target/linux/ath79/dts/ar724x_ubnt_xm.dtsi

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2
   3 #include <dt-bindings/gpio/gpio.h>
   4 #include <dt-bindings/input/input.h>
   5
   6 / {
   7         keys {
   8                 compatible = "gpio-keys";
   9
  10                 reset {
  11                         linux,code = <KEY_RESTART>;
  12                         gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
  13                         debounce-interval = <60>;
  14                 };
  15         };
  16 };
  17
  18 &uart {
  19         status = "okay";
  20 };
  21
  22 &spi {
  23         status = "okay";
  24
  25         num-cs = <1>;
  26
  27         flash@0 {
  28                 compatible = "jedec,spi-nor";
  29                 reg = <0>;
  30                 spi-max-frequency = <25000000>;
  31
  32                 partitions {
  33                         compatible = "fixed-partitions";
  34                         #address-cells = <1>;
  35                         #size-cells = <1>;
  36
  37                         partition@0 {
  38                                 label = "u-boot";
  39                                 reg = <0x000000 0x040000>;
  40                                 read-only;
  41                         };
  42
  43                         partition@40000 {
  44                                 label = "u-boot-env";
  45                                 reg = <0x040000 0x010000>;
  46                         };
  47
  48                         partition@50000 {
  49                                 compatible = "denx,uimage";
  50                                 label = "firmware";
  51                                 reg = <0x050000 0x750000>;
  52                         };
  53
  54                         partition@7a0000 {
  55                                 label = "board_config";
  56                                 reg = <0x7a0000 0x010000>;
  57                                 read-only;
  58                         };
  59
  60                         partition@7b0000 {
  61                                 label = "cfg";
  62                                 reg = <0x7b0000 0x040000>;
  63                                 read-only;
  64                         };
  65
  66                         art: partition@7f0000 {
  67                                 label = "art";
  68                                 reg = <0x7f0000 0x010000>;
  69                                 read-only;
  70                         };
  71                 };
  72         };
  73 };
  74
  75 &pcie {
  76         status = "okay";
  77
  78         wifi: wifi@0,0 {
  79                 reg = <0x0000 0 0 0 0>;
  80                 qca,no-eeprom;
  81         };
  82 };
  83
  84 &eth0 {
  85         status = "okay";
  86
  87         mtd-mac-address = <&art 0x0>;
  88 };
  89
  90 &eth1 {
  91         status = "okay";
  92
  93         mtd-mac-address = <&art 0x6>;
  94 };