--- /dev/null
+define Package/base-files/install-target
+ rm -f $(1)/etc/config/network
+endef
+
+
--- /dev/null
+#!/bin/sh
+# Copyright (C) 2006 OpenWrt.org
+
+set_led() {
+ local led="$1"
+ local state="$2"
+ [ -f "/proc/diag/led/$1" ] && echo "$state" > "/proc/diag/led/$1"
+}
+
+set_state() {
+ case "$1" in
+ preinit)
+ set_led dmz 1
+ set_led diag 1
+ set_led power 0
+ ;;
+ failsafe)
+ set_led diag f
+ set_led power f
+ set_led dmz f
+ ;;
+ done)
+ set_led dmz 0
+ set_led diag 0
+ set_led power 1
+ ;;
+ esac
+}
--- /dev/null
+#!/bin/sh /etc/rc.common
+# Copyright (C) 2006 OpenWrt.org
+
+START=05
+
+start() {
+ [ -e /etc/config/network ] && {
+ local batch
+
+ config_cb() {
+ case "$1" in
+ switch)
+ option_cb() {
+ case "$1" in
+ vlan[0-9]|vlan1[0-5])
+ local id="${1#vlan}"
+ local ports="${2%\*}"
+ append batch "delete network.eth0.${1}${N}"
+ append batch "set network.eth0_${id}=switch_vlan${N}"
+ append batch "set network.eth0_${id}.device=eth0${N}"
+ append batch "set network.eth0_${id}.vlan=${id}${N}"
+ append batch "set network.eth0_${id}.ports='${ports}'${N}"
+ ;;
+ esac
+ }
+ ;;
+ switch_vlan)
+ option_cb() { :; }
+ batch=""
+ ;;
+ esac
+ }
+
+ config_load network
+
+ [ -n "$batch" ] && {
+ logger -t netconfig "migrating switch config to new format ..."
+ echo "$batch${N}commit network" | uci batch
+ }
+
+ exit 0
+ }
+
+ mkdir -p /etc/config
+
+ (
+ if grep -E 'mtd0: 000(6|a)0000' /proc/mtd 2>&- >&-; then
+ # WGT634u
+ echo boardtype=wgt634u
+ else
+ strings "$(find_mtd_part nvram)"
+ fi
+ ) | awk '
+ function p(cfgname, name) {
+ if (c[name] != "") print " option " cfgname " \"" c[name] "\""
+ }
+
+ function vlan(id, name) {
+ if (c[name] != "") {
+ print "config switch_vlan eth0_" id
+ print " option device \"eth0\""
+ print " option vlan " id
+ print " option ports \"" c[name] "\""
+ print ""
+ }
+ }
+
+ function macinc(mac, maca, i, result) {
+ split(mac, maca, ":")
+ for (i = 1; i <= 6; i++) maca[i] = "0x" maca[i]
+ if (++maca[6] > 0xff) {
+ maca[5]++
+ maca[6] = 0
+ }
+ for (i = 1; i <= 6; i++) {
+ if (i != 1) result = result ":"
+ result = result sprintf("%02x", maca[i])
+ }
+ return result
+ }
+
+ BEGIN {
+ FS="="
+ c["lan_ifname"]="eth0.0"
+ c["wan_ifname"]="eth0.1"
+ c["vlan0ports"]="1 2 3 4 5"
+ c["vlan1ports"]="0 5"
+ getline < "/proc/diag/model"
+ model=$0
+ for (i = 0; i < 6; i++) {
+ if (mac_check != "") mac_check = mac_check ":"
+ mac_check = mac_check "[0-9a-fA-F][0-9a-fA-F]"
+ }
+ }
+
+ ($1 == "boardnum") || ($1 == "boardtype") || ($1 == "boardflags") || ($1 ~ /macaddr/) {
+ nvram[$1] = $2
+ }
+
+ END {
+ if ((model == "ASUS WL-HDD") || (model == "ASUS WL-300g") || (model == "Linksys WAP54G V1")) {
+ c["wan_ifname"] = ""
+ c["lan_ifname"] = "eth1"
+ }
+ if (model == "ASUS WL-330gE") {
+ c["wan_ifname"] = ""
+ c["lan_ifname"] = "eth0"
+ c["vlan0ports"] = ""
+ c["vlan1ports"] = ""
+ }
+ if ((model == "ASUS WL-500g") || (model == "Microsoft MN-700")) {
+ c["wan_ifname"] = "eth1"
+ c["lan_ifname"] = "eth0"
+ }
+ if ((model == "ASUS WL-500g Premium V2") || (model == "Dell TrueMobile 2300 v2") || (model == "Buffalo WHR-G125")) {
+ c["vlan0ports"] = "0 1 2 3 5"
+ c["vlan1ports"] = "4 5"
+ }
+ if (model == "Dell TrueMobile 2300") {
+ c["lan_ifname"] = "eth0"
+ c["wan_ifname"] = "eth1"
+ c["vlan0ports"] = "0 1 2 3 4 5u"
+ c["vlan1ports"] = ""
+ }
+ if (nvram["boardtype"] == "bcm94710r4") {
+ # Toshiba WRC-1000
+ c["lan_ifname"] = "eth0"
+ c["wan_ifname"] = "eth1"
+ }
+ if ((nvram["boardtype"] == "wgt634u") || (nvram["boardtype"] == "0x0467")) {
+ c["vlan0ports"] = "0 1 2 3 5"
+ c["vlan1ports"] = "4 5"
+ }
+ if ((nvram["boardtype"] == "0x042f") || (nvram["boardtype"] == "0x0472")) {
+ if (nvram["boardnum"] == "45") {
+ # WL-500gP
+ c["vlan0ports"] = "1 2 3 4 5"
+ c["vlan1ports"] = "0 5"
+ } else {
+ # Generic BCM94704
+ c["vlan0ports"] = "0 1 2 3 4 5u"
+ c["vlan1ports"] = ""
+ c["lan_ifname"] = "eth0"
+ c["wan_ifname"] = "eth1"
+
+ # MAC addresses on 4704 tend to be screwed up. Add a workaround here
+ if (nvram["et0macaddr"] ~ mac_check) {
+ c["lan_macaddr"] = nvram["et0macaddr"]
+ c["wan_macaddr"] = macinc(c["lan_macaddr"])
+ }
+ }
+ }
+ # Buffalo WBR-B11 and Buffalo WBR-G54
+ if (nvram["boardtype"] == "bcm94710ap") {
+ c["vlan0ports"] = "0 1 2 3 4 5u"
+ c["vlan1ports"] = ""
+ c["lan_ifname"] = "eth0"
+ c["wan_ifname"] = "eth1"
+ }
+ # generic broadcom 4705/4785 processor with 5397 switch?
+ # EXCEPT Linksys WRT300N V1.1
+ if ((nvram["boardtype"] == "0x478") && \
+ (model != "Linksys WRT300N V1.1")) {
+ c["vlan0ports"] = "1 2 3 4 8*"
+ c["vlan1ports"] = "0 8"
+ }
+
+ # WAP54G
+ if ((nvram["boardnum"] == "2") || \
+ (nvram["boardnum"] == "1024")) {
+ c["lan_ifname"]="eth0"
+ c["wan_ifname"]=""
+ }
+
+ # Sitecom WL-105b
+ if ((nvram["boardum"] == "2") && \
+ (nvram["GemtekPmonVer"] == "1")) {
+ c["lan_ifname"]="eth0"
+ c["wan_ifname"]=""
+ }
+
+ # ASUS WL-700gE
+ # These are actually same as defaults above. For some reason this script applies
+ # Generic BCM94704 settings instead so we revert to proper settings here.
+ # Hopefully someone will fix this properly soon.
+ if (model == "ASUS WL-700gE") {
+ c["lan_ifname"]="eth0.0"
+ c["wan_ifname"]="eth0.1"
+ c["vlan0ports"]="1 2 3 4 5"
+ c["vlan1ports"]="0 5"
+ }
+
+ if (model == "Motorola WR850G V2/V3") {
+ c["vlan0ports"]="0 1 2 3 5"
+ c["vlan1ports"]="4 5"
+ }
+ if (model == "ASUS WL-500W") {
+ c["lan_ifname"] = "eth0"
+ c["wan_ifname"] = "eth1"
+ c["vlan0ports"] = "0 1 2 3 4 5u"
+ c["vlan1ports"] = ""
+ }
+ if (model == "OvisLink WL-1600GL") {
+ c["lan_ifname"] = "eth0.0"
+ c["wan_ifname"] = "eth0.1"
+ c["vlan0ports"] = "0 1 2 3 5"
+ c["vlan1ports"] = "4 5"
+ }
+
+ if (c["vlan0ports"] || c["vlan1ports"]) {
+ print "#### VLAN configuration "
+ print "config switch eth0"
+ print " option enable 1"
+ print ""
+ vlan(0, "vlan0ports")
+ vlan(1, "vlan1ports")
+ }
+ print "#### Loopback configuration"
+ print "config interface loopback"
+ print " option ifname \"lo\""
+ print " option proto static"
+ print " option ipaddr 127.0.0.1"
+ print " option netmask 255.0.0.0"
+ print ""
+ print ""
+ print "#### LAN configuration"
+ print "config interface lan"
+ print " option type bridge"
+ p("ifname", "lan_ifname")
+ p("macaddr", "lan_macaddr")
+ print " option proto static"
+ print " option ipaddr 192.168.1.1"
+ print " option netmask 255.255.255.0"
+ print ""
+ print ""
+ if (c["wan_ifname"]) {
+ print "#### WAN configuration"
+ print "config interface wan"
+ p("ifname", "wan_ifname")
+ p("macaddr", "wan_macaddr")
+ print " option proto dhcp"
+ } else {
+ print "#### WAN configuration (disabled)"
+ print "#config interface wan"
+ print "# option proto dhcp"
+ }
+ }' > /etc/config/network
+}
--- /dev/null
+#!/bin/sh /etc/rc.common
+# Copyright (C) 2010 OpenWrt.org
+
+START=41
+
+boot() {
+ [ -d /sys/class/ieee80211 ] || exit
+
+ commit=0
+
+ fixup_wmac() {
+ local cfg="$1"
+ local cfmac
+
+ config_get cfmac "$cfg" macaddr
+
+ [ "$cfmac" != "00:90:4c:5f:00:2a" ] || {
+ local nvmac="$(nvram get il0macaddr 2>/dev/null)"
+ [ -n "$nvmac" ] && [ "$nvmac != "$cfmac ] && {
+ uci set wireless.$cfg.macaddr="$nvmac"
+ commit=1
+ }
+ }
+ }
+
+ config_load wireless
+ config_foreach fixup_wmac wifi-device
+
+ [ "$commit" = 1 ] && uci commit wireless
+}
+
+start() { :; }
+stop() { :; }
--- /dev/null
+#!/bin/sh
+
+init_hotplug_failsafe() {
+ echo '/sbin/hotplug.failsafe' > /proc/sys/kernel/hotplug
+}
+
+boot_hook_add preinit_main init_hotplug_failsafe
+
+
--- /dev/null
+#!/bin/sh
+
+set_preinit_iface() {
+ ifname=eth0
+
+ insmod diag
+
+ # hardware specific overrides
+ case "$(cat /proc/diag/model)" in
+ "Linksys WAP54G V1") ifname=eth1;;
+ "ASUS WL-HDD") ifname=eth1;;
+ "ASUS WL-300g") ifname=eth1;;
+ "ASUS (unknown, BCM4702)") ifname=eth1;;
+ "Sitecom WL-105b") ifname=eth1;;
+ esac
+ ifconfig $ifname 0.0.0.0 up
+}
+
+check_module () {
+ module="$1"; shift; params="$*"
+
+ insmod "$module" "$params"
+ sleep 1
+ grep "^$module" /proc/modules
+ return $?
+}
+
+init_iface() {
+ check_module tg3
+ insmod switch-core
+ check_module switch-robo || check_module switch-adm || {
+ check_module bcm57xx activate_gpio=0x4 && cpu_port="8u*"
+ } || rmmod switch-core
+}
+
+boot_hook_add preinit_main set_preinit_iface
+boot_hook_add preinit_main init_iface
--- /dev/null
+#!/bin/sh
+
+failsafe_ip() {
+ [ -d /proc/switch/eth0 ] && [ "$ifname" = "eth0" ] && {
+ ifconfig eth0 0.0.0.0 down
+ echo "0 1 2 3 4 ${cpu_port:-5u*}" > /proc/switch/eth0/vlan/0/ports
+ }
+
+ [ -n "$pi_ifname" ] && grep -q "$pi_ifname" /proc/net/dev && {
+ ifconfig $pi_ifname $pi_ip netmask $pi_netmask broadcast $pi_broadcast up
+ }
+}
+
+boot_hook_add failsafe failsafe_ip
+
--- /dev/null
+#!/bin/sh
+
+do_mount_procfs() {
+ mount none /proc -t proc
+}
+
--- /dev/null
+#!/bin/sh
+
+port_net_echo() {
+ [ -n "$pi_ifname" ] && grep -q "$pi_ifname" /proc/net/dev && {
+ if [ "$pi_preinit_net_messages" = "y" ] || [ "$pi_failsafe_net_message" = "true" ] && [ "$pi_preinit_no_failsafe_netmsg" != "y" ]; then
+ netmsg $pi_broadcast "$1"
+ fi
+ }
+}
+
+preinit_ip_deconfig() {
+ if [ -z "$pi_ifname" ]; then
+ ifconfig $ifname 0.0.0.0 down
+ else
+ grep -q "$pi_ifname" /proc/net/dev && {
+ ifconfig $pi_ifname 0.0.0.0 down
+ }
+ fi
+}
+
+preinit_net_echo() {
+ preinit_ip
+
+ [ -d /proc/switch/eth0 ] && [ "$pi_ifname" = "eth0" ] && {
+ echo 1 > /proc/switch/eth0/reset
+
+ # this would be easier if we blasted the message across all ports
+ # but we don't want packets leaking across interfaces
+ for port in $(seq 0 4); do {
+ echo "$port ${cpu_port:-5u*}" > /proc/switch/eth0/vlan/0/ports
+ port_net_echo $1
+ }; done
+
+ echo "0 ${cpu_port:-5u*}" > /proc/switch/eth0/vlan/0/ports
+
+ } || port_net_echo $1
+}
+
+
--- /dev/null
+#!/bin/sh
+
+indicate_failsafe() {
+ preinit_net_echo() {
+ port_net_echo $1
+ }
+ echo "- failsafe -"
+ preinit_net_echo "Entering Failsafe!\n"
+ indicate_failsafe_led
+}
+
+
--- /dev/null
+#!/bin/sh
+
+. /etc/functions.sh
+
+set_boot_wait() {
+ [ -x "/usr/sbin/nvram" ] && {
+ [ "$(nvram get boot_wait)" != "on" ] && {
+ nvram set boot_wait=on
+ nvram commit
+ }
+ }
+}
+
+boot_hook_add failsafe set_boot_wait
--- /dev/null
+PART_NAME=linux
+
+platform_check_image() {
+ [ "$ARGC" -gt 1 ] && return 1
+
+ case "$(get_magic_word "$1")" in
+ # .trx files
+ 4844) return 0;;
+ *)
+ echo "Invalid image type. Please use only .trx files"
+ return 1
+ ;;
+ esac
+}
+
+# use default for platform_do_upgrade()
--- /dev/null
+#!/bin/sh
+case "$1" in
+ button) kill -USR1 1;;
+esac
--- /dev/null
+#
+# Copyright (C) 2006-2010 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+include $(TOPDIR)/rules.mk
+include $(INCLUDE_DIR)/image.mk
+
+define Build/Clean
+ $(MAKE) -C lzma-loader clean
+endef
+
+define Image/Prepare
+ cat $(KDIR)/vmlinux | $(STAGING_DIR_HOST)/bin/lzma e -si -so -eos -lc1 -lp2 -pb2 > $(KDIR)/vmlinux.lzma
+ rm -f $(KDIR)/loader.gz
+ $(MAKE) -C lzma-loader \
+ BUILD_DIR="$(KDIR)" \
+ TARGET="$(KDIR)" \
+ clean install
+ echo -ne "\\x00" >> $(KDIR)/loader.gz
+ rm -f $(KDIR)/fs_mark
+ touch $(KDIR)/fs_mark
+ $(call prepare_generic_squashfs,$(KDIR)/fs_mark)
+endef
+
+ifneq ($(KERNEL),2.4)
+ define Image/Build/wgt634u
+ dd if=$(KDIR)/loader.elf of=$(BIN_DIR)/openwrt-wgt634u-$(2).bin bs=131072 conv=sync
+ cat $(BIN_DIR)/$(IMG_PREFIX)-$(1).trx >> $(BIN_DIR)/openwrt-wgt634u-$(2).bin
+ endef
+endif
+
+define Image/Build/CyberTAN
+ $(STAGING_DIR_HOST)/bin/addpattern -4 -p $(3) -v v$(4) -i $(BIN_DIR)/$(IMG_PREFIX)-$(1).trx -o $(BIN_DIR)/openwrt-$(2)-$(5).bin $(if $(6),-s $(6))
+endef
+define Image/Build/CyberTAN2
+ $(STAGING_DIR_HOST)/bin/addpattern -4 -p $(3) -v v$(4) -i $(BIN_DIR)/openwrt-$(2)-$(5)-sysupgrade.bin -o $(BIN_DIR)/openwrt-$(2)-$(5)-factory.bin $(if $(6),-s $(6))
+endef
+define Image/Build/CyberTANHead
+ $(STAGING_DIR_HOST)/bin/addpattern -5 -p $(3) -v v$(4) -i /dev/null -o $(KDIR)/openwrt-$(2)-header.bin $(if $(6),-s $(6))
+endef
+
+define Image/Build/Motorola
+ $(STAGING_DIR_HOST)/bin/motorola-bin -$(3) $(BIN_DIR)/$(IMG_PREFIX)-$(1).trx $(BIN_DIR)/openwrt-$(2)-$(4).bin
+endef
+
+define Image/Build/USR
+ $(STAGING_DIR_HOST)/bin/trx2usr $(BIN_DIR)/$(IMG_PREFIX)-$(1).trx $(BIN_DIR)/openwrt-$(2)-$(3).bin
+endef
+
+define trxalign/jffs2-128k
+-a 0x20000 -f $(KDIR)/root.$(1)
+endef
+define trxalign/jffs2-64k
+-a 0x10000 -f $(KDIR)/root.$(1)
+endef
+define trxalign/squashfs
+-a 1024 -f $(KDIR)/root.$(1) $(if $(2),-f $(2)) -a 0x10000 -A $(KDIR)/fs_mark
+endef
+
+define Image/Build/trxV2
+ $(call Image/Build/CyberTANHead,$(1),$(2),$(3),$(4),$(5),$(if $(6),$(6)))
+ $(STAGING_DIR_HOST)/bin/trx -2 -o $(BIN_DIR)/openwrt-$(2)-$(5)-sysupgrade.bin \
+ -f $(KDIR)/loader.gz -f $(KDIR)/vmlinux.lzma \
+ $(call trxalign/$(1),$(1),$(KDIR)/openwrt-$(2)-header.bin)
+ $(call Image/Build/CyberTAN2,$(1),$(2),$(3),$(4),$(5),$(if $(6),$(6)))
+endef
+
+define Image/Build/jffs2-128k
+ $(call Image/Build/CyberTAN,$(1),wrt54gs,W54S,4.80.1,$(patsubst jffs2-%,jffs2,$(1)))
+ $(call Image/Build/CyberTAN,$(1),wrtsl54gs,W54U,2.08.1,$(patsubst jffs2-%,jffs2,$(1)))
+ $(call Image/Build/trxV2,$(1),wrt54g3gv2-vf,3G2V,3.00.24,$(patsubst jffs2-%,jffs2,$(1)),6)
+ ifeq ($(KERNEL),2.6)
+ $(call Image/Build/wgt634u,$(1),$(patsubst jffs2-%,jffs2,$(1)))
+ endif
+endef
+
+define Image/Build/jffs2-64k
+ $(call Image/Build/CyberTAN,$(1),wrt54g3g,W54F,2.20.1,$(patsubst jffs2-%,jffs2,$(1)))
+ $(call Image/Build/CyberTAN,$(1),wrt54g3g-em,W3GN,2.20.1,$(patsubst jffs2-%,jffs2,$(1)))
+ $(call Image/Build/CyberTAN,$(1),wrt54g,W54G,4.71.1,$(patsubst jffs2-%,jffs2,$(1)))
+ $(call Image/Build/CyberTAN,$(1),wrt54gs_v4,W54s,1.09.1,$(patsubst jffs2-%,jffs2,$(1)))
+ $(call Image/Build/CyberTAN,$(1),wrt150n,N150,1.51.3,$(patsubst jffs2-%,jffs2,$(1)))
+ $(call Image/Build/CyberTAN,$(1),wrt300n_v1,EWCB,1.03.6,$(patsubst jffs2-%,jffs2,$(1)))
+ $(call Image/Build/CyberTAN,$(1),wrt300n_v11,EWC2,1.51.2,$(patsubst jffs2-%,jffs2,$(1)))
+ $(call Image/Build/CyberTAN,$(1),wrt350n_v1,EWCG,1.04.1,$(patsubst jffs2-%,jffs2,$(1)))
+ $(call Image/Build/Motorola,$(1),wa840g,2,$(patsubst jffs2-%,jffs2,$(1)))
+ $(call Image/Build/Motorola,$(1),we800g,3,$(patsubst jffs2-%,jffs2,$(1)))
+endef
+
+define Image/Build/squashfs
+ $(call Image/Build/jffs2-64k,$(1))
+ $(call Image/Build/jffs2-128k,$(1))
+endef
+
+define Image/Build/Initramfs
+ $(STAGING_DIR_HOST)/bin/trx -o $(BIN_DIR)/$(IMG_PREFIX)-initramfs.trx -f $(KDIR)/loader.gz -f $(KDIR)/vmlinux.lzma
+endef
+
+define Image/Build
+ $(STAGING_DIR_HOST)/bin/trx -o $(BIN_DIR)/$(IMG_PREFIX)-$(1).trx \
+ -f $(KDIR)/loader.gz -f $(KDIR)/vmlinux.lzma \
+ $(call trxalign/$(1),$(1))
+ $(call Image/Build/$(1),$(1))
+ $(call Image/Build/Motorola,$(1),wr850g,1,$(1))
+ $(call Image/Build/USR,$(1),usr5461,$(1))
+endef
+
+$(eval $(call BuildImage))
--- /dev/null
+#
+# Copyright (C) 2006 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME := lzma-loader
+PKG_BUILD_DIR := $(BUILD_DIR)/$(PKG_NAME)
+
+$(PKG_BUILD_DIR)/.prepared:
+ mkdir $(PKG_BUILD_DIR)
+ $(CP) ./src/* $(PKG_BUILD_DIR)/
+ touch $@
+
+$(PKG_BUILD_DIR)/loader.gz: $(PKG_BUILD_DIR)/.prepared
+ $(MAKE) -C $(PKG_BUILD_DIR) CC="$(TARGET_CC)" \
+ LD="$(TARGET_CROSS)ld" CROSS_COMPILE="$(TARGET_CROSS)"
+
+download:
+prepare: $(PKG_BUILD_DIR)/.prepared
+compile: $(PKG_BUILD_DIR)/loader.gz
+install:
+
+ifneq ($(TARGET),)
+install: compile
+ $(CP) $(PKG_BUILD_DIR)/loader.gz $(PKG_BUILD_DIR)/loader.elf $(TARGET)/
+endif
+
+clean:
+ rm -rf $(PKG_BUILD_DIR)
--- /dev/null
+/*
+ LzmaDecode.c
+ LZMA Decoder
+
+ LZMA SDK 4.05 Copyright (c) 1999-2004 Igor Pavlov (2004-08-25)
+ http://www.7-zip.org/
+
+ LZMA SDK is licensed under two licenses:
+ 1) GNU Lesser General Public License (GNU LGPL)
+ 2) Common Public License (CPL)
+ It means that you can select one of these two licenses and
+ follow rules of that license.
+
+ SPECIAL EXCEPTION:
+ Igor Pavlov, as the author of this code, expressly permits you to
+ statically or dynamically link your code (or bind by name) to the
+ interfaces of this file without subjecting your linked code to the
+ terms of the CPL or GNU LGPL. Any modifications or additions
+ to this file, however, are subject to the LGPL or CPL terms.
+*/
+
+#include "LzmaDecode.h"
+
+#ifndef Byte
+#define Byte unsigned char
+#endif
+
+#define kNumTopBits 24
+#define kTopValue ((UInt32)1 << kNumTopBits)
+
+#define kNumBitModelTotalBits 11
+#define kBitModelTotal (1 << kNumBitModelTotalBits)
+#define kNumMoveBits 5
+
+typedef struct _CRangeDecoder
+{
+ Byte *Buffer;
+ Byte *BufferLim;
+ UInt32 Range;
+ UInt32 Code;
+ #ifdef _LZMA_IN_CB
+ ILzmaInCallback *InCallback;
+ int Result;
+ #endif
+ int ExtraBytes;
+} CRangeDecoder;
+
+Byte RangeDecoderReadByte(CRangeDecoder *rd)
+{
+ if (rd->Buffer == rd->BufferLim)
+ {
+ #ifdef _LZMA_IN_CB
+ UInt32 size;
+ rd->Result = rd->InCallback->Read(rd->InCallback, &rd->Buffer, &size);
+ rd->BufferLim = rd->Buffer + size;
+ if (size == 0)
+ #endif
+ {
+ rd->ExtraBytes = 1;
+ return 0xFF;
+ }
+ }
+ return (*rd->Buffer++);
+}
+
+/* #define ReadByte (*rd->Buffer++) */
+#define ReadByte (RangeDecoderReadByte(rd))
+
+void RangeDecoderInit(CRangeDecoder *rd,
+ #ifdef _LZMA_IN_CB
+ ILzmaInCallback *inCallback
+ #else
+ Byte *stream, UInt32 bufferSize
+ #endif
+ )
+{
+ int i;
+ #ifdef _LZMA_IN_CB
+ rd->InCallback = inCallback;
+ rd->Buffer = rd->BufferLim = 0;
+ #else
+ rd->Buffer = stream;
+ rd->BufferLim = stream + bufferSize;
+ #endif
+ rd->ExtraBytes = 0;
+ rd->Code = 0;
+ rd->Range = (0xFFFFFFFF);
+ for(i = 0; i < 5; i++)
+ rd->Code = (rd->Code << 8) | ReadByte;
+}
+
+#define RC_INIT_VAR UInt32 range = rd->Range; UInt32 code = rd->Code;
+#define RC_FLUSH_VAR rd->Range = range; rd->Code = code;
+#define RC_NORMALIZE if (range < kTopValue) { range <<= 8; code = (code << 8) | ReadByte; }
+
+UInt32 RangeDecoderDecodeDirectBits(CRangeDecoder *rd, int numTotalBits)
+{
+ RC_INIT_VAR
+ UInt32 result = 0;
+ int i;
+ for (i = numTotalBits; i > 0; i--)
+ {
+ /* UInt32 t; */
+ range >>= 1;
+
+ result <<= 1;
+ if (code >= range)
+ {
+ code -= range;
+ result |= 1;
+ }
+ /*
+ t = (code - range) >> 31;
+ t &= 1;
+ code -= range & (t - 1);
+ result = (result + result) | (1 - t);
+ */
+ RC_NORMALIZE
+ }
+ RC_FLUSH_VAR
+ return result;
+}
+
+int RangeDecoderBitDecode(CProb *prob, CRangeDecoder *rd)
+{
+ UInt32 bound = (rd->Range >> kNumBitModelTotalBits) * *prob;
+ if (rd->Code < bound)
+ {
+ rd->Range = bound;
+ *prob += (kBitModelTotal - *prob) >> kNumMoveBits;
+ if (rd->Range < kTopValue)
+ {
+ rd->Code = (rd->Code << 8) | ReadByte;
+ rd->Range <<= 8;
+ }
+ return 0;
+ }
+ else
+ {
+ rd->Range -= bound;
+ rd->Code -= bound;
+ *prob -= (*prob) >> kNumMoveBits;
+ if (rd->Range < kTopValue)
+ {
+ rd->Code = (rd->Code << 8) | ReadByte;
+ rd->Range <<= 8;
+ }
+ return 1;
+ }
+}
+
+#define RC_GET_BIT2(prob, mi, A0, A1) \
+ UInt32 bound = (range >> kNumBitModelTotalBits) * *prob; \
+ if (code < bound) \
+ { A0; range = bound; *prob += (kBitModelTotal - *prob) >> kNumMoveBits; mi <<= 1; } \
+ else \
+ { A1; range -= bound; code -= bound; *prob -= (*prob) >> kNumMoveBits; mi = (mi + mi) + 1; } \
+ RC_NORMALIZE
+
+#define RC_GET_BIT(prob, mi) RC_GET_BIT2(prob, mi, ; , ;)
+
+int RangeDecoderBitTreeDecode(CProb *probs, int numLevels, CRangeDecoder *rd)
+{
+ int mi = 1;
+ int i;
+ #ifdef _LZMA_LOC_OPT
+ RC_INIT_VAR
+ #endif
+ for(i = numLevels; i > 0; i--)
+ {
+ #ifdef _LZMA_LOC_OPT
+ CProb *prob = probs + mi;
+ RC_GET_BIT(prob, mi)
+ #else
+ mi = (mi + mi) + RangeDecoderBitDecode(probs + mi, rd);
+ #endif
+ }
+ #ifdef _LZMA_LOC_OPT
+ RC_FLUSH_VAR
+ #endif
+ return mi - (1 << numLevels);
+}
+
+int RangeDecoderReverseBitTreeDecode(CProb *probs, int numLevels, CRangeDecoder *rd)
+{
+ int mi = 1;
+ int i;
+ int symbol = 0;
+ #ifdef _LZMA_LOC_OPT
+ RC_INIT_VAR
+ #endif
+ for(i = 0; i < numLevels; i++)
+ {
+ #ifdef _LZMA_LOC_OPT
+ CProb *prob = probs + mi;
+ RC_GET_BIT2(prob, mi, ; , symbol |= (1 << i))
+ #else
+ int bit = RangeDecoderBitDecode(probs + mi, rd);
+ mi = mi + mi + bit;
+ symbol |= (bit << i);
+ #endif
+ }
+ #ifdef _LZMA_LOC_OPT
+ RC_FLUSH_VAR
+ #endif
+ return symbol;
+}
+
+Byte LzmaLiteralDecode(CProb *probs, CRangeDecoder *rd)
+{
+ int symbol = 1;
+ #ifdef _LZMA_LOC_OPT
+ RC_INIT_VAR
+ #endif
+ do
+ {
+ #ifdef _LZMA_LOC_OPT
+ CProb *prob = probs + symbol;
+ RC_GET_BIT(prob, symbol)
+ #else
+ symbol = (symbol + symbol) | RangeDecoderBitDecode(probs + symbol, rd);
+ #endif
+ }
+ while (symbol < 0x100);
+ #ifdef _LZMA_LOC_OPT
+ RC_FLUSH_VAR
+ #endif
+ return symbol;
+}
+
+Byte LzmaLiteralDecodeMatch(CProb *probs, CRangeDecoder *rd, Byte matchByte)
+{
+ int symbol = 1;
+ #ifdef _LZMA_LOC_OPT
+ RC_INIT_VAR
+ #endif
+ do
+ {
+ int bit;
+ int matchBit = (matchByte >> 7) & 1;
+ matchByte <<= 1;
+ #ifdef _LZMA_LOC_OPT
+ {
+ CProb *prob = probs + ((1 + matchBit) << 8) + symbol;
+ RC_GET_BIT2(prob, symbol, bit = 0, bit = 1)
+ }
+ #else
+ bit = RangeDecoderBitDecode(probs + ((1 + matchBit) << 8) + symbol, rd);
+ symbol = (symbol << 1) | bit;
+ #endif
+ if (matchBit != bit)
+ {
+ while (symbol < 0x100)
+ {
+ #ifdef _LZMA_LOC_OPT
+ CProb *prob = probs + symbol;
+ RC_GET_BIT(prob, symbol)
+ #else
+ symbol = (symbol + symbol) | RangeDecoderBitDecode(probs + symbol, rd);
+ #endif
+ }
+ break;
+ }
+ }
+ while (symbol < 0x100);
+ #ifdef _LZMA_LOC_OPT
+ RC_FLUSH_VAR
+ #endif
+ return symbol;
+}
+
+#define kNumPosBitsMax 4
+#define kNumPosStatesMax (1 << kNumPosBitsMax)
+
+#define kLenNumLowBits 3
+#define kLenNumLowSymbols (1 << kLenNumLowBits)
+#define kLenNumMidBits 3
+#define kLenNumMidSymbols (1 << kLenNumMidBits)
+#define kLenNumHighBits 8
+#define kLenNumHighSymbols (1 << kLenNumHighBits)
+
+#define LenChoice 0
+#define LenChoice2 (LenChoice + 1)
+#define LenLow (LenChoice2 + 1)
+#define LenMid (LenLow + (kNumPosStatesMax << kLenNumLowBits))
+#define LenHigh (LenMid + (kNumPosStatesMax << kLenNumMidBits))
+#define kNumLenProbs (LenHigh + kLenNumHighSymbols)
+
+int LzmaLenDecode(CProb *p, CRangeDecoder *rd, int posState)
+{
+ if(RangeDecoderBitDecode(p + LenChoice, rd) == 0)
+ return RangeDecoderBitTreeDecode(p + LenLow +
+ (posState << kLenNumLowBits), kLenNumLowBits, rd);
+ if(RangeDecoderBitDecode(p + LenChoice2, rd) == 0)
+ return kLenNumLowSymbols + RangeDecoderBitTreeDecode(p + LenMid +
+ (posState << kLenNumMidBits), kLenNumMidBits, rd);
+ return kLenNumLowSymbols + kLenNumMidSymbols +
+ RangeDecoderBitTreeDecode(p + LenHigh, kLenNumHighBits, rd);
+}
+
+#define kNumStates 12
+
+#define kStartPosModelIndex 4
+#define kEndPosModelIndex 14
+#define kNumFullDistances (1 << (kEndPosModelIndex >> 1))
+
+#define kNumPosSlotBits 6
+#define kNumLenToPosStates 4
+
+#define kNumAlignBits 4
+#define kAlignTableSize (1 << kNumAlignBits)
+
+#define kMatchMinLen 2
+
+#define IsMatch 0
+#define IsRep (IsMatch + (kNumStates << kNumPosBitsMax))
+#define IsRepG0 (IsRep + kNumStates)
+#define IsRepG1 (IsRepG0 + kNumStates)
+#define IsRepG2 (IsRepG1 + kNumStates)
+#define IsRep0Long (IsRepG2 + kNumStates)
+#define PosSlot (IsRep0Long + (kNumStates << kNumPosBitsMax))
+#define SpecPos (PosSlot + (kNumLenToPosStates << kNumPosSlotBits))
+#define Align (SpecPos + kNumFullDistances - kEndPosModelIndex)
+#define LenCoder (Align + kAlignTableSize)
+#define RepLenCoder (LenCoder + kNumLenProbs)
+#define Literal (RepLenCoder + kNumLenProbs)
+
+#if Literal != LZMA_BASE_SIZE
+StopCompilingDueBUG
+#endif
+
+#ifdef _LZMA_OUT_READ
+
+typedef struct _LzmaVarState
+{
+ CRangeDecoder RangeDecoder;
+ Byte *Dictionary;
+ UInt32 DictionarySize;
+ UInt32 DictionaryPos;
+ UInt32 GlobalPos;
+ UInt32 Reps[4];
+ int lc;
+ int lp;
+ int pb;
+ int State;
+ int PreviousIsMatch;
+ int RemainLen;
+} LzmaVarState;
+
+int LzmaDecoderInit(
+ unsigned char *buffer, UInt32 bufferSize,
+ int lc, int lp, int pb,
+ unsigned char *dictionary, UInt32 dictionarySize,
+ #ifdef _LZMA_IN_CB
+ ILzmaInCallback *inCallback
+ #else
+ unsigned char *inStream, UInt32 inSize
+ #endif
+ )
+{
+ LzmaVarState *vs = (LzmaVarState *)buffer;
+ CProb *p = (CProb *)(buffer + sizeof(LzmaVarState));
+ UInt32 numProbs = Literal + ((UInt32)LZMA_LIT_SIZE << (lc + lp));
+ UInt32 i;
+ if (bufferSize < numProbs * sizeof(CProb) + sizeof(LzmaVarState))
+ return LZMA_RESULT_NOT_ENOUGH_MEM;
+ vs->Dictionary = dictionary;
+ vs->DictionarySize = dictionarySize;
+ vs->DictionaryPos = 0;
+ vs->GlobalPos = 0;
+ vs->Reps[0] = vs->Reps[1] = vs->Reps[2] = vs->Reps[3] = 1;
+ vs->lc = lc;
+ vs->lp = lp;
+ vs->pb = pb;
+ vs->State = 0;
+ vs->PreviousIsMatch = 0;
+ vs->RemainLen = 0;
+ dictionary[dictionarySize - 1] = 0;
+ for (i = 0; i < numProbs; i++)
+ p[i] = kBitModelTotal >> 1;
+ RangeDecoderInit(&vs->RangeDecoder,
+ #ifdef _LZMA_IN_CB
+ inCallback
+ #else
+ inStream, inSize
+ #endif
+ );
+ return LZMA_RESULT_OK;
+}
+
+int LzmaDecode(unsigned char *buffer,
+ unsigned char *outStream, UInt32 outSize,
+ UInt32 *outSizeProcessed)
+{
+ LzmaVarState *vs = (LzmaVarState *)buffer;
+ CProb *p = (CProb *)(buffer + sizeof(LzmaVarState));
+ CRangeDecoder rd = vs->RangeDecoder;
+ int state = vs->State;
+ int previousIsMatch = vs->PreviousIsMatch;
+ Byte previousByte;
+ UInt32 rep0 = vs->Reps[0], rep1 = vs->Reps[1], rep2 = vs->Reps[2], rep3 = vs->Reps[3];
+ UInt32 nowPos = 0;
+ UInt32 posStateMask = (1 << (vs->pb)) - 1;
+ UInt32 literalPosMask = (1 << (vs->lp)) - 1;
+ int lc = vs->lc;
+ int len = vs->RemainLen;
+ UInt32 globalPos = vs->GlobalPos;
+
+ Byte *dictionary = vs->Dictionary;
+ UInt32 dictionarySize = vs->DictionarySize;
+ UInt32 dictionaryPos = vs->DictionaryPos;
+
+ if (len == -1)
+ {
+ *outSizeProcessed = 0;
+ return LZMA_RESULT_OK;
+ }
+
+ while(len > 0 && nowPos < outSize)
+ {
+ UInt32 pos = dictionaryPos - rep0;
+ if (pos >= dictionarySize)
+ pos += dictionarySize;
+ outStream[nowPos++] = dictionary[dictionaryPos] = dictionary[pos];
+ if (++dictionaryPos == dictionarySize)
+ dictionaryPos = 0;
+ len--;
+ }
+ if (dictionaryPos == 0)
+ previousByte = dictionary[dictionarySize - 1];
+ else
+ previousByte = dictionary[dictionaryPos - 1];
+#else
+
+int LzmaDecode(
+ Byte *buffer, UInt32 bufferSize,
+ int lc, int lp, int pb,
+ #ifdef _LZMA_IN_CB
+ ILzmaInCallback *inCallback,
+ #else
+ unsigned char *inStream, UInt32 inSize,
+ #endif
+ unsigned char *outStream, UInt32 outSize,
+ UInt32 *outSizeProcessed)
+{
+ UInt32 numProbs = Literal + ((UInt32)LZMA_LIT_SIZE << (lc + lp));
+ CProb *p = (CProb *)buffer;
+ CRangeDecoder rd;
+ UInt32 i;
+ int state = 0;
+ int previousIsMatch = 0;
+ Byte previousByte = 0;
+ UInt32 rep0 = 1, rep1 = 1, rep2 = 1, rep3 = 1;
+ UInt32 nowPos = 0;
+ UInt32 posStateMask = (1 << pb) - 1;
+ UInt32 literalPosMask = (1 << lp) - 1;
+ int len = 0;
+ if (bufferSize < numProbs * sizeof(CProb))
+ return LZMA_RESULT_NOT_ENOUGH_MEM;
+ for (i = 0; i < numProbs; i++)
+ p[i] = kBitModelTotal >> 1;
+ RangeDecoderInit(&rd,
+ #ifdef _LZMA_IN_CB
+ inCallback
+ #else
+ inStream, inSize
+ #endif
+ );
+#endif
+
+ *outSizeProcessed = 0;
+ while(nowPos < outSize)
+ {
+ int posState = (int)(
+ (nowPos
+ #ifdef _LZMA_OUT_READ
+ + globalPos
+ #endif
+ )
+ & posStateMask);
+ #ifdef _LZMA_IN_CB
+ if (rd.Result != LZMA_RESULT_OK)
+ return rd.Result;
+ #endif
+ if (rd.ExtraBytes != 0)
+ return LZMA_RESULT_DATA_ERROR;
+ if (RangeDecoderBitDecode(p + IsMatch + (state << kNumPosBitsMax) + posState, &rd) == 0)
+ {
+ CProb *probs = p + Literal + (LZMA_LIT_SIZE *
+ (((
+ (nowPos
+ #ifdef _LZMA_OUT_READ
+ + globalPos
+ #endif
+ )
+ & literalPosMask) << lc) + (previousByte >> (8 - lc))));
+
+ if (state < 4) state = 0;
+ else if (state < 10) state -= 3;
+ else state -= 6;
+ if (previousIsMatch)
+ {
+ Byte matchByte;
+ #ifdef _LZMA_OUT_READ
+ UInt32 pos = dictionaryPos - rep0;
+ if (pos >= dictionarySize)
+ pos += dictionarySize;
+ matchByte = dictionary[pos];
+ #else
+ matchByte = outStream[nowPos - rep0];
+ #endif
+ previousByte = LzmaLiteralDecodeMatch(probs, &rd, matchByte);
+ previousIsMatch = 0;
+ }
+ else
+ previousByte = LzmaLiteralDecode(probs, &rd);
+ outStream[nowPos++] = previousByte;
+ #ifdef _LZMA_OUT_READ
+ dictionary[dictionaryPos] = previousByte;
+ if (++dictionaryPos == dictionarySize)
+ dictionaryPos = 0;
+ #endif
+ }
+ else
+ {
+ previousIsMatch = 1;
+ if (RangeDecoderBitDecode(p + IsRep + state, &rd) == 1)
+ {
+ if (RangeDecoderBitDecode(p + IsRepG0 + state, &rd) == 0)
+ {
+ if (RangeDecoderBitDecode(p + IsRep0Long + (state << kNumPosBitsMax) + posState, &rd) == 0)
+ {
+ #ifdef _LZMA_OUT_READ
+ UInt32 pos;
+ #endif
+ if (
+ (nowPos
+ #ifdef _LZMA_OUT_READ
+ + globalPos
+ #endif
+ )
+ == 0)
+ return LZMA_RESULT_DATA_ERROR;
+ state = state < 7 ? 9 : 11;
+ #ifdef _LZMA_OUT_READ
+ pos = dictionaryPos - rep0;
+ if (pos >= dictionarySize)
+ pos += dictionarySize;
+ previousByte = dictionary[pos];
+ dictionary[dictionaryPos] = previousByte;
+ if (++dictionaryPos == dictionarySize)
+ dictionaryPos = 0;
+ #else
+ previousByte = outStream[nowPos - rep0];
+ #endif
+ outStream[nowPos++] = previousByte;
+ continue;
+ }
+ }
+ else
+ {
+ UInt32 distance;
+ if(RangeDecoderBitDecode(p + IsRepG1 + state, &rd) == 0)
+ distance = rep1;
+ else
+ {
+ if(RangeDecoderBitDecode(p + IsRepG2 + state, &rd) == 0)
+ distance = rep2;
+ else
+ {
+ distance = rep3;
+ rep3 = rep2;
+ }
+ rep2 = rep1;
+ }
+ rep1 = rep0;
+ rep0 = distance;
+ }
+ len = LzmaLenDecode(p + RepLenCoder, &rd, posState);
+ state = state < 7 ? 8 : 11;
+ }
+ else
+ {
+ int posSlot;
+ rep3 = rep2;
+ rep2 = rep1;
+ rep1 = rep0;
+ state = state < 7 ? 7 : 10;
+ len = LzmaLenDecode(p + LenCoder, &rd, posState);
+ posSlot = RangeDecoderBitTreeDecode(p + PosSlot +
+ ((len < kNumLenToPosStates ? len : kNumLenToPosStates - 1) <<
+ kNumPosSlotBits), kNumPosSlotBits, &rd);
+ if (posSlot >= kStartPosModelIndex)
+ {
+ int numDirectBits = ((posSlot >> 1) - 1);
+ rep0 = ((2 | ((UInt32)posSlot & 1)) << numDirectBits);
+ if (posSlot < kEndPosModelIndex)
+ {
+ rep0 += RangeDecoderReverseBitTreeDecode(
+ p + SpecPos + rep0 - posSlot - 1, numDirectBits, &rd);
+ }
+ else
+ {
+ rep0 += RangeDecoderDecodeDirectBits(&rd,
+ numDirectBits - kNumAlignBits) << kNumAlignBits;
+ rep0 += RangeDecoderReverseBitTreeDecode(p + Align, kNumAlignBits, &rd);
+ }
+ }
+ else
+ rep0 = posSlot;
+ rep0++;
+ }
+ if (rep0 == (UInt32)(0))
+ {
+ /* it's for stream version */
+ len = -1;
+ break;
+ }
+ if (rep0 > nowPos
+ #ifdef _LZMA_OUT_READ
+ + globalPos
+ #endif
+ )
+ {
+ return LZMA_RESULT_DATA_ERROR;
+ }
+ len += kMatchMinLen;
+ do
+ {
+ #ifdef _LZMA_OUT_READ
+ UInt32 pos = dictionaryPos - rep0;
+ if (pos >= dictionarySize)
+ pos += dictionarySize;
+ previousByte = dictionary[pos];
+ dictionary[dictionaryPos] = previousByte;
+ if (++dictionaryPos == dictionarySize)
+ dictionaryPos = 0;
+ #else
+ previousByte = outStream[nowPos - rep0];
+ #endif
+ outStream[nowPos++] = previousByte;
+ len--;
+ }
+ while(len > 0 && nowPos < outSize);
+ }
+ }
+
+ #ifdef _LZMA_OUT_READ
+ vs->RangeDecoder = rd;
+ vs->DictionaryPos = dictionaryPos;
+ vs->GlobalPos = globalPos + nowPos;
+ vs->Reps[0] = rep0;
+ vs->Reps[1] = rep1;
+ vs->Reps[2] = rep2;
+ vs->Reps[3] = rep3;
+ vs->State = state;
+ vs->PreviousIsMatch = previousIsMatch;
+ vs->RemainLen = len;
+ #endif
+
+ *outSizeProcessed = nowPos;
+ return LZMA_RESULT_OK;
+}
--- /dev/null
+/*
+ LzmaDecode.h
+ LZMA Decoder interface
+
+ LZMA SDK 4.05 Copyright (c) 1999-2004 Igor Pavlov (2004-08-25)
+ http://www.7-zip.org/
+
+ LZMA SDK is licensed under two licenses:
+ 1) GNU Lesser General Public License (GNU LGPL)
+ 2) Common Public License (CPL)
+ It means that you can select one of these two licenses and
+ follow rules of that license.
+
+ SPECIAL EXCEPTION:
+ Igor Pavlov, as the author of this code, expressly permits you to
+ statically or dynamically link your code (or bind by name) to the
+ interfaces of this file without subjecting your linked code to the
+ terms of the CPL or GNU LGPL. Any modifications or additions
+ to this file, however, are subject to the LGPL or CPL terms.
+*/
+
+#ifndef __LZMADECODE_H
+#define __LZMADECODE_H
+
+/* #define _LZMA_IN_CB */
+/* Use callback for input data */
+
+/* #define _LZMA_OUT_READ */
+/* Use read function for output data */
+
+/* #define _LZMA_PROB32 */
+/* It can increase speed on some 32-bit CPUs,
+ but memory usage will be doubled in that case */
+
+/* #define _LZMA_LOC_OPT */
+/* Enable local speed optimizations inside code */
+
+#ifndef UInt32
+#ifdef _LZMA_UINT32_IS_ULONG
+#define UInt32 unsigned long
+#else
+#define UInt32 unsigned int
+#endif
+#endif
+
+#ifdef _LZMA_PROB32
+#define CProb UInt32
+#else
+#define CProb unsigned short
+#endif
+
+#define LZMA_RESULT_OK 0
+#define LZMA_RESULT_DATA_ERROR 1
+#define LZMA_RESULT_NOT_ENOUGH_MEM 2
+
+#ifdef _LZMA_IN_CB
+typedef struct _ILzmaInCallback
+{
+ int (*Read)(void *object, unsigned char **buffer, UInt32 *bufferSize);
+} ILzmaInCallback;
+#endif
+
+#define LZMA_BASE_SIZE 1846
+#define LZMA_LIT_SIZE 768
+
+/*
+bufferSize = (LZMA_BASE_SIZE + (LZMA_LIT_SIZE << (lc + lp)))* sizeof(CProb)
+bufferSize += 100 in case of _LZMA_OUT_READ
+by default CProb is unsigned short,
+but if specify _LZMA_PROB_32, CProb will be UInt32(unsigned int)
+*/
+
+#ifdef _LZMA_OUT_READ
+int LzmaDecoderInit(
+ unsigned char *buffer, UInt32 bufferSize,
+ int lc, int lp, int pb,
+ unsigned char *dictionary, UInt32 dictionarySize,
+ #ifdef _LZMA_IN_CB
+ ILzmaInCallback *inCallback
+ #else
+ unsigned char *inStream, UInt32 inSize
+ #endif
+);
+#endif
+
+int LzmaDecode(
+ unsigned char *buffer,
+ #ifndef _LZMA_OUT_READ
+ UInt32 bufferSize,
+ int lc, int lp, int pb,
+ #ifdef _LZMA_IN_CB
+ ILzmaInCallback *inCallback,
+ #else
+ unsigned char *inStream, UInt32 inSize,
+ #endif
+ #endif
+ unsigned char *outStream, UInt32 outSize,
+ UInt32 *outSizeProcessed);
+
+#endif
--- /dev/null
+#
+# Makefile for Broadcom BCM947XX boards
+#
+# Copyright 2001-2003, Broadcom Corporation
+# All Rights Reserved.
+#
+# THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
+# KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
+# SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
+# FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
+#
+# Copyright 2004 Manuel Novoa III <mjn3@codepoet.org>
+# Modified to support bzip'd kernels.
+# Of course, it would be better to integrate bunzip capability into CFE.
+#
+# Copyright 2005 Oleg I. Vdovikin <oleg@cs.msu.su>
+# Cleaned up, modified for lzma support, removed from kernel
+#
+
+TEXT_START := 0x80001000
+BZ_TEXT_START := 0x80400000
+
+OBJCOPY := $(CROSS_COMPILE)objcopy -O binary -R .reginfo -R .note -R .comment -R .mdebug -S
+
+CFLAGS = -D__KERNEL__ -Wall -Wstrict-prototypes -Wno-trigraphs -Os \
+ -fno-strict-aliasing -fno-common -fomit-frame-pointer -G 0 -mno-abicalls -fno-pic \
+ -ffunction-sections -pipe -mlong-calls -fno-common \
+ -mabi=32 -march=mips32 -Wa,-32 -Wa,-march=mips32 -Wa,-mips32 -Wa,--trap
+CFLAGS += -DLOADADDR=$(TEXT_START) -D_LZMA_IN_CB
+
+ASFLAGS = $(CFLAGS) -D__ASSEMBLY__ -DBZ_TEXT_START=$(BZ_TEXT_START)
+
+SEDFLAGS := s/BZ_TEXT_START/$(BZ_TEXT_START)/;s/TEXT_START/$(TEXT_START)/
+
+OBJECTS := head.o data.o
+
+all: loader.gz loader.elf
+
+# Don't build dependencies, this may die if $(CC) isn't gcc
+dep:
+
+install:
+
+loader.gz: loader
+ gzip -nc9 $< > $@
+
+loader.elf: loader.o
+ cp $< $@
+
+loader: loader.o
+ $(OBJCOPY) $< $@
+
+loader.o: loader.lds $(OBJECTS)
+ $(LD) -static --gc-sections -no-warn-mismatch -T loader.lds -o $@ $(OBJECTS)
+
+loader.lds: loader.lds.in Makefile
+ @sed "$(SEDFLAGS)" < $< > $@
+
+data.o: data.lds decompress.image
+ $(LD) -no-warn-mismatch -T data.lds -r -o $@ -b binary decompress.image -b elf32-tradlittlemips
+
+data.lds:
+ @echo "SECTIONS { .data : { code_start = .; *(.data) code_stop = .; }}" > $@
+
+decompress.image: decompress
+ $(OBJCOPY) $< $@
+
+decompress: decompress.lds decompress.o LzmaDecode.o
+ $(LD) -static --gc-sections -no-warn-mismatch -T decompress.lds -o $@ decompress.o LzmaDecode.o
+
+decompress.lds: decompress.lds.in Makefile
+ @sed "$(SEDFLAGS)" < $< > $@
+
+mrproper: clean
+
+clean:
+ rm -f loader.gz loader decompress *.lds *.o *.image
--- /dev/null
+/*
+ * LZMA compressed kernel decompressor for bcm947xx boards
+ *
+ * Copyright (C) 2005 by Oleg I. Vdovikin <oleg@cs.msu.su>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+The code is intended to decompress kernel, being compressed using lzma utility
+build using 7zip LZMA SDK. This utility is located in the LZMA_Alone directory
+
+decompressor code expects that your .trx file consist of three partitions:
+
+1) decompressor itself (this is gziped code which pmon/cfe will extract and run
+on boot-up instead of real kernel)
+2) LZMA compressed kernel (both streamed and regular modes are supported now)
+3) Root filesystem
+
+Please be sure to apply the following patch for use this new trx layout (it will
+allow using both new and old trx files for root filesystem lookup code)
+
+--- linuz/arch/mips/brcm-boards/bcm947xx/setup.c 2005-01-23 19:24:27.503322896 +0300
++++ linux/arch/mips/brcm-boards/bcm947xx/setup.c 2005-01-23 19:29:05.237100944 +0300
+@@ -221,7 +221,9 @@
+ /* Try looking at TRX header for rootfs offset */
+ if (le32_to_cpu(trx->magic) == TRX_MAGIC) {
+ bcm947xx_parts[1].offset = off;
+- if (le32_to_cpu(trx->offsets[1]) > off)
++ if (le32_to_cpu(trx->offsets[2]) > off)
++ off = le32_to_cpu(trx->offsets[2]);
++ else if (le32_to_cpu(trx->offsets[1]) > off)
+ off = le32_to_cpu(trx->offsets[1]);
+ continue;
+ }
+
+
+Revision history:
+ 0.02 Initial release
+ 0.03 Added Mineharu Takahara <mtakahar@yahoo.com> patch to pass actual
+ output size to decoder (stream mode compressed input is not
+ a requirement anymore)
+ 0.04 Reordered functions using lds script
--- /dev/null
+/*
+ * LZMA compressed kernel decompressor for bcm947xx boards
+ *
+ * Copyright (C) 2005 by Oleg I. Vdovikin <oleg@cs.msu.su>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ *
+ * Please note, this was code based on the bunzip2 decompressor code
+ * by Manuel Novoa III (mjn3@codepoet.org), although the only thing left
+ * is an idea and part of original vendor code
+ *
+ *
+ * 12-Mar-2005 Mineharu Takahara <mtakahar@yahoo.com>
+ * pass actual output size to decoder (stream mode
+ * compressed input is not a requirement anymore)
+ *
+ * 24-Apr-2005 Oleg I. Vdovikin
+ * reordered functions using lds script, removed forward decl
+ *
+ */
+
+#include "LzmaDecode.h"
+
+#define BCM4710_FLASH 0x1fc00000 /* Flash */
+
+#define KSEG0 0x80000000
+#define KSEG1 0xa0000000
+
+#define KSEG1ADDR(a) ((((unsigned)(a)) & 0x1fffffffU) | KSEG1)
+
+#define Index_Invalidate_I 0x00
+#define Index_Writeback_Inv_D 0x01
+
+#define cache_unroll(base,op) \
+ __asm__ __volatile__( \
+ ".set noreorder;\n" \
+ ".set mips3;\n" \
+ "cache %1, (%0);\n" \
+ ".set mips0;\n" \
+ ".set reorder\n" \
+ : \
+ : "r" (base), \
+ "i" (op));
+
+static __inline__ void blast_icache(unsigned long size, unsigned long lsize)
+{
+ unsigned long start = KSEG0;
+ unsigned long end = (start + size);
+
+ while(start < end) {
+ cache_unroll(start,Index_Invalidate_I);
+ start += lsize;
+ }
+}
+
+static __inline__ void blast_dcache(unsigned long size, unsigned long lsize)
+{
+ unsigned long start = KSEG0;
+ unsigned long end = (start + size);
+
+ while(start < end) {
+ cache_unroll(start,Index_Writeback_Inv_D);
+ start += lsize;
+ }
+}
+
+#define TRX_MAGIC 0x30524448 /* "HDR0" */
+
+struct trx_header {
+ unsigned int magic; /* "HDR0" */
+ unsigned int len; /* Length of file including header */
+ unsigned int crc32; /* 32-bit CRC from flag_version to end of file */
+ unsigned int flag_version; /* 0:15 flags, 16:31 version */
+ unsigned int offsets[3]; /* Offsets of partitions from start of header */
+};
+
+/* beyound the image end, size not known in advance */
+extern unsigned char workspace[];
+
+unsigned int offset;
+unsigned char *data;
+
+/* flash access should be aligned, so wrapper is used */
+/* read byte from the flash, all accesses are 32-bit aligned */
+static int read_byte(void *object, unsigned char **buffer, UInt32 *bufferSize)
+{
+ static unsigned int val;
+
+ if (((unsigned int)offset % 4) == 0) {
+ val = *(unsigned int *)data;
+ data += 4;
+ }
+
+ *bufferSize = 1;
+ *buffer = ((unsigned char *)&val) + (offset++ & 3);
+
+ return LZMA_RESULT_OK;
+}
+
+static __inline__ unsigned char get_byte(void)
+{
+ unsigned char *buffer;
+ UInt32 fake;
+
+ return read_byte(0, &buffer, &fake), *buffer;
+}
+
+/* should be the first function */
+void entry(unsigned long icache_size, unsigned long icache_lsize,
+ unsigned long dcache_size, unsigned long dcache_lsize,
+ unsigned long fw_arg0, unsigned long fw_arg1,
+ unsigned long fw_arg2, unsigned long fw_arg3)
+{
+ unsigned int i; /* temp value */
+ unsigned int lc; /* literal context bits */
+ unsigned int lp; /* literal pos state bits */
+ unsigned int pb; /* pos state bits */
+ unsigned int osize; /* uncompressed size */
+
+ ILzmaInCallback callback;
+ callback.Read = read_byte;
+
+ /* look for trx header, 32-bit data access */
+ for (data = ((unsigned char *) KSEG1ADDR(BCM4710_FLASH));
+ ((struct trx_header *)data)->magic != TRX_MAGIC; data += 65536);
+
+ /* compressed kernel is in the partition 0 or 1 */
+ if (((struct trx_header *)data)->offsets[1] > 65536)
+ data += ((struct trx_header *)data)->offsets[0];
+ else
+ data += ((struct trx_header *)data)->offsets[1];
+
+ offset = 0;
+
+ /* lzma args */
+ i = get_byte();
+ lc = i % 9, i = i / 9;
+ lp = i % 5, pb = i / 5;
+
+ /* skip rest of the LZMA coder property */
+ for (i = 0; i < 4; i++)
+ get_byte();
+
+ /* read the lower half of uncompressed size in the header */
+ osize = ((unsigned int)get_byte()) +
+ ((unsigned int)get_byte() << 8) +
+ ((unsigned int)get_byte() << 16) +
+ ((unsigned int)get_byte() << 24);
+
+ /* skip rest of the header (upper half of uncompressed size) */
+ for (i = 0; i < 4; i++)
+ get_byte();
+
+ /* decompress kernel */
+ if (LzmaDecode(workspace, ~0, lc, lp, pb, &callback,
+ (unsigned char*)LOADADDR, osize, &i) == LZMA_RESULT_OK)
+ {
+ blast_dcache(dcache_size, dcache_lsize);
+ blast_icache(icache_size, icache_lsize);
+
+ /* Jump to load address */
+ ((void (*)(unsigned long, unsigned long, unsigned long,
+ unsigned long)) LOADADDR)(fw_arg0, fw_arg1, fw_arg2,
+ fw_arg3);
+ }
+}
--- /dev/null
+OUTPUT_ARCH(mips)
+ENTRY(entry)
+SECTIONS {
+ . = BZ_TEXT_START;
+ .text : {
+ *(.text.entry)
+ *(.text)
+ *(.rodata)
+ }
+
+ .data : {
+ *(.data)
+ }
+
+ .bss : {
+ *(.bss)
+ }
+
+ workspace = .;
+}
--- /dev/null
+/* Copyright 2005 Oleg I. Vdovikin (oleg@cs.msu.su) */
+/* cache manipulation adapted from Broadcom code */
+/* idea taken from original bunzip2 decompressor code */
+/* Copyright 2004 Manuel Novoa III (mjn3@codepoet.org) */
+/* Licensed under the linux kernel's version of the GPL.*/
+
+#include <asm/asm.h>
+#include <asm/regdef.h>
+
+#define KSEG0 0x80000000
+
+#define C0_CONFIG $16
+#define C0_TAGLO $28
+#define C0_TAGHI $29
+
+#define CONF1_DA_SHIFT 7 /* D$ associativity */
+#define CONF1_DA_MASK 0x00000380
+#define CONF1_DA_BASE 1
+#define CONF1_DL_SHIFT 10 /* D$ line size */
+#define CONF1_DL_MASK 0x00001c00
+#define CONF1_DL_BASE 2
+#define CONF1_DS_SHIFT 13 /* D$ sets/way */
+#define CONF1_DS_MASK 0x0000e000
+#define CONF1_DS_BASE 64
+#define CONF1_IA_SHIFT 16 /* I$ associativity */
+#define CONF1_IA_MASK 0x00070000
+#define CONF1_IA_BASE 1
+#define CONF1_IL_SHIFT 19 /* I$ line size */
+#define CONF1_IL_MASK 0x00380000
+#define CONF1_IL_BASE 2
+#define CONF1_IS_SHIFT 22 /* Instruction cache sets/way */
+#define CONF1_IS_MASK 0x01c00000
+#define CONF1_IS_BASE 64
+
+#define Index_Invalidate_I 0x00
+#define Index_Writeback_Inv_D 0x01
+
+ .text
+ LEAF(startup)
+ .set noreorder
+ addi sp, -48
+ sw a0, 16(sp)
+ sw a1, 20(sp)
+ sw a2, 24(sp)
+ sw a3, 28(sp)
+
+ /* Copy decompressor code to the right place */
+ li t2, BZ_TEXT_START
+ add a0, t2, 0
+ la a1, code_start
+ la a2, code_stop
+$L1:
+ lw t0, 0(a1)
+ sw t0, 0(a0)
+ add a1, 4
+ add a0, 4
+ blt a1, a2, $L1
+ nop
+
+ /* At this point we need to invalidate dcache and */
+ /* icache before jumping to new code */
+
+1: /* Get cache sizes */
+ .set mips32
+ mfc0 s0,C0_CONFIG,1
+ .set mips0
+
+ li s1,CONF1_DL_MASK
+ and s1,s0
+ beq s1,zero,nodc
+ nop
+
+ srl s1,CONF1_DL_SHIFT
+ li t0,CONF1_DL_BASE
+ sll s1,t0,s1 /* s1 has D$ cache line size */
+
+ li s2,CONF1_DA_MASK
+ and s2,s0
+ srl s2,CONF1_DA_SHIFT
+ addiu s2,CONF1_DA_BASE /* s2 now has D$ associativity */
+
+ li t0,CONF1_DS_MASK
+ and t0,s0
+ srl t0,CONF1_DS_SHIFT
+ li s3,CONF1_DS_BASE
+ sll s3,s3,t0 /* s3 has D$ sets per way */
+
+ multu s2,s3 /* sets/way * associativity */
+ mflo t0 /* total cache lines */
+
+ multu s1,t0 /* D$ linesize * lines */
+ mflo s2 /* s2 is now D$ size in bytes */
+
+ /* Initilize the D$: */
+ mtc0 zero,C0_TAGLO
+ mtc0 zero,C0_TAGHI
+
+ li t0,KSEG0 /* Just an address for the first $ line */
+ addu t1,t0,s2 /* + size of cache == end */
+
+ .set mips3
+1: cache Index_Writeback_Inv_D,0(t0)
+ .set mips0
+ bne t0,t1,1b
+ addu t0,s1
+
+nodc:
+ /* Now we get to do it all again for the I$ */
+
+ move s3,zero /* just in case there is no icache */
+ move s4,zero
+
+ li t0,CONF1_IL_MASK
+ and t0,s0
+ beq t0,zero,noic
+ nop
+
+ srl t0,CONF1_IL_SHIFT
+ li s3,CONF1_IL_BASE
+ sll s3,t0 /* s3 has I$ cache line size */
+
+ li t0,CONF1_IA_MASK
+ and t0,s0
+ srl t0,CONF1_IA_SHIFT
+ addiu s4,t0,CONF1_IA_BASE /* s4 now has I$ associativity */
+
+ li t0,CONF1_IS_MASK
+ and t0,s0
+ srl t0,CONF1_IS_SHIFT
+ li s5,CONF1_IS_BASE
+ sll s5,t0 /* s5 has I$ sets per way */
+
+ multu s4,s5 /* sets/way * associativity */
+ mflo t0 /* s4 is now total cache lines */
+
+ multu s3,t0 /* I$ linesize * lines */
+ mflo s4 /* s4 is cache size in bytes */
+
+ /* Initilize the I$: */
+ mtc0 zero,C0_TAGLO
+ mtc0 zero,C0_TAGHI
+
+ li t0,KSEG0 /* Just an address for the first $ line */
+ addu t1,t0,s4 /* + size of cache == end */
+
+ .set mips3
+1: cache Index_Invalidate_I,0(t0)
+ .set mips0
+ bne t0,t1,1b
+ addu t0,s3
+
+noic:
+ move a0,s3 /* icache line size */
+ move a1,s4 /* icache size */
+ move a2,s1 /* dcache line size */
+ jal t2
+ move a3,s2 /* dcache size */
+
+ .set reorder
+ END(startup)
--- /dev/null
+OUTPUT_ARCH(mips)
+ENTRY(startup)
+SECTIONS {
+ . = TEXT_START;
+ .text : {
+ *(.text)
+ *(.rodata)
+ }
+
+ .data : {
+ *(.data)
+ }
+
+ .bss : {
+ *(.bss)
+ }
+}
projects / openwrt / staging / chunkeey.git / commitdiff