target/linux/ath79/dts/qca9558_domywifi_dw33d.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "qca955x.dtsi"
   8
   9 / {
  10         compatible = "domywifi,dw33d", "qca,qca9558";
  11         model = "DomyWifi DW33D";
  12
  13         aliases {
  14                 led-boot = &led_system;
  15                 led-failsafe = &led_system;
  16                 led-running = &led_system;
  17                 led-upgrade = &led_system;
  18         };
  19
  20         leds {
  21                 compatible = "gpio-leds";
  22
  23                 led_system: system {
  24                         label = "dw33d:blue:system";
  25                         gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
  26                 };
  27
  28                 mmc {
  29                         label = "dw33d:blue:mmc";
  30                         gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
  31                         trigger-sources = <&hub_port0>;
  32                         linux,default-trigger = "usbport";
  33                 };
  34
  35                 usb {
  36                         label = "dw33d:blue:usb";
  37                         gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
  38                         trigger-sources = <&hub_port1>;
  39                         linux,default-trigger = "usbport";
  40                 };
  41
  42                 wlan2g {
  43                         label = "dw33d:blue:wlan2g";
  44                         gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
  45                         linux,default-trigger = "phy1tpt";
  46                 };
  47
  48                 internet {
  49                         label = "dw33d:blue:internet";
  50                         gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
  51                 };
  52         };
  53
  54         keys {
  55                 compatible = "gpio-keys";
  56
  57                 reset {
  58                         label = "Reset button";
  59                         linux,code = <KEY_RESTART>;
  60                         gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
  61                         debounce-interval = <60>;
  62                 };
  63         };
  64 };
  65
  66 &pcie0 {
  67         status = "okay";
  68
  69         wifi@0,0 {
  70                 compatible = "qcom,ath10k";
  71                 reg = <0 0 0 0 0>;
  72         };
  73 };
  74
  75 &uart {
  76         status = "okay";
  77 };
  78
  79 &usb_phy0 {
  80         status = "okay";
  81 };
  82
  83 &usb0 {
  84         #address-cells = <1>;
  85         #size-cells = <0>;
  86         status = "okay";
  87
  88         hub_port0: port@1 {
  89                 reg = <1>;
  90                 #trigger-source-cells = <0>;
  91         };
  92 };
  93
  94 &usb_phy1 {
  95         status = "okay";
  96 };
  97
  98 &usb1 {
  99         #address-cells = <1>;
 100         #size-cells = <0>;
 101         status = "okay";
 102
 103         hub_port1: port@1 {
 104                 reg = <1>;
 105                 #trigger-source-cells = <0>;
 106         };
 107 };
 108
 109 &spi {
 110         status = "okay";
 111
 112         num-cs = <1>;
 113
 114         flash@0 {
 115                 compatible = "jedec,spi-nor";
 116                 reg = <0>;
 117                 spi-max-frequency = <25000000>;
 118
 119                 partitions {
 120                         compatible = "fixed-partitions";
 121                         #address-cells = <1>;
 122                         #size-cells = <1>;
 123
 124                         partition@0 {
 125                                 label = "u-boot";
 126                                 reg = <0x0 0x40000>;
 127                                 read-only;
 128                         };
 129
 130                         partition@40000 {
 131                                 label = "u-boot-env";
 132                                 reg = <0x40000 0x10000>;
 133                         };
 134
 135                         partition@50000 {
 136                                 label = "oem-firmware";
 137                                 reg = <0x50000 0xfa0000>;
 138                         };
 139
 140                         art: partition@ff0000 {
 141                                 label = "art";
 142                                 reg = <0xff0000 0x10000>;
 143                                 read-only;
 144                         };
 145                 };
 146         };
 147 };
 148
 149 &nand {
 150         status = "okay";
 151
 152         partitions {
 153                 compatible = "fixed-partitions";
 154                 #address-cells = <1>;
 155                 #size-cells = <1>;
 156
 157                 partition@0 {
 158                         label = "kernel";
 159                         reg = <0x0 0x500000>;
 160                 };
 161
 162                 partition@500000 {
 163                         label = "ubi";
 164                         reg = <0x500000 0x5b00000>;
 165                 };
 166
 167                 partition@6000000 {
 168                         label = "oem-backup";
 169                         reg = <0x6000000 0x2000000>;
 170                 };
 171         };
 172 };
 173
 174 &mdio0 {
 175         status = "okay";
 176
 177         phy0: ethernet-phy@0 {
 178                 reg = <0>;
 179
 180                 qca,ar8327-initvals = <
 181                         0x04 0x87600000 /* PORT0 PAD MODE CTRL */
 182                         0x0c 0x00080080 /* PORT6 PAD MODE CTRL */
 183                         0x7c 0x0000007e /* PORT0_STATUS */
 184                         0x94 0x0000007e /* PORT6 STATUS */
 185                         >;
 186         };
 187 };
 188
 189 &eth0 {
 190         status = "okay";
 191
 192         mtd-mac-address = <&art 0x0>;
 193         pll-data = <0x56000000 0x00000101 0x00001616>;
 194         phy-handle = <&phy0>;
 195 };
 196
 197 &eth1 {
 198         status = "okay";
 199
 200         mtd-mac-address = <&art 0x6>;
 201         pll-data = <0x03000101 0x00000101 0x00001616>;
 202         fixed-link {
 203                 speed = <1000>;
 204                 full-duplex;
 205         };
 206 };
 207
 208 &wmac {
 209         status = "okay";
 210
 211         mtd-cal-data = <&art 0x1000>;
 212         mtd-mac-address = <&art 0xc>;
 213 };