[openwrt/staging/dedeckeh.git] / package / network / services / openvpn / files / openvpn.config

package openvpn

#################################################
# Sample to include a custom config file.       #
#################################################

config openvpn custom_config

        # Set to 1 to enable this instance:
        option enabled 0

        # Include OpenVPN configuration
        option config /etc/openvpn/my-vpn.conf


#################################################
# Sample OpenVPN 2.0 uci config for             #
# multi-client server.                          #
#################################################

config openvpn sample_server

        # Set to 1 to enable this instance:
        option enabled 0

        # Which local IP address should OpenVPN
        # listen on? (optional)
#       option local 0.0.0.0

        # Which TCP/UDP port should OpenVPN listen on?
        # If you want to run multiple OpenVPN instances
        # on the same machine, use a different port
        # number for each one.  You will need to
        # open up this port on your firewall.
        option port 1194

        # TCP or UDP server?
#       option proto tcp
        option proto udp

        # "dev tun" will create a routed IP tunnel,
        # "dev tap" will create an ethernet tunnel.
        # Use "dev tap0" if you are ethernet bridging
        # and have precreated a tap0 virtual interface
        # and bridged it with your ethernet interface.
        # If you want to control access policies
        # over the VPN, you must create firewall
        # rules for the the TUN/TAP interface.
        # On non-Windows systems, you can give
        # an explicit unit number, such as tun0.
        # On Windows, use "dev-node" for this.
        # On most systems, the VPN will not function
        # unless you partially or fully disable
        # the firewall for the TUN/TAP interface.
#       option dev tap
        option dev tun

        # SSL/TLS root certificate (ca), certificate
        # (cert), and private key (key).  Each client
        # and the server must have their own cert and
        # key file.  The server and all clients will
        # use the same ca file.
        #
        # See the "easy-rsa" directory for a series
        # of scripts for generating RSA certificates
        # and private keys.  Remember to use
        # a unique Common Name for the server
        # and each of the client certificates.
        #
        # Any X509 key management system can be used.
        # OpenVPN can also use a PKCS #12 formatted key file
        # (see "pkcs12" directive in man page).
        option ca /etc/openvpn/ca.crt
        option cert /etc/openvpn/server.crt
        # This file should be kept secret:
        option key /etc/openvpn/server.key

        # Diffie hellman parameters.
        # Generate your own with:
        #   openssl dhparam -out dh1024.pem 1024
        # Substitute 2048 for 1024 if you are using
        # 2048 bit keys.
        option dh /etc/openvpn/dh1024.pem

        # Configure server mode and supply a VPN subnet
        # for OpenVPN to draw client addresses from.
        # The server will take 10.8.0.1 for itself,
        # the rest will be made available to clients.
        # Each client will be able to reach the server
        # on 10.8.0.1. Comment this line out if you are
        # ethernet bridging. See the man page for more info.
        option server "10.8.0.0 255.255.255.0"

        # Maintain a record of client <-> virtual IP address
        # associations in this file.  If OpenVPN goes down or
        # is restarted, reconnecting clients can be assigned
        # the same virtual IP address from the pool that was
        # previously assigned.
        option ifconfig_pool_persist /tmp/ipp.txt

        # Configure server mode for ethernet bridging.
        # You must first use your OS's bridging capability
        # to bridge the TAP interface with the ethernet
        # NIC interface.  Then you must manually set the
        # IP/netmask on the bridge interface, here we
        # assume 10.8.0.4/255.255.255.0.  Finally we
        # must set aside an IP range in this subnet
        # (start=10.8.0.50 end=10.8.0.100) to allocate
        # to connecting clients.  Leave this line commented
        # out unless you are ethernet bridging.
#       option server_bridge "10.8.0.4 255.255.255.0 10.8.0.50 10.8.0.100"

        # Push routes to the client to allow it
        # to reach other private subnets behind
        # the server.  Remember that these
        # private subnets will also need
        # to know to route the OpenVPN client
        # address pool (10.8.0.0/255.255.255.0)
        # back to the OpenVPN server.
#       list push "route 192.168.10.0 255.255.255.0"
#       list push "route 192.168.20.0 255.255.255.0"

        # To assign specific IP addresses to specific
        # clients or if a connecting client has a private
        # subnet behind it that should also have VPN access,
        # use the subdirectory "ccd" for client-specific
        # configuration files (see man page for more info).

        # EXAMPLE: Suppose the client
        # having the certificate common name "Thelonious"
        # also has a small subnet behind his connecting
        # machine, such as 192.168.40.128/255.255.255.248.
        # First, uncomment out these lines:
#       option client_config_dir /etc/openvpn/ccd
#       list route "192.168.40.128 255.255.255.248"
        # Then create a file ccd/Thelonious with this line:
        #   iroute 192.168.40.128 255.255.255.248
        # This will allow Thelonious' private subnet to
        # access the VPN.  This example will only work
        # if you are routing, not bridging, i.e. you are
        # using "dev tun" and "server" directives.

        # EXAMPLE: Suppose you want to give
        # Thelonious a fixed VPN IP address of 10.9.0.1.
        # First uncomment out these lines:
#       option client_config_dir /etc/openvpn/ccd
#       list route "10.9.0.0 255.255.255.252"
#       list route "192.168.100.0 255.255.255.0"
        # Then add this line to ccd/Thelonious:
        #   ifconfig-push "10.9.0.1 10.9.0.2"

        # Suppose that you want to enable different
        # firewall access policies for different groups
        # of clients.  There are two methods:
        # (1) Run multiple OpenVPN daemons, one for each
        #     group, and firewall the TUN/TAP interface
        #     for each group/daemon appropriately.
        # (2) (Advanced) Create a script to dynamically
        #     modify the firewall in response to access
        #     from different clients.  See man
        #     page for more info on learn-address script.
#       option learn_address /etc/openvpn/script

        # If enabled, this directive will configure
        # all clients to redirect their default
        # network gateway through the VPN, causing
        # all IP traffic such as web browsing and
        # and DNS lookups to go through the VPN
        # (The OpenVPN server machine may need to NAT
        # the TUN/TAP interface to the internet in
        # order for this to work properly).
        # CAVEAT: May break client's network config if
        # client's local DHCP server packets get routed
        # through the tunnel.  Solution: make sure
        # client's local DHCP server is reachable via
        # a more specific route than the default route
        # of 0.0.0.0/0.0.0.0.
#       list push "redirect-gateway"

        # Certain Windows-specific network settings
        # can be pushed to clients, such as DNS
        # or WINS server addresses.  CAVEAT:
        # http://openvpn.net/faq.html#dhcpcaveats
#       list push "dhcp-option DNS 10.8.0.1"
#       list push "dhcp-option WINS 10.8.0.1"

        # Uncomment this directive to allow different
        # clients to be able to "see" each other.
        # By default, clients will only see the server.
        # To force clients to only see the server, you
        # will also need to appropriately firewall the
        # server's TUN/TAP interface.
#       option client_to_client 1

        # Uncomment this directive if multiple clients
        # might connect with the same certificate/key
        # files or common names.  This is recommended
        # only for testing purposes.  For production use,
        # each client should have its own certificate/key
        # pair.
        #
        # IF YOU HAVE NOT GENERATED INDIVIDUAL
        # CERTIFICATE/KEY PAIRS FOR EACH CLIENT,
        # EACH HAVING ITS OWN UNIQUE "COMMON NAME",
        # UNCOMMENT THIS LINE OUT.
#       option duplicate_cn 1

        # The keepalive directive causes ping-like
        # messages to be sent back and forth over
        # the link so that each side knows when
        # the other side has gone down.
        # Ping every 10 seconds, assume that remote
        # peer is down if no ping received during
        # a 120 second time period.
        option keepalive "10 120"

        # For extra security beyond that provided
        # by SSL/TLS, create an "HMAC firewall"
        # to help block DoS attacks and UDP port flooding.
        #
        # Generate with:
        #   openvpn --genkey --secret ta.key
        #
        # The server and each client must have
        # a copy of this key.
        # The second parameter should be '0'
        # on the server and '1' on the clients.
        # This file is secret:
#       option tls_auth "/etc/openvpn/ta.key 0"

        # Select a cryptographic cipher.
        # This config item must be copied to
        # the client config file as well.
        # Blowfish (default):
#       option cipher BF-CBC
        # AES:
#       option cipher AES-128-CBC
        # Triple-DES:
#       option cipher DES-EDE3-CBC

        # Enable compression on the VPN link.
        # If you enable it here, you must also
        # enable it in the client config file.
        option comp_lzo yes

        # The maximum number of concurrently connected
        # clients we want to allow.
#       option max_clients 100

        # The persist options will try to avoid
        # accessing certain resources on restart
        # that may no longer be accessible because
        # of the privilege downgrade.
        option persist_key 1
        option persist_tun 1

        # Output a short status file showing
        # current connections, truncated
        # and rewritten every minute.
        option status /tmp/openvpn-status.log

        # By default, log messages will go to the syslog (or
        # on Windows, if running as a service, they will go to
        # the "\Program Files\OpenVPN\log" directory).
        # Use log or log-append to override this default.
        # "log" will truncate the log file on OpenVPN startup,
        # while "log-append" will append to it.  Use one
        # or the other (but not both).
#       option log         /tmp/openvpn.log
#       option log_append  /tmp/openvpn.log

        # Set the appropriate level of log
        # file verbosity.
        #
        # 0 is silent, except for fatal errors
        # 4 is reasonable for general usage
        # 5 and 6 can help to debug connection problems
        # 9 is extremely verbose
        option verb 3

        # Silence repeating messages.  At most 20
        # sequential messages of the same message
        # category will be output to the log.
#       option mute 20


##############################################
# Sample client-side OpenVPN 2.0 uci config  #
# for connecting to multi-client server.     #
##############################################

config openvpn sample_client

        # Set to 1 to enable this instance:
        option enabled 0

        # Specify that we are a client and that we
        # will be pulling certain config file directives
        # from the server.
        option client 1

        # Use the same setting as you are using on
        # the server.
        # On most systems, the VPN will not function
        # unless you partially or fully disable
        # the firewall for the TUN/TAP interface.
#       option dev tap
        option dev tun

        # Are we connecting to a TCP or
        # UDP server?  Use the same setting as
        # on the server.
#       option proto tcp
        option proto udp

        # The hostname/IP and port of the server.
        # You can have multiple remote entries
        # to load balance between the servers.
        list remote "my_server_1 1194"
#       list remote "my_server_2 1194"

        # Choose a random host from the remote
        # list for load_balancing.  Otherwise
        # try hosts in the order specified.
#       option remote_random 1

        # Keep trying indefinitely to resolve the
        # host name of the OpenVPN server.  Very useful
        # on machines which are not permanently connected
        # to the internet such as laptops.
        option resolv_retry infinite

        # Most clients don't need to bind to
        # a specific local port number.
        option nobind 1

        # Try to preserve some state across restarts.
        option persist_key 1
        option persist_tun 1

        # If you are connecting through an
        # HTTP proxy to reach the actual OpenVPN
        # server, put the proxy server/IP and
        # port number here.  See the man page
        # if your proxy server requires
        # authentication.
        # retry on connection failures:
#       option http_proxy_retry 1
        # specify http proxy address and port:
#       option http_proxy "192.168.1.100 8080"

        # Wireless networks often produce a lot
        # of duplicate packets.  Set this flag
        # to silence duplicate packet warnings.
#       option mute_replay_warnings 1

        # SSL/TLS parms.
        # See the server config file for more
        # description.  It's best to use
        # a separate .crt/.key file pair
        # for each client.  A single ca
        # file can be used for all clients.
        option ca /etc/openvpn/ca.crt
        option cert /etc/openvpn/client.crt
        option key /etc/openvpn/client.key

        # Verify server certificate by checking
        # that the certicate has the nsCertType
        # field set to "server".  This is an
        # important precaution to protect against
        # a potential attack discussed here:
        #  http://openvpn.net/howto.html#mitm
        #
        # To use this feature, you will need to generate
        # your server certificates with the nsCertType
        # field set to "server".  The build_key_server
        # script in the easy_rsa folder will do this.
#       option ns_cert_type server

        # If a tls_auth key is used on the server
        # then every client must also have the key.
#       option tls_auth "/etc/openvpn/ta.key 1"

        # Select a cryptographic cipher.
        # If the cipher option is used on the server
        # then you must also specify it here.
#       option cipher x

        # Enable compression on the VPN link.
        # Don't enable this unless it is also
        # enabled in the server config file.
        option comp_lzo yes

        # Set log file verbosity.
        option verb 3

        # Silence repeating messages
#       option mute 20