ee1f904491a3c38ba439c3a0c0cd96a24e5383a5
[openwrt/staging/dedeckeh.git] / target / linux / ath79 / dts / qca9533_tplink_cpe210.dtsi
1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
2 /dts-v1/;
3
4 #include <dt-bindings/gpio/gpio.h>
5 #include <dt-bindings/input/input.h>
6
7 #include "qca953x.dtsi"
8
9 / {
10 chosen {
11 bootargs = "console=ttyS0,115200n8";
12 };
13
14 aliases {
15 led-boot = &system;
16 led-failsafe = &system;
17 led-running = &system;
18 led-upgrade = &system;
19 };
20
21 leds {
22 compatible = "gpio-leds";
23
24 lan {
25 label = "tp-link:green:lan";
26 gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
27 };
28
29 link1 {
30 label = "tp-link:green:link1";
31 gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
32 };
33
34 link2 {
35 label = "tp-link:green:link2";
36 gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
37 };
38
39 link3 {
40 label = "tp-link:green:link3";
41 gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
42 };
43
44 system: link4 {
45 label = "tp-link:green:link4";
46 gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
47 };
48 };
49
50 };
51
52 &uart {
53 status = "okay";
54 };
55
56 &spi {
57 status = "okay";
58 num-cs = <1>;
59
60 flash@0 {
61 #address-cells = <1>;
62 #size-cells = <1>;
63 compatible = "jedec,spi-nor";
64 reg = <0>;
65 spi-max-frequency = <25000000>;
66
67 partitions {
68 compatible = "fixed-partitions";
69 #address-cells = <1>;
70 #size-cells = <1>;
71
72 uboot: partition@0 {
73 label = "u-boot";
74 reg = <0x000000 0x020000>;
75 read-only;
76 };
77
78 partition@20000 {
79 label = "partition-table";
80 reg = <0x020000 0x10000>;
81 read-only;
82 };
83
84 info: partition@30000 {
85 label = "product-info";
86 reg = <0x030000 0x10000>;
87 read-only;
88 };
89
90 partition@40000 {
91 label = "firmware";
92 reg = <0x040000 0x780000>;
93 compatible = "tplink,firmware";
94 };
95
96 config: partition@7c0000 {
97 label = "config";
98 reg = <0x7c0000 0x30000>;
99 read-only;
100 };
101
102 ART: partition@7f0000 {
103 label = "ART";
104 reg = <0x7f0000 0x10000>;
105 read-only;
106 };
107 };
108 };
109 };
110
111 &eth0 {
112 status = "okay";
113 phy-handle = <&swphy4>;
114 mtd-mac-address = <&info 0x8>;
115 };
116
117 &eth1 {
118 compatible = "syscon", "simple-mfd";
119 };
120
121 &wmac {
122 status = "okay";
123 mtd-cal-data = <&ART 0x1000>;
124 mtd-mac-address = <&info 0x8>;
125 };