target/linux/ath79/dts/qca9563_tplink_archer-c2-v3.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "qca956x.dtsi"
   8
   9 / {
  10         compatible = "tplink,archer-c2-v3", "qca,qca9563";
  11         model = "TP-Link Archer C2 v3";
  12
  13         aliases {
  14                 led-boot = &led_system;
  15                 led-failsafe = &led_system;
  16                 led-running = &led_system;
  17                 led-upgrade = &led_system;
  18         };
  19
  20         leds {
  21                 compatible = "gpio-leds";
  22
  23                 led_system: system {
  24                         label = "tp-link:green:system";
  25                         gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
  26                         default-state = "on";
  27                 };
  28
  29                 wifi2g {
  30                         label = "tp-link:green:wifi2g";
  31                         gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
  32                         linux,default-trigger = "phy1tpt";
  33                 };
  34
  35                 wifi5g {
  36                         label = "tp-link:green:wifi5g";
  37                         gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
  38                         linux,default-trigger = "phy0tpt";
  39                 };
  40
  41                 wifi_wps {
  42                         label = "tp-link:green:wps";
  43                         gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
  44                 };
  45
  46                 wan {
  47                         label = "tp-link:green:wan";
  48                         gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
  49                 };
  50
  51                 wan_fail {
  52                         label = "tp-link:orange:wan";
  53                         gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
  54                 };
  55
  56                 lan1 {
  57                         label = "tp-link:green:lan1";
  58                         gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
  59                 };
  60
  61                 lan2 {
  62                         label = "tp-link:green:lan2";
  63                         gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
  64                 };
  65
  66                 lan3 {
  67                         label = "tp-link:green:lan3";
  68                         gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
  69                 };
  70
  71                 lan4 {
  72                         label = "tp-link:green:lan4";
  73                         gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
  74                 };
  75         };
  76
  77         keys {
  78                 compatible = "gpio-keys";
  79
  80                 reset {
  81                         label = "Reset button";
  82                         linux,code = <KEY_RESTART>;
  83                         gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
  84                         debounce-interval = <60>;
  85                 };
  86
  87                 wps {
  88                         label = "WPS button";
  89                         linux,code = <KEY_WPS_BUTTON>;
  90                         gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
  91                         debounce-interval = <60>;
  92                 };
  93         };
  94 };
  95
  96 &uart {
  97         status = "okay";
  98 };
  99
 100 &spi {
 101         status = "okay";
 102
 103         num-cs = <1>;
 104
 105         flash@0 {
 106                 compatible = "jedec,spi-nor";
 107                 reg = <0>;
 108                 spi-max-frequency = <25000000>;
 109
 110                 partitions {
 111                         compatible = "fixed-partitions";
 112                         #address-cells = <1>;
 113                         #size-cells = <1>;
 114
 115                         partition@0 {
 116                                 label = "factory-uboot";
 117                                 reg = <0x000000 0x020000>;
 118                                 read-only;
 119                         };
 120
 121                         partition@20000 {
 122                                 label = "uboot";
 123                                 reg = <0x020000 0x10000>;
 124                                 read-only;
 125                         };
 126
 127                         partition@30000 {
 128                                 label = "firmware";
 129                                 reg = <0x030000 0x7A0000>;
 130                                 compatible = "denx,uimage";
 131                         };
 132
 133                         info: partition@7e0000 {
 134                                 label = "info";
 135                                 reg = <0x7e0000 0x010000>;
 136                                 read-only;
 137                         };
 138
 139                         art: partition@7f0000 {
 140                                 label = "art";
 141                                 reg = <0x7f0000 0x010000>;
 142                                 read-only;
 143                         };
 144                 };
 145         };
 146 };
 147
 148 &gpio {
 149         status = "okay";
 150 };
 151
 152 &mdio0 {
 153         status = "okay";
 154
 155         phy-mask = <0>;
 156         phy0: ethernet-phy@0 {
 157                 reg = <0>;
 158                 phy-mode = "sgmii";
 159                 qca,mib-poll-interval = <500>;
 160
 161                 qca,ar8327-initvals = <
 162                         0x04 0x00080080 /* PORT0 PAD MODE CTRL */
 163                         0x7c 0x0000007e /* PORT0_STATUS */
 164                 >;
 165         };
 166 };
 167
 168 &pcie {
 169         status = "okay";
 170 };
 171
 172 &eth0 {
 173         status = "okay";
 174
 175         mtd-mac-address = <&info 0x8>;
 176         phy-mode = "sgmii";
 177         phy-handle = <&phy0>;
 178 };
 179
 180 &wmac {
 181         status = "okay";
 182
 183         mtd-cal-data = <&art 0x1000>;
 184         mtd-mac-address = <&info 0x8>;
 185 };