target/linux/ath79/dts/qca9563_dlink_dir-859-a1.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "qca956x.dtsi"
   8
   9 / {
  10         model = "D-Link DIR-859 A1";
  11         compatible = "dlink,dir-859-a1", "qca,qca9563";
  12
  13         aliases {
  14                 led-boot = &led_power;
  15                 led-failsafe = &led_power;
  16                 led-running = &led_power;
  17                 led-upgrade = &led_power;
  18         };
  19
  20         leds {
  21                 compatible = "gpio-leds";
  22
  23                 wps {
  24                         label = "dir-859-a1:green:wps";
  25                         gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
  26                 };
  27
  28                 led_power: power {
  29                         label = "dir-859-a1:green:power";
  30                         gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
  31                 };
  32
  33                 internet {
  34                         label = "dir-859-a1:green:internet";
  35                         gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
  36                 };
  37
  38                 wlan {
  39                         label = "dir-859-a1:green:wlan";
  40                         gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
  41                         linux,default-trigger = "phy0tpt";
  42                 };
  43         };
  44
  45         keys {
  46                 compatible = "gpio-keys";
  47
  48                 wps {
  49                         linux,code = <KEY_WPS_BUTTON>;
  50                         gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
  51                         debounce-interval = <60>;
  52                 };
  53
  54                 reset {
  55                         linux,code = <KEY_RESTART>;
  56                         gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
  57                         debounce-interval = <60>;
  58                 };
  59         };
  60
  61         gpio-export {
  62                 compatible = "gpio-export";
  63                 #size-cells = <0>;
  64
  65                 gpio_switch_reset {
  66                         gpio-export,name = "dir-859-a1:reset:switch";
  67                         gpio-export,output = <1>;
  68                         gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
  69                 };
  70         };
  71 };
  72
  73 &uart {
  74         status = "okay";
  75 };
  76
  77 &gpio {
  78         status = "okay";
  79 };
  80
  81 &pcie {
  82         status = "okay";
  83 };
  84
  85 &spi {
  86         status = "okay";
  87
  88         num-cs = <1>;
  89
  90         flash@0 {
  91                 compatible = "jedec,spi-nor";
  92                 reg = <0>;
  93                 spi-max-frequency = <30000000>;
  94
  95                 partitions {
  96                         compatible = "fixed-partitions";
  97                         #address-cells = <1>;
  98                         #size-cells = <1>;
  99
 100                         partition@0 {
 101                                 label = "bootloader";
 102                                 reg = <0x000000 0x40000>;
 103                                 read-only;
 104                         };
 105
 106                         partition@40000 {
 107                                 label = "bdcfg";
 108                                 reg = <0x040000 0x10000>;
 109                                 read-only;
 110                         };
 111
 112                         partition@50000 {
 113                                 label = "devdata";
 114                                 reg = <0x050000 0x10000>;
 115                                 read-only;
 116                         };
 117
 118                         partition@60000 {
 119                                 label = "devconf";
 120                                 reg = <0x060000 0x10000>;
 121                                 read-only;
 122                         };
 123
 124                         partition@70000 {
 125                                 compatible = "seama";
 126                                 label = "firmware";
 127                                 reg = <0x070000 0xf80000>;
 128                         };
 129
 130                         art: partition@ff0000 {
 131                                 label = "art";
 132                                 reg = <0xff0000 0x010000>;
 133                                 read-only;
 134                         };
 135                 };
 136         };
 137 };
 138
 139 &mdio0 {
 140         status = "okay";
 141
 142         phy-mask = <0>;
 143
 144         phy0: ethernet-phy@0 {
 145                 reg = <0>;
 146                 phy-mode = "sgmii";
 147                 qca,mib-poll-interval = <500>;
 148
 149                 qca,ar8327-initvals = <
 150                         0x04 0x00080080 /* PORT0 PAD MODE CTRL */
 151                         0x10 0x81000080 /* POWER_ON_STRIP */
 152                         0x50 0xcc35cc35 /* LED_CTRL0 */
 153                         0x54 0xcb37cb37 /* LED_CTRL1 */
 154                         0x58 0x00000000 /* LED_CTRL2 */
 155                         0x5c 0x00f3cf00 /* LED_CTRL3 */
 156                         0x7c 0x0000007e /* PORT0_STATUS */
 157                         >;
 158         };
 159 };
 160
 161 &eth0 {
 162         status = "okay";
 163
 164         pll-data = <0x03000101 0x00000101 0x00001919>;
 165
 166         phy-mode = "sgmii";
 167         phy-handle = <&phy0>;
 168 };
 169
 170 &wmac {
 171         status = "okay";
 172
 173         qca,no-eeprom;
 174 };