target/linux/ath79/dts/qca9531_tplink_tl-wr902ac-v1.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "qca953x.dtsi"
   8
   9 / {
  10         compatible = "tplink,tl-wr902ac-v1", "qca,qca9531";
  11         model = "TP-Link TL-WR902AC v1";
  12
  13         aliases {
  14                 led-boot = &led_power;
  15                 led-failsafe = &led_power;
  16                 led-running = &led_power;
  17                 led-upgrade = &led_power;
  18                 label-mac-device = &wmac;
  19         };
  20
  21         leds {
  22                 compatible = "gpio-leds";
  23
  24                 led_power: power {
  25                         label = "tp-link:green:power";
  26                         gpios = <&gpio 13 GPIO_ACTIVE_HIGH>;
  27                         default-state = "on";
  28                 };
  29
  30                 internet {
  31                         label = "tp-link:green:internet";
  32                         gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
  33                 };
  34
  35                 wlan2g {
  36                         label = "tp-link:green:wlan2g";
  37                         gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
  38                         linux,default-trigger = "phy0tpt";
  39                 };
  40
  41                 usb {
  42                         label = "tp-link:green:usb";
  43                         gpios = <&gpio 4 GPIO_ACTIVE_HIGH>;
  44                         trigger-sources = <&hub_port0>;
  45                         linux,default-trigger = "usbport";
  46                 };
  47
  48                 wps {
  49                         label = "tp-link:green:wps";
  50                         gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
  51                 };
  52
  53                 lan {
  54                         label = "tp-link:green:lan";
  55                         gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
  56                 };
  57         };
  58
  59         keys {
  60                 compatible = "gpio-keys";
  61
  62                 reset {
  63                         label = "Reset button";
  64                         linux,code = <KEY_RESTART>;
  65                         gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
  66                 };
  67
  68                 wps {
  69                         label = "WPS button";
  70                         linux,code = <KEY_WPS_BUTTON>;
  71                         gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
  72                 };
  73
  74                 sw1 {
  75                         label = "Mode switch 1";
  76                         linux,input-type = <EV_SW>;
  77                         linux,code = <BTN_0>;
  78                         gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
  79                 };
  80
  81                 sw2 {
  82                         label = "Mode switch 2";
  83                         linux,input-type = <EV_SW>;
  84                         linux,code = <BTN_1>;
  85                         gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
  86                 };
  87         };
  88
  89         gpio-export {
  90                 compatible = "gpio-export";
  91
  92                 gpio_usb_power {
  93                         gpio-export,name = "tp-link:power:usb";
  94                         gpio-export,output = <1>;
  95                         gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
  96                 };
  97         };
  98 };
  99
 100 &uart {
 101         status = "okay";
 102 };
 103
 104 &spi {
 105         status = "okay";
 106
 107         flash@0 {
 108                 compatible = "jedec,spi-nor";
 109                 reg = <0>;
 110                 spi-max-frequency = <25000000>;
 111
 112                 partitions {
 113                         compatible = "fixed-partitions";
 114                         #address-cells = <1>;
 115                         #size-cells = <1>;
 116
 117                         partition@0 {
 118                                 label = "u-boot";
 119                                 reg = <0x000000 0x020000>;
 120                                 read-only;
 121                         };
 122
 123                         partition@20000 {
 124                                 compatible = "tplink,firmware";
 125                                 label = "firmware";
 126                                 reg = <0x020000 0x730000>;
 127                         };
 128
 129                         tplink: partition@750000 {
 130                                 label = "tplink";
 131                                 reg = <0x750000 0x0a0000>;
 132                                 read-only;
 133                         };
 134
 135                         art: partition@7f0000 {
 136                                 label = "art";
 137                                 reg = <0x7f0000 0x010000>;
 138                                 read-only;
 139                         };
 140                 };
 141         };
 142 };
 143
 144 &eth0 {
 145         status = "okay";
 146
 147         phy-handle = <&swphy4>;
 148
 149         mtd-mac-address = <&tplink 0x8>;
 150         mtd-mac-address-increment = <1>;
 151 };
 152
 153 &eth1 {
 154         compatible = "syscon", "simple-mfd";
 155 };
 156
 157 &wmac {
 158         status = "okay";
 159
 160         mtd-cal-data = <&art 0x1000>;
 161         mtd-mac-address = <&tplink 0x8>;
 162 };
 163
 164 &pcie0 {
 165         status = "okay";
 166
 167         wifi@0,0 {
 168                 compatible = "pci168c,0050";
 169                 reg = <0x0000 0 0 0 0>;
 170         };
 171 };
 172
 173 &usb_phy {
 174         status = "okay";
 175 };
 176
 177 &usb0 {
 178         #address-cells = <1>;
 179         #size-cells = <0>;
 180         status = "okay";
 181
 182         hub_port0: port@1 {
 183                 reg = <1>;
 184                 #trigger-source-cells = <0>;
 185         };
 186 };