target/linux/ath79/dts/qca9558_openmesh_om5p-ac-v2.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "qca9557.dtsi"
   8
   9 / {
  10         compatible = "openmesh,om5p-ac-v2", "qca,qca9557";
  11         model = "OpenMesh OM5P-AC V2";
  12
  13         memory@0 {
  14                 device_type = "memory";
  15                 reg = <0x0 0x8000000>;
  16         };
  17
  18         extosc: ref {
  19                 compatible = "fixed-clock";
  20                 #clock-cells = <0>;
  21                 clock-output-names = "ref";
  22                 clock-frequency = <40000000>;
  23         };
  24
  25         leds {
  26                 compatible = "gpio-leds";
  27
  28                 power {
  29                         label = "om5pac:blue:power";
  30                         gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
  31                         default-state = "off";
  32                 };
  33
  34                 wifi_green {
  35                         label = "om5pac:green:wifi";
  36                         gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
  37                         default-state = "off";
  38                 };
  39
  40                 wifi_yellow {
  41                         label = "om5pac:yellow:wifi";
  42                         gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
  43                         default-state = "off";
  44                 };
  45
  46                 wifi_red {
  47                         label = "om5pac:red:wifi";
  48                         gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
  49                         default-state = "off";
  50                 };
  51         };
  52
  53         keys {
  54                 compatible = "gpio-keys-polled";
  55                 #address-cells = <1>;
  56                 #size-cells = <0>;
  57                 poll-interval = <100>;
  58
  59                 button@0 {
  60                         label = "reset";
  61                         linux,code = <KEY_RESTART>;
  62                         gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
  63                 };
  64         };
  65
  66         gpio-export {
  67                 compatible = "gpio-export";
  68                 #size-cells = <0>;
  69
  70                 gpio_pa_dcdc {
  71                         gpio-export,name = "om5pac:pa_dcdc";
  72                         gpio-export,output = <1>;
  73                         gpios = <&gpio 2 GPIO_ACTIVE_HIGH>;
  74                 };
  75                 gpio_pa_high {
  76                         gpio-export,name = "om5pac:pa_high";
  77                         gpio-export,output = <1>;
  78                         gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
  79                 };
  80         };
  81 };
  82
  83 &pinmux {
  84         pinmux_pa_dcdc_pins {
  85                 pinctrl-single,bits = <0x0 0xff00 0x0>;
  86         };
  87
  88         pinmux_pa_high_pins {
  89                 pinctrl-single,bits = <0x10 0xff 0x0>;
  90         };
  91 };
  92
  93 &pcie0 {
  94         status = "okay";
  95 };
  96
  97 &uart {
  98         status = "okay";
  99 };
 100
 101 &pll {
 102         clocks = <&extosc>;
 103 };
 104
 105 &spi {
 106         status = "okay";
 107         num-cs = <1>;
 108
 109         flash@0 {
 110                 #address-cells = <1>;
 111                 #size-cells = <1>;
 112                 compatible = "mx25l12805d";
 113                 reg = <0>;
 114                 spi-max-frequency = <25000000>;
 115
 116                 partitions {
 117                         compatible = "fixed-partitions";
 118                         #address-cells = <1>;
 119                         #size-cells = <1>;
 120
 121                         partition@0 {
 122                                 label = "u-boot";
 123                                 reg = <0x000000 0x040000>;
 124                                 read-only;
 125                         };
 126
 127                         partition@1 {
 128                                 label = "u-boot-env";
 129                                 reg = <0x040000 0x010000>;
 130                         };
 131
 132                         partition@2 {
 133                                 label = "firmware";
 134                                 reg = <0x850000 0x7a0000>;
 135                         };
 136
 137                         partition@3 {
 138                                 label = "ART";
 139                                 reg = <0xff0000 0x010000>;
 140                                 read-only;
 141                         };
 142                 };
 143         };
 144 };
 145
 146 &mdio0 {
 147         status = "okay";
 148
 149         phy4: ethernet-phy@4 {
 150                 reg = <4>;
 151                 phy-mode = "rgmii-id";
 152         };
 153 };
 154
 155 &mdio1 {
 156         status = "okay";
 157
 158         phy1: ethernet-phy@1 {
 159                 reg = <1>;
 160                 phy-mode = "sgmii";
 161         };
 162 };
 163
 164 &eth0 {
 165         status = "okay";
 166
 167         phy-handle = <&phy4>;
 168         phy-mode = "rgmii";
 169 };
 170
 171 &eth1 {
 172         status = "okay";
 173
 174         phy-handle = <&phy1>;
 175         phy-mode = "sgmii";
 176 };