target/linux/ath79/dts/qca9558_dlink_dap-2695-a1.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "qca955x.dtsi"
   8
   9 / {
  10         compatible = "dlink,dap-2695-a1", "qca,qca9558";
  11         model = "D-link DAP-2695-A1";
  12
  13         aliases {
  14                 led-boot = &led_power_red;
  15                 led-failsafe = &led_power_red;
  16                 led-running = &led_power_green;
  17                 led-upgrade = &led_power_red;
  18         };
  19
  20         leds {
  21                 compatible = "gpio-leds";
  22
  23                 led_power_green: power_green {
  24                         label = "d-link:green:power";
  25                         gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
  26                         default-state = "on";
  27                 };
  28
  29                 led_power_red: power_red {
  30                         label = "d-link:red:power";
  31                         gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
  32                 };
  33
  34                 wifi2g {
  35                         label = "d-link:green:wifi2g";
  36                         gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
  37                         linux,default-trigger = "phy1tpt";
  38                 };
  39         };
  40
  41         keys {
  42                 compatible = "gpio-keys";
  43
  44                 reset {
  45                         label = "reset";
  46                         linux,code = <KEY_RESTART>;
  47                         gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
  48                 };
  49         };
  50 };
  51
  52 &spi {
  53         status = "okay";
  54         num-cs = <1>;
  55
  56         flash@0 {
  57                 #address-cells = <1>;
  58                 #size-cells = <1>;
  59                 compatible = "mx25l12805d";
  60                 reg = <0>;
  61                 spi-max-frequency = <25000000>;
  62
  63                 partitions {
  64                         compatible = "fixed-partitions";
  65                         #address-cells = <1>;
  66                         #size-cells = <1>;
  67
  68                         partition@0 {
  69                                 label = "u-boot";
  70                                 reg = <0x000000 0x040000>;
  71                                 read-only;
  72                         };
  73
  74                         partition@40000 {
  75                                 label = "bdcfg";
  76                                 reg = <0x040000 0x010000>;
  77                                 read-only;
  78                         };
  79
  80                         partition@50000 {
  81                                 label = "rgdb";
  82                                 reg = <0x050000 0x010000>;
  83                                 read-only;
  84                         };
  85
  86                         partition@60000 {
  87                                 label = "langpack";
  88                                 reg = <0x060000 0x010000>;
  89                                 read-only;
  90                         };
  91
  92                         partition@70000 {
  93                                 compatible = "wrg";
  94                                 label = "firmware";
  95                                 reg = <0x070000 0xf00000>;
  96                         };
  97
  98                         partition@f70000 {
  99                                 label = "captival";
 100                                 reg = <0xf70000 0x070000>;
 101                                 read-only;
 102                         };
 103
 104                         partition@fe0000 {
 105                                 label = "certificate";
 106                                 reg = <0xfe0000 0x010000>;
 107                                 read-only;
 108                         };
 109
 110                         art: partition@ff0000 {
 111                                 label = "art";
 112                                 reg = <0xff0000 0x010000>;
 113                                 read-only;
 114                         };
 115                 };
 116         };
 117 };
 118
 119 &mdio0 {
 120         status = "okay";
 121
 122         phy0: ethernet-phy@0 {
 123                 reg = <0>;
 124
 125                 qca,ar8327-initvals = <
 126                         0x04 0x07600000 /* PORT0_PAD_CTRL */
 127                         0x0c 0x00080080 /* PORT6_PAD_CTRL */
 128                         0x7c 0x0000007e /* PORT0_STATUS */
 129                         0x94 0x0000007e /* PORT6_STATUS */
 130                 >;
 131         };
 132 };
 133
 134 &eth0 {
 135         status = "okay";
 136
 137         phy-handle = <&phy0>;
 138         phy-mode = "rgmii";
 139         pll-data = <0x56000000 0x00000101 0x00001616>;
 140
 141         fixed-link {
 142                 speed = <1000>;
 143                 full-duplex;
 144         };
 145 };
 146
 147 &eth1 {
 148         status = "okay";
 149
 150         phy-mask = <0>;
 151         phy-mode = "sgmii";
 152         pll-data = <0x03000101 0x00000101 0x00001616>;
 153
 154         fixed-link {
 155                 speed = <1000>;
 156                 full-duplex;
 157         };
 158 };
 159
 160 &pcie0 {
 161         status = "okay";
 162 };
 163
 164 &uart {
 165         status = "okay";
 166 };
 167
 168 &wmac {
 169         status = "okay";
 170
 171         qca,no-eeprom;
 172 };