ipq40xx: fix gpio-hog related boot issues
authorSven Eckelmann <sven.eckelmann@openmesh.com>
Mon, 16 Apr 2018 11:51:15 +0000 (13:51 +0200)
committerMathias Kresin <dev@kresin.me>
Mon, 23 Apr 2018 20:07:22 +0000 (22:07 +0200)
The pinctrl initialization fails with the MSM pinctrl code and gpio-hogs
because either the gpio ranges are not yet initialized (missing gpio-range
in DT) or that the msm driver unconditionally tries to re-initializes the
ranges (gpio-range in DT).

To allow gpio-hogs and similar early-boot gpio code, the gpio-ranges must
be in the device tree and the pinctrl-msm code must check whether the range
was already initialized by the DT.

Signed-off-by: Sven Eckelmann <sven.eckelmann@openmesh.com>
[drop changes to unrelated dtsi files, refresh patches]
Signed-off-by: Mathias Kresin <dev@kresin.me>
target/linux/ipq40xx/patches-4.14/105-pinctrl-msm-fix-gpio-hog-related-boot-issues.patch [new file with mode: 0644]
target/linux/ipq40xx/patches-4.14/305-qcom-ipq4019-use-v2-of-the-kpss-bringup-mechanism.patch
target/linux/ipq40xx/patches-4.14/306-qcom-ipq4019-add-USB-nodes-to-ipq4019-SoC-device-tre.patch
target/linux/ipq40xx/patches-4.14/701-dts-ipq4019-add-mdio-node.patch
target/linux/ipq40xx/patches-4.14/702-dts-ipq4019-add-PHY-switch-nodes.patch
target/linux/ipq40xx/patches-4.14/711-dts-ipq4019-add-ethernet-essedma-node.patch

diff --git a/target/linux/ipq40xx/patches-4.14/105-pinctrl-msm-fix-gpio-hog-related-boot-issues.patch b/target/linux/ipq40xx/patches-4.14/105-pinctrl-msm-fix-gpio-hog-related-boot-issues.patch
new file mode 100644 (file)
index 0000000..57ed940
--- /dev/null
@@ -0,0 +1,103 @@
+From: Christian Lamparter <chunkeey@gmail.com>
+Date: Thu, 12 Apr 2018 21:01:38 +0200
+Subject: [PATCH] pinctrl: msm: fix gpio-hog related boot issues
+
+Sven Eckelmann reported an issue with the current IPQ4019 pinctrl.
+Setting up any gpio-hog in the device-tree for his device would
+"kill the bootup completely":
+
+| [    0.477838] msm_serial 78af000.serial: could not find pctldev for node /soc/pinctrl@1000000/serial_pinmux, deferring probe
+| [    0.499828] spi_qup 78b5000.spi: could not find pctldev for node /soc/pinctrl@1000000/spi_0_pinmux, deferring probe
+| [    1.298883] requesting hog GPIO enable USB2 power (chip 1000000.pinctrl, offset 58) failed, -517
+| [    1.299609] gpiochip_add_data: GPIOs 0..99 (1000000.pinctrl) failed to register
+| [    1.308589] ipq4019-pinctrl 1000000.pinctrl: Failed register gpiochip
+| [    1.316586] msm_serial 78af000.serial: could not find pctldev for node /soc/pinctrl@1000000/serial_pinmux, deferring probe
+| [    1.322415] spi_qup 78b5000.spi: could not find pctldev for node /soc/pinctrl@1000000/spi_0_pinmux, deferri
+
+This was also verified on a RT-AC58U (IPQ4018) which would
+no longer boot, if a gpio-hog was specified. (Tried forcing
+the USB LED PIN (GPIO0) to high.).
+
+The problem is that Pinctrl+GPIO registration is currently
+peformed in the following order in pinctrl-msm.c:
+       1. pinctrl_register()
+       2. gpiochip_add()
+       3. gpiochip_add_pin_range()
+
+The actual error code -517 == -EPROBE_DEFER is coming from
+pinctrl_get_device_gpio_range(), which is called through:
+        gpiochip_add
+            of_gpiochip_add
+                of_gpiochip_scan_gpios
+                    gpiod_hog
+                        gpiochip_request_own_desc
+                            __gpiod_request
+                                chip->request
+                                    gpiochip_generic_request
+                                       pinctrl_gpio_request
+                                          pinctrl_get_device_gpio_range
+
+pinctrl_get_device_gpio_range() is unable to find any valid
+pin ranges, since nothing has been added to the pinctrldev_list yet.
+so the range can't be found, and the operation fails with -EPROBE_DEFER.
+
+This patch fixes the issue by adding the "gpio-ranges" property to
+the pinctrl device node of all upstream Qcom SoC. The pin ranges are
+then added by the gpio core.
+
+In order to remain compatible with older, existing DTs (and ACPI)
+a check for the "gpio-ranges" property has been added to
+msm_gpio_init(). This prevents the driver of adding the same entry
+to the pinctrldev_list twice.
+
+Reported-by: Sven Eckelmann <sven.eckelmann@openmesh.com>
+Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
+
+Origin: other, https://patchwork.kernel.org/patch/10339127/
+---
+ arch/arm/boot/dts/qcom-ipq4019.dtsi   |  1 +
+ drivers/pinctrl/qcom/pinctrl-msm.c    | 23 ++++++++++++++++++-----
+ 14 files changed, 32 insertions(+), 6 deletions(-)
+
+--- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
++++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
+@@ -166,6 +166,7 @@
+                       compatible = "qcom,ipq4019-pinctrl";
+                       reg = <0x01000000 0x300000>;
+                       gpio-controller;
++                      gpio-ranges = <&tlmm 0 0 100>;
+                       #gpio-cells = <2>;
+                       interrupt-controller;
+                       #interrupt-cells = <2>;
+--- a/drivers/pinctrl/qcom/pinctrl-msm.c
++++ b/drivers/pinctrl/qcom/pinctrl-msm.c
+@@ -831,11 +831,24 @@ static int msm_gpio_init(struct msm_pinc
+               return ret;
+       }
+-      ret = gpiochip_add_pin_range(&pctrl->chip, dev_name(pctrl->dev), 0, 0, chip->ngpio);
+-      if (ret) {
+-              dev_err(pctrl->dev, "Failed to add pin range\n");
+-              gpiochip_remove(&pctrl->chip);
+-              return ret;
++      /*
++       * For DeviceTree-supported systems, the gpio core checks the
++       * pinctrl's device node for the "gpio-ranges" property.
++       * If it is present, it takes care of adding the pin ranges
++       * for the driver. In this case the driver can skip ahead.
++       *
++       * In order to remain compatible with older, existing DeviceTree
++       * files which don't set the "gpio-ranges" property or systems that
++       * utilize ACPI the driver has to call gpiochip_add_pin_range().
++       */
++      if (!of_property_read_bool(pctrl->dev->of_node, "gpio-ranges")) {
++              ret = gpiochip_add_pin_range(&pctrl->chip,
++                      dev_name(pctrl->dev), 0, 0, chip->ngpio);
++              if (ret) {
++                      dev_err(pctrl->dev, "Failed to add pin range\n");
++                      gpiochip_remove(&pctrl->chip);
++                      return ret;
++              }
+       }
+       ret = gpiochip_irqchip_add(chip,
index 1d08b9de74536f749ca6ea213882a861443b2b46..ed44359e5fa1906ac972f99f04377a00a2e2b9e5 100644 (file)
@@ -67,7 +67,7 @@ Changes:
                        qcom,acc = <&acc3>;
                        qcom,saw = <&saw3>;
                        reg = <0x3>;
-@@ -264,22 +274,22 @@
+@@ -265,22 +275,22 @@
                };
  
                  acc0: clock-controller@b088000 {
@@ -94,7 +94,7 @@ Changes:
                          reg = <0x0b0b8000 0x1000>, <0xb008000 0x1000>;
                  };
  
-@@ -307,6 +317,12 @@
+@@ -308,6 +318,12 @@
                          regulator;
                  };
  
index cd0f14eafd99c1e50047e72e3d4c236535f004a0..33d744251cd207e13ed4bbcaf9e8e1b0c9f0c98c 100644 (file)
@@ -51,7 +51,7 @@ Changes:
  };
 --- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
 +++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
-@@ -538,5 +538,76 @@
+@@ -539,5 +539,76 @@
                                          "legacy";
                        status = "disabled";
                };
index 112c921dbd54b0abd055e3d06a2f0abdada4d4da..25f596eaffd7ec4cc9474d677dd8407035bb3a23 100644 (file)
@@ -15,7 +15,7 @@ so the info might change.
 
 --- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
 +++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
-@@ -539,6 +539,34 @@
+@@ -540,6 +540,34 @@
                        status = "disabled";
                };
  
index 7ad9edbe99a39d8e00a18d3b5626f327e4f4865b..eb3d9be01302b98d4b217dad9ec86e57ec73f57e 100644 (file)
@@ -14,7 +14,7 @@ Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
 
 --- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
 +++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
-@@ -567,6 +567,29 @@
+@@ -568,6 +568,29 @@
                        };
                };
  
index 285cafd6d50b51571fcec9d7e249e016aaafa63d..2c923625b472d2c6b839d4f760e480e603c1a51c 100644 (file)
@@ -25,7 +25,7 @@ Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
        };
  
        cpus {
-@@ -590,6 +592,64 @@
+@@ -591,6 +593,64 @@
                        status = "disabled";
                };