target/linux/ath79/dts/qca9563_nec_wg1200cr.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "qca956x.dtsi"
   8
   9 / {
  10         model = "NEC Aterm WG1200CR";
  11         compatible = "nec,wg1200cr", "qca,qca9563";
  12
  13         aliases {
  14                 led-boot = &led_power_green;
  15                 led-failsafe = &led_power_red;
  16                 led-running = &led_power_green;
  17                 led-upgrade = &led_power_green;
  18         };
  19
  20         leds {
  21                 compatible = "gpio-leds";
  22                 /* other LEDs are connected to ath10k (QCA9888) gpiochip */
  23
  24                 led_power_green: power_green {
  25                         label = "wg1200cr:green:power";
  26                         gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
  27                         default-state = "on";
  28                 };
  29
  30                 led_power_red: power_red {
  31                         label = "wg1200cr:red:power";
  32                         gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
  33                 };
  34         };
  35
  36         keys {
  37                 compatible = "gpio-keys";
  38
  39                 reset {
  40                         label = "reset";
  41                         gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
  42                         linux,code = <KEY_RESTART>;
  43                         debounce-interval = <60>;
  44                 };
  45
  46                 wps {
  47                         label = "wps";
  48                         gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
  49                         linux,code = <KEY_WPS_BUTTON>;
  50                         debounce-interval = <60>;
  51                 };
  52
  53                 bridge {
  54                         label = "br";
  55                         gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
  56                         linux,code = <BTN_0>;
  57                         linux,input-type = <EV_SW>;
  58                         debounce-interval = <60>;
  59                 };
  60
  61                 converter {
  62                         label = "cnv";
  63                         gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
  64                         linux,code = <BTN_0>;
  65                         linux,input-type = <EV_SW>;
  66                         debounce-interval = <60>;
  67                 };
  68         };
  69 };
  70
  71 &spi {
  72         status = "okay";
  73
  74         num-cs = <1>;
  75
  76         flash@0 {
  77                 compatible = "jedec,spi-nor";
  78                 reg = <0>;
  79                 spi-max-frequency = <25000000>;
  80
  81                 partitions {
  82                         compatible = "fixed-partitions";
  83                         #address-cells = <1>;
  84                         #size-cells = <1>;
  85
  86                         partition@0 {
  87                                 label = "u-boot";
  88                                 reg = <0x000000 0x040000>;
  89                                 read-only;
  90                         };
  91
  92                         partition@40000 {
  93                                 label = "devdata";
  94                                 reg = <0x040000 0x010000>;
  95                                 read-only;
  96                         };
  97
  98                         partition@50000 {
  99                                 label = "devconf";
 100                                 reg = <0x050000 0x010000>;
 101                                 read-only;
 102                         };
 103
 104                         partition@60000 {
 105                                 label = "misc";
 106                                 reg = <0x060000 0x010000>;
 107                                 read-only;
 108                         };
 109
 110                         partition@70000 {
 111                                 label = "wifimngdata";
 112                                 reg = <0x070000 0x010000>;
 113                                 read-only;
 114                         };
 115
 116                         partition@80000 {
 117                                 compatible = "seama";
 118                                 label = "firmware";
 119                                 reg = <0x080000 0x770000>;
 120                         };
 121
 122                         partition@7f0000 {
 123                                 label = "art";
 124                                 reg = <0x7f0000 0x010000>;
 125                                 read-only;
 126                         };
 127                 };
 128         };
 129 };
 130
 131 &mdio0 {
 132         status = "okay";
 133
 134         phy0: ethernet-phy@0 {
 135                 reg = <0>;
 136
 137                 qca,ar8327-initvals = <
 138                         0x04 0x00000080 /* PORT0 PAD MODE CTRL */
 139                         0x50 0xcc35cc35 /* LED_CTRL0 */
 140                         0x54 0xca35ca35 /* LED_CTRL1 */
 141                         0x58 0xc935c935 /* LED_CTRL2 */
 142                         0x5c 0x03ffff00 /* LED_CTRL3 */
 143                         0x7c 0x0000007e /* PORT0_STATUS */
 144                 >;
 145         };
 146 };
 147
 148 &eth0 {
 149         status = "okay";
 150
 151         pll-data = <0x03000101 0x00000101 0x00001919>;
 152
 153         phy-mode = "sgmii";
 154         phy-handle = <&phy0>;
 155 };
 156
 157 &pcie {
 158         status = "okay";
 159
 160         wifi@0,0 {
 161                 compatible = "pci168c,0056";
 162                 reg = <0x0000 0 0 0 0>;
 163         };
 164 };
 165
 166 &uart {
 167         status = "okay";
 168 };
 169
 170 &wmac {
 171         status = "okay";
 172
 173         qca,no-eeprom;
 174 };