target/linux/ipq40xx/patches-5.15/902-dts-ipq4019-ap-dk04.1.patch

   1 --- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi
   2 +++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi
   3 @@ -17,53 +17,79 @@
   4                 stdout-path = "serial0:115200n8";
   5         };
   6
   7 -       memory {
   8 -               device_type = "memory";
   9 -               reg = <0x80000000 0x10000000>; /* 256MB */
  10 -       };
  11 -
  12         soc {
  13 +               rng@22000 {
  14 +                       status = "okay";
  15 +               };
  16 +
  17                 pinctrl@1000000 {
  18                         serial_0_pins: serial0-pinmux {
  19 -                               pins = "gpio16", "gpio17";
  20 -                               function = "blsp_uart0";
  21 -                               bias-disable;
  22 +                               mux {
  23 +                                       pins = "gpio16", "gpio17";
  24 +                                       function = "blsp_uart0";
  25 +                                       bias-disable;
  26 +                               };
  27                         };
  28
  29                         serial_1_pins: serial1-pinmux {
  30 -                               pins = "gpio8", "gpio9",
  31 -                                       "gpio10", "gpio11";
  32 -                               function = "blsp_uart1";
  33 -                               bias-disable;
  34 +                               mux {
  35 +                                       pins = "gpio8", "gpio9";
  36 +                                       function = "blsp_uart1";
  37 +                                       bias-disable;
  38 +                               };
  39                         };
  40
  41                         spi_0_pins: spi-0-pinmux {
  42                                 pinmux {
  43                                         function = "blsp_spi0";
  44                                         pins = "gpio13", "gpio14", "gpio15";
  45 -                                       bias-disable;
  46                                 };
  47                                 pinmux_cs {
  48                                         function = "gpio";
  49                                         pins = "gpio12";
  50 +                               };
  51 +                               pinconf {
  52 +                                       pins = "gpio13", "gpio14", "gpio15";
  53 +                                       drive-strength = <12>;
  54 +                                       bias-disable;
  55 +                               };
  56 +                               pinconf_cs {
  57 +                                       pins = "gpio12";
  58 +                                       drive-strength = <2>;
  59                                         bias-disable;
  60                                         output-high;
  61                                 };
  62                         };
  63
  64                         i2c_0_pins: i2c-0-pinmux {
  65 -                               pins = "gpio20", "gpio21";
  66 -                               function = "blsp_i2c0";
  67 -                               bias-disable;
  68 +                               pinmux {
  69 +                                       function = "blsp_i2c0";
  70 +                                       pins = "gpio10", "gpio11";
  71 +                               };
  72 +                               pinconf {
  73 +                                       pins = "gpio10", "gpio11";
  74 +                                       drive-strength = <16>;
  75 +                                       bias-disable;
  76 +                               };
  77                         };
  78
  79                         nand_pins: nand-pins {
  80 -                               pins = "gpio53", "gpio55", "gpio56",
  81 -                                       "gpio57", "gpio58", "gpio59",
  82 -                                       "gpio60", "gpio62", "gpio63",
  83 -                                       "gpio64", "gpio65", "gpio66",
  84 -                                       "gpio67", "gpio68", "gpio69";
  85 -                               function = "qpic";
  86 +                               pullups {
  87 +                                       pins = "gpio52", "gpio53", "gpio58",
  88 +                                               "gpio59";
  89 +                                       function = "qpic";
  90 +                                       bias-pull-up;
  91 +                               };
  92 +
  93 +                               pulldowns {
  94 +                                       pins = "gpio54", "gpio55", "gpio56",
  95 +                                               "gpio57", "gpio60", "gpio61",
  96 +                                               "gpio62", "gpio63", "gpio64",
  97 +                                               "gpio65", "gpio66", "gpio67",
  98 +                                               "gpio68", "gpio69";
  99 +                                       function = "qpic";
 100 +                                       bias-pull-down;
 101 +                               };
 102                         };
 103                 };
 104
 105 @@ -89,11 +115,11 @@
 106                         status = "okay";
 107                         cs-gpios = <&tlmm 12 0>;
 108
 109 -                       m25p80@0 {
 110 +                       mx25l25635e@0 {
 111                                 #address-cells = <1>;
 112                                 #size-cells = <1>;
 113                                 reg = <0>;
 114 -                               compatible = "n25q128a11";
 115 +                               compatible = "mx25l25635e";
 116                                 spi-max-frequency = <24000000>;
 117                         };
 118                 };
 119 @@ -103,9 +129,48 @@
 120                         perst-gpio = <&tlmm 38 0x1>;
 121                 };
 122
 123 +               i2c0: i2c@78b7000 { /* BLSP1 QUP2 */
 124 +                       pinctrl-0 = <&i2c_0_pins>;
 125 +                       pinctrl-names = "default";
 126 +
 127 +                       status = "okay";
 128 +               };
 129 +
 130                 qpic-nand@79b0000 {
 131                         pinctrl-0 = <&nand_pins>;
 132                         pinctrl-names = "default";
 133                 };
 134 +
 135 +               usb3_ss_phy: ssphy@9a000 {
 136 +                       status = "okay";
 137 +               };
 138 +
 139 +               usb3_hs_phy: hsphy@a6000 {
 140 +                       status = "okay";
 141 +               };
 142 +
 143 +               usb3: usb3@8af8800 {
 144 +                       status = "okay";
 145 +               };
 146 +
 147 +               usb2_hs_phy: hsphy@a8000 {
 148 +                       status = "okay";
 149 +               };
 150 +
 151 +               usb2: usb2@60f8800 {
 152 +                       status = "okay";
 153 +               };
 154 +
 155 +               cryptobam: dma@8e04000 {
 156 +                       status = "okay";
 157 +               };
 158 +
 159 +               crypto@8e3a000 {
 160 +                       status = "okay";
 161 +               };
 162 +
 163 +               watchdog@b017000 {
 164 +                       status = "okay";
 165 +               };
 166         };
 167  };