target/linux/ath79/dts/qca9558_engenius_ecb1750.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "qca955x.dtsi"
   8
   9 / {
  10         compatible = "engenius,ecb1750", "qca,qca9558";
  11         model = "EnGenius ECB1750";
  12
  13         aliases {
  14                 led-boot = &led_power_orange;
  15                 led-failsafe = &led_power_orange;
  16                 led-running = &led_power_orange;
  17                 led-upgrade = &led_power_orange;
  18         };
  19
  20         leds {
  21                 compatible = "gpio-leds";
  22
  23                 led_power_orange: power_orange {
  24                         label = "ecb1750:orange:power";
  25                         gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
  26                         default-state = "on";
  27                 };
  28
  29                 wlan2g {
  30                         label = "ecb1750:blue:wlan2g";
  31                         gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
  32                         linux,default-trigger = "phy1tpt";
  33                 };
  34
  35                 wlan5g {
  36                         label = "ecb1750:blue:wlan5g";
  37                         gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
  38                         linux,default-trigger = "phy0tpt";
  39                 };
  40
  41                 lan {
  42                         label = "ecb1750:blue:lan";
  43                         gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
  44                 };
  45         };
  46
  47         keys {
  48                 compatible = "gpio-keys";
  49
  50                 reset {
  51                         label = "reset";
  52                         linux,code = <KEY_RESTART>;
  53                         gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
  54                 };
  55         };
  56 };
  57
  58 &pcie0 {
  59         status = "okay";
  60 };
  61
  62 &uart {
  63         status = "okay";
  64 };
  65
  66 &spi {
  67         status = "okay";
  68
  69         num-cs = <1>;
  70
  71         flash@0 {
  72                 compatible = "jedec,spi-nor";
  73                 reg = <0>;
  74                 spi-max-frequency = <25000000>;
  75
  76                 partitions {
  77                         compatible = "fixed-partitions";
  78                         #address-cells = <1>;
  79                         #size-cells = <1>;
  80
  81                         uboot: partition@0 {
  82                                 label = "u-boot";
  83                                 reg = <0x000000 0x040000>;
  84                                 read-only;
  85                         };
  86
  87                         partition@40000 {
  88                                 label = "u-boot-env";
  89                                 reg = <0x040000 0x010000>;
  90                         };
  91
  92                         partition@50000 {
  93                                 compatible = "denx,uimage";
  94                                 label = "firmware";
  95                                 reg = <0x050000 0xf50000>;
  96                         };
  97
  98                         partition@fa0000 {
  99                                 label = "userconfig";
 100                                 reg = <0xfa0000 0x050000>;
 101                                 read-only;
 102                         };
 103
 104                         art: partition@ff0000 {
 105                                 label = "art";
 106                                 reg = <0xff0000 0x010000>;
 107                                 read-only;
 108                         };
 109                 };
 110         };
 111 };
 112
 113 &wmac {
 114         status = "okay";
 115
 116         qca,no-eeprom;
 117 };
 118
 119 &mdio0 {
 120         status = "okay";
 121
 122         phy5: ethernet-phy@5 {
 123                 reg = <5>;
 124                 eee-broken-100tx;
 125                 eee-broken-1000t;
 126         };
 127 };
 128
 129 &eth0 {
 130         status = "okay";
 131
 132         pll-data = <0x9a000000 0x80000101 0x80001313>;
 133
 134         phy-handle = <&phy5>;
 135         phy-mode = "rgmii";
 136
 137         gmac-config {
 138                 device = <&gmac>;
 139                 rgmii-gmac0 = <1>;
 140                 rxd-delay = <3>;
 141                 rxdv-delay = <3>;
 142         };
 143 };