target/linux/mvebu/files-4.19/arch/arm64/boot/dts/marvell/armada-3720-gl-mv1000.dts

   1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
   2
   3 /dts-v1/;
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include "armada-372x.dtsi"
   6
   7 / {
   8         model = "GL.iNet GL-MV1000";
   9         compatible = "glinet,gl-mv1000", "marvell,armada3720";
  10
  11         chosen {
  12                 stdout-path = "serial0:115200n8";
  13         };
  14
  15         memory@0 {
  16                 device_type = "memory";
  17                 reg = <0x00000000 0x00000000 0x00000000 0x20000000>;
  18         };
  19
  20         vcc_sd_reg1: regulator {
  21                 compatible = "regulator-gpio";
  22                 regulator-name = "vcc_sd1";
  23                 regulator-min-microvolt = <1800000>;
  24                 regulator-max-microvolt = <3300000>;
  25                 regulator-boot-on;
  26
  27                 gpios-states = <0>;
  28                 states = <1800000 0x1
  29                         3300000 0x0>;
  30                 enable-active-high;
  31         };
  32 };
  33
  34 &spi0 {
  35         status = "okay";
  36
  37         flash@0 {
  38                 reg = <0>;
  39                 compatible = "jedec,spi-nor";
  40                 spi-max-frequency = <104000000>;
  41                 m25p,fast-read;
  42                 partitions {
  43                         compatible = "fixed-partitions";
  44                         #address-cells = <1>;
  45                         #size-cells = <1>;
  46
  47                         partition@0 {
  48                                 label = "u-boot";
  49                                 reg = <0 0xf0000>;
  50                         };
  51
  52                         partition@f0000 {
  53                                 label = "u-boot-env";
  54                                 reg = <0Xf0000 0x8000>;
  55                         };
  56
  57                         factory: partition@f8000 {
  58                                 label = "factory";
  59                                 reg = <0xf8000 0x8000>;
  60                         };
  61                 };
  62         };
  63 };
  64
  65 &sdhci1 {
  66         wp-inverted;
  67         bus-width = <4>;
  68         cd-gpios = <&gpionb 17 GPIO_ACTIVE_LOW>;
  69         marvell,pad-type = "sd";
  70         no-1-8-v;
  71         vqmmc-supply = <&vcc_sd_reg1>;
  72         status = "okay";
  73 };
  74
  75 &sdhci0 {
  76         bus-width = <8>;
  77         mmc-ddr-1_8v;
  78         mmc-hs400-1_8v;
  79         non-removable;
  80         no-sd;
  81         no-sdio;
  82         marvell,pad-type = "fixed-1-8v";
  83         status = "okay";
  84 };
  85
  86 &usb3 {
  87         status = "okay";
  88 };
  89
  90 &usb2 {
  91         status = "okay";
  92 };
  93
  94 &uart0 {
  95         status = "okay";
  96 };
  97
  98 &mdio {
  99         switch0: switch0@1 {
 100                 compatible = "marvell,mv88e6085";
 101                 #address-cells = <1>;
 102                 #size-cells = <0>;
 103                 reg = <1>;
 104
 105                 dsa,member = <0 0>;
 106
 107                 ports: ports {
 108                         #address-cells = <1>;
 109                         #size-cells = <0>;
 110
 111                         port@0 {
 112                                 reg = <0>;
 113                                 label = "cpu";
 114                                 ethernet = <&eth0>;
 115                         };
 116
 117                         port@1 {
 118                                 reg = <1>;
 119                                 label = "wan";
 120                                 phy-handle = <&switch0phy0>;
 121                         };
 122
 123                         port@2 {
 124                                 reg = <2>;
 125                                 label = "lan0";
 126                                 phy-handle = <&switch0phy1>;
 127                         };
 128
 129                         port@3 {
 130                                 reg = <3>;
 131                                 label = "lan1";
 132                                 phy-handle = <&switch0phy2>;
 133                         };
 134                 };
 135
 136                 mdio {
 137                         #address-cells = <1>;
 138                         #size-cells = <0>;
 139
 140                         switch0phy0: switch0phy0@11 {
 141                                 reg = <0x11>;
 142                         };
 143                         switch0phy1: switch0phy1@12 {
 144                                 reg = <0x12>;
 145                         };
 146                         switch0phy2: switch0phy2@13 {
 147                                 reg = <0x13>;
 148                         };
 149                 };
 150         };
 151 };
 152
 153 &eth0 {
 154         mtd-mac-address = <&factory 0x0>;
 155         phy-mode = "rgmii-id";
 156         status = "okay";
 157
 158         fixed-link {
 159                 speed = <1000>;
 160                 full-duplex;
 161         };
 162 };