target/linux/ath79/dts/ar9342_ubnt_nanostation-ac.dts

   1 // SPDX-License-Identifier: GPL-2.0
   2 /dts-v1/;
   3
   4 #include "ar9342_ubnt_wa.dtsi"
   5
   6 / {
   7         compatible = "ubnt,nanostation-ac","ubnt,wa", "qca,ar9342";
   8         model = "Ubiquiti Nanostation AC (WA)";
   9
  10         aliases {
  11                 led-boot = &led_rssi3;
  12                 led-failsafe = &led_rssi3;
  13                 led-upgrade = &led_rssi3;
  14         };
  15
  16         leds {
  17                 compatible = "gpio-leds";
  18
  19                 rssi0 {
  20                         label = "ubnt:blue:rssi0";
  21                         gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
  22                 };
  23
  24                 rssi1 {
  25                         label = "ubnt:blue:rssi1";
  26                         gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
  27                 };
  28
  29                 rssi2 {
  30                         label = "ubnt:blue:rssi2";
  31                         gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
  32                 };
  33
  34                 led_rssi3: rssi3 {
  35                         label = "ubnt:blue:rssi3";
  36                         gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
  37                 };
  38         };
  39 };
  40
  41 &mdio0 {
  42         status = "okay";
  43
  44         phy-mask = <4>;
  45         phy0: ethernet-phy@0 {
  46                 phy-mode = "rgmii";
  47                 reg = <0>;
  48
  49                 qca,ar8327-initvals = <
  50                         0x04 0x07600000 /* PORT0 PAD MODE CTRL */
  51                         0x58 0xffb7ffb7 /* LED_CTRL2 */
  52                         0x5c 0x03ffff00 /* LED_CTRL3 */
  53                         0x7c 0x0000007e /* PORT0_STATUS */
  54                 >;
  55         };
  56 };
  57
  58 &eth0 {
  59         status = "okay";
  60
  61         /* default for ar934x, except for 1000M and 10M */
  62         pll-data = <0x06000000 0x00000101 0x00001313>;
  63
  64         mtd-mac-address = <&art 0x0>;
  65
  66         phy-mode = "rgmii";
  67         phy-handle = <&phy0>;
  68
  69         gmac-config {
  70                 device = <&gmac>;
  71                 rxd-delay = <2>;
  72                 rxdv-delay = <2>;
  73         };
  74 };
  75
  76 &wmac {
  77         status = "okay";
  78
  79         mtd-cal-data = <&art 0x1000>;
  80 };