target/linux/ath79/dts/ar7161_netgear_wndr3700.dtsi

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "ar7100.dtsi"
   8
   9 / {
  10         aliases {
  11                 led-boot = &power_orange;
  12                 led-failsafe = &power_orange;
  13                 led-running = &power_green;
  14                 led-upgrade = &power_orange;
  15         };
  16
  17         chosen {
  18                 bootargs = "console=ttyS0,115200";
  19         };
  20
  21         extosc: ref {
  22                 compatible = "fixed-clock";
  23                 #clock-cells = <0>;
  24                 clock-output-names = "ref";
  25                 clock-frequency = <40000000>;
  26         };
  27
  28         reset-leds {
  29                 compatible = "reset-leds";
  30
  31                 usb_led {
  32                         label = "netgear:green:usb";
  33                         resets = <&rst 12>;
  34                         trigger-sources = <&usb_ochi_port>, <&usb_echi_port>;
  35                         linux,default-trigger = "usbport";
  36                 };
  37         };
  38
  39         gpio-leds {
  40                 compatible = "gpio-leds";
  41
  42                 wps {
  43                         label = "netgear:orange:wps";
  44                         gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
  45                 };
  46
  47                 power_green: power_green {
  48                         label = "netgear:green:power";
  49                         gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
  50                 };
  51
  52                 power_orange: power_orange {
  53                         label = "netgear:orange:power";
  54                         gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
  55                         default-state = "on";
  56                 };
  57
  58                 wps_green {
  59                         label = "netgear:green:wps";
  60                         gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
  61                 };
  62
  63                 wan_green {
  64                         label = "netgear:green:wan";
  65                         gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
  66                 };
  67         };
  68
  69         ath9k-leds {
  70                 compatible = "gpio-leds";
  71                 wlan2g {
  72                         label = "netgear:green:wlan2g";
  73                         gpios = <&ath9k0 5 GPIO_ACTIVE_LOW>;
  74                         linux,default-trigger = "phy0tpt";
  75                 };
  76                 wlan5g {
  77                         label = "netgear:blue:wlan5g";
  78                         gpios = <&ath9k1 5 GPIO_ACTIVE_LOW>;
  79                         linux,default-trigger = "phy1tpt";
  80                 };
  81         };
  82
  83         keys {
  84                 compatible = "gpio-keys-polled";
  85                 poll-interval = <100>;
  86
  87                 wps {
  88                         label = "wps";
  89                         linux,code = <KEY_WPS_BUTTON>;
  90                         gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
  91                 };
  92
  93                 reset {
  94                         label = "reset";
  95                         linux,code = <KEY_RESTART>;
  96                         gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
  97                 };
  98
  99                 rfkill {
 100                         label = "rfkill";
 101                         linux,code = <KEY_RFKILL>;
 102                         gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
 103                 };
 104         };
 105
 106         rtl8366s {
 107                 compatible = "realtek,rtl8366s";
 108                 gpio-sda = <&gpio 5 GPIO_ACTIVE_HIGH>;
 109                 gpio-sck = <&gpio 7 GPIO_ACTIVE_HIGH>;
 110
 111                 mdio-bus {
 112                         #address-cells = <1>;
 113                         #size-cells = <0>;
 114                         status = "okay";
 115
 116                         phy-mask = <0x10>;
 117
 118                         phy4: ethernet-phy@4 {
 119                                 reg = <4>;
 120                                 phy-mode = "rgmii";
 121                         };
 122                 };
 123         };
 124 };
 125
 126 &usb_phy {
 127         status = "okay";
 128 };
 129
 130 &usb1 {
 131         #address-cells = <1>;
 132         #size-cells = <0>;
 133         status = "okay";
 134
 135         usb_ochi_port: port@1 {
 136                 reg = <1>;
 137                 #trigger-source-cells = <0>;
 138         };
 139 };
 140
 141 &usb2 {
 142         #address-cells = <1>;
 143         #size-cells = <0>;
 144         status = "okay";
 145
 146         usb_echi_port: port@1 {
 147                 reg = <1>;
 148                 #trigger-source-cells = <0>;
 149         };
 150 };
 151
 152 &pcie0 {
 153         status = "okay";
 154
 155         ath9k0: wifi@0,11 {
 156                 compatible = "pci168c,0029";
 157                 reg = <0x8800 0 0 0 0x10000>;
 158                 mtd-mac-address = <&art 0x0>;
 159                 qca,no-eeprom;
 160                 #gpio-cells = <2>;
 161                 gpio-controller;
 162         };
 163
 164         ath9k1: wifi@0,12 {
 165                 compatible = "pci168c,0029";
 166                 reg = <0x9000 0 0 0 0x10000>;
 167                 mtd-mac-address = <&art 0xc>;
 168                 qca,no-eeprom;
 169                 #gpio-cells = <2>;
 170                 gpio-controller;
 171         };
 172 };
 173
 174 &uart {
 175         status = "okay";
 176 };
 177
 178 &spi {
 179         status = "okay";
 180         num-cs = <1>;
 181
 182         flash@0 {
 183                 compatible = "jedec,spi-nor";
 184                 reg = <0>;
 185                 spi-max-frequency = <25000000>;
 186
 187                 partitions: partitions {
 188                         compatible = "fixed-partitions";
 189                         #address-cells = <1>;
 190                         #size-cells = <1>;
 191                 };
 192         };
 193 };
 194
 195 &eth0 {
 196         status = "okay";
 197
 198         pll-data = <0x11110000 0x00001099 0x00991099>;
 199
 200         mtd-mac-address = <&art 0x00>;
 201
 202         fixed-link {
 203                 speed = <1000>;
 204                 full-duplex;
 205         };
 206 };
 207
 208 &eth1 {
 209         status = "okay";
 210
 211         pll-data = <0x11110000 0x00001099 0x00991099>;
 212
 213         mtd-mac-address = <&art 0x06>;
 214
 215         phy-handle = <&phy4>;
 216 };