kernel: bump 4.19 to 4.19.46
authorKoen Vandeputte <koen.vandeputte@ncentric.com>
Tue, 28 May 2019 10:28:11 +0000 (12:28 +0200)
committerKoen Vandeputte <koen.vandeputte@ncentric.com>
Mon, 3 Jun 2019 10:40:53 +0000 (12:40 +0200)
Refreshed all patches.

Compile-tested on: cns3xxx, imx6
Runtime-tested on: cns3xxx, imx6

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
include/kernel-version.mk
target/linux/cns3xxx/patches-4.19/130-Extend-PCIE_BUS_PEER2PEER-to-set-MRSS-128-to-fix-CNS3xxx-BM-DMA..patch
target/linux/generic/hack-4.19/721-phy_packets.patch
target/linux/generic/pending-4.19/530-jffs2_make_lzma_available.patch
target/linux/generic/pending-4.19/655-increase_skb_pad.patch
target/linux/generic/pending-4.19/670-ipv6-allow-rejecting-with-source-address-failed-policy.patch
target/linux/generic/pending-4.19/810-pci_disable_common_quirks.patch

index 5a51aded367791725b843b490190fed372a0a013..1535073a9dcfabdc2b397c6429be539ca58d9ca6 100644 (file)
@@ -8,11 +8,11 @@ endif
 
 LINUX_VERSION-4.9 = .179
 LINUX_VERSION-4.14 = .122
-LINUX_VERSION-4.19 = .45
+LINUX_VERSION-4.19 = .46
 
 LINUX_KERNEL_HASH-4.9.179 = 532e4b7b0103806dad9124fd09d15d19594eca08e7f900e94ff805d3b4171ee3
 LINUX_KERNEL_HASH-4.14.122 = c8a3f40ef877e18b3d2890e0954f2d81b6d012a7321836ca4e5b036ef93f68f5
-LINUX_KERNEL_HASH-4.19.45 = eb31e62fbb30aaeedb892cecdd8ac9746d42cbbef2ef2356f9ca8e13514b9d2b
+LINUX_KERNEL_HASH-4.19.46 = 097b52fe8a872259f4a3dba571b2eaf7b9863d9cde5399c6b316dec0ef57e67a
 
 remove_uri_prefix=$(subst git://,,$(subst http://,,$(subst https://,,$(1))))
 sanitize_uri=$(call qstrip,$(subst @,_,$(subst :,_,$(subst .,_,$(subst -,_,$(subst /,_,$(1)))))))
index b17a61392d9116ac099c183d18a194b26a598c06..3276000fe45174845387100e230a96169361d450 100644 (file)
@@ -1,6 +1,6 @@
 --- a/drivers/pci/probe.c
 +++ b/drivers/pci/probe.c
-@@ -2629,7 +2629,8 @@ static void pcie_write_mrrs(struct pci_d
+@@ -2634,7 +2634,8 @@ static void pcie_write_mrrs(struct pci_d
         * In the "safe" case, do not configure the MRRS.  There appear to be
         * issues with setting MRRS to 0 on a number of devices.
         */
@@ -12,7 +12,7 @@
        /*
 --- a/include/linux/pci.h
 +++ b/include/linux/pci.h
-@@ -866,7 +866,7 @@ enum pcie_bus_config_types {
+@@ -868,7 +868,7 @@ enum pcie_bus_config_types {
        PCIE_BUS_DEFAULT,       /* Ensure MPS matches upstream bridge */
        PCIE_BUS_SAFE,          /* Use largest MPS boot-time devices support */
        PCIE_BUS_PERFORMANCE,   /* Use MPS and MRRS for best performance */
index 7626d1016d28f571897fbcacc58a62b7ae485ac9..640ef3776975261c6d9f35ff238283945ee052dc 100644 (file)
@@ -56,7 +56,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
   */
 --- a/include/linux/skbuff.h
 +++ b/include/linux/skbuff.h
-@@ -2527,6 +2527,10 @@ static inline int pskb_trim(struct sk_bu
+@@ -2529,6 +2529,10 @@ static inline int pskb_trim(struct sk_bu
        return (len < skb->len) ? __pskb_trim(skb, len) : 0;
  }
  
@@ -67,7 +67,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
  /**
   *    pskb_trim_unique - remove end from a paged unique (not cloned) buffer
   *    @skb: buffer to alter
-@@ -2657,16 +2661,6 @@ static inline struct sk_buff *dev_alloc_
+@@ -2660,16 +2664,6 @@ static inline struct sk_buff *dev_alloc_
  }
  
  
index 625967342e991fda80d0f2917f3e0b1061d754dc..f28186a40c37505380f922568a2ff31bcf2101f4 100644 (file)
@@ -1119,7 +1119,7 @@ Signed-off-by: Alexandros C. Couloumbis <alex@ozo.com>
  ifdef CONFIG_FUNCTION_TRACER
  ORIG_CFLAGS := $(KBUILD_CFLAGS)
  KBUILD_CFLAGS = $(subst $(CC_FLAGS_FTRACE),,$(ORIG_CFLAGS))
-@@ -128,6 +138,8 @@ obj-$(CONFIG_ZSTD_COMPRESS) += zstd/
+@@ -139,6 +149,8 @@ obj-$(CONFIG_ZSTD_COMPRESS) += zstd/
  obj-$(CONFIG_ZSTD_DECOMPRESS) += zstd/
  obj-$(CONFIG_XZ_DEC) += xz/
  obj-$(CONFIG_RAID6_PQ) += raid6/
index 20b0fd894f2b6a8eada6b02cdb3b32e3f92bd983..db79a6db22e70312062c02ed91bbc99b1a26bcb9 100644 (file)
@@ -9,7 +9,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
 
 --- a/include/linux/skbuff.h
 +++ b/include/linux/skbuff.h
-@@ -2491,7 +2491,7 @@ static inline int pskb_network_may_pull(
+@@ -2493,7 +2493,7 @@ static inline int pskb_network_may_pull(
   * NET_IP_ALIGN(2) + ethernet_header(14) + IP_header(20/40) + ports(8)
   */
  #ifndef NET_SKB_PAD
index d727edeb20bc90848ccd1d41cc305acb34f482e9..838bbe4a425a2d024dd48b32d3ea87754cbb3144 100644 (file)
@@ -157,7 +157,7 @@ Signed-off-by: Jonas Gorski <jogo@openwrt.org>
        case RTN_THROW:
        case RTN_UNREACHABLE:
        default:
-@@ -3758,6 +3777,17 @@ static int ip6_pkt_prohibit_out(struct n
+@@ -3768,6 +3787,17 @@ static int ip6_pkt_prohibit_out(struct n
        return ip6_pkt_drop(skb, ICMPV6_ADM_PROHIBITED, IPSTATS_MIB_OUTNOROUTES);
  }
  
@@ -175,7 +175,7 @@ Signed-off-by: Jonas Gorski <jogo@openwrt.org>
  /*
   *    Allocate a dst for local (unicast / anycast) address.
   */
-@@ -4205,7 +4235,8 @@ static int rtm_to_fib6_config(struct sk_
+@@ -4215,7 +4245,8 @@ static int rtm_to_fib6_config(struct sk_
        if (rtm->rtm_type == RTN_UNREACHABLE ||
            rtm->rtm_type == RTN_BLACKHOLE ||
            rtm->rtm_type == RTN_PROHIBIT ||
@@ -185,7 +185,7 @@ Signed-off-by: Jonas Gorski <jogo@openwrt.org>
                cfg->fc_flags |= RTF_REJECT;
  
        if (rtm->rtm_type == RTN_LOCAL)
-@@ -5053,6 +5084,8 @@ static int ip6_route_dev_notify(struct n
+@@ -5063,6 +5094,8 @@ static int ip6_route_dev_notify(struct n
  #ifdef CONFIG_IPV6_MULTIPLE_TABLES
                net->ipv6.ip6_prohibit_entry->dst.dev = dev;
                net->ipv6.ip6_prohibit_entry->rt6i_idev = in6_dev_get(dev);
@@ -194,7 +194,7 @@ Signed-off-by: Jonas Gorski <jogo@openwrt.org>
                net->ipv6.ip6_blk_hole_entry->dst.dev = dev;
                net->ipv6.ip6_blk_hole_entry->rt6i_idev = in6_dev_get(dev);
  #endif
-@@ -5064,6 +5097,7 @@ static int ip6_route_dev_notify(struct n
+@@ -5074,6 +5107,7 @@ static int ip6_route_dev_notify(struct n
                in6_dev_put_clear(&net->ipv6.ip6_null_entry->rt6i_idev);
  #ifdef CONFIG_IPV6_MULTIPLE_TABLES
                in6_dev_put_clear(&net->ipv6.ip6_prohibit_entry->rt6i_idev);
@@ -202,7 +202,7 @@ Signed-off-by: Jonas Gorski <jogo@openwrt.org>
                in6_dev_put_clear(&net->ipv6.ip6_blk_hole_entry->rt6i_idev);
  #endif
        }
-@@ -5258,6 +5292,15 @@ static int __net_init ip6_route_net_init
+@@ -5268,6 +5302,15 @@ static int __net_init ip6_route_net_init
        net->ipv6.ip6_blk_hole_entry->dst.ops = &net->ipv6.ip6_dst_ops;
        dst_init_metrics(&net->ipv6.ip6_blk_hole_entry->dst,
                         ip6_template_metrics, true);
@@ -218,7 +218,7 @@ Signed-off-by: Jonas Gorski <jogo@openwrt.org>
  #endif
  
        net->ipv6.sysctl.flush_delay = 0;
-@@ -5276,6 +5319,8 @@ out:
+@@ -5286,6 +5329,8 @@ out:
        return ret;
  
  #ifdef CONFIG_IPV6_MULTIPLE_TABLES
@@ -227,7 +227,7 @@ Signed-off-by: Jonas Gorski <jogo@openwrt.org>
  out_ip6_prohibit_entry:
        kfree(net->ipv6.ip6_prohibit_entry);
  out_ip6_null_entry:
-@@ -5296,6 +5341,7 @@ static void __net_exit ip6_route_net_exi
+@@ -5306,6 +5351,7 @@ static void __net_exit ip6_route_net_exi
  #ifdef CONFIG_IPV6_MULTIPLE_TABLES
        kfree(net->ipv6.ip6_prohibit_entry);
        kfree(net->ipv6.ip6_blk_hole_entry);
@@ -235,7 +235,7 @@ Signed-off-by: Jonas Gorski <jogo@openwrt.org>
  #endif
        dst_entries_destroy(&net->ipv6.ip6_dst_ops);
  }
-@@ -5372,6 +5418,9 @@ void __init ip6_route_init_special_entri
+@@ -5382,6 +5428,9 @@ void __init ip6_route_init_special_entri
        init_net.ipv6.ip6_prohibit_entry->rt6i_idev = in6_dev_get(init_net.loopback_dev);
        init_net.ipv6.ip6_blk_hole_entry->dst.dev = init_net.loopback_dev;
        init_net.ipv6.ip6_blk_hole_entry->rt6i_idev = in6_dev_get(init_net.loopback_dev);
index 3f452ebf4896a5bfef27fb6a0423a9e7e857af36..c8c28b51755398371ee0e6ffd7b82d2cd0cf06f5 100644 (file)
@@ -33,7 +33,7 @@ Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
  /*
   * The Mellanox Tavor device gives false positive parity errors.  Mark this
   * device with a broken_parity_status to allow PCI scanning code to "skip"
-@@ -3135,6 +3136,8 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_I
+@@ -3152,6 +3153,8 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_I
  DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65f9, quirk_intel_mc_errata);
  DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65fa, quirk_intel_mc_errata);
  
@@ -42,7 +42,7 @@ Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
  /*
   * Ivytown NTB BAR sizes are misreported by the hardware due to an erratum.
   * To work around this, query the size it should be configured to by the
-@@ -3160,6 +3163,8 @@ static void quirk_intel_ntb(struct pci_d
+@@ -3177,6 +3180,8 @@ static void quirk_intel_ntb(struct pci_d
  DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x0e08, quirk_intel_ntb);
  DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x0e0d, quirk_intel_ntb);
  
@@ -51,7 +51,7 @@ Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
  /*
   * Some BIOS implementations leave the Intel GPU interrupts enabled, even
   * though no one is handling them (e.g., if the i915 driver is never
-@@ -3198,6 +3203,8 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_IN
+@@ -3215,6 +3220,8 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_IN
  DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x010a, disable_igfx_irq);
  DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0152, disable_igfx_irq);