endif
LINUX_VERSION-5.4 = .158
-LINUX_VERSION-5.10 = .79
+LINUX_VERSION-5.10 = .80
LINUX_KERNEL_HASH-5.4.158 = 6e018fecdc8fc24553756e582d83b82d65b10a6b03ef36262a24911f839b8d59
-LINUX_KERNEL_HASH-5.10.79 = e49955e16a2ee26d0b3ca1521912daba5ab8f7a6b2c9e5f538bb0ae7b837a8ad
+LINUX_KERNEL_HASH-5.10.80 = 477ce8f7624263e4346c0fc25ffc334af06bcac4d6bebdd5a7fe4681557fdb39
remove_uri_prefix=$(subst git://,,$(subst http://,,$(subst https://,,$(1))))
sanitize_uri=$(call qstrip,$(subst @,_,$(subst :,_,$(subst .,_,$(subst -,_,$(subst /,_,$(1)))))))
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
-@@ -267,6 +267,7 @@ static void xhci_pci_quirks(struct devic
+@@ -274,6 +274,7 @@ static void xhci_pci_quirks(struct devic
pdev->device == 0x0015) {
xhci->quirks |= XHCI_RESET_ON_RESUME;
xhci->quirks |= XHCI_ZERO_64B_REGS;
ptr = ip6hoff + sizeof(struct ipv6hdr);
--- a/include/net/neighbour.h
+++ b/include/net/neighbour.h
-@@ -274,8 +274,10 @@ static inline bool neigh_key_eq128(const
+@@ -275,8 +275,10 @@ static inline bool neigh_key_eq128(const
const u32 *n32 = (const u32 *)n->primary_key;
const u32 *p32 = pkey;
+++ /dev/null
-From 4d3c17975c7814884a721fe693b3adf5c426d759 Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Tue, 10 Nov 2015 22:18:39 +0100
-Subject: [RFC] serial: core: add support for boot console with arbitrary
- baud rates
-
-The Arduino Yun uses a baud rate of 250000 by default. The serial is
-going over the Atmel ATmega and is used to connect to this chip.
-Without this patch Linux wants to switch the console to 9600 Baud.
-
-With this patch Linux will use the configured baud rate and not a
-default one specified in uart_register_driver().
-
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
-[rebased to 4.14, slightly reworded commit message]
-Signed-off-by: Sungbo Eo <mans0n@gorani.run>
----
- drivers/tty/serial/serial_core.c | 6 +++++-
- include/linux/console.h | 1 +
- 2 files changed, 6 insertions(+), 1 deletions(-)
-
---- a/drivers/tty/serial/serial_core.c
-+++ b/drivers/tty/serial/serial_core.c
-@@ -222,6 +222,8 @@ static int uart_port_startup(struct tty_
- if (retval == 0) {
- if (uart_console(uport) && uport->cons->cflag) {
- tty->termios.c_cflag = uport->cons->cflag;
-+ tty->termios.c_ospeed = uport->cons->baud;
-+ tty->termios.c_ispeed = uport->cons->baud;
- uport->cons->cflag = 0;
- }
- /*
-@@ -2123,8 +2125,10 @@ uart_set_options(struct uart_port *port,
- * Allow the setting of the UART parameters with a NULL console
- * too:
- */
-- if (co)
-+ if (co) {
- co->cflag = termios.c_cflag;
-+ co->baud = baud;
-+ }
-
- return 0;
- }
---- a/include/linux/console.h
-+++ b/include/linux/console.h
-@@ -150,6 +150,7 @@ struct console {
- short flags;
- short index;
- int cflag;
-+ int baud;
- void *data;
- struct console *next;
- };
pixfmt-nv24
--- a/drivers/media/v4l2-core/v4l2-ioctl.c
+++ b/drivers/media/v4l2-core/v4l2-ioctl.c
-@@ -1325,6 +1325,8 @@ static void v4l_fill_fmtdesc(struct v4l2
+@@ -1343,6 +1343,8 @@ static void v4l_fill_fmtdesc(struct v4l2
case V4L2_PIX_FMT_NV61M: descr = "Y/CrCb 4:2:2 (N-C)"; break;
case V4L2_PIX_FMT_NV12MT: descr = "Y/CbCr 4:2:0 (64x32 MB, N-C)"; break;
case V4L2_PIX_FMT_NV12MT_16X16: descr = "Y/CbCr 4:2:0 (16x16 MB, N-C)"; break;
+
--- a/drivers/media/v4l2-core/v4l2-ioctl.c
+++ b/drivers/media/v4l2-core/v4l2-ioctl.c
-@@ -1404,6 +1404,7 @@ static void v4l_fill_fmtdesc(struct v4l2
+@@ -1422,6 +1422,7 @@ static void v4l_fill_fmtdesc(struct v4l2
case V4L2_META_FMT_UVC: descr = "UVC Payload Header Metadata"; break;
case V4L2_META_FMT_D4XX: descr = "Intel D4xx UVC Metadata"; break;
case V4L2_META_FMT_VIVID: descr = "Vivid Metadata"; break;
+
--- a/drivers/media/v4l2-core/v4l2-ioctl.c
+++ b/drivers/media/v4l2-core/v4l2-ioctl.c
-@@ -1405,6 +1405,7 @@ static void v4l_fill_fmtdesc(struct v4l2
+@@ -1423,6 +1423,7 @@ static void v4l_fill_fmtdesc(struct v4l2
case V4L2_META_FMT_D4XX: descr = "Intel D4xx UVC Metadata"; break;
case V4L2_META_FMT_VIVID: descr = "Vivid Metadata"; break;
case V4L2_META_FMT_SENSOR_DATA: descr = "Sensor Ancillary Metadata"; break;
pixfmt-y10p
--- a/drivers/media/v4l2-core/v4l2-ioctl.c
+++ b/drivers/media/v4l2-core/v4l2-ioctl.c
-@@ -1283,6 +1283,7 @@ static void v4l_fill_fmtdesc(struct v4l2
+@@ -1301,6 +1301,7 @@ static void v4l_fill_fmtdesc(struct v4l2
case V4L2_PIX_FMT_Y16_BE: descr = "16-bit Greyscale BE"; break;
case V4L2_PIX_FMT_Y10BPACK: descr = "10-bit Greyscale (Packed)"; break;
case V4L2_PIX_FMT_Y10P: descr = "10-bit Greyscale (MIPI Packed)"; break;
pixfmt-y16
--- a/drivers/media/v4l2-core/v4l2-ioctl.c
+++ b/drivers/media/v4l2-core/v4l2-ioctl.c
-@@ -1284,6 +1284,7 @@ static void v4l_fill_fmtdesc(struct v4l2
+@@ -1302,6 +1302,7 @@ static void v4l_fill_fmtdesc(struct v4l2
case V4L2_PIX_FMT_Y10BPACK: descr = "10-bit Greyscale (Packed)"; break;
case V4L2_PIX_FMT_Y10P: descr = "10-bit Greyscale (MIPI Packed)"; break;
case V4L2_PIX_FMT_Y12P: descr = "12-bit Greyscale (MIPI Packed)"; break;
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
-@@ -279,6 +279,7 @@ static void xhci_pci_quirks(struct devic
+@@ -286,6 +286,7 @@ static void xhci_pci_quirks(struct devic
if (pdev->vendor == PCI_VENDOR_ID_VIA && pdev->device == 0x3483) {
xhci->quirks |= XHCI_LPM_SUPPORT;
xhci->quirks |= XHCI_EP_CTX_BROKEN_DCS;
--- a/kernel/cgroup/cgroup.c
+++ b/kernel/cgroup/cgroup.c
-@@ -5667,6 +5667,9 @@ int __init cgroup_init_early(void)
+@@ -5690,6 +5690,9 @@ int __init cgroup_init_early(void)
return 0;
}
/**
* cgroup_init - cgroup initialization
*
-@@ -5705,6 +5708,12 @@ int __init cgroup_init(void)
+@@ -5728,6 +5731,12 @@ int __init cgroup_init(void)
mutex_unlock(&cgroup_mutex);
for_each_subsys(ss, ssid) {
if (ss->early_init) {
struct cgroup_subsys_state *css =
-@@ -6242,6 +6251,10 @@ static int __init cgroup_disable(char *s
+@@ -6265,6 +6274,10 @@ static int __init cgroup_disable(char *s
strcmp(token, ss->legacy_name))
continue;
static_branch_disable(cgroup_subsys_enabled_key[i]);
pr_info("Disabling %s control group subsystem\n",
ss->name);
-@@ -6251,6 +6264,31 @@ static int __init cgroup_disable(char *s
+@@ -6274,6 +6287,31 @@ static int __init cgroup_disable(char *s
}
__setup("cgroup_disable=", cgroup_disable);
+++ /dev/null
-From def3d0357e0539e6f6b82f079ff156def6ec2107 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Thu, 19 Aug 2021 08:57:02 +0200
-Subject: [PATCH] ARM: dts: BCM5301X: Fix memory nodes names
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Thix fixes:
-arch/arm/boot/dts/bcm4708-netgear-r6250.dt.yaml: /: memory: False schema does not allow {'device_type': ['memory'], 'reg': [[0, 134217728], [2281701376, 134217728]]}
-arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dt.yaml: /: memory: False schema does not allow {'device_type': ['memory'], 'reg': [[0, 134217728], [2281701376, 134217728]]}
-arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dt.yaml: /: memory: False schema does not allow {'device_type': ['memory'], 'reg': [[0, 134217728], [2281701376, 402653184]]}
-arch/arm/boot/dts/bcm4709-linksys-ea9200.dt.yaml: /: memory: False schema does not allow {'device_type': ['memory'], 'reg': [[0, 134217728], [2281701376, 134217728]]}
-arch/arm/boot/dts/bcm4709-netgear-r7000.dt.yaml: /: memory: False schema does not allow {'device_type': ['memory'], 'reg': [[0, 134217728], [2281701376, 134217728]]}
-arch/arm/boot/dts/bcm4709-netgear-r8000.dt.yaml: /: memory: False schema does not allow {'device_type': ['memory'], 'reg': [[0, 134217728], [2281701376, 134217728]]}
-arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dt.yaml: /: memory: False schema does not allow {'device_type': ['memory'], 'reg': [[0, 134217728]]}
-arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dt.yaml: /: memory: False schema does not allow {'device_type': ['memory'], 'reg': [[0, 134217728], [2281701376, 402653184]]}
-arch/arm/boot/dts/bcm53016-meraki-mr32.dt.yaml: /: memory: False schema does not allow {'reg': [[0, 134217728]], 'device_type': ['memory']}
-arch/arm/boot/dts/bcm94708.dt.yaml: /: memory: False schema does not allow {'device_type': ['memory'], 'reg': [[0, 134217728]]}
-arch/arm/boot/dts/bcm94709.dt.yaml: /: memory: False schema does not allow {'device_type': ['memory'], 'reg': [[0, 134217728]]}
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/bcm4708-netgear-r6250.dts | 2 +-
- arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts | 2 +-
- arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts | 2 +-
- arch/arm/boot/dts/bcm4709-linksys-ea9200.dts | 2 +-
- arch/arm/boot/dts/bcm4709-netgear-r7000.dts | 2 +-
- arch/arm/boot/dts/bcm4709-netgear-r8000.dts | 2 +-
- arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts | 2 +-
- arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts | 2 +-
- arch/arm/boot/dts/bcm53016-meraki-mr32.dts | 2 +-
- arch/arm/boot/dts/bcm94708.dts | 2 +-
- arch/arm/boot/dts/bcm94709.dts | 2 +-
- 11 files changed, 11 insertions(+), 11 deletions(-)
-
---- a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
-+++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
-@@ -20,7 +20,7 @@
- bootargs = "console=ttyS0,115200 earlycon";
- };
-
-- memory {
-+ memory@0 {
- device_type = "memory";
- reg = <0x00000000 0x08000000>,
- <0x88000000 0x08000000>;
---- a/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
-+++ b/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
-@@ -19,7 +19,7 @@
- bootargs = "console=ttyS0,115200";
- };
-
-- memory {
-+ memory@0 {
- device_type = "memory";
- reg = <0x00000000 0x08000000>,
- <0x88000000 0x08000000>;
---- a/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
-+++ b/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
-@@ -19,7 +19,7 @@
- bootargs = "console=ttyS0,115200";
- };
-
-- memory {
-+ memory@0 {
- device_type = "memory";
- reg = <0x00000000 0x08000000>,
- <0x88000000 0x18000000>;
---- a/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts
-+++ b/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts
-@@ -16,7 +16,7 @@
- bootargs = "console=ttyS0,115200";
- };
-
-- memory {
-+ memory@0 {
- device_type = "memory";
- reg = <0x00000000 0x08000000>,
- <0x88000000 0x08000000>;
---- a/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
-+++ b/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
-@@ -19,7 +19,7 @@
- bootargs = "console=ttyS0,115200";
- };
-
-- memory {
-+ memory@0 {
- device_type = "memory";
- reg = <0x00000000 0x08000000>,
- <0x88000000 0x08000000>;
---- a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
-+++ b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
-@@ -30,7 +30,7 @@
- bootargs = "console=ttyS0,115200";
- };
-
-- memory {
-+ memory@0 {
- device_type = "memory";
- reg = <0x00000000 0x08000000>,
- <0x88000000 0x08000000>;
---- a/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts
-+++ b/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts
-@@ -15,7 +15,7 @@
- bootargs = "console=ttyS0,115200 earlycon";
- };
-
-- memory {
-+ memory@0 {
- device_type = "memory";
- reg = <0x00000000 0x08000000>;
- };
---- a/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts
-+++ b/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts
-@@ -16,7 +16,7 @@
- bootargs = "earlycon";
- };
-
-- memory {
-+ memory@0 {
- device_type = "memory";
- reg = <0x00000000 0x08000000>,
- <0x88000000 0x18000000>;
---- a/arch/arm/boot/dts/bcm53016-meraki-mr32.dts
-+++ b/arch/arm/boot/dts/bcm53016-meraki-mr32.dts
-@@ -20,7 +20,7 @@
- bootargs = " console=ttyS0,115200n8 earlycon";
- };
-
-- memory {
-+ memory@0 {
- reg = <0x00000000 0x08000000>;
- device_type = "memory";
- };
---- a/arch/arm/boot/dts/bcm94708.dts
-+++ b/arch/arm/boot/dts/bcm94708.dts
-@@ -38,7 +38,7 @@
- model = "NorthStar SVK (BCM94708)";
- compatible = "brcm,bcm94708", "brcm,bcm4708";
-
-- memory {
-+ memory@0 {
- device_type = "memory";
- reg = <0x00000000 0x08000000>;
- };
---- a/arch/arm/boot/dts/bcm94709.dts
-+++ b/arch/arm/boot/dts/bcm94709.dts
-@@ -38,7 +38,7 @@
- model = "NorthStar SVK (BCM94709)";
- compatible = "brcm,bcm94709", "brcm,bcm4709", "brcm,bcm4708";
-
-- memory {
-+ memory@0 {
- device_type = "memory";
- reg = <0x00000000 0x08000000>;
- };
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
-@@ -2080,7 +2080,7 @@ config CPU_MIPS32
+@@ -2081,7 +2081,7 @@ config CPU_MIPS32
config CPU_MIPS64
bool
default y if CPU_MIPS64_R1 || CPU_MIPS64_R2 || CPU_MIPS64_R5 || \
--- a/net/core/dev.c
+++ b/net/core/dev.c
-@@ -6799,15 +6799,10 @@ void __netif_napi_del(struct napi_struct
+@@ -6802,15 +6802,10 @@ void __netif_napi_del(struct napi_struct
}
EXPORT_SYMBOL(__netif_napi_del);
weight = n->weight;
/* This NAPI_STATE_SCHED test is for avoiding a race
-@@ -6827,7 +6822,7 @@ static int napi_poll(struct napi_struct
+@@ -6830,7 +6825,7 @@ static int napi_poll(struct napi_struct
n->poll, work, weight);
if (likely(work < weight))
/* Drivers must not modify the NAPI state if they
* consume the entire weight. In such cases this code
-@@ -6836,7 +6831,7 @@ static int napi_poll(struct napi_struct
+@@ -6839,7 +6834,7 @@ static int napi_poll(struct napi_struct
*/
if (unlikely(napi_disable_pending(n))) {
napi_complete(n);
}
if (n->gro_bitmask) {
-@@ -6854,12 +6849,29 @@ static int napi_poll(struct napi_struct
+@@ -6857,12 +6852,29 @@ static int napi_poll(struct napi_struct
if (unlikely(!list_empty(&n->poll_list))) {
pr_warn_once("%s: Budget exhausted after napi rescheduled\n",
n->dev ? n->dev->name : "backlog");
static int __dev_open(struct net_device *dev, struct netlink_ext_ack *extack)
{
const struct net_device_ops *ops = dev->netdev_ops;
-@@ -4261,6 +4283,21 @@ int gro_normal_batch __read_mostly = 8;
+@@ -4264,6 +4286,21 @@ int gro_normal_batch __read_mostly = 8;
static inline void ____napi_schedule(struct softnet_data *sd,
struct napi_struct *napi)
{
list_add_tail(&napi->poll_list, &sd->poll_list);
__raise_softirq_irqoff(NET_RX_SOFTIRQ);
}
-@@ -6752,6 +6789,12 @@ void netif_napi_add(struct net_device *d
+@@ -6755,6 +6792,12 @@ void netif_napi_add(struct net_device *d
set_bit(NAPI_STATE_NPSVC, &napi->state);
list_add_rcu(&napi->dev_list, &dev->napi_list);
napi_hash_add(napi);
}
EXPORT_SYMBOL(netif_napi_add);
-@@ -6768,9 +6811,28 @@ void napi_disable(struct napi_struct *n)
+@@ -6771,9 +6814,28 @@ void napi_disable(struct napi_struct *n)
hrtimer_cancel(&n->timer);
clear_bit(NAPI_STATE_DISABLE, &n->state);
static void flush_gro_hash(struct napi_struct *napi)
{
int i;
-@@ -6796,6 +6858,11 @@ void __netif_napi_del(struct napi_struct
+@@ -6799,6 +6861,11 @@ void __netif_napi_del(struct napi_struct
flush_gro_hash(napi);
napi->gro_bitmask = 0;
}
EXPORT_SYMBOL(__netif_napi_del);
-@@ -6877,6 +6944,51 @@ static int napi_poll(struct napi_struct
+@@ -6880,6 +6947,51 @@ static int napi_poll(struct napi_struct
return work;
}
* @n: NAPI context
--- a/net/core/dev.c
+++ b/net/core/dev.c
-@@ -4287,8 +4287,9 @@ static inline void ____napi_schedule(str
+@@ -4290,8 +4290,9 @@ static inline void ____napi_schedule(str
if (test_bit(NAPI_STATE_THREADED, &napi->state)) {
/* Paired with smp_mb__before_atomic() in
* wake_up_process() when it's not NULL.
*/
thread = READ_ONCE(napi->thread);
-@@ -6762,6 +6763,49 @@ static void init_gro_hash(struct napi_st
+@@ -6765,6 +6766,49 @@ static void init_gro_hash(struct napi_st
napi->gro_bitmask = 0;
}
{
--- a/net/core/net-sysfs.c
+++ b/net/core/net-sysfs.c
-@@ -538,6 +538,45 @@ static ssize_t phys_switch_id_show(struc
+@@ -587,6 +587,45 @@ static ssize_t phys_switch_id_show(struc
}
static DEVICE_ATTR_RO(phys_switch_id);
static struct attribute *net_class_attrs[] __ro_after_init = {
&dev_attr_netdev_group.attr,
&dev_attr_type.attr,
-@@ -570,6 +609,7 @@ static struct attribute *net_class_attrs
+@@ -619,6 +658,7 @@ static struct attribute *net_class_attrs
&dev_attr_proto_down.attr,
&dev_attr_carrier_up_count.attr,
&dev_attr_carrier_down_count.attr,
enum gro_result {
--- a/net/core/dev.c
+++ b/net/core/dev.c
-@@ -4294,6 +4294,8 @@ static inline void ____napi_schedule(str
+@@ -4297,6 +4297,8 @@ static inline void ____napi_schedule(str
*/
thread = READ_ONCE(napi->thread);
if (thread) {
wake_up_process(thread);
return;
}
-@@ -6554,7 +6556,8 @@ bool napi_complete_done(struct napi_stru
+@@ -6557,7 +6559,8 @@ bool napi_complete_done(struct napi_stru
WARN_ON_ONCE(!(val & NAPIF_STATE_SCHED));
/* If STATE_MISSED was set, leave STATE_SCHED set,
* because we will call napi->poll() one more time.
-@@ -6990,16 +6993,25 @@ static int napi_poll(struct napi_struct
+@@ -6993,16 +6996,25 @@ static int napi_poll(struct napi_struct
static int napi_thread_wait(struct napi_struct *napi)
{
--- a/net/core/dev.c
+++ b/net/core/dev.c
-@@ -6997,7 +6997,7 @@ static int napi_thread_wait(struct napi_
+@@ -7000,7 +7000,7 @@ static int napi_thread_wait(struct napi_
set_current_state(TASK_INTERRUPTIBLE);
/* Testing SCHED_THREADED bit here to make sure the current
* kthread owns this napi and could poll on this napi.
* Testing SCHED bit is not enough because SCHED bit might be
-@@ -7015,6 +7015,7 @@ static int napi_thread_wait(struct napi_
+@@ -7018,6 +7018,7 @@ static int napi_thread_wait(struct napi_
set_current_state(TASK_INTERRUPTIBLE);
}
__set_current_state(TASK_RUNNING);
struct nf_icmp_net {
--- a/net/netfilter/nf_conntrack_proto_udp.c
+++ b/net/netfilter/nf_conntrack_proto_udp.c
-@@ -270,6 +270,11 @@ void nf_conntrack_udp_init_net(struct ne
+@@ -273,6 +273,11 @@ void nf_conntrack_udp_init_net(struct ne
for (i = 0; i < UDP_CT_MAX; i++)
un->timeouts[i] = udp_timeouts[i];
if (ret)
--- a/drivers/net/ethernet/ti/davinci_emac.c
+++ b/drivers/net/ethernet/ti/davinci_emac.c
-@@ -1687,7 +1687,6 @@ davinci_emac_of_get_pdata(struct platfor
+@@ -1699,7 +1699,6 @@ davinci_emac_of_get_pdata(struct platfor
const struct of_device_id *match;
const struct emac_platform_data *auxdata;
struct emac_platform_data *pdata = NULL;
if (!IS_ENABLED(CONFIG_OF) || !pdev->dev.of_node)
return dev_get_platdata(&pdev->dev);
-@@ -1699,11 +1698,8 @@ davinci_emac_of_get_pdata(struct platfor
+@@ -1711,11 +1710,8 @@ davinci_emac_of_get_pdata(struct platfor
np = pdev->dev.of_node;
pdata->version = EMAC_VERSION_2;
--- a/block/blk.h
+++ b/block/blk.h
-@@ -355,6 +355,7 @@ char *disk_name(struct gendisk *hd, int
+@@ -361,6 +361,7 @@ char *disk_name(struct gendisk *hd, int
#define ADDPART_FLAG_NONE 0
#define ADDPART_FLAG_RAID 1
#define ADDPART_FLAG_WHOLEDISK 2
--- a/include/net/sch_generic.h
+++ b/include/net/sch_generic.h
-@@ -623,12 +623,13 @@ extern struct Qdisc_ops noop_qdisc_ops;
+@@ -625,12 +625,13 @@ extern struct Qdisc_ops noop_qdisc_ops;
extern struct Qdisc_ops pfifo_fast_ops;
extern struct Qdisc_ops mq_qdisc_ops;
extern struct Qdisc_ops noqueue_qdisc_ops;
help
--- a/net/core/dev.c
+++ b/net/core/dev.c
-@@ -3644,6 +3644,11 @@ static int xmit_one(struct sk_buff *skb,
+@@ -3646,6 +3646,11 @@ static int xmit_one(struct sk_buff *skb,
if (dev_nit_active(dev))
dev_queue_xmit_nit(skb, dev);
+dma-shared-buffer-objs := $(dma-buf-objs-y)
--- a/drivers/dma-buf/dma-buf.c
+++ b/drivers/dma-buf/dma-buf.c
-@@ -1418,4 +1418,5 @@ static void __exit dma_buf_deinit(void)
+@@ -1419,4 +1419,5 @@ static void __exit dma_buf_deinit(void)
dma_buf_uninit_debugfs();
kern_unmount(dma_buf_mnt);
}
config CEVT_BCM1480
bool
-@@ -3174,6 +3171,18 @@ choice
+@@ -3175,6 +3172,18 @@ choice
bool "Extend builtin kernel arguments with bootloader arguments"
endchoice
__u16 tc_index; /* traffic control index */
--- a/net/core/dev.c
+++ b/net/core/dev.c
-@@ -6056,6 +6056,9 @@ static enum gro_result dev_gro_receive(s
+@@ -6059,6 +6059,9 @@ static enum gro_result dev_gro_receive(s
int same_flow;
int grow;
if (netif_elide_gro(skb->dev))
goto normal;
-@@ -8033,6 +8036,48 @@ static void __netdev_adjacent_dev_unlink
+@@ -8036,6 +8039,48 @@ static void __netdev_adjacent_dev_unlink
&upper_dev->adj_list.lower);
}
static int __netdev_upper_dev_link(struct net_device *dev,
struct net_device *upper_dev, bool master,
void *upper_priv, void *upper_info,
-@@ -8084,6 +8129,7 @@ static int __netdev_upper_dev_link(struc
+@@ -8087,6 +8132,7 @@ static int __netdev_upper_dev_link(struc
if (ret)
return ret;
ret = call_netdevice_notifiers_info(NETDEV_CHANGEUPPER,
&changeupper_info.info);
ret = notifier_to_errno(ret);
-@@ -8180,6 +8226,7 @@ static void __netdev_upper_dev_unlink(st
+@@ -8183,6 +8229,7 @@ static void __netdev_upper_dev_unlink(st
__netdev_adjacent_dev_unlink_neighbour(dev, upper_dev);
call_netdevice_notifiers_info(NETDEV_CHANGEUPPER,
&changeupper_info.info);
-@@ -8966,6 +9013,7 @@ int dev_set_mac_address(struct net_devic
+@@ -8969,6 +9016,7 @@ int dev_set_mac_address(struct net_devic
if (err)
return err;
dev->addr_assign_type = NET_ADDR_SET;
@@ -61,7 +61,7 @@ KBUILD_CFLAGS += $(call cc-option,-fno-i
# macro, but instead defines a whole series of macros which makes
# testing for a specific architecture or later rather impossible.
- arch-$(CONFIG_CPU_32v7M) =-D__LINUX_ARM_ARCH__=7 -march=armv7-m -Wa,-march=armv7-m
--arch-$(CONFIG_CPU_32v7) =-D__LINUX_ARM_ARCH__=7 $(call cc-option,-march=armv7-a,-march=armv5t -Wa$(comma)-march=armv7-a)
+ arch-$(CONFIG_CPU_32v7M) =-D__LINUX_ARM_ARCH__=7 -march=armv7-m
+-arch-$(CONFIG_CPU_32v7) =-D__LINUX_ARM_ARCH__=7 -march=armv7-a
+arch-$(CONFIG_CPU_32v7) =-D__LINUX_ARM_ARCH__=7 -mcpu=cortex-a15
- arch-$(CONFIG_CPU_32v6) =-D__LINUX_ARM_ARCH__=6 $(call cc-option,-march=armv6,-march=armv5t -Wa$(comma)-march=armv6)
+ arch-$(CONFIG_CPU_32v6) =-D__LINUX_ARM_ARCH__=6 -march=armv6
# Only override the compiler option if ARMv6. The ARMv6K extensions are
# always available in ARMv7
+++ /dev/null
-From ae9a2ac4d283b2925a97523a05ea024499329c16 Mon Sep 17 00:00:00 2001
-From: Miquel Raynal <miquel.raynal@bootlin.com>
-Date: Wed, 29 Sep 2021 00:22:58 +0200
-Subject: [PATCH] mtd: rawnand: xway: Keep the driver compatible with on-die
- ECC engines
-
-Following the introduction of the generic ECC engine infrastructure, it
-was necessary to reorganize the code and move the ECC configuration in
-the ->attach_chip() hook. Failing to do that properly lead to a first
-series of fixes supposed to stabilize the situation. Unfortunately, this
-only fixed the use of software ECC engines, preventing any other kind of
-engine to be used, including on-die ones.
-
-It is now time to (finally) fix the situation by ensuring that we still
-provide a default (eg. software ECC) but will still support different
-ECC engines such as on-die ECC engines if properly described in the
-device tree.
-
-There are no changes needed on the core side in order to do this, but we
-just need to leverage the logic there which allows:
-1- a subsystem default (set to Host engines in the raw NAND world)
-2- a driver specific default (here set to software ECC engines)
-3- any type of engine requested by the user (ie. described in the DT)
-
-As the raw NAND subsystem has not yet been fully converted to the ECC
-engine infrastructure, in order to provide a default ECC engine for this
-driver we need to set chip->ecc.engine_type *before* calling
-nand_scan(). During the initialization step, the core will consider this
-entry as the default engine for this driver. This value may of course
-be overloaded by the user if the usual DT properties are provided.
-
-Fixes: d525914b5bd8 ("mtd: rawnand: xway: Move the ECC initialization to ->attach_chip()")
-Cc: stable@vger.kernel.org
-Cc: Jan Hoffmann <jan@3e8.eu>
-Cc: Kestrel seventyfour <kestrelseventyfour@gmail.com>
-Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
----
- drivers/mtd/nand/raw/xway_nand.c | 12 +++++++++---
- 1 file changed, 9 insertions(+), 3 deletions(-)
-
---- a/drivers/mtd/nand/raw/xway_nand.c
-+++ b/drivers/mtd/nand/raw/xway_nand.c
-@@ -148,9 +148,8 @@ static void xway_write_buf(struct nand_c
-
- static int xway_attach_chip(struct nand_chip *chip)
- {
-- chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_SOFT;
--
-- if (chip->ecc.algo == NAND_ECC_ALGO_UNKNOWN)
-+ if (chip->ecc.engine_type == NAND_ECC_ENGINE_TYPE_SOFT &&
-+ chip->ecc.algo == NAND_ECC_ALGO_UNKNOWN)
- chip->ecc.algo = NAND_ECC_ALGO_HAMMING;
-
- return 0;
-@@ -219,6 +218,13 @@ static int xway_nand_probe(struct platfo
- | NAND_CON_SE_P | NAND_CON_WP_P | NAND_CON_PRE_P
- | cs_flag, EBU_NAND_CON);
-
-+ /*
-+ * This driver assumes that the default ECC engine should be TYPE_SOFT.
-+ * Set ->engine_type before registering the NAND devices in order to
-+ * provide a driver specific default value.
-+ */
-+ data->chip.ecc.engine_type = NAND_ECC_ENGINE_TYPE_SOFT;
-+
- /* Scan to find existence of the device */
- err = nand_scan(&data->chip, 1);
- if (err)
+++ /dev/null
-From 497acc03cd3918baabe25d46e30c5c62b998e24d Mon Sep 17 00:00:00 2001
-From: Aleksander Jan Bajkowski <olek2@wp.pl>
-Date: Sat, 19 Jun 2021 13:38:12 +0200
-Subject: [PATCH 1/5] MIPS: lantiq: dma: add small delay after reset
-
-Reading the DMA registers immediately after the reset causes
-Data Bus Error. Adding a small delay fixes this problem.
-
-Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
----
- arch/mips/lantiq/xway/dma.c | 3 +++
- 1 file changed, 3 insertions(+)
-
---- a/arch/mips/lantiq/xway/dma.c
-+++ b/arch/mips/lantiq/xway/dma.c
-@@ -11,6 +11,7 @@
- #include <linux/export.h>
- #include <linux/spinlock.h>
- #include <linux/clk.h>
-+#include <linux/delay.h>
- #include <linux/err.h>
-
- #include <lantiq_soc.h>
-@@ -221,6 +222,8 @@ ltq_dma_init(struct platform_device *pde
- clk_enable(clk);
- ltq_dma_w32_mask(0, DMA_RESET, LTQ_DMA_CTRL);
-
-+ usleep_range(1, 10);
-+
- /* disable all interrupts */
- ltq_dma_w32(0, LTQ_DMA_IRNEN);
-
+++ /dev/null
-From d31260c2f6a5cdddb052ab7cb09560eb23ce6597 Mon Sep 17 00:00:00 2001
-From: Aleksander Jan Bajkowski <olek2@wp.pl>
-Date: Thu, 15 Apr 2021 21:28:24 +0200
-Subject: [PATCH 2/5] MIPS: lantiq: dma: reset correct number of channel
-
-Different SoCs have a different number of channels, e.g .:
-* amazon-se has 10 channels,
-* danube+ar9 have 20 channels,
-* vr9 has 28 channels,
-* ar10 has 24 channels.
-
-We can read the ID register and, depending on the reported
-number of channels, reset the appropriate number of channels.
-
-Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
----
- arch/mips/lantiq/xway/dma.c | 11 ++++++-----
- 1 file changed, 6 insertions(+), 5 deletions(-)
-
---- a/arch/mips/lantiq/xway/dma.c
-+++ b/arch/mips/lantiq/xway/dma.c
-@@ -30,6 +30,7 @@
- #define LTQ_DMA_PCTRL 0x44
- #define LTQ_DMA_IRNEN 0xf4
-
-+#define DMA_ID_CHNR GENMASK(26, 20) /* channel number */
- #define DMA_DESCPT BIT(3) /* descriptor complete irq */
- #define DMA_TX BIT(8) /* TX channel direction */
- #define DMA_CHAN_ON BIT(0) /* channel on / off bit */
-@@ -40,7 +41,6 @@
- #define DMA_POLL BIT(31) /* turn on channel polling */
- #define DMA_CLK_DIV4 BIT(6) /* polling clock divider */
- #define DMA_2W_BURST BIT(1) /* 2 word burst length */
--#define DMA_MAX_CHANNEL 20 /* the soc has 20 channels */
- #define DMA_ETOP_ENDIANNESS (0xf << 8) /* endianness swap etop channels */
- #define DMA_WEIGHT (BIT(17) | BIT(16)) /* default channel wheight */
-
-@@ -206,7 +206,7 @@ ltq_dma_init(struct platform_device *pde
- {
- struct clk *clk;
- struct resource *res;
-- unsigned id;
-+ unsigned int id, nchannels;
- int i;
-
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-@@ -228,17 +228,18 @@ ltq_dma_init(struct platform_device *pde
- ltq_dma_w32(0, LTQ_DMA_IRNEN);
-
- /* reset/configure each channel */
-- for (i = 0; i < DMA_MAX_CHANNEL; i++) {
-+ id = ltq_dma_r32(LTQ_DMA_ID);
-+ nchannels = ((id & DMA_ID_CHNR) >> 20);
-+ for (i = 0; i < nchannels; i++) {
- ltq_dma_w32(i, LTQ_DMA_CS);
- ltq_dma_w32(DMA_CHAN_RST, LTQ_DMA_CCTRL);
- ltq_dma_w32(DMA_POLL | DMA_CLK_DIV4, LTQ_DMA_CPOLL);
- ltq_dma_w32_mask(DMA_CHAN_ON, 0, LTQ_DMA_CCTRL);
- }
-
-- id = ltq_dma_r32(LTQ_DMA_ID);
- dev_info(&pdev->dev,
- "Init done - hw rev: %X, ports: %d, channels: %d\n",
-- id & 0x1f, (id >> 16) & 0xf, id >> 20);
-+ id & 0x1f, (id >> 16) & 0xf, nchannels);
-
- return 0;
- }
+++ /dev/null
-From 7d9ea9052d6680d2910b8b005c397d95b3a8b012 Mon Sep 17 00:00:00 2001
-From: Aleksander Jan Bajkowski <olek2@wp.pl>
-Date: Wed, 7 Apr 2021 21:04:39 +0200
-Subject: [PATCH 3/5] MIPS: lantiq: dma: fix burst length for DEU
-
-The current definition of 2W burst length is invalid.
-This patch fixes it. Current downstream DEU driver doesn't
-use DMA. An incorrect burst length value doesn't cause any
-errors. This patch also adds other burst length values.
-
-Fixes: dfec1a827d2b ("MIPS: Lantiq: Add DMA support")
-Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
----
- arch/mips/lantiq/xway/dma.c | 9 +++++++--
- 1 file changed, 7 insertions(+), 2 deletions(-)
-
---- a/arch/mips/lantiq/xway/dma.c
-+++ b/arch/mips/lantiq/xway/dma.c
-@@ -40,7 +40,11 @@
- #define DMA_IRQ_ACK 0x7e /* IRQ status register */
- #define DMA_POLL BIT(31) /* turn on channel polling */
- #define DMA_CLK_DIV4 BIT(6) /* polling clock divider */
--#define DMA_2W_BURST BIT(1) /* 2 word burst length */
-+#define DMA_PCTRL_2W_BURST 0x1 /* 2 word burst length */
-+#define DMA_PCTRL_4W_BURST 0x2 /* 4 word burst length */
-+#define DMA_PCTRL_8W_BURST 0x3 /* 8 word burst length */
-+#define DMA_TX_BURST_SHIFT 4 /* tx burst shift */
-+#define DMA_RX_BURST_SHIFT 2 /* rx burst shift */
- #define DMA_ETOP_ENDIANNESS (0xf << 8) /* endianness swap etop channels */
- #define DMA_WEIGHT (BIT(17) | BIT(16)) /* default channel wheight */
-
-@@ -191,7 +195,8 @@ ltq_dma_init_port(int p)
- break;
-
- case DMA_PORT_DEU:
-- ltq_dma_w32((DMA_2W_BURST << 4) | (DMA_2W_BURST << 2),
-+ ltq_dma_w32((DMA_PCTRL_2W_BURST << DMA_TX_BURST_SHIFT) |
-+ (DMA_PCTRL_2W_BURST << DMA_RX_BURST_SHIFT),
- LTQ_DMA_PCTRL);
- break;
-
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
-@@ -2430,6 +2430,12 @@ config MIPS_VPE_LOADER
+@@ -2431,6 +2431,12 @@ config MIPS_VPE_LOADER
Includes a loader for loading an elf relocatable object
onto another VPE and running it.
},
[PORT_NPCM] = {
.name = "Nuvoton 16550",
-@@ -2719,6 +2719,11 @@ serial8250_do_set_termios(struct uart_po
+@@ -2732,6 +2732,11 @@ serial8250_do_set_termios(struct uart_po
unsigned long flags;
unsigned int baud, quot, frac = 0;
help
--- a/arch/powerpc/platforms/85xx/Makefile
+++ b/arch/powerpc/platforms/85xx/Makefile
-@@ -26,6 +26,7 @@ obj-$(CONFIG_CORENET_GENERIC) += coren
+@@ -28,6 +28,7 @@ obj-$(CONFIG_CORENET_GENERIC) += coren
obj-$(CONFIG_FB_FSL_DIU) += t1042rdb_diu.o
obj-$(CONFIG_STX_GP3) += stx_gp3.o
obj-$(CONFIG_TQM85xx) += tqm85xx.o
select DEFAULT_UIMAGE
--- a/arch/powerpc/platforms/85xx/Makefile
+++ b/arch/powerpc/platforms/85xx/Makefile
-@@ -10,6 +10,7 @@ obj-y += common.o
+@@ -12,6 +12,7 @@ obj-y += common.o
obj-$(CONFIG_BSC9131_RDB) += bsc913x_rdb.o
obj-$(CONFIG_BSC9132_QDS) += bsc913x_qds.o
obj-$(CONFIG_C293_PCIE) += c293pcie.o
help
--- a/arch/powerpc/platforms/85xx/Makefile
+++ b/arch/powerpc/platforms/85xx/Makefile
-@@ -25,6 +25,7 @@ obj-$(CONFIG_P1023_RDB) += p1023_rdb.o
+@@ -27,6 +27,7 @@ obj-$(CONFIG_P1023_RDB) += p1023_rdb.o
obj-$(CONFIG_TWR_P102x) += twr_p102x.o
obj-$(CONFIG_CORENET_GENERIC) += corenet_generic.o
obj-$(CONFIG_FB_FSL_DIU) += t1042rdb_diu.o
select DEFAULT_UIMAGE
--- a/arch/powerpc/platforms/85xx/Makefile
+++ b/arch/powerpc/platforms/85xx/Makefile
-@@ -22,6 +22,7 @@ obj-$(CONFIG_P1010_RDB) += p1010rdb.o
+@@ -24,6 +24,7 @@ obj-$(CONFIG_P1010_RDB) += p1010rdb.o
obj-$(CONFIG_P1022_DS) += p1022_ds.o
obj-$(CONFIG_P1022_RDK) += p1022_rdk.o
obj-$(CONFIG_P1023_RDB) += p1023_rdb.o
select DEFAULT_UIMAGE
--- a/arch/powerpc/platforms/85xx/Makefile
+++ b/arch/powerpc/platforms/85xx/Makefile
-@@ -24,6 +24,7 @@ obj-$(CONFIG_P1022_RDK) += p1022_rdk.o
+@@ -26,6 +26,7 @@ obj-$(CONFIG_P1022_RDK) += p1022_rdk.o
obj-$(CONFIG_P1023_RDB) += p1023_rdb.o
obj-$(CONFIG_PANDA) += panda.o
obj-$(CONFIG_TWR_P102x) += twr_p102x.o
#include <linux/platform_data/x86/apple.h>
#include <linux/pm_runtime.h>
#include <linux/suspend.h>
-@@ -5762,3 +5763,34 @@ static void apex_pci_fixup_class(struct
+@@ -5763,3 +5764,34 @@ static void apex_pci_fixup_class(struct
}
DECLARE_PCI_FIXUP_CLASS_HEADER(0x1ac1, 0x089a,
PCI_CLASS_NOT_DEFINED, 8, apex_pci_fixup_class);
}
return 0;
-@@ -1186,7 +1186,7 @@ void phy_state_machine(struct work_struc
+@@ -1191,7 +1191,7 @@ void phy_state_machine(struct work_struc
case PHY_HALTED:
if (phydev->link) {
phydev->link = 0;
}
return 0;
-@@ -1186,7 +1189,10 @@ void phy_state_machine(struct work_struc
+@@ -1191,7 +1194,10 @@ void phy_state_machine(struct work_struc
case PHY_HALTED:
if (phydev->link) {
phydev->link = 0;
--- a/drivers/media/usb/uvc/uvc_driver.c
+++ b/drivers/media/usb/uvc/uvc_driver.c
-@@ -3004,6 +3004,18 @@ static const struct usb_device_id uvc_id
+@@ -3009,6 +3009,18 @@ static const struct usb_device_id uvc_id
.bInterfaceSubClass = 1,
.bInterfaceProtocol = 0,
.driver_info = UVC_INFO_META(V4L2_META_FMT_D4XX) },
#include <media/v4l2-common.h>
-@@ -1183,9 +1188,149 @@ static void uvc_video_decode_data(struct
+@@ -1188,9 +1193,149 @@ static void uvc_video_decode_data(struct
uvc_urb->async_operations++;
}
/* Mark the buffer as done if the EOF marker is set. */
if (data[1] & UVC_STREAM_EOF && buf->bytesused != 0) {
uvc_trace(UVC_TRACE_FRAME, "Frame complete (EOF found).\n");
-@@ -1742,6 +1887,8 @@ static int uvc_init_video_isoc(struct uv
+@@ -1747,6 +1892,8 @@ static int uvc_init_video_isoc(struct uv
if (npackets == 0)
return -ENOMEM;
--- a/drivers/tty/serial/serial_core.c
+++ b/drivers/tty/serial/serial_core.c
-@@ -418,6 +418,9 @@ uart_get_baud_rate(struct uart_port *por
+@@ -425,6 +425,9 @@ uart_get_baud_rate(struct uart_port *por
break;
}
--- a/drivers/clocksource/Kconfig
+++ b/drivers/clocksource/Kconfig
-@@ -126,6 +126,15 @@ config RDA_TIMER
+@@ -127,6 +127,15 @@ config RDA_TIMER
help
Enables the support for the RDA Micro timer driver.
projects / openwrt / staging / chunkeey.git / commitdiff