target/linux/ath79/dts/qca9531_glinet_gl-ar750.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "qca953x.dtsi"
   8
   9 / {
  10         compatible = "glinet,gl-ar750", "qca,qca9531";
  11         model = "GL.iNet GL-AR750";
  12
  13         aliases {
  14                 led-boot = &led_power;
  15                 led-failsafe = &led_power;
  16                 led-running = &led_power;
  17                 led-upgrade = &led_power;
  18                 label-mac-device = &eth0;
  19         };
  20
  21         keys {
  22                 compatible = "gpio-keys";
  23
  24                 pinctrl-names = "default";
  25                 pinctrl-0 = <&jtag_disable_pins>;
  26
  27                 reset {
  28                         label = "reset";
  29                         linux,code = <KEY_RESTART>;
  30                         gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
  31                 };
  32
  33                 mode {
  34                         label = "mode";
  35                         linux,code = <BTN_0>;
  36                         gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
  37                 };
  38         };
  39
  40         leds {
  41                 compatible = "gpio-leds";
  42
  43                 led_power: power {
  44                         label = "gl-ar750:white:power";
  45                         gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
  46                         default-state = "on";
  47                 };
  48
  49                 wlan2g {
  50                         label = "gl-ar750:white:wlan2g";
  51                         gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
  52                         linux,default-trigger = "phy1tpt";
  53                 };
  54
  55                 wlan5g {
  56                         label = "gl-ar750:white:wlan5g";
  57                         gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
  58                         linux,default-trigger = "phy0tpt";
  59                 };
  60         };
  61
  62         i2c {
  63                 compatible = "i2c-gpio";
  64
  65                 sda-gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
  66                 scl-gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
  67         };
  68 };
  69
  70 &pcie0 {
  71         status = "okay";
  72
  73         wifi@0,0 {
  74                 compatible = "qcom,ath10k";
  75                 reg = <0 0 0 0 0>;
  76                 device_type = "pci";
  77         };
  78 };
  79
  80 &uart {
  81         status = "okay";
  82 };
  83
  84 &usb0 {
  85         status = "okay";
  86 };
  87
  88 &usb_phy {
  89         status = "okay";
  90 };
  91
  92 &spi {
  93         status = "okay";
  94         num-cs = <0>;
  95
  96         flash@0 {
  97                 compatible = "jedec,spi-nor";
  98                 reg = <0>;
  99                 spi-max-frequency = <25000000>;
 100
 101                 partitions {
 102                         compatible = "fixed-partitions";
 103                         #address-cells = <1>;
 104                         #size-cells = <1>;
 105
 106                         partition@0 {
 107                                 label = "u-boot";
 108                                 reg = <0x000000 0x040000>;
 109                                 read-only;
 110                         };
 111
 112                         partition@40000 {
 113                                 label = "u-boot-env";
 114                                 reg = <0x040000 0x010000>;
 115                                 read-only;
 116                         };
 117
 118                         art: partition@50000 {
 119                                 label = "art";
 120                                 reg = <0x050000 0x010000>;
 121                                 read-only;
 122                         };
 123
 124                         partition@60000 {
 125                                 compatible = "denx,uimage";
 126                                 label = "firmware";
 127                                 reg = <0x060000 0xfa0000>;
 128                         };
 129                 };
 130         };
 131 };
 132
 133 &eth0 {
 134         status = "okay";
 135         mtd-mac-address = <&art 0x0>;
 136         phy-handle = <&swphy4>;
 137 };
 138
 139 &eth1 {
 140         mtd-mac-address = <&art 0x0>;
 141         mtd-mac-address-increment = <1>;
 142 };
 143
 144 &wmac {
 145         status = "okay";
 146         mtd-cal-data = <&art 0x1000>;
 147 };