target/linux/ath79/dts/qca9563_tplink_re450.dtsi

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2
   3 #include <dt-bindings/gpio/gpio.h>
   4 #include <dt-bindings/input/input.h>
   5
   6 #include "qca956x.dtsi"
   7
   8 / {
   9         aliases {
  10                 label-mac-device = &eth0;
  11                 led-boot = &led_power;
  12                 led-failsafe = &led_power;
  13                 led-running = &led_power;
  14                 led-upgrade = &led_power;
  15                 mdio-gpio0 = &mdio2;
  16         };
  17
  18         leds {
  19                 compatible = "gpio-leds";
  20
  21                 led_power: power {
  22                         label = "tp-link:blue:power";
  23                         gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
  24                 };
  25
  26                 wlan2g {
  27                         label = "tp-link:blue:wlan2g";
  28                         gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
  29                         linux,default-trigger = "phy1tpt";
  30                 };
  31
  32                 wlan5g {
  33                         label = "tp-link:blue:wlan5g";
  34                         gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
  35                         linux,default-trigger = "phy0tpt";
  36                 };
  37
  38                 lan_link {
  39                         label = "tp-link:green:lan_link";
  40                         gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
  41                 };
  42
  43                 lan_data {
  44                         label = "tp-link:green:lan_data";
  45                         gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
  46                 };
  47
  48                 wps_blue {
  49                         label = "tp-link:blue:wps";
  50                         gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
  51                 };
  52
  53                 wps_red {
  54                         label = "tp-link:red:wps";
  55                         gpios = <&gpio 20 GPIO_ACTIVE_HIGH>;
  56                 };
  57         };
  58
  59         keys {
  60                 compatible = "gpio-keys";
  61
  62                 reset {
  63                         label = "Reset button";
  64                         linux,code = <KEY_RESTART>;
  65                         gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
  66                         debounce-interval = <60>;
  67                 };
  68
  69                 power {
  70                         label = "Power button";
  71                         linux,code = <KEY_POWER>;
  72                         gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
  73                         debounce-interval = <60>;
  74                 };
  75
  76                 leds {
  77                         label = "LED control button";
  78                         linux,code = <BTN_0>;
  79                         gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
  80                         debounce-interval = <60>;
  81                 };
  82
  83                 wps {
  84                         label = "WPS button";
  85                         linux,code = <KEY_WPS_BUTTON>;
  86                         gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
  87                         debounce-interval = <60>;
  88                 };
  89         };
  90
  91         mdio2: mdio {
  92                 compatible = "virtual,mdio-gpio";
  93
  94                 gpios = <&gpio 3 GPIO_ACTIVE_HIGH>, /* MDC */
  95                         <&gpio 4 GPIO_ACTIVE_HIGH>; /* MDIO */
  96                 #address-cells = <1>;
  97                 #size-cells = <0>;
  98
  99                 phy4: ethernet-phy@4 {
 100                         reg = <4>;
 101                         device_type = "ethernet-phy";
 102                         reset-gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
 103                 };
 104         };
 105 };
 106
 107 &pcie {
 108         status = "okay";
 109 };
 110
 111 &uart {
 112         status = "okay";
 113 };
 114
 115 &gpio {
 116         status = "okay";
 117 };
 118
 119 &spi {
 120         status = "okay";
 121
 122         num-cs = <1>;
 123
 124         flash@0 {
 125                 compatible = "jedec,spi-nor";
 126                 reg = <0>;
 127                 spi-max-frequency = <25000000>;
 128
 129                 partitions: partitions {
 130                         compatible = "fixed-partitions";
 131                         #address-cells = <1>;
 132                         #size-cells = <1>;
 133                 };
 134         };
 135 };
 136
 137 &eth0 {
 138         status = "okay";
 139
 140         phy-mode = "sgmii";
 141         phy-handle = <&phy4>;
 142
 143         mtd-mac-address = <&info 0x8>;
 144 };
 145
 146 &wmac {
 147         status = "okay";
 148
 149         mtd-cal-data = <&art 0x1000>;
 150         mtd-mac-address = <&info 0x8>;
 151 };