target/linux/lantiq/dts/VG3503J.dtsi

   1 /include/ "vr9.dtsi"
   2
   3 / {
   4         model = "VG3503J - BT OpenReach VDSL Modem";
   5
   6         chosen {
   7                 bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
   8
   9                 leds {
  10                         boot = &power;
  11                         failsafe = &power2;
  12                         running = &power;
  13
  14                         internet = &dsl;
  15                 };
  16         };
  17
  18         memory@0 {
  19                 reg = <0x0 0x2000000>;
  20         };
  21
  22         fpi@10000000 {
  23                 localbus@0 {
  24                         ranges = <0 0 0x0 0x3ffffff>;
  25                         nor-boot@0 {
  26                                 compatible = "lantiq,nor";
  27                                 bank-width = <2>;
  28                                 reg = <0 0x0 0x2000000>;
  29                                 #address-cells = <1>;
  30                                 #size-cells = <1>;
  31
  32                                 partition@0 {
  33                                         label = "uboot";
  34                                         reg = <0x00000 0x20000>;
  35                                 };
  36
  37                                 partition@20000 {
  38                                         label = "kernel";
  39                                         reg = <0x20000 0x300000>;
  40                                 };
  41
  42                                 partition@1a0000 {
  43                                         label = "rootfs";
  44                                         reg = <0x320000 0x420000>;
  45                                 };
  46
  47                                 partition@740000 {
  48                                         label = "btagent";
  49                                         reg = <0x740000 0x80000>;
  50                                 };
  51
  52                                 partition@7c0000 {
  53                                         label = "pri_bfocus_cfg";
  54                                         reg = <0x7c0000 0x10000>;
  55                                 };
  56
  57                                 partition@7d0000 {
  58                                         label = "sec_bfocus_cfg";
  59                                         reg = <0x7d0000 0x10000>;
  60                                 };
  61
  62                                 partition@7e0000 {
  63                                         label = "sysconfig";
  64                                         reg = <0x7e0000 0x10000>;
  65                                 };
  66
  67                                 partition@7f0000 {
  68                                         label = "misc_cfg";
  69                                         reg = <0x7f0000 0x10000>;
  70                                 };
  71                         };
  72                 };
  73
  74                 gpio: pinmux@E100B10 {
  75                         pinctrl-names = "default";
  76                         pinctrl-0 = <&state_default>;
  77
  78                         state_default: pinmux {
  79                                 mdio {
  80                                         lantiq,groups = "mdio";
  81                                         lantiq,function = "mdio";
  82                                 };
  83                                 gphy-leds {
  84                                         lantiq,groups = "gphy0 led0", "gphy0 led1",
  85                                                         "gphy0 led2", "gphy1 led0",
  86                                                         "gphy1 led1", "gphy1 led2";
  87                                         lantiq,function = "gphy";
  88                                         lantiq,pull = <2>;
  89                                         lantiq,open-drain = <0>;
  90                                         lantiq,output = <1>;
  91                                 };
  92                         };
  93                 };
  94
  95                 eth@E108000 {
  96                         #address-cells = <1>;
  97                         #size-cells = <0>;
  98                         compatible = "lantiq,xrx200-net";
  99                         reg = < 0xE108000 0x3000 /* switch */
 100                                 0xE10B100 0x70 /* mdio */
 101                                 0xE10B1D8 0x30 /* mii */
 102                                 0xE10B308 0x30 /* pmac */
 103                         >;
 104                         interrupt-parent = <&icu0>;
 105                         interrupts = <73 72>;
 106
 107                         interface@0 {
 108                                 compatible = "lantiq,xrx200-pdi";
 109                                 #address-cells = <1>;
 110                                 #size-cells = <0>;
 111                                 reg = <0>;
 112                                 mac-address = [ 00 11 22 33 44 55 ];
 113                                 lantiq,switch;
 114                                 ethernet@2 {
 115                                         compatible = "lantiq,xrx200-pdi-port";
 116                                         reg = <2>;
 117                                         phy-mode = "mii";
 118                                         phy-handle = <&phy11>;
 119                                 };
 120                                 ethernet@4 {
 121                                         compatible = "lantiq,xrx200-pdi-port";
 122                                         reg = <4>;
 123                                         phy-mode = "mii";
 124                                         phy-handle = <&phy13>;
 125                                 };
 126                         };
 127
 128                         mdio@0 {
 129                                 #address-cells = <1>;
 130                                 #size-cells = <0>;
 131                                 compatible = "lantiq,xrx200-mdio";
 132                                 phy11: ethernet-phy@11 {
 133                                         reg = <0x11>;
 134                                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 135                                 };
 136                                 phy13: ethernet-phy@13 {
 137                                         reg = <0x13>;
 138                                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 139                                 };
 140                         };
 141                 };
 142         };
 143
 144         gpio-keys-polled {
 145                 compatible = "gpio-keys-polled";
 146                 #address-cells = <1>;
 147                 #size-cells = <0>;
 148                 poll-interval = <100>;
 149                 reset {
 150                         label = "reset";
 151                         gpios = <&gpio 6 1>;
 152                         linux,code = <0x198>;
 153                 };
 154         };
 155
 156         gpio-leds {
 157                 compatible = "gpio-leds";
 158
 159                 power2: power2 {
 160                         label = "power2";
 161                         gpios = <&gpio 14 1>;
 162                 };
 163                 dsl: dsl {
 164                         label = "bt:green:dsl";
 165                         gpios = <&gpio 19 1>;
 166                 };
 167                 power: power {
 168                         label = "power";
 169                         gpios = <&gpio 28 1>;
 170                         default-state = "keep";
 171                 };
 172         };
 173 };