target/linux/ath79/dts/qca9556_avm_fritz-repeater.dtsi

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "qca955x.dtsi"
   8
   9 / {
  10         keys {
  11                 compatible = "gpio-keys";
  12
  13                 wps {
  14                         label = "wps";
  15                         linux,code = <KEY_WPS_BUTTON>;
  16                         gpios = <&gpio 4 GPIO_ACTIVE_HIGH>;
  17                 };
  18         };
  19 };
  20
  21 &uart {
  22         status = "okay";
  23 };
  24
  25 &spi {
  26         status = "okay";
  27         num-cs = <1>;
  28
  29         flash@0 {
  30                 compatible = "jedec,spi-nor";
  31                 reg = <0>;
  32                 spi-max-frequency = <25000000>;
  33
  34                 partitions {
  35                         compatible = "fixed-partitions";
  36                         #address-cells = <1>;
  37                         #size-cells = <1>;
  38
  39                         partition@0 {
  40                                 label = "urlader";
  41                                 reg = <0x0 0x20000>;
  42                                 read-only;
  43                         };
  44
  45                         partition@20000 {
  46                                 compatible = "avm,eva-firmware";
  47                                 label = "firmware";
  48                                 reg = <0x20000 0xee0000>;
  49                         };
  50
  51                         partition@f00000 {
  52                                 label = "tffs (1)";
  53                                 reg = <0xf00000 0x80000>;
  54                                 read-only;
  55                         };
  56
  57                         partition@f80000 {
  58                                 label = "tffs (2)";
  59                                 reg = <0xf80000 0x80000>;
  60                                 read-only;
  61                         };
  62                 };
  63         };
  64 };
  65
  66 &wmac {
  67         status = "okay";
  68         qca,no-eeprom;
  69 };
  70
  71 &eth1 {
  72         status = "okay";
  73
  74         phy-handle = <&phy0>;
  75         pll-data = <0x3000000 0x101 0x1313>;
  76
  77         qca955x-sgmii-fixup;
  78
  79         gmac-config {
  80                 device = <&gmac>;
  81                 ge0-sgmii = <0>;
  82         };
  83 };
  84
  85 &mdio1 {
  86         status = "okay";
  87
  88         phy0: ethernet-phy@0 {
  89                 reg = <0>;
  90                 at803x-override-sgmii-link-check;
  91         };
  92 };