target/linux/ath79/dts/ar7241_ubnt_xm.dtsi

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2
   3 #include <dt-bindings/gpio/gpio.h>
   4 #include <dt-bindings/input/input.h>
   5
   6 #include "ar7241.dtsi"
   7
   8 / {
   9         compatible = "ubnt,xm", "qca,ar7241";
  10         model = "Ubiquiti Networks XM (rev 1.0) board";
  11
  12         keys {
  13                 compatible = "gpio-keys";
  14
  15                 reset {
  16                         linux,code = <KEY_RESTART>;
  17                         gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
  18                         debounce-interval = <60>;
  19                 };
  20         };
  21 };
  22
  23 &uart {
  24         status = "okay";
  25 };
  26
  27 &spi {
  28         status = "okay";
  29
  30         num-cs = <1>;
  31
  32         flash@0 {
  33                 compatible = "jedec,spi-nor";
  34                 reg = <0>;
  35                 spi-max-frequency = <25000000>;
  36
  37                 partitions {
  38                         compatible = "fixed-partitions";
  39                         #address-cells = <1>;
  40                         #size-cells = <1>;
  41
  42                         partition@0 {
  43                                 label = "u-boot";
  44                                 reg = <0x000000 0x040000>;
  45                                 read-only;
  46                         };
  47
  48                         partition@40000 {
  49                                 label = "u-boot-env";
  50                                 reg = <0x040000 0x010000>;
  51                         };
  52
  53                         partition@50000 {
  54                                 compatible = "denx,uimage";
  55                                 label = "firmware";
  56                                 reg = <0x050000 0x750000>;
  57                         };
  58
  59                         partition@7a0000 {
  60                                 label = "board_config";
  61                                 reg = <0x7a0000 0x010000>;
  62                                 read-only;
  63                         };
  64
  65                         partition@7b0000 {
  66                                 label = "cfg";
  67                                 reg = <0x7b0000 0x040000>;
  68                                 read-only;
  69                         };
  70
  71                         art: partition@7f0000 {
  72                                 label = "art";
  73                                 reg = <0x7f0000 0x010000>;
  74                                 read-only;
  75                         };
  76                 };
  77         };
  78 };
  79
  80 &pcie {
  81         status = "okay";
  82
  83         wifi: wifi@0,0 {
  84                 reg = <0x0000 0 0 0 0>;
  85                 qca,no-eeprom;
  86         };
  87 };
  88
  89 &eth0 {
  90         status = "okay";
  91
  92         mtd-mac-address = <&art 0x0>;
  93 };
  94
  95 &eth1 {
  96         status = "okay";
  97
  98         mtd-mac-address = <&art 0x6>;
  99 };