target/linux/ath79/dts/ar9342_ubnt_powerbeam-5ac-gen2.dts

   1 // SPDX-License-Identifier: GPL-2.0
   2 /dts-v1/;
   3
   4 #include "ar9342_ubnt_wa.dtsi"
   5
   6 / {
   7         compatible = "ubnt,powerbeam-5ac-gen2", "ubnt,wa", "qca,ar9342";
   8         model = "Ubiquiti PowerBeam 5AC Gen2";
   9
  10         aliases {
  11                 led-boot = &led_rssi3;
  12                 led-failsafe = &led_rssi3;
  13                 led-upgrade = &led_rssi3;
  14         };
  15
  16         leds {
  17                 compatible = "gpio-leds";
  18
  19                 rssi0 {
  20                         label = "ubnt:blue:rssi0";
  21                         gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
  22                 };
  23
  24                 rssi1 {
  25                         label = "ubnt:blue:rssi1";
  26                         gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
  27                 };
  28
  29                 rssi2 {
  30                         label = "ubnt:blue:rssi2";
  31                         gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
  32                 };
  33
  34                 led_rssi3: rssi3 {
  35                         label = "ubnt:blue:rssi3";
  36                         gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
  37                 };
  38         };
  39 };
  40
  41 &mdio0 {
  42         status = "okay";
  43
  44         phy-mask = <4>;
  45         phy4: ethernet-phy@4 {
  46                 reg = <4>;
  47         };
  48 };
  49
  50 &eth0 {
  51         status = "okay";
  52
  53         /* default for ar934x, except for 1000M and 10M */
  54         pll-data = <0x02000000 0x00000101 0x00001313>;
  55
  56         mtd-mac-address = <&art 0x0>;
  57
  58         phy-mode = "rgmii-id";
  59         phy-handle = <&phy4>;
  60
  61         gmac-config {
  62                 device = <&gmac>;
  63                 rxd-delay = <3>;
  64                 rxdv-delay = <3>;
  65         };
  66 };