enable a different pseudo-vlan mode in the marvell switch (uses a proprietary header...
authorFelix Fietkau <nbd@openwrt.org>
Tue, 29 Apr 2008 12:55:44 +0000 (12:55 +0000)
committerFelix Fietkau <nbd@openwrt.org>
Tue, 29 Apr 2008 12:55:44 +0000 (12:55 +0000)
SVN-Revision: 10975

target/linux/atheros/patches-2.6.23/200-ar2313_enable_mvswitch.patch
target/linux/generic-2.6/files/drivers/net/phy/mvswitch.c
target/linux/generic-2.6/files/drivers/net/phy/mvswitch.h
target/linux/generic-2.6/patches-2.6.23/630-phy_packets.patch

index b209aee0c8127eb446435c65f8c2197c6b045dab..09c17977dfc4ca735841d8f05a9141a2933ec621 100644 (file)
@@ -1,32 +1,41 @@
 Index: linux-2.6.23.16/drivers/net/ar2313/ar2313.c
 ===================================================================
---- linux-2.6.23.16.orig/drivers/net/ar2313/ar2313.c   2008-04-20 10:26:15.000000000 +0200
-+++ linux-2.6.23.16/drivers/net/ar2313/ar2313.c        2008-04-20 10:26:16.000000000 +0200
-@@ -955,7 +955,7 @@
+--- linux-2.6.23.16.orig/drivers/net/ar2313/ar2313.c   2008-04-29 14:51:39.000000000 +0200
++++ linux-2.6.23.16/drivers/net/ar2313/ar2313.c        2008-04-29 14:52:14.000000000 +0200
+@@ -219,7 +219,7 @@
+       dev->do_ioctl = &ar2313_ioctl;
+       // SAMEER: do we need this?
+-      dev->features |= NETIF_F_SG | NETIF_F_HIGHDMA;
++      dev->features |= NETIF_F_HIGHDMA | NETIF_F_HW_CSUM;
+       tasklet_init(&sp->rx_tasklet, rx_tasklet_func, (unsigned long) dev);
+       tasklet_disable(&sp->rx_tasklet);
+@@ -953,9 +953,9 @@
+                                               ((status >> DMA_RX_LEN_SHIFT) & 0x3fff) - CRC_LEN);
                                dev->stats.rx_bytes += skb->len;
-                               skb->protocol = eth_type_trans(skb, dev);
+-                              skb->protocol = eth_type_trans(skb, dev);
++
                                /* pass the packet to upper layers */
 -                              netif_rx(skb);
 +                              sp->rx(skb);
  
                                skb_new->dev = dev;
                                /* 16 bit align */
-@@ -1370,6 +1370,11 @@
+@@ -1370,6 +1370,8 @@
                return PTR_ERR(phydev);
        }
  
-+      if (phydev->netif_rx)
-+              sp->rx = phydev->netif_rx;
-+      else
-+              sp->rx = netif_rx;
++      sp->rx = phydev->netif_rx;
 +
        /* mask with MAC supported features */
        phydev->supported &= (SUPPORTED_10baseT_Half
                | SUPPORTED_10baseT_Full
 Index: linux-2.6.23.16/drivers/net/ar2313/ar2313.h
 ===================================================================
---- linux-2.6.23.16.orig/drivers/net/ar2313/ar2313.h   2008-04-20 10:26:15.000000000 +0200
-+++ linux-2.6.23.16/drivers/net/ar2313/ar2313.h        2008-04-20 10:26:16.000000000 +0200
+--- linux-2.6.23.16.orig/drivers/net/ar2313/ar2313.h   2008-04-29 14:51:39.000000000 +0200
++++ linux-2.6.23.16/drivers/net/ar2313/ar2313.h        2008-04-29 14:52:15.000000000 +0200
 @@ -107,6 +107,8 @@
   */
  struct ar2313_private {
index cb0d377d2712db44e48644b8efbfbd2b47ebff75..f28df4398972bf7bfd336b0662e9550e1b891a3c 100644 (file)
 #include <asm/uaccess.h>
 #include "mvswitch.h"
 
+/* Undefine this to use trailer mode instead.
+ * I don't know if header mode works with all chips */
+#define HEADER_MODE    1
+
 MODULE_DESCRIPTION("Marvell 88E6060 Switch driver");
 MODULE_AUTHOR("Felix Fietkau");
 MODULE_LICENSE("GPL");
@@ -55,11 +59,11 @@ w16(struct phy_device *phydev, int addr, int reg, u16 val)
        phydev->bus->write(phydev->bus, addr, reg, val);
 }
 
+
 static int
 mvswitch_mangle_tx(struct sk_buff *skb, struct net_device *dev)
 {
        struct mvswitch_priv *priv;
-       struct vlan_ethhdr *eh;
        char *buf = NULL;
        u16 vid;
 
@@ -70,30 +74,34 @@ mvswitch_mangle_tx(struct sk_buff *skb, struct net_device *dev)
        if (unlikely(skb->len < 16))
                goto error;
 
-       eh = (struct vlan_ethhdr *) skb->data;
-       if (be16_to_cpu(eh->h_vlan_proto) != 0x8100)
+#ifdef HEADER_MODE
+       if (__vlan_hwaccel_get_tag(skb, &vid))
+               goto error;
+
+       if ((skb->len <= 62) || (skb_headroom(skb) < MV_HEADER_SIZE)) {
+               if (pskb_expand_head(skb, MV_HEADER_SIZE, 0, GFP_ATOMIC))
+                       goto error_expand;
+               if (skb->len < 62)
+                       skb->len = 62;
+       }
+       buf = skb_push(skb, MV_HEADER_SIZE);
+#else
+       if (__vlan_get_tag(skb, &vid))
                goto error;
 
-       vid = be16_to_cpu(eh->h_vlan_TCI) & VLAN_VID_MASK;
        if (unlikely((vid > 15 || !priv->vlans[vid])))
                goto error;
 
        if (skb->len <= 64) {
-               if (pskb_expand_head(skb, 0, 68 - skb->len, GFP_ATOMIC)) {
-                       if (net_ratelimit())
-                               printk("%s: failed to expand/update skb for the switch\n", dev->name);
-                       goto error;
-               }
+               if (pskb_expand_head(skb, 0, 64 + MV_TRAILER_SIZE - skb->len, GFP_ATOMIC))
+                       goto error_expand;
 
                buf = skb->data + 64;
-               skb->len = 68;
+               skb->len = 64 + MV_TRAILER_SIZE;
        } else {
                if (skb_cloned(skb) || unlikely(skb_tailroom(skb) < 4)) {
-                       if (pskb_expand_head(skb, 0, 4, GFP_ATOMIC)) {
-                               if (net_ratelimit())
-                                       printk("%s: failed to expand/update skb for the switch\n", dev->name);
-                               goto error;
-                       }
+                       if (pskb_expand_head(skb, 0, 4, GFP_ATOMIC))
+                               goto error_expand;
                }
                buf = skb_put(skb, 4);
        }
@@ -103,18 +111,32 @@ mvswitch_mangle_tx(struct sk_buff *skb, struct net_device *dev)
        skb->data += 4;
        skb->len -= 4;
        skb->mac_header += 4;
+#endif
 
        if (!buf)
                goto error;
 
-       /* append the tag */
-       *((u32 *) buf) = (
-               (0x80 << 24) |
-               ((priv->vlans[vid] & 0x1f) << 16)
+
+#ifdef HEADER_MODE
+       /* prepend the tag */
+       *((__be16 *) buf) = cpu_to_be16(
+               ((vid << MV_HEADER_VLAN_S) & MV_HEADER_VLAN_M) |
+               ((priv->vlans[vid] << MV_HEADER_PORTS_S) & MV_HEADER_PORTS_M)
        );
+#else
+       /* append the tag */
+       *((__be32 *) buf) = cpu_to_be32((
+               (MV_TRAILER_OVERRIDE << MV_TRAILER_FLAGS_S) |
+               ((priv->vlans[vid] & MV_TRAILER_PORTS_M) << MV_TRAILER_PORTS_S)
+       ));
+#endif
 
        return priv->hardstart(skb, dev);
 
+error_expand:
+       if (net_ratelimit())
+               printk("%s: failed to expand/update skb for the switch\n", dev->name);
+
 error:
        /* any errors? drop the packet! */
        dev_kfree_skb_any(skb);
@@ -141,9 +163,14 @@ mvswitch_mangle_rx(struct sk_buff *skb, int napi)
        if (!priv->grp)
                goto error;
 
-       buf = skb->data + skb->len - 4;
+#ifdef HEADER_MODE
+       buf = skb->data;
+       skb_pull(skb, MV_HEADER_SIZE);
+#else
+       buf = skb->data + skb->len - MV_TRAILER_SIZE;
        if (buf[0] != 0x80)
                goto error;
+#endif
 
        /* look for the vlan matching the incoming port */
        for (i = 0; i < ARRAY_SIZE(priv->vlans); i++) {
@@ -154,6 +181,8 @@ mvswitch_mangle_rx(struct sk_buff *skb, int napi)
        if (vlan == -1)
                goto error;
 
+       skb->protocol = eth_type_trans(skb, skb->dev);
+
        if (napi)
                return vlan_hwaccel_receive_skb(skb, priv->grp, vlan);
        else
@@ -234,9 +263,13 @@ mvswitch_config_init(struct phy_device *pdev)
 
        /* initialize the cpu port */
        w16(pdev, MV_PORTREG(CONTROL, MV_CPUPORT),
-               MV_PORTCTRL_ENABLED |
+#ifdef HEADER_MODE
+               MV_PORTCTRL_HEADER |
+#else
                MV_PORTCTRL_RXTR |
-               MV_PORTCTRL_TXTR
+               MV_PORTCTRL_TXTR |
+#endif
+               MV_PORTCTRL_ENABLED
        );
        /* wait for the phy change to settle in */
        msleep(2);
@@ -300,7 +333,11 @@ mvswitch_config_init(struct phy_device *pdev)
        pdev->netif_rx = mvswitch_netif_rx;
        dev->hard_start_xmit = mvswitch_mangle_tx;
        dev->vlan_rx_register = mvswitch_vlan_rx_register;
+#ifdef HEADER_MODE
+       dev->features |= NETIF_F_HW_VLAN_RX | NETIF_F_HW_VLAN_TX;
+#else
        dev->features |= NETIF_F_HW_VLAN_RX;
+#endif
 
        return 0;
 }
index b51e84a731267c7c214db291c985e69d43dcab86..81516b708b6585f0976b1174c97c410b3d3e4baf 100644 (file)
@@ -9,6 +9,19 @@
 #ifndef __MVSWITCH_H
 #define __MVSWITCH_H
 
+#define MV_HEADER_SIZE 2
+#define MV_HEADER_PORTS_M      0x001f
+#define MV_HEADER_PORTS_S      0
+#define MV_HEADER_VLAN_M       0xf000
+#define MV_HEADER_VLAN_S       12
+
+#define MV_TRAILER_SIZE        4
+#define MV_TRAILER_PORTS_M     0x1f
+#define MV_TRAILER_PORTS_S     16
+#define MV_TRAILER_FLAGS_S     24
+#define MV_TRAILER_OVERRIDE    0x80
+
+
 #define MV_PORTS       5
 #define MV_WANPORT     4
 #define MV_CPUPORT     5
@@ -36,7 +49,7 @@ enum {
        MV_PHY_INTR_EN      = 0x12,
        MV_PHY_INTR_STATUS  = 0x13,
        MV_PHY_INTR_PORT    = 0x14,
-       MV_PHY_RECV_COUNTER = 0x15,
+       MV_PHY_RECV_COUNTER = 0x16,
        MV_PHY_LED_PARALLEL = 0x16,
        MV_PHY_LED_STREAM   = 0x17,
        MV_PHY_LED_CTRL     = 0x18,
@@ -64,6 +77,7 @@ enum {
        MV_PORTCTRL_ENABLED =  (3 << 0),
        MV_PORTCTRL_VLANTUN =  (1 << 7),        /* Enforce VLANs on packets */
        MV_PORTCTRL_RXTR    =  (1 << 8),        /* Enable Marvell packet trailer for ingress */
+       MV_PORTCTRL_HEADER      = (1 << 11),    /* Enable Marvell packet header mode for port */
        MV_PORTCTRL_TXTR    = (1 << 14),        /* Enable Marvell packet trailer for egress */
        MV_PORTCTRL_FORCEFL = (1 << 15),        /* force flow control */
 };
@@ -88,6 +102,17 @@ enum {
 };
 #define MV_SWITCHREG(_type) MV_SWITCHREGS, MV_SWITCH_##_type
 
+enum {
+       MV_SWITCHCTL_EEIE   =  (1 << 0),        /* EEPROM interrupt enable */
+       MV_SWITCHCTL_PHYIE  =  (1 << 1),        /* PHY interrupt enable */
+       MV_SWITCHCTL_ATUDONE=  (1 << 2),        /* ATU done interrupt enable */
+       MV_SWITCHCTL_ATUIE  =  (1 << 3),        /* ATU interrupt enable */
+       MV_SWITCHCTL_CTRMODE=  (1 << 8),        /* statistics for rx and tx errors */
+       MV_SWITCHCTL_RELOAD =  (1 << 9),        /* reload registers from eeprom */
+       MV_SWITCHCTL_MSIZE  = (1 << 10),        /* increase maximum frame size */
+       MV_SWITCHCTL_DROP   = (1 << 13),        /* discard frames with excessive collisions */
+};
+
 enum {
 #define MV_ATUCTL_AGETIME(_n)  ((((_n) / 16) & 0xff) << 4)
        MV_ATUCTL_ATU_256   = (0 << 12),
index 5d7f97195fbfe0abccd878f6181af60d4bba9cc4..930139b55676ff4c9bf6f7048197c30319785d59 100644 (file)
@@ -1,20 +1,39 @@
 Index: linux-2.6.23.16/drivers/net/phy/phy_device.c
 ===================================================================
---- linux-2.6.23.16.orig/drivers/net/phy/phy_device.c  2008-02-11 07:06:32.000000000 +0100
-+++ linux-2.6.23.16/drivers/net/phy/phy_device.c       2008-04-20 05:42:28.000000000 +0200
-@@ -67,6 +67,8 @@
+--- linux-2.6.23.16.orig/drivers/net/phy/phy_device.c  2008-04-20 10:16:21.000000000 +0200
++++ linux-2.6.23.16/drivers/net/phy/phy_device.c       2008-04-29 14:20:03.000000000 +0200
+@@ -44,6 +44,18 @@
+ extern int mdio_bus_init(void);
+ extern void mdio_bus_exit(void);
++static int generic_receive_skb(struct sk_buff *skb)
++{
++      skb->protocol = eth_type_trans(skb, skb->dev);
++      return netif_receive_skb(skb);
++}
++
++static int generic_rx(struct sk_buff *skb)
++{
++      skb->protocol = eth_type_trans(skb, skb->dev);
++      return netif_rx(skb);
++}
++
+ struct phy_device* phy_device_create(struct mii_bus *bus, int addr, int phy_id)
+ {
+       struct phy_device *dev;
+@@ -67,6 +79,8 @@
        dev->bus = bus;
  
        dev->state = PHY_DOWN;
-+      dev->netif_receive_skb = &netif_receive_skb;
-+      dev->netif_rx = &netif_rx;
++      dev->netif_receive_skb = &generic_receive_skb;
++      dev->netif_rx = &generic_rx;
  
        spin_lock_init(&dev->lock);
  
 Index: linux-2.6.23.16/include/linux/phy.h
 ===================================================================
---- linux-2.6.23.16.orig/include/linux/phy.h   2008-04-20 04:40:31.000000000 +0200
-+++ linux-2.6.23.16/include/linux/phy.h        2008-04-20 05:53:21.000000000 +0200
+--- linux-2.6.23.16.orig/include/linux/phy.h   2008-04-20 10:16:21.000000000 +0200
++++ linux-2.6.23.16/include/linux/phy.h        2008-04-20 10:17:58.000000000 +0200
 @@ -289,6 +289,17 @@
        void (*adjust_link)(struct net_device *dev);
  
@@ -35,8 +54,8 @@ Index: linux-2.6.23.16/include/linux/phy.h
  
 Index: linux-2.6.23.16/include/linux/netdevice.h
 ===================================================================
---- linux-2.6.23.16.orig/include/linux/netdevice.h     2008-02-11 07:06:32.000000000 +0100
-+++ linux-2.6.23.16/include/linux/netdevice.h  2008-04-20 06:33:25.000000000 +0200
+--- linux-2.6.23.16.orig/include/linux/netdevice.h     2008-04-20 10:16:21.000000000 +0200
++++ linux-2.6.23.16/include/linux/netdevice.h  2008-04-20 10:17:58.000000000 +0200
 @@ -426,6 +426,7 @@
        void                    *ax25_ptr;      /* AX.25 specific data */
        struct wireless_dev     *ieee80211_ptr; /* IEEE 802.11 specific data,