "okay";
+                       lantiq,bus-clock = <33333333>;
+                       interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+                       interrupt-map = <0x7000 0 0 1 &icu0 30 1>;
+                       gpio-reset = <&gpio 21 0>;
+               };
+       };
+
+       ath9k_eep {
+               ath,pci-slot = <0>;
+       };
+};
diff --git a/target/linux/lantiq/dts/TDW89X0.dtsi b/target/linux/lantiq/dts/TDW89X0.dtsi
new file mode 100644 (file)
index 0000000..084aa25
--- /dev/null
@@ -0,0 +1,252 @@
+/include/ "vr9.dtsi"
+
+/ {
+       chosen {
+               bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
+       };
+
+       memory@0 {
+               reg = <0x0 0x4000000>;
+       };
+
+       fpi@10000000 {
+               gpio: pinmux@E100B10 {
+                       pinctrl-names = "default";
+                       pinctrl-0 = <&state_default>;
+
+                       state_default: pinmux {
+                               mdio {
+                                       lantiq,groups = "mdio";
+                                       lantiq,function = "mdio";
+                               };
+                               gphy-leds {
+                                       lantiq,groups = "gphy0 led1", "gphy1 led1";
+                                       lantiq,function = "gphy";
+                                       lantiq,pull = <2>;
+                                       lantiq,open-drain = <0>;
+                                       lantiq,output = <1>;
+                               };
+                               phy-rst {
+                                       lantiq,pins = "io42";
+                                       lantiq,pull = <0>;
+                                       lantiq,open-drain = <0>;
+                                       lantiq,output = <1>;
+                               };
+                               spi-in {
+                                       lantiq,pins = "io16";
+                                       lantiq,open-drain = <1>;
+                                       lantiq,pull = <2>;
+                               };
+                               spi-out {
+                                       lantiq,pins = "io10", "io17", "io18", "io21";
+                                       lantiq,open-drain = <0>;
+                                       lantiq,pull = <2>;
+                               };
+                               pcie-rst {
+                                       lantiq,pins = "io38";
+                                       lantiq,pull = <0>;
+                                       lantiq,output = <1>;
+                               };
+                       };
+               };
+
+               eth@E108000 {
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       compatible = "lantiq,xrx200-net";
+                       reg = < 0xE108000 0x3000 /* switch */
+                               0xE10B100 0x70 /* mdio */
+                               0xE10B1D8 0x30 /* mii */
+                               0xE10B308 0x30 /* pmac */
+                       >;
+                       interrupt-parent = <&icu0>;
+                       interrupts = <73 72>;
+
+                       lan: interface@0 {
+                               compatible = "lantiq,xrx200-pdi";
+                               #address-cells = <1>;
+                               #size-cells = <0>;
+                               reg = <0>;
+                               mtd-mac-address = <&ath9k_cal 0xf100>;
+                               lantiq,switch;
+
+                               ethernet@0 {
+                                       compatible = "lantiq,xrx200-pdi-port";
+                                       reg = <0>;
+                                       phy-mode = "rgmii";
+                                       phy-handle = <&phy0>;
+                                       // gpios = <&gpio 42 1>;
+                               };
+                               ethernet@5 {
+                                       compatible = "lantiq,xrx200-pdi-port";
+                                       reg = <5>;
+                                       phy-mode = "rgmii";
+                                       phy-handle = <&phy5>;
+                               };
+                               ethernet@2 {
+                                       compatible = "lantiq,xrx200-pdi-port";
+                                       reg = <2>;
+                                       phy-mode = "gmii";
+                                       phy-handle = <&phy11>;
+                               };
+                               ethernet@3 {
+                                       compatible = "lantiq,xrx200-pdi-port";
+                                       reg = <4>;
+                                       phy-mode = "gmii";
+                                       phy-handle = <&phy13>;
+                               };
+                       };
+
+                       mdio@0 {
+                               #address-cells = <1>;
+                               #size-cells = <0>;
+                               compatible = "lantiq,xrx200-mdio";
+                               phy0: ethernet-phy@0 {
+                                       reg = <0x0>;
+                                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+                               };
+                               phy5: ethernet-phy@5 {
+                                       reg = <0x5>;
+                                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+                               };
+                               phy11: ethernet-phy@11 {
+                                       reg = <0x11>;
+                                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+                               };
+                               phy13: ethernet-phy@13 {
+                                       reg = <0x13>;
+                                       compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
+                               };
+                       };
+               };
+
+               ifxhcd@E101000 {
+                       status = "okay";
+                       gpios = <&gpio 33 0>;
+                       lantiq,portmask = <0x3>;
+               };
+
+               ifxhcd@E106000 {
+                       status = "okay";
+                       gpios = <&gpio 33 0>;
+               };
+       };
+
+       gphy-xrx200 {
+               compatible = "lantiq,phy-xrx200";
+               firmware = "lantiq/vr9_phy11g_a2x.bin";
+               phys = [ 00 01 ];
+       };
+
+       pcie {
+               compatible = "lantiq,pcie-xway";
+       };
+
+       spi {
+               #address-cells = <1>;
+               #size-cells = <1>;
+
+               compatible = "spi-gpio";
+
+               gpio-miso = <&gpio 16 0>;
+               gpio-mosi = <&gpio 17 0>;
+               gpio-sck = <&gpio 18 0>;
+               num-chipselects = <1>;
+               cs-gpios = <&gpio 10 1>;
+
+               m25p80@0 {
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+                       compatible = "en25q64", "m25p80";
+                       reg = <0 0>;
+                       linux,modalias = "en25q64";
+                       spi-max-frequency = <1000000>;
+
+                       partition@0 {
+                               reg = <0x0 0x20000>;
+                               label = "u-boot";
+                               read-only;
+                       };
+
+                       partition@20000 {
+                               reg = <0x20000 0x6a0000>;
+                               label = "firmware";
+                       };
+
+                       partition@6c0000 {
+                               reg = <0x6c0000 0x100000>;
+                               label = "dsl_fw";
+                       };
+
+                       partition@7c0000 {
+                               reg = <0x7c0000 0x10000>;
+                               label = "config";
+                               read-only;
+                       };
+
+                       ath9k_cal: partition@7d0000 {
+                               reg = <0x7d0000 0x30000>;
+                               label = "boardconfig";
+                               read-only;
+                       };
+               };
+       };
+       
+       ath9k_eep {
+               compatible = "ath9k,eeprom";
+               ath,eep-flash = <&ath9k_cal 0x21000>;
+               ath,mac-offset = <0xf100>;
+               ath,mac-increment;
+               ath,led-pin = <0>;
+       };
+
+       gpio-keys-polled {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <100>;
+               reset {
+                       label = "reset";
+                       gpios = <&gpio 0 1>;
+                       linux,code = <0x198>;
+               };
+
+               wifi {
+                       label = "wifi";
+                       gpios = <&gpio 9 0>;
+                       linux,code = <0xf7>;
+                       linux,input-type = <5>; /* EV_SW */
+               };
+
+               wps {
+                       label = "wps";
+                       gpios = <&gpio 39 1>;
+                       linux,code = <0x211>;
+               };
+       };
+
+       gpio-leds {
+               compatible = "gpio-leds";
+
+               dsl {
+                       label = "dsl";
+                       gpios = <&gpio 4 0>;
+               };
+               internet {
+                       label = "internet";
+                       gpios = <&gpio 5 0>;
+               };
+               usb0 {
+                       label = "usb";
+                       gpios = <&gpio 19 0>;
+               };
+               usb2 {
+                       label = "usb2";
+                       gpios = <&gpio 20 0>;
+               };
+               wps {
+                       label = "wps";
+                       gpios = <&gpio 37 0>;
+               };
+       };
+};
index 7980627e4ec63f70be4b86c48b01cd14c95f7ca5..686cb6d7248595ec144b920ac6f2612130f65b50 100644 (file)
@@ -410,6 +410,9 @@ Image/Build/Profile/VG3503J_V2=$(call Image/BuildLoader/$(1),$(1),VG3503J_V2)
 Image/BuildKernel/Profile/TDW8970=$(call Image/BuildKernelTPLink/Template,TDW8970,TD-W8970v1,$(1))
 Image/Build/Profile/TDW8970=$(call Image/BuildTPLink/$(1),$(1),TDW8970,TD-W8970v1)
 
+Image/BuildKernel/Profile/TDW8980=$(call Image/BuildKernelTPLink/Template,TDW8980,TD-W8980v1,$(1))
+Image/Build/Profile/TDW8980=$(call Image/BuildTPLink/$(1),$(1),TDW8980,TD-W8980v1)
+
 Image/BuildKernel/Profile/VGV7510KW22NOR=$(call Image/BuildKernel/Template,VGV7510KW22NOR,$(1))
 Image/Build/Profile/VGV7510KW22NOR=$(call Image/Build/$(1),$(1),VGV7510KW22NOR)
 
index 1ee010ce3c8c9e674437c8365d8aa6a9db153442..6ae939906089c5ffbc8a23633588d615902c53a4 100644 (file)
@@ -4,3 +4,10 @@ define Profile/TDW8970
 endef
 
 $(eval $(call Profile,TDW8970))
+
+define Profile/TDW8980
+  NAME:=TP-LINK TD-W8980
+  PACKAGES:=kmod-ath9k wpad-mini kmod-usb-dwc2 kmod-ledtrig-usbdev
+endef
+
+$(eval $(call Profile,TDW8980))
index 34c4b14064aae9cb0f0638f377d19f84c4a4513f..25915e68bfdcdd35e22170ccbb08cc428c9ce078 100644 (file)
@@ -160,6 +160,11 @@ static struct board_info boards[] = {
                .hw_id          = 0x89700001,
                .hw_rev         = 1,
                .layout_id      = "8Mltq",
+       }, {
+               .id             = "TD-W8980v1",
+               .hw_id          = 0x89800001,
+               .hw_rev         = 14,
+               .layout_id      = "8Mltq",
        }, {
                .id             = "ArcherC20i",
                .hw_id          = 0xc2000001,