target/linux/ath79/dts/ar7242_ubnt_edgeswitch-5xp.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include "ar7242_ubnt_sw.dtsi"
   5
   6 / {
   7         compatible = "ubnt,edgeswitch-5xp", "qca,ar7242";
   8         model = "Ubiquiti EdgeSwitch 5XP";
   9
  10         gpio-export {
  11                 compatible = "gpio-export";
  12
  13                 poe_24v_port1 {
  14                         gpio-export,name = "ubnt:24v-poe:port1";
  15                         gpio-export,output = <0>;
  16                         gpios = <&gpio_hc595 1 GPIO_ACTIVE_HIGH>;
  17                 };
  18
  19                 poe_24v_port2 {
  20                         gpio-export,name = "ubnt:24v-poe:port2";
  21                         gpio-export,output = <0>;
  22                         gpios = <&gpio_hc595 3 GPIO_ACTIVE_HIGH>;
  23                 };
  24
  25                 poe_24v_port3 {
  26                         gpio-export,name = "ubnt:24v-poe:port3";
  27                         gpio-export,output = <0>;
  28                         gpios = <&gpio_hc595 5 GPIO_ACTIVE_HIGH>;
  29                 };
  30
  31                 poe_24v_port4 {
  32                         gpio-export,name = "ubnt:24v-poe:port4";
  33                         gpio-export,output = <0>;
  34                         gpios = <&gpio_hc595 7 GPIO_ACTIVE_HIGH>;
  35                 };
  36
  37                 poe_24v_port5 {
  38                         gpio-export,name = "ubnt:24v-poe:port5";
  39                         gpio-export,output = <0>;
  40                         gpios = <&gpio_hc595 9 GPIO_ACTIVE_HIGH>;
  41                 };
  42         };
  43 };
  44
  45 &mdio0 {
  46         status = "okay";
  47
  48         phy0: ethernet-switch@0 {
  49                 compatible = "qca,ar8327";
  50                 reg = <0x0>;
  51
  52                 qca,ar8327-initvals = <
  53                         0x04 0x05100000 /* PORT0 PAD MODE CTRL */
  54                         0x0c 0x05100000 /* PORT6 PAD MODE CTRL */
  55                         0x50 0x40004000 /* LED_CTRL0 */
  56                         0x54 0x40004000 /* LED_CTRL1 */
  57                         0x58 0x40004000 /* LED_CTRL2 */
  58                         0x5c 0x03ffff00 /* LED_CTRL3 */
  59                         0x7c 0x0000007e /* PORT0_STATUS */
  60                         0x94 0x0000007e /* PORT6_STATUS */
  61                 >;
  62         };
  63 };
  64
  65 &eth0 {
  66         status = "okay";
  67
  68         phy-handle = <&phy0>;
  69         phy-mode = "rgmii";
  70
  71         mtd-mac-address = <&art 0x0>;
  72
  73         fixed-link {
  74                 speed = <1000>;
  75                 full-duplex;
  76         };
  77 };