target/linux/ath79/dts/ar9344_ocedo_raccoon.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "ar9344.dtsi"
   8
   9 / {
  10         model = "OCEDO Raccoon";
  11         compatible = "ocedo,raccoon", "qca,ar9344";
  12
  13         chosen {
  14                 bootargs = "console=ttyS0,115200n8";
  15         };
  16
  17         aliases {
  18                 led-boot = &led_system;
  19                 led-failsafe = &led_system;
  20                 led-running = &led_system;
  21                 led-upgrade = &led_system;
  22         };
  23
  24         leds {
  25                 compatible = "gpio-leds";
  26
  27                 power {
  28                         label = "raccoon:green:power";
  29                         gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
  30                         default-state = "on";
  31                 };
  32
  33                 wlan2g {
  34                         label = "raccoon:yellow:wlan24";
  35                         gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
  36                         linux,default-trigger = "phy0tpt";
  37                 };
  38
  39                 led_system: system {
  40                         label = "raccoon:blue:sys";
  41                         gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
  42                 };
  43         };
  44
  45         ath9k-leds {
  46                 compatible = "gpio-leds";
  47
  48                 wlan5g {
  49                         label = "raccoon:red:wlan5";
  50                         gpios = <&ath9k 0 GPIO_ACTIVE_LOW>;
  51                         linux,default-trigger = "phy1tpt";
  52                 };
  53         };
  54
  55         keys {
  56                 compatible = "gpio-keys";
  57
  58                 reset {
  59                         linux,code = <KEY_RESTART>;
  60                         gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
  61                         debounce-interval = <60>;
  62                 };
  63         };
  64 };
  65
  66 &ref {
  67         clock-frequency = <40000000>;
  68 };
  69
  70 &uart {
  71         status = "okay";
  72 };
  73
  74 &gpio {
  75         status = "okay";
  76 };
  77
  78 &spi {
  79         status = "okay";
  80
  81         num-cs = <1>;
  82
  83         flash@0 {
  84                 compatible = "jedec,spi-nor";
  85                 reg = <0>;
  86                 spi-max-frequency = <25000000>;
  87
  88                 partitions {
  89                         compatible = "fixed-partitions";
  90                         #address-cells = <1>;
  91                         #size-cells = <1>;
  92
  93                         uboot: partition@0 {
  94                                 label = "u-boot";
  95                                 reg = <0x000000 0x040000>;
  96                                 read-only;
  97                         };
  98
  99                         partition@40000 {
 100                                 label = "u-boot-env";
 101                                 reg = <0x040000 0x010000>;
 102                         };
 103
 104                         partition@50000 {
 105                                 compatible = "denx,uimage";
 106                                 label = "firmware";
 107                                 reg = <0x050000 0x740000>;
 108                         };
 109
 110                         partition@790000 {
 111                                 label = "vendor";
 112                                 reg = <0x790000 0x740000>;
 113                                 read-only;
 114                         };
 115
 116                         partition@ed0000 {
 117                                 label = "data";
 118                                 reg = <0xed0000 0x110000>;
 119                                 read-only;
 120                         };
 121
 122                         partition@fe0000 {
 123                                 label = "id";
 124                                 reg = <0xfe0000 0x010000>;
 125                                 read-only;
 126                         };
 127
 128                         art: partition@ff0000 {
 129                                 label = "art";
 130                                 reg = <0xff0000 0x010000>;
 131                                 read-only;
 132                         };
 133                 };
 134         };
 135 };
 136
 137 &pcie {
 138         status = "okay";
 139
 140         ath9k: wifi@0,0 {
 141                 compatible = "pci168c,0030";
 142                 reg = <0x0000 0 0 0 0>;
 143                 mtd-mac-address = <&art 0xc>;
 144                 qca,no-eeprom;
 145                 #gpio-cells = <2>;
 146                 gpio-controller;
 147         };
 148 };
 149
 150 &wmac {
 151         status = "okay";
 152
 153         mtd-cal-data = <&art 0x1000>;
 154         mtd-mac-address = <&art 0x6>;
 155 };
 156
 157 &mdio0 {
 158         status = "okay";
 159
 160         phy-mask = <0>;
 161
 162         phy0: ethernet-phy@0 {
 163                 reg = <0>;
 164         };
 165 };
 166
 167 &eth0 {
 168         status = "okay";
 169
 170         pll-data = <0x06000000 0x00000101 0x00001313>;
 171
 172         mtd-mac-address = <&art 0x0>;
 173
 174         phy-mode = "rgmii-id";
 175         phy-handle = <&phy0>;
 176 };