target/linux/ipq40xx/patches-5.15/850-soc-add-qualcomm-syscon.patch

   1 From: Christian Lamparter <chunkeey@googlemail.com>
   2 Subject: SoC: add qualcomm syscon
   3 --- a/drivers/soc/qcom/Makefile
   4 +++ b/drivers/soc/qcom/Makefile
   5 @@ -21,6 +21,7 @@ obj-$(CONFIG_QCOM_SMP2P)      += smp2p.o
   6  obj-$(CONFIG_QCOM_SMSM)        += smsm.o
   7  obj-$(CONFIG_QCOM_SOCINFO)     += socinfo.o
   8  obj-$(CONFIG_QCOM_WCNSS_CTRL) += wcnss_ctrl.o
   9 +obj-$(CONFIG_QCOM_TCSR)         += qcom_tcsr.o
  10  obj-$(CONFIG_QCOM_APR) += apr.o
  11  obj-$(CONFIG_QCOM_LLCC) += llcc-qcom.o
  12  obj-$(CONFIG_QCOM_RPMHPD) += rpmhpd.o
  13 --- a/drivers/soc/qcom/Kconfig
  14 +++ b/drivers/soc/qcom/Kconfig
  15 @@ -189,6 +189,13 @@ config QCOM_SOCINFO
  16          Say yes here to support the Qualcomm socinfo driver, providing
  17          information about the SoC to user space.
  18
  19 +config QCOM_TCSR
  20 +       tristate "QCOM Top Control and Status Registers"
  21 +       depends on ARCH_QCOM
  22 +       help
  23 +         Say y here to enable TCSR support.  The TCSR provides control
  24 +         functions for various peripherals.
  25 +
  26  config QCOM_WCNSS_CTRL
  27         tristate "Qualcomm WCNSS control driver"
  28         depends on ARCH_QCOM || COMPILE_TEST
  29 --- /dev/null
  30 +++ b/drivers/soc/qcom/qcom_tcsr.c
  31 @@ -0,0 +1,98 @@
  32 +/*
  33 + * Copyright (c) 2014, The Linux foundation. All rights reserved.
  34 + *
  35 + * This program is free software; you can redistribute it and/or modify
  36 + * it under the terms of the GNU General Public License rev 2 and
  37 + * only rev 2 as published by the free Software foundation.
  38 + *
  39 + * This program is distributed in the hope that it will be useful,
  40 + * but WITHOUT ANY WARRANTY; without even the implied warranty of
  41 + * MERCHANTABILITY or fITNESS fOR A PARTICULAR PURPOSE.  See the
  42 + * GNU General Public License for more details.
  43 + */
  44 +
  45 +#include <linux/clk.h>
  46 +#include <linux/err.h>
  47 +#include <linux/io.h>
  48 +#include <linux/module.h>
  49 +#include <linux/of.h>
  50 +#include <linux/of_platform.h>
  51 +#include <linux/platform_device.h>
  52 +
  53 +#define TCSR_USB_PORT_SEL      0xb0
  54 +#define TCSR_USB_HSPHY_CONFIG  0xC
  55 +
  56 +#define TCSR_ESS_INTERFACE_SEL_OFFSET   0x0
  57 +#define TCSR_ESS_INTERFACE_SEL_MASK     0xf
  58 +
  59 +#define TCSR_WIFI0_GLB_CFG_OFFSET      0x0
  60 +#define TCSR_WIFI1_GLB_CFG_OFFSET      0x4
  61 +#define TCSR_PNOC_SNOC_MEMTYPE_M0_M2   0x4
  62 +
  63 +static int tcsr_probe(struct platform_device *pdev)
  64 +{
  65 +       struct resource *res;
  66 +       const struct device_node *node = pdev->dev.of_node;
  67 +       void __iomem *base;
  68 +       u32 val;
  69 +
  70 +       res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
  71 +       base = devm_ioremap_resource(&pdev->dev, res);
  72 +       if (IS_ERR(base))
  73 +               return PTR_ERR(base);
  74 +
  75 +       if (!of_property_read_u32(node, "qcom,usb-ctrl-select", &val)) {
  76 +               dev_err(&pdev->dev, "setting usb port select = %d\n", val);
  77 +               writel(val, base + TCSR_USB_PORT_SEL);
  78 +       }
  79 +
  80 +       if (!of_property_read_u32(node, "qcom,usb-hsphy-mode-select", &val)) {
  81 +               dev_info(&pdev->dev, "setting usb hs phy mode select = %x\n", val);
  82 +               writel(val, base + TCSR_USB_HSPHY_CONFIG);
  83 +       }
  84 +
  85 +       if (!of_property_read_u32(node, "qcom,ess-interface-select", &val)) {
  86 +               u32 tmp = 0;
  87 +               dev_info(&pdev->dev, "setting ess interface select = %x\n", val);
  88 +               tmp = readl(base + TCSR_ESS_INTERFACE_SEL_OFFSET);
  89 +               tmp = tmp & (~TCSR_ESS_INTERFACE_SEL_MASK);
  90 +               tmp = tmp | (val&TCSR_ESS_INTERFACE_SEL_MASK);
  91 +               writel(tmp, base + TCSR_ESS_INTERFACE_SEL_OFFSET);
  92 +        }
  93 +
  94 +       if (!of_property_read_u32(node, "qcom,wifi_glb_cfg", &val)) {
  95 +               dev_info(&pdev->dev, "setting wifi_glb_cfg = %x\n", val);
  96 +               writel(val, base + TCSR_WIFI0_GLB_CFG_OFFSET);
  97 +               writel(val, base + TCSR_WIFI1_GLB_CFG_OFFSET);
  98 +       }
  99 +
 100 +       if (!of_property_read_u32(node, "qcom,wifi_noc_memtype_m0_m2", &val)) {
 101 +               dev_info(&pdev->dev,
 102 +                       "setting wifi_noc_memtype_m0_m2 = %x\n", val);
 103 +               writel(val, base + TCSR_PNOC_SNOC_MEMTYPE_M0_M2);
 104 +       }
 105 +
 106 +       return 0;
 107 +}
 108 +
 109 +static const struct of_device_id tcsr_dt_match[] = {
 110 +       { .compatible = "qcom,tcsr", },
 111 +       { },
 112 +};
 113 +
 114 +MODULE_DEVICE_TABLE(of, tcsr_dt_match);
 115 +
 116 +static struct platform_driver tcsr_driver = {
 117 +       .driver = {
 118 +               .name           = "tcsr",
 119 +               .owner          = THIS_MODULE,
 120 +               .of_match_table = tcsr_dt_match,
 121 +       },
 122 +       .probe = tcsr_probe,
 123 +};
 124 +
 125 +module_platform_driver(tcsr_driver);
 126 +
 127 +MODULE_AUTHOR("Andy Gross <agross@codeaurora.org>");
 128 +MODULE_DESCRIPTION("QCOM TCSR driver");
 129 +MODULE_LICENSE("GPL v2");
 130 --- /dev/null
 131 +++ b/include/dt-bindings/soc/qcom,tcsr.h
 132 @@ -0,0 +1,48 @@
 133 +/* Copyright (c) 2014, The Linux Foundation. All rights reserved.
 134 + *
 135 + * This program is free software; you can redistribute it and/or modify
 136 + * it under the terms of the GNU General Public License version 2 and
 137 + * only version 2 as published by the Free Software Foundation.
 138 + *
 139 + * This program is distributed in the hope that it will be useful,
 140 + * but WITHOUT ANY WARRANTY; without even the implied warranty of
 141 + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 142 + * GNU General Public License for more details.
 143 + */
 144 +#ifndef __DT_BINDINGS_QCOM_TCSR_H
 145 +#define __DT_BINDINGS_QCOM_TCSR_H
 146 +
 147 +#define TCSR_USB_SELECT_USB3_P0                0x1
 148 +#define TCSR_USB_SELECT_USB3_P1                0x2
 149 +#define TCSR_USB_SELECT_USB3_DUAL      0x3
 150 +
 151 +/* IPQ40xx HS PHY Mode Select */
 152 +#define TCSR_USB_HSPHY_HOST_MODE       0x00E700E7
 153 +#define TCSR_USB_HSPHY_DEVICE_MODE     0x00C700E7
 154 +
 155 +/* IPQ40xx ess interface mode select */
 156 +#define TCSR_ESS_PSGMII              0
 157 +#define TCSR_ESS_PSGMII_RGMII5       1
 158 +#define TCSR_ESS_PSGMII_RMII0        2
 159 +#define TCSR_ESS_PSGMII_RMII1        4
 160 +#define TCSR_ESS_PSGMII_RMII0_RMII1  6
 161 +#define TCSR_ESS_PSGMII_RGMII4       9
 162 +
 163 +/*
 164 + * IPQ40xx WiFi Global Config
 165 + * Bit 30:AXID_EN
 166 + * Enable AXI master bus Axid translating to confirm all txn submitted by order
 167 + * Bit 24: Use locally generated socslv_wxi_bvalid
 168 + * 1:  use locally generate socslv_wxi_bvalid for performance.
 169 + * 0:  use SNOC socslv_wxi_bvalid.
 170 + */
 171 +#define TCSR_WIFI_GLB_CFG              0x41000000
 172 +
 173 +/* IPQ40xx MEM_TYPE_SEL_M0_M2 Select Bit 26:24 - 2 NORMAL */
 174 +#define TCSR_WIFI_NOC_MEMTYPE_M0_M2    0x02222222
 175 +
 176 +/* TCSR A/B REG */
 177 +#define IPQ806X_TCSR_REG_A_ADM_CRCI_MUX_SEL     0
 178 +#define IPQ806X_TCSR_REG_B_ADM_CRCI_MUX_SEL     1
 179 +
 180 +#endif