target/linux/ath79/dts/ar7240_netgear_wnr612-v2.dtsi

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2
   3 #include <dt-bindings/gpio/gpio.h>
   4 #include <dt-bindings/input/input.h>
   5
   6 #include "ar7240.dtsi"
   7
   8 / {
   9         aliases {
  10                 led-boot = &led_power;
  11                 led-failsafe = &led_power;
  12                 led-running = &led_power;
  13                 led-upgrade = &led_power;
  14                 label-mac-device = &eth1;
  15         };
  16
  17         ath9k-keys {
  18                 compatible = "gpio-keys-polled";
  19                 poll-interval = <20>;
  20
  21                 reset {
  22                         label = "reset";
  23                         linux,code = <KEY_RESTART>;
  24                         gpios = <&ath9k 7 GPIO_ACTIVE_LOW>;
  25                         debounce-interval = <60>;
  26                 };
  27         };
  28
  29         leds {
  30                 compatible = "gpio-leds";
  31
  32                 pinctrl-names = "default";
  33                 pinctrl-0 = <&jtag_disable_pins &switch_led_disable_pins &clks_disable_pins>;
  34
  35                 led_power: power {
  36                         label = "netgear:green:power";
  37                         gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
  38                 };
  39
  40                 lan1 {
  41                         label = "netgear:green:lan1";
  42                         gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
  43                 };
  44
  45                 lan2 {
  46                         label = "netgear:green:lan2";
  47                         gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
  48                 };
  49
  50                 wan {
  51                         label = "netgear:green:wan";
  52                         gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
  53                 };
  54         };
  55
  56         ath9k-leds {
  57                 compatible = "gpio-leds";
  58
  59                 wlan {
  60                         label = "netgear:green:wlan";
  61                         gpios = <&ath9k 1 GPIO_ACTIVE_LOW>;
  62                         linux,default-trigger = "phy0tpt";
  63                 };
  64         };
  65 };
  66
  67 &spi {
  68         status = "okay";
  69
  70         num-cs = <1>;
  71
  72         flash@0 {
  73                 compatible = "jedec,spi-nor";
  74                 reg = <0>;
  75                 spi-max-frequency = <25000000>;
  76
  77                 partitions {
  78                         compatible = "fixed-partitions";
  79                         #address-cells = <1>;
  80                         #size-cells = <1>;
  81
  82                         partition@0 {
  83                                 reg = <0x0 0x40000>;
  84                                 label = "u-boot";
  85                                 read-only;
  86                         };
  87
  88                         partition@40000 {
  89                                 reg = <0x40000 0x10000>;
  90                                 label = "u-boot-env";
  91                         };
  92
  93                         partition@50000 {
  94                                 compatible = "netgear,uimage";
  95                                 reg = <0x50000 0x3a0000>;
  96                                 label = "firmware";
  97                         };
  98
  99                         art: partition@3f0000 {
 100                                 reg = <0x3f0000 0x10000>;
 101                                 label = "art";
 102                                 read-only;
 103                         };
 104                 };
 105         };
 106 };
 107
 108 &eth0 {
 109         status = "okay";
 110
 111         mtd-mac-address = <&art 0x0>;
 112 };
 113
 114 &eth1 {
 115         status = "okay";
 116
 117         mtd-mac-address = <&art 0x6>;
 118 };
 119
 120 &pcie {
 121         status = "okay";
 122
 123         ath9k: wifi@0,0 {
 124                 compatible = "pci168c,002b";
 125                 reg = <0x0000 0 0 0 0>;
 126                 mtd-mac-address = <&art 0x0>;
 127                 mtd-mac-address-increment = <1>;
 128                 qca,no-eeprom;
 129                 #gpio-cells = <2>;
 130                 gpio-controller;
 131         };
 132 };
 133
 134 &uart {
 135         status = "okay";
 136 };