mac80211: restructure /lib/wifi/mac80211.sh use the new multi-bss single instance...
authorFelix Fietkau <nbd@openwrt.org>
Wed, 20 Jan 2010 02:26:05 +0000 (02:26 +0000)
committerFelix Fietkau <nbd@openwrt.org>
Wed, 20 Jan 2010 02:26:05 +0000 (02:26 +0000)
SVN-Revision: 19235

package/hostapd/files/hostapd.sh
package/mac80211/files/lib/wifi/mac80211.sh

index 740155725b16f198481e04579395dea506870039..9ee7657e2ca0cb4c3636616adeeea4d6e9329685 100644 (file)
@@ -1,7 +1,10 @@
-hostapd_setup_vif() {
-       local vif="$1"
-       local driver="$2"
-       local hostapd_cfg=
+hostapd_set_bss_options() {
+       local var="$1"
+       local vif="$2"
+       local enc wpa_group_rekey
+
+       config_get enc "$vif" encryption
+       config_get wpa_group_rekey "$vif" wpa_group_rekey
 
        # Examples:
        # psk-mixed/tkip        => WPA1+2 PSK, TKIP
@@ -14,7 +17,7 @@ hostapd_setup_vif() {
 
        # crypto defaults: WPA2 vs WPA1
        case "$enc" in
-               wpa2*|WPA2*|*PSK2*|*psk2*)
+               wpa2*|*psk2*)
                        wpa=2
                        crypto="CCMP"
                ;;
@@ -30,137 +33,82 @@ hostapd_setup_vif() {
 
        # explicit override for crypto setting
        case "$enc" in
-               *tkip+aes|*TKIP+AES|*tkip+ccmp|*TKIP+CCMP) crypto="CCMP TKIP";;
-               *tkip|*TKIP) crypto="TKIP";;
-               *aes|*AES|*ccmp|*CCMP) crypto="CCMP";;
+               *tkip+aes|*tkip+ccmp) crypto="CCMP TKIP";;
+               *aes|*ccmp) crypto="CCMP";;
+               *tkip) crypto="TKIP";;
        esac
 
        # use crypto/auth settings for building the hostapd config
        case "$enc" in
-               *psk*|*PSK*)
+               *psk*)
                        config_get psk "$vif" key
                        if [ ${#psk} -eq 64 ]; then
-                               append hostapd_cfg "wpa_psk=$psk" "$N"
+                               append "$var" "wpa_psk=$psk" "$N"
                        else
-                               append hostapd_cfg "wpa_passphrase=$psk" "$N"
+                               append "$var" "wpa_passphrase=$psk" "$N"
                        fi
                ;;
-               *wpa*|*WPA*)
+               *wpa*)
                        # required fields? formats?
                        # hostapd is particular, maybe a default configuration for failures
                        config_get server "$vif" server
-                       append hostapd_cfg "auth_server_addr=$server" "$N"
+                       append "$var" "auth_server_addr=$server" "$N"
                        config_get port "$vif" port
                        port=${port:-1812}
-                       append hostapd_cfg "auth_server_port=$port" "$N"
+                       append "$var" "auth_server_port=$port" "$N"
                        config_get secret "$vif" key
-                       append hostapd_cfg "auth_server_shared_secret=$secret" "$N"
+                       append "$var" "auth_server_shared_secret=$secret" "$N"
                        config_get nasid "$vif" nasid
-                       append hostapd_cfg "nas_identifier=$nasid" "$N"
-                       append hostapd_cfg "eapol_key_index_workaround=1" "$N"
-                       append hostapd_cfg "radius_acct_interim_interval=300" "$N"
-                       append hostapd_cfg "ieee8021x=1" "$N"
-                       append hostapd_cfg "auth_algs=1" "$N"
-                       append hostapd_cfg "wpa_key_mgmt=WPA-EAP" "$N"
-                       append hostapd_cfg "wpa_group_rekey=300" "$N"
-                       append hostapd_cfg "wpa_gmk_rekey=640" "$N"
+                       append "$var" "nas_identifier=$nasid" "$N"
+                       append "$var" "eapol_key_index_workaround=1" "$N"
+                       append "$var" "radius_acct_interim_interval=300" "$N"
+                       append "$var" "ieee8021x=1" "$N"
+                       append "$var" "auth_algs=1" "$N"
+                       append "$var" "wpa_key_mgmt=WPA-EAP" "$N"
+                       append "$var" "wpa_group_rekey=300" "$N"
+                       append "$var" "wpa_gmk_rekey=640" "$N"
                ;;
                *)
                        wpa=0
                        crypto=
                ;;
        esac
-       config_get ifname "$vif" ifname
-       config_get bridge "$vif" bridge
+       append "$var" "wpa=$wpa" "$N"
+       [ -n "$crypto" ] && append "$var" "wpa_pairwise=$crypto" "$N"
+       [ -n "$wpa_group_rekey" ] && append "$var" "wpa_group_rekey=$wpa_group_rekey" "$N"
+
        config_get ssid "$vif" ssid
+       config_get bridge "$vif" bridge
+       config_get ieee80211d "$vif" ieee80211d
+
+       append "$var" "ssid=$ssid" "$N"
+       [ -n "$bridge" ] && append "$var" "bridge=$bridge" "$N"
+       [ -n "$ieee80211d" ] && append "$var" "ieee80211d=$ieee80211d" "$N"
+}
+
+hostapd_setup_vif() {
+       local vif="$1"
+       local driver="$2"
+       hostapd_cfg=
+
+       hostapd_set_bss_options hostapd_cfg "$vif"
+       config_get ifname "$vif" ifname
        config_get device "$vif" device
        config_get channel "$device" channel
        config_get hwmode "$device" hwmode
-       config_get wpa_group_rekey "$vif" wpa_group_rekey
-       config_get ieee80211d "$vif" ieee80211d
-       config_get_bool hidden "$vif" hidden 0
-       config_get_bool wds "$vif" wds 0
-       [ "$wds" -gt 0 -a "$driver" = "nl80211" ] && wds="wds_sta=1" || wds=""
        case "$hwmode" in
                bg) hwmode=g;;
        esac
-       config_get country "$device" country
        [ "$channel" = auto ] && channel=
        [ -n "$channel" -a -z "$hwmode" ] && wifi_fixup_hwmode "$device"
-       [ -n "$hwmode" ] && {
-               config_get hwmode_11n "$device" hwmode_11n
-               [ -n "$hwmode_11n" ] && {
-                       hwmode="$hwmode_11n"
-                       config_get ht_capab "$device" ht_capab
-                       [ -n "$ht_capab" -a -n "${ht_capab%%\[*}" ] && {
-                               ht_capab=`echo "[$ht_capab]" | sed -e 's, ,][,g'`
-                       }
-               }
-       }
        cat > /var/run/hostapd-$ifname.conf <<EOF
 ctrl_interface=/var/run/hostapd-$ifname
 driver=$driver
 interface=$ifname
 ${hwmode:+hw_mode=$hwmode}
 ${channel:+channel=$channel}
-${bridge:+bridge=$bridge}
-ssid=$ssid
-wpa=$wpa
-${crypto:+wpa_pairwise=$crypto}
-${country:+country_code=$country}
-${hwmode_11n:+ieee80211n=1}
-${ht_capab:+ht_capab=$ht_capab}
-${wpa_group_rekey:+wpa_group_rekey=$wpa_group_rekey}
-${ieee80211d:+ieee80211d=$ieee80211d}
-$wds
 $hostapd_cfg
 EOF
-       case "$driver" in
-               madwifi)
-               ;;
-               *) 
-                       cat >> /var/run/hostapd-$ifname.conf <<EOF
-ignore_broadcast_ssid=$hidden
-wmm_enabled=1
-wmm_ac_bk_cwmin=4
-wmm_ac_bk_cwmax=10
-wmm_ac_bk_aifs=7
-wmm_ac_bk_txop_limit=0
-wmm_ac_bk_acm=0
-wmm_ac_be_aifs=3
-wmm_ac_be_cwmin=4
-wmm_ac_be_cwmax=10
-wmm_ac_be_txop_limit=0
-wmm_ac_be_acm=0
-wmm_ac_vi_aifs=2
-wmm_ac_vi_cwmin=3
-wmm_ac_vi_cwmax=4
-wmm_ac_vi_txop_limit=94
-wmm_ac_vi_acm=0
-wmm_ac_vo_aifs=2
-wmm_ac_vo_cwmin=2
-wmm_ac_vo_cwmax=3
-wmm_ac_vo_txop_limit=47
-wmm_ac_vo_acm=0
-tx_queue_data3_aifs=7
-tx_queue_data3_cwmin=15
-tx_queue_data3_cwmax=1023
-tx_queue_data3_burst=0
-tx_queue_data2_aifs=3
-tx_queue_data2_cwmin=15
-tx_queue_data2_cwmax=63
-tx_queue_data2_burst=0
-tx_queue_data1_aifs=1
-tx_queue_data1_cwmin=7
-tx_queue_data1_cwmax=15
-tx_queue_data1_burst=3.0
-tx_queue_data0_aifs=1
-tx_queue_data0_cwmin=3
-tx_queue_data0_cwmax=7
-tx_queue_data0_burst=1.5
-EOF
-               ;;
-       esac
        hostapd -P /var/run/wifi-$ifname.pid -B /var/run/hostapd-$ifname.conf
 }
 
index dea57223bc7a2a5471f7c63cfe224addfb664ed3..b3072b79b3051cc82400f4dfb135dc67347cc784 100644 (file)
@@ -1,8 +1,129 @@
 #!/bin/sh
 append DRIVERS "mac80211"
 
+mac80211_hostapd_setup_base() {
+       local phy="$1"
+       local ifname="$2"
+
+       cfgfile="/var/run/hostapd-$phy.conf"
+       config_get device "$vif" device
+       config_get country "$device" country
+       config_get hwmode "$device" hwmode
+       config_get channel "$device" channel
+       [ -n "$channel" -a -z "$hwmode" ] && wifi_fixup_hwmode "$device"
+       [ "$channel" = auto ] && channel=
+       [ -n "$hwmode" ] && {
+               config_get hwmode_11n "$device" hwmode_11n
+               [ -n "$hwmode_11n" ] && {
+                       hwmode="$hwmode_11n"
+                       append base_cfg "ieee80211n=1" "$N"
+                       config_get htmode "$device" htmode
+                       config_get ht_capab_list "$device" ht_capab
+                       case "$htmode" in
+                               HT20|HT40+|HT40-) ht_capab="[$htmode]";;
+                               *)ht_capab=;;
+                       esac
+                       for cap in $ht_capab_list; do
+                               ht_capab="$ht_capab[$cap]"
+                       done
+                       [ -n "$ht_capab" ] && append base_cfg "ht_capab=$ht_capab" "$N"
+               }
+       }
+       cat > "$cfgfile" <<EOF
+ctrl_interface=/var/run/hostapd-$phy
+driver=nl80211
+wmm_enabled=1
+wmm_ac_bk_cwmin=4
+wmm_ac_bk_cwmax=10
+wmm_ac_bk_aifs=7
+wmm_ac_bk_txop_limit=0
+wmm_ac_bk_acm=0
+wmm_ac_be_aifs=3
+wmm_ac_be_cwmin=4
+wmm_ac_be_cwmax=10
+wmm_ac_be_txop_limit=0
+wmm_ac_be_acm=0
+wmm_ac_vi_aifs=2
+wmm_ac_vi_cwmin=3
+wmm_ac_vi_cwmax=4
+wmm_ac_vi_txop_limit=94
+wmm_ac_vi_acm=0
+wmm_ac_vo_aifs=2
+wmm_ac_vo_cwmin=2
+wmm_ac_vo_cwmax=3
+wmm_ac_vo_txop_limit=47
+wmm_ac_vo_acm=0
+tx_queue_data3_aifs=7
+tx_queue_data3_cwmin=15
+tx_queue_data3_cwmax=1023
+tx_queue_data3_burst=0
+tx_queue_data2_aifs=3
+tx_queue_data2_cwmin=15
+tx_queue_data2_cwmax=63
+tx_queue_data2_burst=0
+tx_queue_data1_aifs=1
+tx_queue_data1_cwmin=7
+tx_queue_data1_cwmax=15
+tx_queue_data1_burst=3.0
+tx_queue_data0_aifs=1
+tx_queue_data0_cwmin=3
+tx_queue_data0_cwmax=7
+tx_queue_data0_burst=1.5
+${hwmode:+hw_mode=$hwmode}
+${channel:+channel=$channel}
+${country:+country_code=$country}
+$base_cfg
+
+EOF
+}
+
+mac80211_hostapd_setup_bss() {
+       local phy="$1"
+       local vif="$2"
+
+       hostapd_cfg=
+       cfgfile="/var/run/hostapd-$phy.conf"
+       config_get ifname "$vif" ifname
+
+       if [ -f "$cfgfile" ]; then
+               append hostapd_cfg "bss=$ifname" "$N"
+       else
+               mac80211_hostapd_setup_base "$phy" "$ifname"
+               append hostapd_cfg "interface=$ifname" "$N"
+       fi
+
+       local net_cfg bridge
+       net_cfg="$(find_net_config "$vif")"
+       [ -z "$net_cfg" ] || bridge="$(bridge_interface "$net_cfg")"
+       config_set "$vif" bridge "$bridge"
+
+       hostapd_set_bss_options hostapd_cfg "$vif"
+
+       config_get_bool wds "$vif" wds 0
+       [ "$wds" -gt 0 ] && append hostapd_cfg "wds_sta=1" "$N"
+
+       config_get macaddr "$vif" macaddr
+       config_get_bool hidden "$vif" hidden 0
+       cat >> /var/run/hostapd-$phy.conf <<EOF
+$hostapd_cfg
+bssid=$macaddr
+ignore_broadcast_ssid=$hidden
+EOF
+}
+
+mac80211_start_vif() {
+       local vif="$1"
+       local ifname="$2"
+
+       local net_cfg
+       net_cfg="$(find_net_config "$vif")"
+       [ -z "$net_cfg" ] || start_net "$ifname" "$net_cfg"
+
+       set_wifi_up "$vif" "$ifname"
+}
+
 find_mac80211_phy() {
-       config_get device "$1"
+       local device="$1"
 
        local macaddr="$(config_get "$device" macaddr | tr 'A-Z' 'a-z')"
        config_get phy "$device" phy
@@ -53,7 +174,7 @@ disable_mac80211() (
        # kill all running hostapd and wpa_supplicant processes that
        # are running on atheros/mac80211 vifs
        for pid in `pidof hostapd wpa_supplicant`; do
-               grep wlan /proc/$pid/cmdline >/dev/null && \
+               grep "$phy" /proc/$pid/cmdline >/dev/null && \
                        kill $pid
        done
 
@@ -82,6 +203,7 @@ enable_mac80211() {
        config_get phy "$device" phy
        local i=0
        local macidx=0
+       local apidx=0
        fixed=""
 
        [ -n "$country" ] && iw reg set "$country"
@@ -110,7 +232,6 @@ enable_mac80211() {
                config_get enc "$vif" encryption
                config_get mode "$vif" mode
                config_get ssid "$vif" ssid
-               config_get_bool wds "$vif" wds 0
 
                # It is far easier to delete and create the desired interface
                case "$mode" in
@@ -120,7 +241,8 @@ enable_mac80211() {
                        ap)
                                # Hostapd will handle recreating the interface and
                                # it's accompanying monitor
-                               iw phy "$phy" interface add "$ifname" type managed
+                               apidx="$(($apidx + 1))"
+                               [ "$apidx" -gt 1 ] || iw phy "$phy" interface add "$ifname" type managed
                        ;;
                        mesh)
                                config_get mesh_id "$vif" mesh_id
@@ -131,6 +253,7 @@ enable_mac80211() {
                        ;;
                        sta)
                                local wdsflag
+                               config_get_bool wds "$vif" wds 0
                                [ "$wds" -gt 0 ] && wdsflag="4addr on"
                                iw phy "$phy" interface add "$ifname" type managed $wdsflag
                                config_get_bool powersave "$vif" powersave 0
@@ -156,13 +279,8 @@ enable_mac80211() {
                        vif_mac="$( printf %02x $((0x$mac_1 + $offset)) ):$mac_2"
                        macidx="$(($macidx + 1))"
                }
-               ifconfig "$ifname" hw ether "$vif_mac"
-
-               # We attempt to set teh channel for all interfaces, although
-               # mac80211 may not support it or the driver might not yet
-               [ -n "$fixed" -a -n "$channel" ] && iw dev "$ifname" set channel "$channel"
-
-               local key keystring
+               [ "$mode" = "ap" ] || ifconfig "$ifname" hw ether "$vif_mac"
+               config_set "$vif" macaddr "$vif_mac"
 
                # Valid values are:
                # wpa / wep / none
@@ -180,6 +298,13 @@ enable_mac80211() {
                # wep + keymgmt = 'NONE' -> wpa_supplicant will be
                # configured to handle the wep connection
                if [ ! "$mode" = "ap" ]; then
+                       # We attempt to set the channel for all interfaces, although
+                       # mac80211 may not support it or the driver might not yet
+                       # for ap mode this is handled by hostapd
+                       [ -n "$fixed" -a -n "$channel" ] && iw dev "$ifname" set channel "$channel"
+
+                       local key keystring
+
                        case "$enc" in
                                *wep*)
                                        config_get keymgmt "$vif" keymgmt
@@ -229,26 +354,9 @@ enable_mac80211() {
 
                ifconfig "$ifname" up
 
-               local net_cfg bridge
-               net_cfg="$(find_net_config "$vif")"
-               [ -z "$net_cfg" ] || {
-                       bridge="$(bridge_interface "$net_cfg")"
-                       config_set "$vif" bridge "$bridge"
-                       start_net "$ifname" "$net_cfg"
-               }
+               [ "$mode" = "ap" ] || mac80211_start_vif "$vif" "$ifname"
 
-               set_wifi_up "$vif" "$ifname"
                case "$mode" in
-                       ap)
-                               if eval "type hostapd_setup_vif" 2>/dev/null >/dev/null; then
-                                       hostapd_setup_vif "$vif" nl80211 || {
-                                               echo "enable_mac80211($device): Failed to set up wpa for interface $ifname" >&2
-                                               # make sure this wifi interface won't accidentally stay open without encryption
-                                               ifconfig "$ifname" down
-                                               continue
-                                       }
-                               fi
-                       ;;
                        adhoc)
                                config_get bssid "$vif" bssid
                                iw dev "$ifname" ibss join "$ssid" $freq ${fixed:+fixed-freq} $bssid
@@ -290,6 +398,30 @@ enable_mac80211() {
                        ;;
                esac
        done
+
+       local start_hostapd=
+       rm -f /var/run/hostapd-$phy.conf
+       for vif in $vifs; do
+               config_get mode "$vif" mode
+               [ "$mode" = "ap" ] || continue
+               mac80211_hostapd_setup_bss "$phy" "$vif"
+               start_hostapd=1
+       done
+
+       [ -n "$start_hostapd" ] || return
+
+       hostapd -P /var/run/wifi-$phy.pid -B /var/run/hostapd-$phy.conf || {
+               echo "Failed to start hostapd for $phy"
+               return
+       }
+       sleep 2
+
+       for vif in $vifs; do
+               config_get mode "$vif" mode
+               config_get ifname "$vif" ifname
+               [ "$mode" = "ap" ] || continue
+               mac80211_start_vif "$vif" "$ifname"
+       done
 }
 
 
@@ -325,9 +457,10 @@ detect_mac80211() {
                ht_capab="";
                [ "$ht_cap" -gt 0 ] && {
                        mode_11n="n"
+                       append ht_capab "       option htmode   HT20" "$N"
+
                        list="  list ht_capab"
                        [ "$(($ht_cap & 1))" -eq 1 ] && append ht_capab "$list  LDPC" "$N"
-                       [ "$(($ht_cap & 2))" -eq 2 ] && append ht_capab "$list  HT40-" "$N"
                        [ "$(($ht_cap & 32))" -eq 32 ] && append ht_capab "$list        SHORT-GI-20" "$N"
                        [ "$(($ht_cap & 64))" -eq 64 ] && append ht_capab "$list        SHORT-GI-40" "$N"
                        [ "$(($ht_cap & 4096))" -eq 4096 ] && append ht_capab "$list    DSSS_CCK-40" "$N"
@@ -340,9 +473,9 @@ config wifi-device  radio$devidx
        option channel  ${channel}
        option macaddr  $(cat /sys/class/ieee80211/${dev}/macaddress)
        option hwmode   11${mode_11n}${mode_band}
+$ht_capab
        # REMOVE THIS LINE TO ENABLE WIFI:
        option disabled 1
-$ht_capab
 
 config wifi-iface
        option device   radio$devidx