target/linux/ramips/dts/ZBT-APE522II.dts

   1 /dts-v1/;
   2
   3 #include "mt7620a.dtsi"
   4
   5 / {
   6         compatible = "zbtlink,zbt-ape522ii", "ralink,mt7620a-soc";
   7         model = "ZBT-APE522II";
   8
   9         chosen {
  10                 bootargs = "console=ttyS0,115200";
  11         };
  12
  13         gpio-leds {
  14                 compatible = "gpio-leds";
  15
  16                 sys1 {
  17                         label = "zbt-ape522ii:green:sys1";
  18                         gpios = <&gpio0 11 1>;
  19                 };
  20
  21                 sys2 {
  22                         label = "zbt-ape522ii:green:sys2";
  23                         gpios = <&gpio0 12 1>;
  24                 };
  25
  26                 sys3 {
  27                         label = "zbt-ape522ii:green:sys3";
  28                         gpios = <&gpio0 9 1>;
  29                 };
  30
  31                 sys4 {
  32                         label = "zbt-ape522ii:green:sys4";
  33                         gpios = <&gpio0 14 1>;
  34                 };
  35
  36                 wlan2g4 {
  37                         label = "zbt-ape522ii:green:wlan2g4";
  38                         gpios = <&gpio3 0 1>;
  39                 };
  40         };
  41
  42         gpio-keys-polled {
  43                 compatible = "gpio-keys-polled";
  44                 #address-cells = <1>;
  45                 #size-cells = <0>;
  46                 poll-interval = <20>;
  47
  48                 reset {
  49                         label = "reset";
  50                         gpios = <&gpio0 2 0>;
  51                         linux,code = <0x198>;
  52                 };
  53         };
  54 };
  55
  56 &gpio0 {
  57         status = "okay";
  58 };
  59
  60 &gpio1 {
  61         status = "okay";
  62 };
  63
  64 &gpio2 {
  65         status = "okay";
  66 };
  67
  68 &gpio3 {
  69         status = "okay";
  70 };
  71
  72 &spi0 {
  73         status = "okay";
  74
  75         m25p80@0 {
  76                 #address-cells = <1>;
  77                 #size-cells = <1>;
  78                 compatible = "jedec,spi-nor";
  79                 reg = <0>;
  80                 linux,modalias = "m25p80", "w25q64";
  81                 spi-max-frequency = <10000000>;
  82
  83                 partition@0 {
  84                         label = "u-boot";
  85                         reg = <0x0 0x30000>;
  86                 };
  87
  88                 partition@30000 {
  89                         label = "u-boot-env";
  90                         reg = <0x30000 0x10000>;
  91                         read-only;
  92                 };
  93
  94                 factory: partition@40000 {
  95                         label = "factory";
  96                         reg = <0x40000 0x10000>;
  97                         read-only;
  98                 };
  99
 100                 partition@50000 {
 101                         label = "firmware";
 102                         reg = <0x50000 0xf80000>;
 103                 };
 104         };
 105 };
 106
 107 &ethernet {
 108         pinctrl-names = "default";
 109         pinctrl-0 = <&ephy_pins>;
 110         mtd-mac-address = <&factory 0x4>;
 111         mediatek,portmap = "wllll";
 112 };
 113
 114 &wmac {
 115         ralink,mtd-eeprom = <&factory 0>;
 116 };
 117
 118 &pcie {
 119         status = "okay";
 120
 121         pcie-bridge {
 122                 mt76@0,0 {
 123                         reg = <0x0000 0 0 0 0>;
 124                         device_type = "pci";
 125                         mediatek,mtd-eeprom = <&factory 0x8000>;
 126                         mediatek,2ghz = <0>;
 127                 };
 128         };
 129 };
 130
 131 &pinctrl {
 132         state_default: pinctrl0 {
 133                 gpio {
 134                         ralink,group = "wled", "i2c", "uartf", "wdt";
 135                         ralink,function = "gpio";
 136                 };
 137
 138                 pa {
 139                         ralink,group = "pa";
 140                         ralink,function = "pa";
 141                 };
 142         };
 143 };