target/linux/ath79/dts/ar1022_sitecom_wlr-7100.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "ar9344.dtsi"
   8
   9 / {
  10         model = "Sitecom WLR-7100 v1 002 (X7 AC1200)";
  11         compatible = "sitecom,wlr-7100", "qca,ar9344";
  12
  13         aliases {
  14                 led-boot = &led_power;
  15                 led-failsafe = &led_power;
  16                 led-running = &led_power;
  17                 led-upgrade = &led_power;
  18         };
  19
  20         keys {
  21                 compatible = "gpio-keys";
  22
  23                 wlan2g {
  24                         label = "2.4GHz";
  25                         gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
  26                         linux,code = <KEY_RESTART>;
  27                 };
  28
  29                 wlan5g {
  30                         label = "5GHz";
  31                         gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
  32                         linux,code = <KEY_WPS_BUTTON>;
  33                 };
  34         };
  35
  36         leds {
  37                 compatible = "gpio-leds";
  38
  39                 ops {
  40                         label = "wlr-7100:white:ops";
  41                         gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
  42                 };
  43
  44                 led_power: power {
  45                         label = "wlr-7100:amber:power";
  46                         gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
  47                         default-state = "on";
  48                 };
  49
  50                 wlan2g {
  51                         label = "wlr-7100:blue:wlan2g";
  52                         gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
  53                         linux,default-trigger = "phy1tpt";
  54                 };
  55         };
  56 };
  57
  58 &eth0 {
  59         status = "okay";
  60
  61         pll-data = <0x06000000 0x00000101 0x00001616>;
  62
  63         phy-mode = "rgmii";
  64         phy-handle = <&phy0>;
  65
  66         gmac-config {
  67                 device = <&gmac>;
  68                 rgmii-gmac0 = <1>;
  69         };
  70 };
  71
  72 &mdio0 {
  73         status = "okay";
  74
  75         phy0: ethernet-phy@0 {
  76                 reg = <0>;
  77                 phy-mode = "rgmii";
  78
  79                 qca,ar8327-initvals = <
  80                         0x04 0x87a00000 /* PORT0 PAD Mode */
  81                         0x0c 0x01000000 /* PORT6 PAD Mode */
  82                         0x10 0x80000000 /* PWS_REG_VALUE */
  83                         0x7c 0x000000fe /* PORT0_STATUS */
  84                         0x94 0x000000fe /* PORT6_STATUS */
  85                 >;
  86         };
  87 };
  88
  89 &pcie {
  90         status = "okay";
  91
  92         wifi@0,0 {
  93                 compatible = "qcom,ath10k";
  94                 reg = <0x0000 0 0 0 0>;
  95         };
  96 };
  97
  98 &ref {
  99         clock-frequency = <25000000>;
 100 };
 101
 102 &spi {
 103         status = "okay";
 104
 105         num-cs = <1>;
 106
 107         flash@0 {
 108                 compatible = "jedec,spi-nor";
 109                 reg = <0>;
 110                 spi-max-frequency = <25000000>;
 111
 112                 partitions {
 113                         compatible = "fixed-partitions";
 114                         #address-cells = <1>;
 115                         #size-cells = <1>;
 116
 117                         partition@0 {
 118                                 label = "u-boot";
 119                                 reg = <0x000000 0x030000>;
 120                                 read-only;
 121                         };
 122
 123                         uenv: partition@30000 {
 124                                 label = "u-boot-env";
 125                                 reg = <0x030000 0x010000>;
 126                                 read-only;
 127                         };
 128
 129                         partition@40000 {
 130                                 compatible = "denx,uimage";
 131                                 label = "firmware";
 132                                 reg = <0x040000 0x750000>;
 133                         };
 134
 135                         partition@790000 {
 136                                 label = "backup";
 137                                 reg = <0x790000 0x010000>;
 138                                 read-only;
 139                         };
 140
 141                         partition@7a0000 {
 142                                 label = "storage";
 143                                 reg = <0x7a0000 0x050000>;
 144                                 read-only;
 145                         };
 146
 147                         art: partition@7f0000 {
 148                                 label = "art";
 149                                 reg = <0x7f0000 0x010000>;
 150                                 read-only;
 151                         };
 152                 };
 153         };
 154 };
 155
 156 &uart {
 157         status = "okay";
 158 };
 159
 160 &usb {
 161         status = "okay";
 162 };
 163
 164 &usb_phy {
 165         status = "okay";
 166 };
 167
 168 &wmac {
 169         status = "okay";
 170
 171         qca,no-eeprom;
 172 };