target/linux/ath79/dts/qca9557_iodata_wn-ac-dgr.dtsi

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2
   3 #include <dt-bindings/gpio/gpio.h>
   4 #include <dt-bindings/input/input.h>
   5
   6 #include "qca955x.dtsi"
   7
   8 / {
   9         aliases {
  10                 led-boot = &led_power;
  11                 led-failsafe = &led_power;
  12                 led-running = &led_power;
  13                 led-upgrade = &led_power;
  14         };
  15
  16         leds: leds {
  17                 compatible = "gpio-leds";
  18
  19                 led_power: power {
  20                         label = "iodata:green:power";
  21                         gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
  22                         default-state = "on";
  23                 };
  24
  25                 eco {
  26                         label = "iodata:green:eco";
  27                         gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
  28                 };
  29
  30                 wlan5g {
  31                         label = "iodata:green:wlan5g";
  32                         gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
  33                         linux,default-trigger = "phy0tpt";
  34                 };
  35
  36                 wlan2g {
  37                         label = "iodata:green:wlan2g";
  38                         gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
  39                         linux,default-trigger = "phy1tpt";
  40                 };
  41
  42                 notification {
  43                         label = "iodata:amber:notification";
  44                         gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
  45                 };
  46         };
  47
  48         keys: keys {
  49                 compatible = "gpio-keys";
  50
  51                 eco {
  52                         label = "eco";
  53                         gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
  54                         linux,code = <BTN_1>;
  55                         debounce-interval = <60>;
  56                 };
  57
  58                 auto {
  59                         label = "auto";
  60                         gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
  61                         linux,code = <BTN_0>;
  62                         linux,input-type = <EV_SW>;
  63                         debounce-interval = <60>;
  64                 };
  65
  66                 wps {
  67                         label = "wps";
  68                         gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
  69                         linux,code = <KEY_WPS_BUTTON>;
  70                         debounce-interval = <60>;
  71                 };
  72
  73                 reset {
  74                         label = "reset";
  75                         gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
  76                         linux,code = <KEY_RESTART>;
  77                         debounce-interval = <60>;
  78                 };
  79
  80                 router {
  81                         label = "router";
  82                         gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
  83                         linux,code = <BTN_0>;
  84                         linux,input-type = <EV_SW>;
  85                         debounce-interval = <60>;
  86                 };
  87         };
  88 };
  89
  90 &spi {
  91         status = "okay";
  92
  93         num-cs = <1>;
  94
  95         flash@0 {
  96                 compatible = "jedec,spi-nor";
  97                 reg = <0>;
  98                 spi-max-frequency = <25000000>;
  99
 100                 partitions {
 101                         compatible = "fixed-partitions";
 102                         #address-cells = <1>;
 103                         #size-cells = <1>;
 104
 105                         partition@0 {
 106                                 label = "u-boot";
 107                                 reg = <0x000000 0x030000>;
 108                                 read-only;
 109                         };
 110
 111                         partition@30000 {
 112                                 label = "u-boot-env";
 113                                 reg = <0x030000 0x010000>;
 114                                 read-only;
 115                         };
 116
 117                         partition@40000 {
 118                                 compatible = "denx,uimage";
 119                                 label = "firmware";
 120                                 reg = <0x040000 0xe50000>;
 121                         };
 122
 123                         partition@e90000 {
 124                                 label = "manufacture";
 125                                 reg = <0xe90000 0x100000>;
 126                                 read-only;
 127                         };
 128
 129                         partition@f90000 {
 130                                 label = "backup";
 131                                 reg = <0xf90000 0x010000>;
 132                                 read-only;
 133                         };
 134
 135                         partition@fa0000 {
 136                                 label = "storage";
 137                                 reg = <0xfa0000 0x050000>;
 138                                 read-only;
 139                         };
 140
 141                         art: partition@ff0000 {
 142                                 label = "art";
 143                                 reg = <0xff0000 0x010000>;
 144                                 read-only;
 145                         };
 146                 };
 147         };
 148 };
 149
 150 &mdio0 {
 151         status = "okay";
 152
 153         phy0: ethernet-phy@0 {
 154                 reg = <0>;
 155
 156                 qca,ar8327-initvals = <
 157                         0x04 0x87600000 /* PORT0 PAD MODE CTRL */
 158                         0x7c 0x0000007e /* PORT0_STATUS */
 159                 >;
 160         };
 161 };
 162
 163 &eth0 {
 164         status = "okay";
 165
 166         pll-data = <0xa6000000 0x00000101 0x00001616>;
 167         phy-handle = <&phy0>;
 168 };
 169
 170 &pcie1 {
 171         status = "okay";
 172
 173         wifi@0,0 {
 174                 compatible = "pci168c,003c";
 175                 reg = <0x0000 0 0 0 0>;
 176         };
 177 };
 178
 179 &uart {
 180         status = "okay";
 181 };
 182
 183 &usb_phy0 {
 184         status = "okay";
 185 };
 186
 187 &usb0 {
 188         status = "okay";
 189 };
 190
 191 &wmac {
 192         status = "okay";
 193
 194         qca,no-eeprom;
 195 };