target/linux/ath79/dts/ar9344_pcs_cr5000.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "ar9344.dtsi"
   8
   9 / {
  10         model = "PowerCloud Systems CR5000";
  11         compatible = "pcs,cr5000", "qca,ar9344";
  12
  13         aliases {
  14                 serial0 = &uart;
  15                 led-boot = &led_power;
  16                 led-failsafe = &led_power;
  17                 led-running = &led_power;
  18                 led-upgrade = &led_power;
  19         };
  20
  21         keys {
  22                 compatible = "gpio-keys";
  23
  24                 pinctrl-names = "default";
  25                 pinctrl-0 = <&jtag_disable_pins>;
  26
  27                 reset {
  28                         label = "Reset button";
  29                         linux,code = <KEY_RESTART>;
  30                         gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
  31                         debounce-interval = <60>;
  32                 };
  33
  34                 wps {
  35                         label = "WPS button";
  36                         linux,code = <KEY_WPS_BUTTON>;
  37                         gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
  38                         debounce-interval = <60>;
  39                 };
  40         };
  41
  42         leds {
  43                 compatible = "gpio-leds";
  44
  45                 led_power: power {
  46                         label = "pcs:amber:power";
  47                         gpios = <&gpio 2 GPIO_ACTIVE_LOW>,
  48                                 <&gpio 4 GPIO_ACTIVE_LOW>;
  49                         default-state = "on";
  50                 };
  51
  52                 wlan2g {
  53                         label = "pcs:blue:wlan";
  54                         gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
  55                         linux,default-trigger = "phy0tpt";
  56                 };
  57
  58                 wps_white {
  59                         label = "pcs:white:wps";
  60                         gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
  61                 };
  62         };
  63 };
  64
  65 &ref {
  66         clock-frequency = <25000000>;
  67 };
  68
  69 &uart {
  70         status = "okay";
  71 };
  72
  73 &gpio {
  74         status = "okay";
  75 };
  76
  77 &spi {
  78         status = "okay";
  79
  80         num-cs = <1>;
  81
  82         flash@0 {
  83                 compatible = "jedec,spi-nor";
  84                 reg = <0>;
  85                 spi-max-frequency = <25000000>;
  86
  87                 partitions {
  88                         compatible = "fixed-partitions";
  89                         #address-cells = <1>;
  90                         #size-cells = <1>;
  91
  92                         uboot: partition@0 {
  93                                 label = "u-boot";
  94                                 reg = <0x000000 0x040000>;
  95                                 read-only;
  96                         };
  97
  98                         partition@40000 {
  99                                 label = "u-boot-env";
 100                                 reg = <0x040000 0x010000>;
 101                                 read-only;
 102                         };
 103
 104                         partition@50000 {
 105                                 compatible = "denx,uimage";
 106                                 label = "firmware";
 107                                 reg = <0x050000 0x07a0000>;
 108                         };
 109
 110                         art: partition@7f0000 {
 111                                 label = "art";
 112                                 reg = <0x7f0000 0x010000>;
 113                                 read-only;
 114                         };
 115                 };
 116         };
 117 };
 118
 119 &usb {
 120         status = "okay";
 121         #address-cells = <1>;
 122         #size-cells = <0>;
 123
 124         hub_port1: port@1 {
 125                 reg = <1>;
 126                 #trigger-source-cells = <0>;
 127         };
 128 };
 129
 130 &usb_phy {
 131         status = "okay";
 132 };
 133
 134 &pcie {
 135         status = "okay";
 136
 137         ath9k: wifi@0,0 {
 138                 compatible = "pci168c,0030";
 139                 reg = <0x0000 0 0 0 0>;
 140                 mtd-mac-address = <&art 0x5002>;
 141                 #gpio-cells = <2>;
 142                 gpio-controller;
 143         };
 144 };
 145
 146 &mdio0 {
 147         status = "okay";
 148
 149         phy-mask = <0>;
 150
 151         phy0: ethernet-phy@0 {
 152                 reg = <0>;
 153                 phy-mode = "rgmii";
 154                 qca,ar8327-initvals = <
 155                         0x04 0x07600000 /* PORT0 PAD MODE CTRL */
 156                         0x10 0x81000080 /* POWER_ON_STRAP */
 157                         0x50 0xcc35cc35 /* LED_CTRL0 */
 158                         0x54 0xca35ca35 /* LED_CTRL1 */
 159                         0x58 0xc935c935 /* LED_CTRL2 */
 160                         0x5c 0x03ffff00 /* LED_CTRL3 */
 161                         0x7c 0x0000007e /* PORT0_STATUS */
 162                 >;
 163         };
 164 };
 165
 166 &eth0 {
 167         #address-cells = <1>;
 168         #size-cells = <0>;
 169         status = "okay";
 170
 171         /* default for ar934x, except for 1000M */
 172         pll-data = <0x06000000 0x00000101 0x00001616>;
 173
 174         mtd-mac-address = <&art 0x0>;
 175
 176         phy-mode = "rgmii";
 177         phy-handle = <&phy0>;
 178
 179         aliases {
 180                 ag0 = &eth1;
 181         };
 182
 183         port@0 {
 184                 compatible = "swconfig,port";
 185                 reg = <0>;
 186                 swconfig,segment = "lan";
 187                 swconfig,portmap = <1 1>;
 188         };
 189
 190         port@1 {
 191                 compatible = "swconfig,port";
 192                 reg = <1>;
 193                 swconfig,segment = "lan";
 194                 swconfig,portmap = <2 2>;
 195         };
 196
 197         port@2 {
 198                 compatible = "swconfig,port";
 199                 reg = <2>;
 200                 swconfig,segment = "lan";
 201                 swconfig,portmap = <3 3>;
 202         };
 203
 204         port@3 {
 205                 compatible = "swconfig,port";
 206                 reg = <3>;
 207                 swconfig,segment = "lan";
 208                 swconfig,portmap = <4 4>;
 209         };
 210
 211         port@4 {
 212                 compatible = "swconfig,port";
 213                 reg = <4>;
 214                 swconfig,segment = "wan";
 215                 swconfig,portmap = <5 5>;
 216         };
 217 };
 218
 219 &wmac {
 220         status = "okay";
 221
 222         mtd-cal-data = <&art 0x1000>;
 223 };