target/linux/ath79/dts/qca9563_tplink_archer-x7-v5.dtsi

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2
   3 #include <dt-bindings/gpio/gpio.h>
   4 #include <dt-bindings/input/input.h>
   5
   6 #include "qca956x.dtsi"
   7
   8 / {
   9         aliases {
  10                 led-boot = &led_system;
  11                 led-failsafe = &led_system;
  12                 led-running = &led_system;
  13                 led-upgrade = &led_system;
  14                 label-mac-device = &eth0;
  15         };
  16
  17         leds {
  18                 compatible = "gpio-leds";
  19
  20                 led_system: system {
  21                         label = "tp-link:green:system";
  22                         gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
  23                         default-state = "on";
  24                 };
  25
  26                 usb {
  27                         label = "tp-link:green:usb";
  28                         gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
  29                         trigger-sources = <&hub_port0>;
  30                         linux,default-trigger = "usbport";
  31                 };
  32
  33                 wlan5g {
  34                         label = "tp-link:green:wlan5g";
  35                         gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
  36                         linux,default-trigger = "phy0tpt";
  37                 };
  38
  39                 wlan2g {
  40                         label = "tp-link:green:wlan2g";
  41                         gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
  42                         linux,default-trigger = "phy1tpt";
  43                 };
  44
  45                 wan {
  46                         label = "tp-link:green:wan";
  47                         gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
  48                 };
  49
  50                 wan_fail {
  51                         label = "tp-link:orange:wan";
  52                         gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
  53                 };
  54
  55                 lan1 {
  56                         label = "tp-link:green:lan1";
  57                         gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
  58                 };
  59
  60                 lan2 {
  61                         label = "tp-link:green:lan2";
  62                         gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
  63                 };
  64
  65                 lan3 {
  66                         label = "tp-link:green:lan3";
  67                         gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
  68                 };
  69
  70                 lan4 {
  71                         label = "tp-link:green:lan4";
  72                         gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
  73                 };
  74
  75                 wps {
  76                         label = "tp-link:green:wps";
  77                         gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
  78                 };
  79         };
  80
  81         keys: keys {
  82                 compatible = "gpio-keys";
  83
  84                 wps {
  85                         label = "WPS button";
  86                         linux,code = <KEY_WPS_BUTTON>;
  87                         gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
  88                         debounce-interval = <60>;
  89                 };
  90         };
  91
  92         gpio-export {
  93                 compatible = "gpio-export";
  94
  95                 gpio_usb_power {
  96                         gpio-export,name = "tp-link:power:usb";
  97                         gpio-export,output = <1>;
  98                         gpios = <&gpio 19 GPIO_ACTIVE_HIGH>;
  99                 };
 100         };
 101 };
 102
 103 &pcie {
 104         status = "okay";
 105 };
 106
 107 &uart {
 108         status = "okay";
 109 };
 110
 111 &gpio {
 112         status = "okay";
 113 };
 114
 115 &usb_phy0 {
 116         status = "okay";
 117 };
 118
 119 &usb0 {
 120         #address-cells = <1>;
 121         #size-cells = <0>;
 122         status = "okay";
 123
 124         hub_port0: port@1 {
 125                 reg = <1>;
 126                 #trigger-source-cells = <0>;
 127         };
 128 };
 129
 130 &spi {
 131         status = "okay";
 132
 133         num-cs = <1>;
 134
 135         flash@0 {
 136                 compatible = "jedec,spi-nor";
 137                 reg = <0>;
 138                 spi-max-frequency = <25000000>;
 139
 140                 mtdparts: partitions {
 141                         compatible = "fixed-partitions";
 142                         #address-cells = <1>;
 143                         #size-cells = <1>;
 144                 };
 145         };
 146 };
 147
 148 &mdio0 {
 149         status = "okay";
 150
 151         phy-mask = <0>;
 152
 153         phy0: ethernet-phy@0 {
 154                 reg = <0>;
 155                 phy-mode = "sgmii";
 156                 qca,mib-poll-interval = <500>;
 157
 158                 qca,ar8327-initvals = <
 159                         0x04 0x80080080 /* PORT0 PAD MODE CTRL */
 160                         0x08 0x00000000 /* PORT5 PAD MODE CTRL */
 161                         0x0c 0x00000000 /* PORT6 PAD MODE CTRL */
 162                         0x10 0x00000080 /* POWER_ON_STRIP */
 163                         0x7c 0x0000007e /* PORT0_STATUS */
 164                         0x94 0x00000200 /* PORT6_STATUS */
 165                         >;
 166         };
 167 };
 168
 169 &eth0 {
 170         status = "okay";
 171
 172         pll-data = <0x03000101 0x00000101 0x00001919>;
 173
 174         phy-mode = "sgmii";
 175         mtd-mac-address = <&info 0x8>;
 176         phy-handle = <&phy0>;
 177 };
 178
 179 &wmac {
 180         status = "okay";
 181
 182         mtd-cal-data = <&art 0x1000>;
 183         mtd-mac-address = <&info 0x8>;
 184 };