target/linux/ath79/dts/qca9533_tplink_tl-wa850re-v2.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "qca953x.dtsi"
   8
   9 / {
  10         compatible = "tplink,tl-wa850re-v2", "qca,qca9533";
  11         model = "TP-Link TL-WA850RE v2";
  12
  13         aliases {
  14                 led-boot = &led_re;
  15                 led-failsafe = &led_re;
  16                 led-running = &led_re;
  17                 led-upgrade = &led_re;
  18                 label-mac-device = &wmac;
  19         };
  20
  21         leds {
  22                 compatible = "gpio-leds";
  23
  24                 pinctrl-names = "default";
  25                 pinctrl-0 = <&jtag_disable_pins>;
  26
  27                 lan {
  28                         label = "tp-link:blue:lan";
  29                         gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
  30                 };
  31
  32                 led_re: re {
  33                         label = "tp-link:blue:re";
  34                         gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
  35                 };
  36
  37                 signal1 {
  38                         label = "tp-link:blue:signal1";
  39                         gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
  40                 };
  41
  42                 signal2 {
  43                         label = "tp-link:blue:signal2";
  44                         gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
  45                 };
  46
  47                 signal3 {
  48                         label = "tp-link:blue:signal3";
  49                         gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
  50                 };
  51
  52                 signal4 {
  53                         label = "tp-link:blue:signal4";
  54                         gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
  55                 };
  56
  57                 led_signal5: signal5 {
  58                         label = "tp-link:blue:signal5";
  59                         gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
  60                 };
  61
  62                 wlan {
  63                         label = "tp-link:blue:wlan";
  64                         gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
  65                         linux,default-trigger = "phy0tpt";
  66                 };
  67         };
  68
  69         keys {
  70                 compatible = "gpio-keys";
  71
  72                 reset {
  73                         label = "Reset button";
  74                         linux,code = <KEY_RESTART>;
  75                         gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
  76                 };
  77
  78                 wps {
  79                         label = "WPS button";
  80                         linux,code = <KEY_RFKILL>;
  81                         gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
  82                 };
  83         };
  84 };
  85
  86 &gpio {
  87         led_enable {
  88                 gpio-hog;
  89                 gpios = <15 GPIO_ACTIVE_HIGH>;
  90                 line-name = "tp-link:power:led";
  91                 output-high;
  92         };
  93 };
  94
  95 &uart {
  96         status = "okay";
  97 };
  98
  99 &spi {
 100         status = "okay";
 101
 102         num-cs = <1>;
 103
 104         flash@0 {
 105                 #address-cells = <1>;
 106                 #size-cells = <1>;
 107                 compatible = "jedec,spi-nor";
 108                 reg = <0>;
 109                 spi-max-frequency = <25000000>;
 110
 111                 partitions {
 112                         compatible = "fixed-partitions";
 113                         #address-cells = <1>;
 114                         #size-cells = <1>;
 115
 116                         partition@0 {
 117                                 label = "u-boot";
 118                                 reg = <0x000000 0x020000>;
 119                                 read-only;
 120                         };
 121
 122                         partition@20000 {
 123                                 label = "firmware";
 124                                 reg = <0x020000 0x390000>;
 125                                 compatible = "tplink,firmware";
 126                         };
 127
 128                         config: partition@3b0000 {
 129                                 label = "config";
 130                                 reg = <0x3b0000 0x040000>;
 131                                 read-only;
 132                         };
 133
 134                         art: partition@3f0000 {
 135                                 label = "art";
 136                                 reg = <0x3f0000 0x010000>;
 137                                 read-only;
 138                         };
 139                 };
 140         };
 141 };
 142
 143 &wmac {
 144         status = "okay";
 145
 146         mtd-cal-data = <&art 0x1000>;
 147         mtd-mac-address = <&config 0x10008>;
 148 };
 149
 150 &eth0 {
 151         status = "okay";
 152
 153         phy-handle = <&swphy4>;
 154
 155         mtd-mac-address = <&config 0x10008>;
 156 };
 157
 158 &eth1 {
 159         compatible = "syscon", "simple-mfd";
 160 };