target/linux/ath79/dts/qca9558_tplink_tl-wr1043nd.dtsi

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2
   3 #include <dt-bindings/gpio/gpio.h>
   4 #include <dt-bindings/input/input.h>
   5
   6 #include "qca955x.dtsi"
   7
   8 / {
   9         aliases {
  10                 led-boot = &led_system;
  11                 led-failsafe = &led_system;
  12                 led-running = &led_system;
  13                 led-upgrade = &led_system;
  14                 label-mac-device = &wmac;
  15         };
  16
  17         leds {
  18                 compatible = "gpio-leds";
  19
  20                 led_system: system {
  21                         label = "tp-link:green:system";
  22                         gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
  23                         linux,default-trigger = "heartbeat";
  24                 };
  25
  26                 usb {
  27                         label = "tp-link:green:usb";
  28                         gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
  29                         trigger-sources = <&hub_port0>;
  30                         linux,default-trigger = "usbport";
  31                 };
  32
  33                 wifi_green {
  34                         label = "tp-link:green:wlan";
  35                         gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
  36                         linux,default-trigger = "phy0tpt";
  37                 };
  38
  39                 wifi_wps {
  40                         label = "tp-link:green:wps";
  41                         gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
  42                 };
  43         };
  44
  45         keys {
  46                 compatible = "gpio-keys";
  47
  48                 reset {
  49                         label = "Reset button";
  50                         linux,code = <KEY_RESTART>;
  51                         gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
  52                         debounce-interval = <60>;
  53                 };
  54
  55                 wifi {
  56                         label = "RFKILL button";
  57                         linux,code = <KEY_RFKILL>;
  58                         gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
  59                         debounce-interval = <60>;
  60                 };
  61         };
  62
  63         gpio-export {
  64                 compatible = "gpio-export";
  65                 #size-cells = <0>;
  66
  67                 gpio_usb_power {
  68                         gpio-export,name = "tp-link:power:usb";
  69                         gpio-export,output = <1>;
  70                         gpios = <&gpio 21 GPIO_ACTIVE_HIGH>;
  71                 };
  72         };
  73 };
  74
  75 &uart {
  76         status = "okay";
  77 };
  78
  79 &gpio {
  80         status = "okay";
  81 };
  82
  83 &usb_phy0 {
  84         status = "okay";
  85 };
  86
  87 &usb0 {
  88         #address-cells = <1>;
  89         #size-cells = <0>;
  90         status = "okay";
  91
  92         hub_port0: port@1 {
  93                 reg = <1>;
  94                 #trigger-source-cells = <0>;
  95         };
  96 };
  97
  98 &spi {
  99         status = "okay";
 100         num-cs = <1>;
 101
 102         flash@0 {
 103                 compatible = "jedec,spi-nor";
 104                 reg = <0>;
 105                 spi-max-frequency = <33400000>;
 106
 107                 partitions {
 108                         compatible = "fixed-partitions";
 109                         #address-cells = <1>;
 110                         #size-cells = <1>;
 111
 112                         uboot: partition@0 {
 113                                 label = "u-boot";
 114                                 reg = <0x000000 0x020000>;
 115                                 read-only;
 116                         };
 117
 118                         partition@20000 {
 119                                 compatible = "tplink,firmware";
 120                                 label = "firmware";
 121                                 reg = <0x020000 0x7d0000>;
 122                         };
 123
 124                         art: partition@7f0000 {
 125                                 label = "art";
 126                                 reg = <0x7f0000 0x010000>;
 127                                 read-only;
 128                         };
 129                 };
 130         };
 131 };
 132
 133 &mdio0 {
 134         status = "okay";
 135
 136         phy0: ethernet-phy@0 {
 137                 reg = <0>;
 138                 qca,ar8327-initvals = <
 139                         0x04 0x00080080 /* PORT0 PAD MODE CTRL */
 140                         0x0c 0x07600000 /* PORT6 PAD MODE CTRL */
 141                         0x10 0x81000080 /* POWER_ON_STRIP */
 142                         0x50 0xcc35cc35 /* LED_CTRL0 */
 143                         0x54 0xca35ca35 /* LED_CTRL1 */
 144                         0x58 0xc935c935 /* LED_CTRL2 */
 145                         0x5c 0x03ffff00 /* LED_CTRL3 */
 146                         0x7c 0x0000007e /* PORT0_STATUS */
 147                         0x94 0x0000007e /* PORT6 STATUS */
 148                 >;
 149         };
 150 };
 151
 152 &eth0 {
 153         status = "okay";
 154
 155         pll-data = <0x56000000 0x00000101 0x00001616>;
 156
 157         mtd-mac-address = <&uboot 0x1fc00>;
 158         mtd-mac-address-increment = <1>;
 159         phy-handle = <&phy0>;
 160 };
 161
 162 &eth1 {
 163         status = "okay";
 164
 165         pll-data = <0x03000101 0x00000101 0x00001616>;
 166
 167         mtd-mac-address = <&uboot 0x1fc00>;
 168
 169         fixed-link {
 170                 speed = <1000>;
 171                 full-duplex;
 172         };
 173 };
 174
 175 &wmac {
 176         status = "okay";
 177         mtd-cal-data = <&art 0x1000>;
 178         mtd-mac-address = <&uboot 0x1fc00>;
 179 };