target/linux/ath79/dts/qca9558_sitecom_wlr-8100.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "qca955x.dtsi"
   8
   9 / {
  10         model = "Sitecom WLR-8100 (X8 AC1750)";
  11         compatible = "sitecom,wlr-8100", "qca,qca9558";
  12
  13         aliases {
  14                 led-boot = &led_status_amber;
  15                 led-failsafe = &led_status_amber;
  16                 led-running = &led_status_amber;
  17                 led-upgrade = &led_status_amber;
  18         };
  19
  20         keys {
  21                 compatible = "gpio-keys";
  22
  23                 wifi2g_rfkill {
  24                         label = "2.4GHz - RFKILL";
  25                         gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
  26                         linux,code = <KEY_RFKILL>;
  27                 };
  28
  29                 wifi5g_restart {
  30                         label = "5GHz - RESTART";
  31                         gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
  32                         linux,code = <KEY_RESTART>;
  33                 };
  34         };
  35
  36         leds {
  37                 compatible = "gpio-leds";
  38
  39                 led_status_amber: status_amber {
  40                         label = "wlr-8100:amber:status";
  41                         gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
  42                         default-state = "on";
  43                 };
  44
  45                 ops {
  46                         label = "wlr-8100:white:ops";
  47                         gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
  48                 };
  49
  50                 wifi2g {
  51                         label = "wlr-8100:blue:wifi2g";
  52                         gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
  53                         linux,default-trigger = "phy1tpt";
  54                 };
  55
  56                 wifi5g {
  57                         label = "wlr-8100:blue:wifi5g";
  58                         gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
  59                         linux,default-trigger = "phy0tpt";
  60                 };
  61         };
  62 };
  63
  64 &spi {
  65         status = "okay";
  66
  67         num-cs = <1>;
  68
  69         flash@0 {
  70                 compatible = "jedec,spi-nor";
  71                 reg = <0>;
  72                 spi-max-frequency = <25000000>;
  73
  74                 partitions {
  75                         compatible = "fixed-partitions";
  76                         #address-cells = <1>;
  77                         #size-cells = <1>;
  78
  79                         uboot: partition@0 {
  80                                 label = "u-boot";
  81                                 reg = <0x000000 0x030000>;
  82                                 read-only;
  83                         };
  84
  85                         partition@30000 {
  86                                 label = "u-boot-env";
  87                                 reg = <0x030000 0x010000>;
  88                                 read-only;
  89                         };
  90
  91                         partition@40000 {
  92                                 compatible = "denx,uimage";
  93                                 label = "firmware";
  94                                 reg = <0x040000 0xf10000>;
  95                         };
  96
  97                         partition@f50000 {
  98                                 label = "manufacture";
  99                                 reg = <0xf50000 0x040000>;
 100                                 read-only;
 101                         };
 102
 103                         partition@f90000 {
 104                                 label = "backup";
 105                                 reg = <0xf90000  0x010000>;
 106                                 read-only;
 107                         };
 108
 109                         partition@fa0000 {
 110                                 label = "storage";
 111                                 reg = <0xfa0000 0x050000>;
 112                                 read-only;
 113                         };
 114
 115                         art: partition@ff0000 {
 116                                 label = "art";
 117                                 reg = <0xff0000 0x010000>;
 118                                 read-only;
 119                         };
 120                 };
 121         };
 122 };
 123
 124 &pcie0 {
 125         status = "okay";
 126 };
 127
 128 &pcie1 {
 129         status = "okay";
 130
 131         wifi@0,0 {
 132                 compatible = "qcom,ath10k";
 133                 reg = <0 0 0 0 0>;
 134         };
 135 };
 136
 137 &uart {
 138         status = "okay";
 139 };
 140
 141 &usb_phy0 {
 142         status = "okay";
 143 };
 144
 145 &usb0 {
 146         #address-cells = <1>;
 147         #size-cells = <0>;
 148         status = "okay";
 149 };
 150
 151 &mdio0 {
 152         status = "okay";
 153
 154         phy0: ethernet-phy@0 {
 155                 reg = <0>;
 156
 157                 qca,ar8327-initvals = <
 158                         0x04 0x87600000 /* PORT0 PAD MODE CTRL */
 159                         0x50 0xc437c437 /* LED Control Register 0 */
 160                         0x54 0xc337c337 /* LED Control Register 1 */
 161                         0x58 0x00000000 /* LED Control Register 2 */
 162                         0x5c 0x03ffff00 /* LED Control Register 3 */
 163                         0x7c 0x0000007e /* PORT0_STATUS */
 164                         >;
 165         };
 166 };
 167
 168 &eth0 {
 169         status = "okay";
 170         phy-handle = <&phy0>;
 171         pll-data = <0xa6000000 0x00000101 0x00001616>;
 172
 173         gmac-config {
 174                 device = <&gmac>;
 175                 rgmii-enabled = <1>;
 176         };
 177 };
 178
 179 &wmac {
 180         status = "okay";
 181         qca,no-eeprom;
 182 };