target/linux/ath79/dts/ar7161_siemens_ws-ap3610.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "ar7100.dtsi"
   8
   9 / {
  10         compatible = "siemens,ws-ap3610", "qca,ar7161";
  11         model = "Siemens WS-AP3610";
  12
  13         aliases {
  14                 led-boot = &led_power_green;
  15                 led-failsafe = &led_power_red;
  16                 led-running = &led_power_green;
  17                 led-upgrade = &led_power_red;
  18                 label-mac-device = &eth0;
  19         };
  20
  21         extosc: ref {
  22                 compatible = "fixed-clock";
  23                 #clock-cells = <0>;
  24                 clock-output-names = "ref";
  25                 clock-frequency = <40000000>;
  26         };
  27
  28         leds {
  29                 compatible = "gpio-leds";
  30
  31                 led_power_green: led_power_green {
  32                         label = "ws-ap3610:green:power";
  33                         gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
  34                 };
  35
  36                 led_power_red: led_power_red {
  37                         label = "ws-ap3610:red:power";
  38                         gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
  39                 };
  40
  41                 led_wlan5_blue {
  42                         label = "ws-ap3610:blue:wlan5";
  43                         gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
  44                         linux,default-trigger = "phy0tpt";
  45                 };
  46
  47                 led_wlan5_green {
  48                         label = "ws-ap3610:green:wlan5";
  49                         gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
  50                 };
  51
  52                 led_wlan2_blue {
  53                         label = "ws-ap3610:blue:wlan2";
  54                         gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
  55                         linux,default-trigger = "phy1tpt";
  56                 };
  57
  58                 led_wlan2_green {
  59                         label = "ws-ap3610:green:wlan2";
  60                         gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
  61                 };
  62         };
  63
  64         keys {
  65                 compatible = "gpio-keys";
  66
  67                 reset {
  68                         label = "reset";
  69                         linux,code = <KEY_RESTART>;
  70                         gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
  71                 };
  72         };
  73 };
  74
  75 &pcie0 {
  76         status = "okay";
  77 };
  78
  79 &uart {
  80         status = "okay";
  81 };
  82
  83 &mdio0 {
  84         status = "okay";
  85
  86         phy0: ethernet-phy@0 {
  87                 /*
  88                  * When the compatible-is missing, PHY autodetection
  89                  * is performed, but the PHY-ID reads all 0xff.
  90                  *
  91                  * Linux does not create the device in this case,
  92                  * and the reset is never even de-asserted.
  93                  */
  94                 compatible = "ethernet-phy-id0143.bca2",
  95                                 "ethernet-phy-ieee802.3-c22";
  96                 reg = <0>;
  97
  98                 resets = <&rst 8>;
  99                 reset-names = "phy";
 100                 reset-assert-us = <10000>;
 101                 reset-deassert-us = <10000>;
 102         };
 103 };
 104
 105 &eth0 {
 106         status = "okay";
 107
 108         phy-mode = "rgmii-id";
 109         phy-handle = <&phy0>;
 110 };
 111
 112 &spi {
 113         status = "okay";
 114
 115         num-cs = <1>;
 116
 117         flash@0 {
 118                 compatible = "jedec,spi-nor";
 119                 reg = <0>;
 120                 spi-max-frequency = <25000000>;
 121
 122                 partitions {
 123                         compatible = "fixed-partitions";
 124                         #address-cells = <1>;
 125                         #size-cells = <1>;
 126
 127                         partition@0 {
 128                                 label = "u-boot";
 129                                 reg = <0x0 0x40000>;
 130                                 read-only;
 131                         };
 132
 133                         partition@40000 {
 134                                 label = "u-boot-bak";
 135                                 reg = <0x40000 0x40000>;
 136                                 read-only;
 137                         };
 138
 139                         partition@80000 {
 140                                 compatible = "denx,uimage";
 141                                 label = "firmware";
 142                                 reg = <0x80000 0xe00000>;
 143                         };
 144
 145                         partition@e80000 {
 146                                 label = "cfg1";
 147                                 reg = <0xe80000 0x40000>;
 148                                 read-only;
 149                         };
 150
 151                         partition@ec0000 {
 152                                 label = "cfg2";
 153                                 reg = <0xec0000 0x40000>;
 154                                 read-only;
 155                         };
 156
 157                         partition@f00000 {
 158                                 label = "nvram1";
 159                                 reg = <0xf00000 0x40000>;
 160                                 read-only;
 161                         };
 162
 163                         partition@f40000 {
 164                                 label = "nvram2";
 165                                 reg = <0xf40000 0x40000>;
 166                                 read-only;
 167                         };
 168
 169                         partition@f80000 {
 170                                 label = "rsvd1";
 171                                 reg = <0xf80000 0x40000>;
 172                                 read-only;
 173                         };
 174
 175                         partition@fc0000 {
 176                                 label = "rsvd2";
 177                                 reg = <0xfc0000 0x40000>;
 178                                 read-only;
 179                         };
 180                 };
 181         };
 182 };