kernel: add at803x fix for sgmii mode
authorFelix Fietkau <nbd@openwrt.org>
Sun, 3 Jan 2016 23:13:16 +0000 (23:13 +0000)
committerFelix Fietkau <nbd@openwrt.org>
Sun, 3 Jan 2016 23:13:16 +0000 (23:13 +0000)
Some (possibly broken) bootloaders incorreclty initialize at8033
phy. This patch enables sgmii autonegotiation mode.

Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 48109

target/linux/generic/patches-3.18/735-net-phy-at803x-fix-at8033-sgmii-mode.patch [new file with mode: 0644]
target/linux/generic/patches-4.1/735-net-phy-at803x-fix-at8033-sgmii-mode.patch [new file with mode: 0644]
target/linux/generic/patches-4.3/735-net-phy-at803x-fix-at8033-sgmii-mode.patch [new file with mode: 0644]
target/linux/generic/patches-4.4/735-net-phy-at803x-fix-at8033-sgmii-mode.patch [new file with mode: 0644]

diff --git a/target/linux/generic/patches-3.18/735-net-phy-at803x-fix-at8033-sgmii-mode.patch b/target/linux/generic/patches-3.18/735-net-phy-at803x-fix-at8033-sgmii-mode.patch
new file mode 100644 (file)
index 0000000..117f15d
--- /dev/null
@@ -0,0 +1,96 @@
+--- a/drivers/net/phy/at803x.c
++++ b/drivers/net/phy/at803x.c
+@@ -36,6 +36,9 @@
+ #define AT803X_INER                           0x0012
+ #define AT803X_INER_INIT                      0xec00
+ #define AT803X_INSR                           0x0013
++#define AT803X_REG_CHIP_CONFIG                        0x1f
++#define AT803X_BT_BX_REG_SEL                  0x8000
++#define AT803X_SGMII_ANEG_EN                  0x1000
+ #define AT803X_PCS_SMART_EEE_CTRL3                    0x805D
+ #define AT803X_SMART_EEE_CTRL3_LPI_TX_DELAY_SEL_MASK  0x3
+@@ -49,9 +52,10 @@
+ #define AT803X_DEBUG_SYSTEM_MODE_CTRL         0x05
+ #define AT803X_DEBUG_RGMII_TX_CLK_DLY         BIT(8)
+-#define ATH8030_PHY_ID 0x004dd076
+-#define ATH8031_PHY_ID 0x004dd074
+-#define ATH8035_PHY_ID 0x004dd072
++#define AT803X_PHY_ID_MASK                    0xffffffef
++#define ATH8030_PHY_ID                                0x004dd076
++#define ATH8031_PHY_ID                                0x004dd074
++#define ATH8035_PHY_ID                                0x004dd072
+ MODULE_DESCRIPTION("Atheros 803x PHY driver");
+ MODULE_AUTHOR("Matus Ujhelyi");
+@@ -268,6 +272,27 @@ static int at803x_config_init(struct phy
+ {
+       struct at803x_platform_data *pdata;
+       int ret;
++      u32 v;
++
++      if (phydev->drv->phy_id == ATH8031_PHY_ID &&
++              phydev->interface == PHY_INTERFACE_MODE_SGMII)
++      {
++              v = phy_read(phydev, AT803X_REG_CHIP_CONFIG);
++              /* select SGMII/fiber page */
++              ret = phy_write(phydev, AT803X_REG_CHIP_CONFIG,
++                                              v & ~AT803X_BT_BX_REG_SEL);
++              if (ret)
++                      return ret;
++              /* enable SGMII autonegotiation */
++              ret = phy_write(phydev, MII_BMCR, AT803X_SGMII_ANEG_EN);
++              if (ret)
++                      return ret;
++              /* select copper page */
++              ret = phy_write(phydev, AT803X_REG_CHIP_CONFIG,
++                                              v | AT803X_BT_BX_REG_SEL);
++              if (ret)
++                      return ret;
++      }
+       ret = genphy_config_init(phydev);
+       if (ret < 0)
+@@ -394,7 +419,7 @@ static struct phy_driver at803x_driver[]
+       /* ATHEROS 8035 */
+       .phy_id                 = ATH8035_PHY_ID,
+       .name                   = "Atheros 8035 ethernet",
+-      .phy_id_mask            = 0xffffffef,
++      .phy_id_mask            = AT803X_PHY_ID_MASK,
+       .probe                  = at803x_probe,
+       .config_init            = at803x_config_init,
+       .link_change_notify     = at803x_link_change_notify,
+@@ -413,7 +438,7 @@ static struct phy_driver at803x_driver[]
+       /* ATHEROS 8030 */
+       .phy_id                 = ATH8030_PHY_ID,
+       .name                   = "Atheros 8030 ethernet",
+-      .phy_id_mask            = 0xffffffef,
++      .phy_id_mask            = AT803X_PHY_ID_MASK,
+       .probe                  = at803x_probe,
+       .config_init            = at803x_config_init,
+       .link_change_notify     = at803x_link_change_notify,
+@@ -431,8 +456,8 @@ static struct phy_driver at803x_driver[]
+ }, {
+       /* ATHEROS 8031 */
+       .phy_id                 = ATH8031_PHY_ID,
+-      .name                   = "Atheros 8031 ethernet",
+-      .phy_id_mask            = 0xffffffef,
++      .name                   = "Atheros 8031/8033 ethernet",
++      .phy_id_mask            = AT803X_PHY_ID_MASK,
+       .probe                  = at803x_probe,
+       .config_init            = at803x_config_init,
+       .link_change_notify     = at803x_link_change_notify,
+@@ -454,9 +479,9 @@ static struct phy_driver at803x_driver[]
+ module_phy_driver(at803x_driver);
+ static struct mdio_device_id __maybe_unused atheros_tbl[] = {
+-      { ATH8030_PHY_ID, 0xffffffef },
+-      { ATH8031_PHY_ID, 0xffffffef },
+-      { ATH8035_PHY_ID, 0xffffffef },
++      { ATH8030_PHY_ID, AT803X_PHY_ID_MASK },
++      { ATH8031_PHY_ID, AT803X_PHY_ID_MASK },
++      { ATH8035_PHY_ID, AT803X_PHY_ID_MASK },
+       { }
+ };
diff --git a/target/linux/generic/patches-4.1/735-net-phy-at803x-fix-at8033-sgmii-mode.patch b/target/linux/generic/patches-4.1/735-net-phy-at803x-fix-at8033-sgmii-mode.patch
new file mode 100644 (file)
index 0000000..117f15d
--- /dev/null
@@ -0,0 +1,96 @@
+--- a/drivers/net/phy/at803x.c
++++ b/drivers/net/phy/at803x.c
+@@ -36,6 +36,9 @@
+ #define AT803X_INER                           0x0012
+ #define AT803X_INER_INIT                      0xec00
+ #define AT803X_INSR                           0x0013
++#define AT803X_REG_CHIP_CONFIG                        0x1f
++#define AT803X_BT_BX_REG_SEL                  0x8000
++#define AT803X_SGMII_ANEG_EN                  0x1000
+ #define AT803X_PCS_SMART_EEE_CTRL3                    0x805D
+ #define AT803X_SMART_EEE_CTRL3_LPI_TX_DELAY_SEL_MASK  0x3
+@@ -49,9 +52,10 @@
+ #define AT803X_DEBUG_SYSTEM_MODE_CTRL         0x05
+ #define AT803X_DEBUG_RGMII_TX_CLK_DLY         BIT(8)
+-#define ATH8030_PHY_ID 0x004dd076
+-#define ATH8031_PHY_ID 0x004dd074
+-#define ATH8035_PHY_ID 0x004dd072
++#define AT803X_PHY_ID_MASK                    0xffffffef
++#define ATH8030_PHY_ID                                0x004dd076
++#define ATH8031_PHY_ID                                0x004dd074
++#define ATH8035_PHY_ID                                0x004dd072
+ MODULE_DESCRIPTION("Atheros 803x PHY driver");
+ MODULE_AUTHOR("Matus Ujhelyi");
+@@ -268,6 +272,27 @@ static int at803x_config_init(struct phy
+ {
+       struct at803x_platform_data *pdata;
+       int ret;
++      u32 v;
++
++      if (phydev->drv->phy_id == ATH8031_PHY_ID &&
++              phydev->interface == PHY_INTERFACE_MODE_SGMII)
++      {
++              v = phy_read(phydev, AT803X_REG_CHIP_CONFIG);
++              /* select SGMII/fiber page */
++              ret = phy_write(phydev, AT803X_REG_CHIP_CONFIG,
++                                              v & ~AT803X_BT_BX_REG_SEL);
++              if (ret)
++                      return ret;
++              /* enable SGMII autonegotiation */
++              ret = phy_write(phydev, MII_BMCR, AT803X_SGMII_ANEG_EN);
++              if (ret)
++                      return ret;
++              /* select copper page */
++              ret = phy_write(phydev, AT803X_REG_CHIP_CONFIG,
++                                              v | AT803X_BT_BX_REG_SEL);
++              if (ret)
++                      return ret;
++      }
+       ret = genphy_config_init(phydev);
+       if (ret < 0)
+@@ -394,7 +419,7 @@ static struct phy_driver at803x_driver[]
+       /* ATHEROS 8035 */
+       .phy_id                 = ATH8035_PHY_ID,
+       .name                   = "Atheros 8035 ethernet",
+-      .phy_id_mask            = 0xffffffef,
++      .phy_id_mask            = AT803X_PHY_ID_MASK,
+       .probe                  = at803x_probe,
+       .config_init            = at803x_config_init,
+       .link_change_notify     = at803x_link_change_notify,
+@@ -413,7 +438,7 @@ static struct phy_driver at803x_driver[]
+       /* ATHEROS 8030 */
+       .phy_id                 = ATH8030_PHY_ID,
+       .name                   = "Atheros 8030 ethernet",
+-      .phy_id_mask            = 0xffffffef,
++      .phy_id_mask            = AT803X_PHY_ID_MASK,
+       .probe                  = at803x_probe,
+       .config_init            = at803x_config_init,
+       .link_change_notify     = at803x_link_change_notify,
+@@ -431,8 +456,8 @@ static struct phy_driver at803x_driver[]
+ }, {
+       /* ATHEROS 8031 */
+       .phy_id                 = ATH8031_PHY_ID,
+-      .name                   = "Atheros 8031 ethernet",
+-      .phy_id_mask            = 0xffffffef,
++      .name                   = "Atheros 8031/8033 ethernet",
++      .phy_id_mask            = AT803X_PHY_ID_MASK,
+       .probe                  = at803x_probe,
+       .config_init            = at803x_config_init,
+       .link_change_notify     = at803x_link_change_notify,
+@@ -454,9 +479,9 @@ static struct phy_driver at803x_driver[]
+ module_phy_driver(at803x_driver);
+ static struct mdio_device_id __maybe_unused atheros_tbl[] = {
+-      { ATH8030_PHY_ID, 0xffffffef },
+-      { ATH8031_PHY_ID, 0xffffffef },
+-      { ATH8035_PHY_ID, 0xffffffef },
++      { ATH8030_PHY_ID, AT803X_PHY_ID_MASK },
++      { ATH8031_PHY_ID, AT803X_PHY_ID_MASK },
++      { ATH8035_PHY_ID, AT803X_PHY_ID_MASK },
+       { }
+ };
diff --git a/target/linux/generic/patches-4.3/735-net-phy-at803x-fix-at8033-sgmii-mode.patch b/target/linux/generic/patches-4.3/735-net-phy-at803x-fix-at8033-sgmii-mode.patch
new file mode 100644 (file)
index 0000000..117f15d
--- /dev/null
@@ -0,0 +1,96 @@
+--- a/drivers/net/phy/at803x.c
++++ b/drivers/net/phy/at803x.c
+@@ -36,6 +36,9 @@
+ #define AT803X_INER                           0x0012
+ #define AT803X_INER_INIT                      0xec00
+ #define AT803X_INSR                           0x0013
++#define AT803X_REG_CHIP_CONFIG                        0x1f
++#define AT803X_BT_BX_REG_SEL                  0x8000
++#define AT803X_SGMII_ANEG_EN                  0x1000
+ #define AT803X_PCS_SMART_EEE_CTRL3                    0x805D
+ #define AT803X_SMART_EEE_CTRL3_LPI_TX_DELAY_SEL_MASK  0x3
+@@ -49,9 +52,10 @@
+ #define AT803X_DEBUG_SYSTEM_MODE_CTRL         0x05
+ #define AT803X_DEBUG_RGMII_TX_CLK_DLY         BIT(8)
+-#define ATH8030_PHY_ID 0x004dd076
+-#define ATH8031_PHY_ID 0x004dd074
+-#define ATH8035_PHY_ID 0x004dd072
++#define AT803X_PHY_ID_MASK                    0xffffffef
++#define ATH8030_PHY_ID                                0x004dd076
++#define ATH8031_PHY_ID                                0x004dd074
++#define ATH8035_PHY_ID                                0x004dd072
+ MODULE_DESCRIPTION("Atheros 803x PHY driver");
+ MODULE_AUTHOR("Matus Ujhelyi");
+@@ -268,6 +272,27 @@ static int at803x_config_init(struct phy
+ {
+       struct at803x_platform_data *pdata;
+       int ret;
++      u32 v;
++
++      if (phydev->drv->phy_id == ATH8031_PHY_ID &&
++              phydev->interface == PHY_INTERFACE_MODE_SGMII)
++      {
++              v = phy_read(phydev, AT803X_REG_CHIP_CONFIG);
++              /* select SGMII/fiber page */
++              ret = phy_write(phydev, AT803X_REG_CHIP_CONFIG,
++                                              v & ~AT803X_BT_BX_REG_SEL);
++              if (ret)
++                      return ret;
++              /* enable SGMII autonegotiation */
++              ret = phy_write(phydev, MII_BMCR, AT803X_SGMII_ANEG_EN);
++              if (ret)
++                      return ret;
++              /* select copper page */
++              ret = phy_write(phydev, AT803X_REG_CHIP_CONFIG,
++                                              v | AT803X_BT_BX_REG_SEL);
++              if (ret)
++                      return ret;
++      }
+       ret = genphy_config_init(phydev);
+       if (ret < 0)
+@@ -394,7 +419,7 @@ static struct phy_driver at803x_driver[]
+       /* ATHEROS 8035 */
+       .phy_id                 = ATH8035_PHY_ID,
+       .name                   = "Atheros 8035 ethernet",
+-      .phy_id_mask            = 0xffffffef,
++      .phy_id_mask            = AT803X_PHY_ID_MASK,
+       .probe                  = at803x_probe,
+       .config_init            = at803x_config_init,
+       .link_change_notify     = at803x_link_change_notify,
+@@ -413,7 +438,7 @@ static struct phy_driver at803x_driver[]
+       /* ATHEROS 8030 */
+       .phy_id                 = ATH8030_PHY_ID,
+       .name                   = "Atheros 8030 ethernet",
+-      .phy_id_mask            = 0xffffffef,
++      .phy_id_mask            = AT803X_PHY_ID_MASK,
+       .probe                  = at803x_probe,
+       .config_init            = at803x_config_init,
+       .link_change_notify     = at803x_link_change_notify,
+@@ -431,8 +456,8 @@ static struct phy_driver at803x_driver[]
+ }, {
+       /* ATHEROS 8031 */
+       .phy_id                 = ATH8031_PHY_ID,
+-      .name                   = "Atheros 8031 ethernet",
+-      .phy_id_mask            = 0xffffffef,
++      .name                   = "Atheros 8031/8033 ethernet",
++      .phy_id_mask            = AT803X_PHY_ID_MASK,
+       .probe                  = at803x_probe,
+       .config_init            = at803x_config_init,
+       .link_change_notify     = at803x_link_change_notify,
+@@ -454,9 +479,9 @@ static struct phy_driver at803x_driver[]
+ module_phy_driver(at803x_driver);
+ static struct mdio_device_id __maybe_unused atheros_tbl[] = {
+-      { ATH8030_PHY_ID, 0xffffffef },
+-      { ATH8031_PHY_ID, 0xffffffef },
+-      { ATH8035_PHY_ID, 0xffffffef },
++      { ATH8030_PHY_ID, AT803X_PHY_ID_MASK },
++      { ATH8031_PHY_ID, AT803X_PHY_ID_MASK },
++      { ATH8035_PHY_ID, AT803X_PHY_ID_MASK },
+       { }
+ };
diff --git a/target/linux/generic/patches-4.4/735-net-phy-at803x-fix-at8033-sgmii-mode.patch b/target/linux/generic/patches-4.4/735-net-phy-at803x-fix-at8033-sgmii-mode.patch
new file mode 100644 (file)
index 0000000..117f15d
--- /dev/null
@@ -0,0 +1,96 @@
+--- a/drivers/net/phy/at803x.c
++++ b/drivers/net/phy/at803x.c
+@@ -36,6 +36,9 @@
+ #define AT803X_INER                           0x0012
+ #define AT803X_INER_INIT                      0xec00
+ #define AT803X_INSR                           0x0013
++#define AT803X_REG_CHIP_CONFIG                        0x1f
++#define AT803X_BT_BX_REG_SEL                  0x8000
++#define AT803X_SGMII_ANEG_EN                  0x1000
+ #define AT803X_PCS_SMART_EEE_CTRL3                    0x805D
+ #define AT803X_SMART_EEE_CTRL3_LPI_TX_DELAY_SEL_MASK  0x3
+@@ -49,9 +52,10 @@
+ #define AT803X_DEBUG_SYSTEM_MODE_CTRL         0x05
+ #define AT803X_DEBUG_RGMII_TX_CLK_DLY         BIT(8)
+-#define ATH8030_PHY_ID 0x004dd076
+-#define ATH8031_PHY_ID 0x004dd074
+-#define ATH8035_PHY_ID 0x004dd072
++#define AT803X_PHY_ID_MASK                    0xffffffef
++#define ATH8030_PHY_ID                                0x004dd076
++#define ATH8031_PHY_ID                                0x004dd074
++#define ATH8035_PHY_ID                                0x004dd072
+ MODULE_DESCRIPTION("Atheros 803x PHY driver");
+ MODULE_AUTHOR("Matus Ujhelyi");
+@@ -268,6 +272,27 @@ static int at803x_config_init(struct phy
+ {
+       struct at803x_platform_data *pdata;
+       int ret;
++      u32 v;
++
++      if (phydev->drv->phy_id == ATH8031_PHY_ID &&
++              phydev->interface == PHY_INTERFACE_MODE_SGMII)
++      {
++              v = phy_read(phydev, AT803X_REG_CHIP_CONFIG);
++              /* select SGMII/fiber page */
++              ret = phy_write(phydev, AT803X_REG_CHIP_CONFIG,
++                                              v & ~AT803X_BT_BX_REG_SEL);
++              if (ret)
++                      return ret;
++              /* enable SGMII autonegotiation */
++              ret = phy_write(phydev, MII_BMCR, AT803X_SGMII_ANEG_EN);
++              if (ret)
++                      return ret;
++              /* select copper page */
++              ret = phy_write(phydev, AT803X_REG_CHIP_CONFIG,
++                                              v | AT803X_BT_BX_REG_SEL);
++              if (ret)
++                      return ret;
++      }
+       ret = genphy_config_init(phydev);
+       if (ret < 0)
+@@ -394,7 +419,7 @@ static struct phy_driver at803x_driver[]
+       /* ATHEROS 8035 */
+       .phy_id                 = ATH8035_PHY_ID,
+       .name                   = "Atheros 8035 ethernet",
+-      .phy_id_mask            = 0xffffffef,
++      .phy_id_mask            = AT803X_PHY_ID_MASK,
+       .probe                  = at803x_probe,
+       .config_init            = at803x_config_init,
+       .link_change_notify     = at803x_link_change_notify,
+@@ -413,7 +438,7 @@ static struct phy_driver at803x_driver[]
+       /* ATHEROS 8030 */
+       .phy_id                 = ATH8030_PHY_ID,
+       .name                   = "Atheros 8030 ethernet",
+-      .phy_id_mask            = 0xffffffef,
++      .phy_id_mask            = AT803X_PHY_ID_MASK,
+       .probe                  = at803x_probe,
+       .config_init            = at803x_config_init,
+       .link_change_notify     = at803x_link_change_notify,
+@@ -431,8 +456,8 @@ static struct phy_driver at803x_driver[]
+ }, {
+       /* ATHEROS 8031 */
+       .phy_id                 = ATH8031_PHY_ID,
+-      .name                   = "Atheros 8031 ethernet",
+-      .phy_id_mask            = 0xffffffef,
++      .name                   = "Atheros 8031/8033 ethernet",
++      .phy_id_mask            = AT803X_PHY_ID_MASK,
+       .probe                  = at803x_probe,
+       .config_init            = at803x_config_init,
+       .link_change_notify     = at803x_link_change_notify,
+@@ -454,9 +479,9 @@ static struct phy_driver at803x_driver[]
+ module_phy_driver(at803x_driver);
+ static struct mdio_device_id __maybe_unused atheros_tbl[] = {
+-      { ATH8030_PHY_ID, 0xffffffef },
+-      { ATH8031_PHY_ID, 0xffffffef },
+-      { ATH8035_PHY_ID, 0xffffffef },
++      { ATH8030_PHY_ID, AT803X_PHY_ID_MASK },
++      { ATH8031_PHY_ID, AT803X_PHY_ID_MASK },
++      { ATH8035_PHY_ID, AT803X_PHY_ID_MASK },
+       { }
+ };