target/linux/ath79/dts/ar9344_devolo_magic-2-wifi.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "ar9344.dtsi"
   8
   9 / {
  10         model = "Devolo Magic 2 Wifi";
  11         compatible = "devolo,magic-2-wifi", "qca,ar9344";
  12
  13         aliases {
  14                 led-boot = &led_dlan_red;
  15                 led-failsafe = &led_dlan_red;
  16                 led-running = &led_dlan_white;
  17                 led-upgrade = &led_dlan_red;
  18         };
  19
  20         leds {
  21                 compatible = "gpio-leds";
  22
  23                 wlan {
  24                         label = "devolo:white:wlan";
  25                         gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
  26                         linux,default-trigger = "phy1tpt";
  27                 };
  28
  29                 led_dlan_white: dlan_white {
  30                         label = "devolo:white:dlan";
  31                         gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
  32                 };
  33
  34                 led_dlan_red: dlan_red {
  35                         label = "devolo:red:dlan";
  36                         gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
  37                         panic-indicator;
  38                 };
  39         };
  40
  41         keys {
  42                 compatible = "gpio-keys";
  43
  44                 reset {
  45                         label = "Reset button";
  46                         linux,code = <KEY_RESTART>;
  47                         gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
  48                         debounce-interval = <60>;
  49                 };
  50
  51                 wifi {
  52                         label = "WIFI button";
  53                         linux,code = <KEY_RFKILL>;
  54                         gpios = <&gpio 20 GPIO_ACTIVE_HIGH>;
  55                         debounce-interval = <60>;
  56                 };
  57
  58                 dlan {
  59                         label = "DLAN button";
  60                         linux,code = <BTN_0>;
  61                         gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
  62                         debounce-interval = <60>;
  63                 };
  64         };
  65 };
  66
  67 &gpio {
  68         status = "okay";
  69
  70         wlan_power {
  71                 gpio-hog;
  72                 line-name = "WLAN power";
  73                 gpios = <&gpio 21 GPIO_ACTIVE_HIGH>;
  74                 output-high;
  75         };
  76 };
  77
  78 &spi {
  79         status = "okay";
  80
  81         num-cs = <1>;
  82
  83         flash@0 {
  84                 compatible = "jedec,spi-nor";
  85                 reg = <0>;
  86                 spi-max-frequency = <25000000>;
  87
  88                 partitions {
  89                         compatible = "fixed-partitions";
  90                         #address-cells = <1>;
  91                         #size-cells = <1>;
  92
  93                         uboot: partition@0 {
  94                                 label = "u-boot";
  95                                 reg = <0x0 0x40000>;
  96                                 read-only;
  97                         };
  98
  99                         partition@40000 {
 100                                 label = "u-boot-env";
 101                                 reg = <0x40000 0x10000>;
 102                                 read-only;
 103                         };
 104
 105                         partition@50000 {
 106                                 label = "Config1";
 107                                 reg = <0x50000 0x10000>;
 108                                 read-only;
 109                         };
 110
 111                         partition@60000 {
 112                                 label = "Config2";
 113                                 reg = <0x60000 0x10000>;
 114                                 read-only;
 115                         };
 116
 117                         partition@70000 {
 118                                 compatible = "denx,uimage";
 119                                 label = "firmware";
 120                                 reg = <0x70000 0xf80000>;
 121                         };
 122
 123                         art: partition@ff0000 {
 124                                 label = "art";
 125                                 reg = <0xff0000 0x10000>;
 126                                 read-only;
 127                         };
 128                 };
 129         };
 130 };
 131
 132 &ref {
 133         clock-frequency = <40000000>;
 134 };
 135
 136 &uart {
 137         status = "okay";
 138 };
 139
 140 &eth0 {
 141         status = "okay";
 142
 143         pll-data = <0x02000000 0x00000101 0x00001616>;
 144
 145         mtd-mac-address = <&art 0x1002>;
 146         mtd-mac-address-increment = <2>;
 147
 148         phy-mode = "rgmii";
 149         phy-handle = <&phy0>;
 150 };
 151
 152 &wmac {
 153         status = "okay";
 154
 155         mtd-cal-data = <&art 0x1000>;
 156 };
 157
 158 &pcie {
 159         status = "okay";
 160
 161         wifi@0,0 {
 162                 compatible = "qcom,ath10k";
 163                 reg = <0 0 0 0 0>;
 164         };
 165 };
 166
 167 &mdio0 {
 168         status = "okay";
 169
 170         phy0: ethernet-phy@0 {
 171                 reg = <0>;
 172                 phy-mode = "rgmii";
 173
 174                 qca,ar8327-initvals = <
 175                         /* PORT0: RGMII, MAC0/6 exchage, tx_delay 01, No rx_delay */
 176                         0x04 0x06400000
 177                         0x08 0x00000000 /* PORT5 PAD MODE CTRL */
 178                         0x0c 0x00000000 /* PORT6 PAD MODE CTRL */
 179                         0x7c 0x0000007e /* PORT0_STATUS */
 180                 >;
 181         };
 182 };