target/linux/ath79/dts/qca9563_nec_wg800hp.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "qca956x.dtsi"
   8
   9 / {
  10         model = "NEC Aterm WG800HP";
  11         compatible = "nec,wg800hp", "qca,qca9563";
  12
  13         aliases {
  14                 led-boot = &led_power_green;
  15                 led-failsafe = &led_power_red;
  16                 led-running = &led_power_green;
  17                 led-upgrade = &led_power_green;
  18         };
  19
  20         leds {
  21                 compatible = "gpio-leds";
  22                 pinctrl-names = "default";
  23                 pinctrl-0 = <&jtag_disable_pins>;
  24
  25                 wlan2g_red {
  26                         label = "wg800hp:red:wlan2g";
  27                         gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
  28                 };
  29
  30                 active_red {
  31                         label = "wg800hp:red:active";
  32                         gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
  33                 };
  34
  35                 active_green {
  36                         label = "wg800hp:green:active";
  37                         gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
  38                 };
  39
  40                 led_power_red: power_red {
  41                         label = "wg800hp:red:power";
  42                         gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
  43                 };
  44
  45                 led_power_green: power_green {
  46                         label = "wg800hp:green:power";
  47                         gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
  48                         default-state = "on";
  49                 };
  50
  51                 wlan5g_red {
  52                         label = "wg800hp:red:wlan5g";
  53                         gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
  54                 };
  55
  56                 wlan5g_green {
  57                         label = "wg800hp:green:wlan5g";
  58                         gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
  59                         linux,default-trigger = "phy0tpt";
  60                 };
  61
  62                 wlan2g_green {
  63                         label = "wg800hp:green:wlan2g";
  64                         gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
  65                         linux,default-trigger = "phy1tpt";
  66                 };
  67         };
  68
  69         keys {
  70                 compatible = "gpio-keys";
  71
  72                 br {
  73                         label = "br";
  74                         gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
  75                         linux,code = <BTN_0>;
  76                         linux,input-type = <EV_SW>;
  77                         debounce-interval = <60>;
  78                 };
  79
  80                 reset {
  81                         label = "reset";
  82                         gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
  83                         linux,code = <KEY_RESTART>;
  84                         debounce-interval = <60>;
  85                 };
  86
  87                 wps {
  88                         label = "wps";
  89                         gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
  90                         linux,code = <KEY_WPS_BUTTON>;
  91                         debounce-interval = <60>;
  92                 };
  93         };
  94 };
  95
  96 &spi {
  97         status = "okay";
  98         num-cs = <1>;
  99
 100         flash@0 {
 101                 compatible = "jedec,spi-nor";
 102                 reg = <0>;
 103                 spi-max-frequency = <25000000>;
 104
 105                 partitions {
 106                         compatible = "fixed-partitions";
 107                         #address-cells = <1>;
 108                         #size-cells = <1>;
 109
 110                         partition@0 {
 111                                 label = "u-boot";
 112                                 reg = <0x000000 0x040000>;
 113                                 read-only;
 114                         };
 115
 116                         partition@40000 {
 117                                 label = "u-boot-env";
 118                                 reg = <0x040000 0x010000>;
 119                                 read-only;
 120                         };
 121
 122                         partition@50000 {
 123                                 compatible = "denx,uimage";
 124                                 label = "firmware";
 125                                 reg = <0x050000 0x6f0000>;
 126                         };
 127
 128                         partition@740000 {
 129                                 label = "user_data";
 130                                 reg = <0x740000 0x0a0000>;
 131                                 read-only;
 132                         };
 133
 134                         partition@7e0000 {
 135                                 label = "board_data";
 136                                 reg = <0x7e0000 0x010000>;
 137                                 read-only;
 138                         };
 139
 140                         art: partition@7f0000 {
 141                                 label = "art";
 142                                 reg = <0x7f0000 0x010000>;
 143                                 read-only;
 144                         };
 145                 };
 146         };
 147 };
 148
 149 &mdio0 {
 150         status = "okay";
 151
 152         phy0: ethernet-phy@0 {
 153                 reg = <0>;
 154
 155                 qca,ar8327-initvals = <
 156                         0x04 0x00000080 /* PORT0 PAD MODE CTRL */
 157                         0x50 0xcc35cc35 /* LED_CTRL0 */
 158                         0x54 0xca35ca35 /* LED_CTRL1 */
 159                         0x58 0xc935c935 /* LED_CTRL2 */
 160                         0x5c 0x03ffff00 /* LED_CTRL3 */
 161                         0x7c 0x0000007e /* PORT0_STATUS */
 162                 >;
 163         };
 164 };
 165
 166 &eth0 {
 167         status = "okay";
 168
 169         phy-mode = "sgmii";
 170         phy-handle = <&phy0>;
 171 };
 172
 173 &pcie {
 174         status = "okay";
 175 };
 176
 177 &uart {
 178         status = "okay";
 179 };
 180
 181 &wmac {
 182         status = "okay";
 183         qca,no-eeprom;
 184 };