target/linux/ramips/dts/MIWIFI-NANO.dts

   1 /dts-v1/;
   2
   3 #include "mt7628an.dtsi"
   4
   5 / {
   6         compatible = "xiaomi,MiWifi Nano", "mediatek,mt7628an-soc";
   7         model = "MiWiFi Nano";
   8
   9         chosen {
  10                 bootargs = "console=ttyS0,115200";
  11         };
  12
  13         memory@0 {
  14                 device_type = "memory";
  15                 reg = <0x0 0x4000000>;
  16         };
  17
  18         gpio-leds {
  19                 compatible = "gpio-leds";
  20
  21                 wifi {
  22                         label = "miwifi-nano:blue:wifi";
  23                         gpios = <&gpio0 11 1>;
  24                         default-state = "1";
  25                 };
  26                 status {
  27                         label = "miwifi-nano:red:status";
  28                         gpios = <&gpio1 5 1>;
  29                         default-state = "on";
  30                 };
  31                 radio {
  32                         label = "miwifi-nano:amber:radio";
  33                         gpios = <&gpio1 12 1>;
  34                         default-state = "1";
  35                 };
  36         };
  37 };
  38
  39 &pinctrl {
  40         state_default: pinctrl0 {
  41                 gpio {
  42                         ralink,group = "refclk", "wled_an", "gpio";
  43                         ralink,function = "gpio";
  44                 };
  45         };
  46 };
  47
  48 &wmac {
  49         status = "okay";
  50 };
  51
  52 &spi0 {
  53         status = "okay";
  54
  55         m25p80@0 {
  56                 #address-cells = <1>;
  57                 #size-cells = <1>;
  58                 compatible = "jedec,spi-nor";
  59                 reg = <0>;
  60                 linux,modalias = "m25p80";
  61                 spi-max-frequency = <10000000>;
  62                 m25p,chunked-io = <32>;
  63
  64                 partition@0 {
  65                         label = "u-boot";
  66                         reg = <0x0 0x30000>;
  67                         read-only;
  68                 };
  69
  70                 partition@30000 {
  71                         label = "u-boot-env";
  72                         reg = <0x30000 0x10000>;
  73                         read-only;
  74                 };
  75
  76                 factory: partition@40000 {
  77                         label = "factory";
  78                         reg = <0x40000 0x10000>;
  79                         read-only;
  80                 };
  81
  82                 partition@50000 {
  83                         label = "firmware";
  84                         reg = <0x50000 0x7b0000>;
  85                 };
  86         };
  87 };