target/linux/ath79/dts/qca9563_netgear_wndr.dtsi

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2
   3 #include <dt-bindings/gpio/gpio.h>
   4 #include <dt-bindings/input/input.h>
   5
   6 #include "qca956x.dtsi"
   7
   8 / {
   9         aliases {
  10                 led-boot = &led_power_amber;
  11                 led-failsafe = &led_power_amber;
  12                 led-running = &led_power_green;
  13                 led-upgrade = &led_power_amber;
  14                 label-mac-device = &eth0;
  15         };
  16
  17         keys {
  18                 compatible = "gpio-keys";
  19
  20                 wps {
  21                         label = "wps";
  22                         linux,code = <KEY_WPS_BUTTON>;
  23                         gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
  24                 };
  25
  26                 reset {
  27                         label = "reset";
  28                         linux,code = <KEY_RESTART>;
  29                         gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
  30                 };
  31         };
  32
  33         ath9k-keys {
  34                 compatible = "gpio-keys-polled";
  35                 poll-interval = <20>;
  36
  37                 rfkill {
  38                         label = "rfkill";
  39                         linux,code = <KEY_RFKILL>;
  40                         gpios = <&ath9k 9 GPIO_ACTIVE_LOW>;
  41                         debounce-interval = <60>;
  42                 };
  43         };
  44
  45         leds: leds {
  46                 compatible = "gpio-leds";
  47
  48                 pinctrl-names = "default";
  49                 pinctrl-0 = <&jtag_disable_pins>;
  50
  51                 led_power_green: power_green {
  52                         label = "netgear:green:power";
  53                         gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
  54                 };
  55
  56                 led_power_amber: power_amber {
  57                         label = "netgear:amber:power";
  58                         gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
  59                         default-state = "keep";
  60                 };
  61
  62                 wan_green {
  63                         label = "netgear:green:wan";
  64                         gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
  65                 };
  66
  67                 wan_amber {
  68                         label = "netgear:amber:wan";
  69                         gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
  70                 };
  71
  72                 wlan2g_green {
  73                         label = "netgear:green:wlan2g";
  74                         gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
  75                         linux,default-trigger = "phy0tpt";
  76                 };
  77
  78                 wps_green {
  79                         label = "netgear:green:wps";
  80                         gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
  81                 };
  82         };
  83
  84         ath9k-leds {
  85                 compatible = "gpio-leds";
  86
  87                 wlan5g_blue {
  88                         label = "netgear:blue:wlan5g";
  89                         gpios = <&ath9k 7 GPIO_ACTIVE_LOW>;
  90                         linux,default-trigger = "phy1tpt";
  91                 };
  92         };
  93 };
  94
  95 &spi {
  96         status = "okay";
  97
  98         num-cs = <2>;
  99
 100         flash@0 {
 101                 compatible = "jedec,spi-nor";
 102                 reg = <0>;
 103                 spi-max-frequency = <25000000>;
 104
 105                 partitions {
 106                         compatible = "fixed-partitions";
 107                         #address-cells = <1>;
 108                         #size-cells = <1>;
 109
 110                         partition@0 {
 111                                 label = "u-boot";
 112                                 reg = <0x0 0x40000>;
 113                                 read-only;
 114                         };
 115
 116                         partition@40000 {
 117                                 label = "u-boot-env";
 118                                 reg = <0x40000 0x10000>;
 119                         };
 120
 121                         partition@50000 {
 122                                 label = "caldata_backup";
 123                                 reg = <0x50000 0x10000>;
 124                                 read-only;
 125                         };
 126
 127                         partition@60000 {
 128                                 label = "config";
 129                                 reg = <0x60000 0x10000>;
 130                         };
 131
 132                         partition@70000 {
 133                                 label = "traffic_meter";
 134                                 reg = <0x70000 0x10000>;
 135                         };
 136
 137                         partition@80000 {
 138                                 label = "pot";
 139                                 reg = <0x80000 0x10000>;
 140                         };
 141
 142                         partition@90000 {
 143                                 label = "reserved";
 144                                 reg = <0x90000 0x160000>;
 145                         };
 146
 147                         caldata: partition@1f0000 {
 148                                 label = "caldata";
 149                                 reg = <0x1f0000 0x10000>;
 150                                 read-only;
 151                         };
 152                 };
 153         };
 154
 155         flash@1 {
 156                 compatible = "spi-nand";
 157                 reg = <1>;
 158                 spi-max-frequency = <25000000>;
 159
 160                 partitions {
 161                         compatible = "fixed-partitions";
 162                         #address-cells = <1>;
 163                         #size-cells = <1>;
 164
 165                         partition@0 {
 166                                 label = "kernel";
 167                                 reg = <0x0 0x400000>;
 168                         };
 169
 170                         partition@400000 {
 171                                 label = "ubi";
 172                                 reg = <0x400000 0x7c00000>;
 173                         };
 174                 };
 175         };
 176 };
 177
 178 &mdio0 {
 179         status = "okay";
 180
 181         phy-mask = <0>;
 182
 183         phy0: ethernet-phy@0 {
 184                 reg = <0>;
 185                 phy-mode = "sgmii";
 186                 qca,mib-poll-interval = <500>;
 187
 188                 qca,ar8327-initvals = <
 189                         0x04 0x00000080 /* PORT0 PAD MODE CTRL */
 190                         0x10 0x81000080 /* POWER_ON_STRIP */
 191                         0x50 0xcc35cc35 /* LED_CTRL0 */
 192                         0x54 0xcb37cb37 /* LED_CTRL1 */
 193                         0x58 0x00000000 /* LED_CTRL2 */
 194                         0x5c 0x00f3cf00 /* LED_CTRL3 */
 195                         0x7c 0x0000007e /* PORT0_STATUS */
 196                         0x94 0x00000200 /* PORT6_STATUS */
 197                         >;
 198         };
 199 };
 200
 201 &eth0 {
 202         status = "okay";
 203
 204         pll-data = <0x03000101 0x00000101 0x00001919>;
 205
 206         mtd-mac-address = <&caldata 0x0>;
 207
 208         phy-mode = "sgmii";
 209         phy-handle = <&phy0>;
 210 };
 211
 212 &wmac {
 213         status = "okay";
 214
 215         mtd-mac-address = <&caldata 0x0>;
 216         qca,no-eeprom;
 217 };
 218
 219 &pcie {
 220         status = "okay";
 221
 222         ath9k: wifi@0,0 {
 223                 /* chip is AR9580, override bogus PCI ID 168c:abcd */
 224                 compatible = "pci168c,0033";
 225                 reg = <0x0000 0 0 0 0>;
 226                 mtd-mac-address = <&caldata 0xc>;
 227                 qca,no-eeprom;
 228                 qca,gpio-mask=<0xf6ff>; /* unmask pin 9 for RFKILL button */
 229                 #gpio-cells = <2>;
 230                 gpio-controller;
 231         };
 232 };
 233
 234 &usb_phy0 {
 235         status = "okay";
 236 };
 237
 238 &usb0 {
 239         #address-cells = <1>;
 240         #size-cells = <0>;
 241         status = "okay";
 242
 243         hub_port0: port@1 {
 244                 reg = <1>;
 245                 #trigger-source-cells = <0>;
 246         };
 247 };
 248
 249 &uart {
 250         status = "okay";
 251 };