ar71xx: add kernel support for Atheros AP132 Reference Board
authorGabor Juhos <juhosg@openwrt.org>
Tue, 29 Jan 2013 19:12:30 +0000 (19:12 +0000)
committerGabor Juhos <juhosg@openwrt.org>
Tue, 29 Jan 2013 19:12:30 +0000 (19:12 +0000)
Based on http://patchwork.openwrt.org/patch/3162/

Signed-off-by: Embedded Wireless GmbH <info at embeddedwireless.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35395

target/linux/ar71xx/config-3.7
target/linux/ar71xx/files/arch/mips/ath79/mach-ap132.c [new file with mode: 0644]
target/linux/ar71xx/patches-3.7/611-MIPS-ath79-add-QCA9556-SoC-on-AP132.patch [new file with mode: 0644]

index 713149b097ad07ee49b9d9914b00a808cf8672ba..e396dfbe00327a409fe2e82c0f7564b6d063c619 100644 (file)
@@ -28,6 +28,7 @@ CONFIG_ATH79_MACH_ALL0258N=y
 CONFIG_ATH79_MACH_ALL0315N=y
 CONFIG_ATH79_MACH_AP113=y
 CONFIG_ATH79_MACH_AP121=y
+CONFIG_ATH79_MACH_AP132=y
 CONFIG_ATH79_MACH_AP136=y
 CONFIG_ATH79_MACH_AP81=y
 CONFIG_ATH79_MACH_AP83=y
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-ap132.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-ap132.c
new file mode 100644 (file)
index 0000000..86fd8bd
--- /dev/null
@@ -0,0 +1,189 @@
+/*
+ * Atheros AP132 reference board support
+ *
+ * Copyright (c) 2012 Qualcomm Atheros
+ * Copyright (c) 2012 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (c) 2013 Embedded Wireless GmbH <info@embeddedwireless.de>
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <linux/ar8216_platform.h>
+
+#include <asm/mach-ath79/ar71xx_regs.h>
+
+#include "common.h"
+#include "dev-ap9x-pci.h"
+#include "dev-gpio-buttons.h"
+#include "dev-eth.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-usb.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+
+#define AP132_GPIO_LED_USB             4
+#define AP132_GPIO_LED_WLAN_5G         12
+#define AP132_GPIO_LED_WLAN_2G         13
+#define AP132_GPIO_LED_STATUS_RED      14
+#define AP132_GPIO_LED_WPS_RED         15
+
+#define AP132_GPIO_BTN_WPS             16
+
+#define AP132_KEYS_POLL_INTERVAL       20      /* msecs */
+#define AP132_KEYS_DEBOUNCE_INTERVAL   (3 * AP132_KEYS_POLL_INTERVAL)
+
+#define AP132_MAC0_OFFSET              0
+#define AP132_WMAC_CALDATA_OFFSET      0x1000
+
+static struct gpio_led ap132_leds_gpio[] __initdata = {
+       {
+               .name           = "ap132:red:status",
+               .gpio           = AP132_GPIO_LED_STATUS_RED,
+               .active_low     = 1,
+       },
+       {
+               .name           = "ap132:red:wps",
+               .gpio           = AP132_GPIO_LED_WPS_RED,
+               .active_low     = 1,
+       },
+       {
+               .name           = "ap132:red:wlan-2g",
+               .gpio           = AP132_GPIO_LED_WLAN_2G,
+               .active_low     = 1,
+       },
+       {
+               .name           = "ap132:red:usb",
+               .gpio           = AP132_GPIO_LED_USB,
+               .active_low     = 1,
+       }
+};
+
+static struct gpio_keys_button ap132_gpio_keys[] __initdata = {
+       {
+               .desc           = "WPS button",
+               .type           = EV_KEY,
+               .code           = KEY_WPS_BUTTON,
+               .debounce_interval = AP132_KEYS_DEBOUNCE_INTERVAL,
+               .gpio           = AP132_GPIO_BTN_WPS,
+               .active_low     = 1,
+       },
+};
+
+static struct ar8327_pad_cfg ap132_ar8327_pad0_cfg;
+
+static struct ar8327_platform_data ap132_ar8327_data = {
+       .pad0_cfg = &ap132_ar8327_pad0_cfg,
+       .port0_cfg = {
+               .force_link = 1,
+               .speed = AR8327_PORT_SPEED_1000,
+               .duplex = 1,
+               .txpause = 1,
+               .rxpause = 1,
+       },
+};
+
+static struct mdio_board_info ap132_mdio1_info[] = {
+       {
+               .bus_id = "ag71xx-mdio.1",
+               .phy_addr = 0,
+               .platform_data = &ap132_ar8327_data,
+       },
+};
+
+static void __init ap132_mdio_setup(void)
+{
+       void __iomem *base;
+       u32 t;
+
+#define GPIO_IN_ENABLE3_ADDRESS                                      0x0050
+#define GPIO_IN_ENABLE3_MII_GE1_MDI_MASK                             0x00ff0000
+#define GPIO_IN_ENABLE3_MII_GE1_MDI_LSB                              16
+#define GPIO_IN_ENABLE3_MII_GE1_MDI_SET(x)                           (((x) << GPIO_IN_ENABLE3_MII_GE1_MDI_LSB) & GPIO_IN_ENABLE3_MII_GE1_MDI_MASK)
+#define GPIO_OUT_FUNCTION4_ADDRESS                                   0x003c
+#define GPIO_OUT_FUNCTION4_ENABLE_GPIO_19_MASK                       0xff000000
+#define GPIO_OUT_FUNCTION4_ENABLE_GPIO_19_LSB                        24
+#define GPIO_OUT_FUNCTION4_ENABLE_GPIO_19_SET(x)                     (((x) << GPIO_OUT_FUNCTION4_ENABLE_GPIO_19_LSB) & GPIO_OUT_FUNCTION4_ENABLE_GPIO_19_MASK)
+#define GPIO_OUT_FUNCTION4_ENABLE_GPIO_17_MASK                       0x0000ff00
+#define GPIO_OUT_FUNCTION4_ENABLE_GPIO_17_LSB                        8
+#define GPIO_OUT_FUNCTION4_ENABLE_GPIO_17_SET(x)                     (((x) << GPIO_OUT_FUNCTION4_ENABLE_GPIO_17_LSB) & GPIO_OUT_FUNCTION4_ENABLE_GPIO_17_MASK)
+
+       base = ioremap(AR71XX_GPIO_BASE, AR71XX_GPIO_SIZE);
+
+       t = __raw_readl(base + GPIO_IN_ENABLE3_ADDRESS);
+       t &= ~GPIO_IN_ENABLE3_MII_GE1_MDI_MASK;
+       t |= GPIO_IN_ENABLE3_MII_GE1_MDI_SET(19);
+       __raw_writel(t, base + GPIO_IN_ENABLE3_ADDRESS);
+
+
+       __raw_writel(__raw_readl(base + AR71XX_GPIO_REG_OE) & ~(1 << 19), base + AR71XX_GPIO_REG_OE);
+
+       __raw_writel(__raw_readl(base + AR71XX_GPIO_REG_OE) & ~(1 << 17), base + AR71XX_GPIO_REG_OE);
+
+
+       t = __raw_readl(base + GPIO_OUT_FUNCTION4_ADDRESS);
+       t &= ~(GPIO_OUT_FUNCTION4_ENABLE_GPIO_19_MASK | GPIO_OUT_FUNCTION4_ENABLE_GPIO_17_MASK);
+       t |= GPIO_OUT_FUNCTION4_ENABLE_GPIO_19_SET(0x20) | GPIO_OUT_FUNCTION4_ENABLE_GPIO_17_SET(0x21);
+       __raw_writel(t, base + GPIO_OUT_FUNCTION4_ADDRESS);
+
+       iounmap(base);
+
+}
+
+static void __init ap132_setup(void)
+{
+       u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
+
+       ath79_register_m25p80(NULL);
+
+       ath79_register_leds_gpio(-1, ARRAY_SIZE(ap132_leds_gpio),
+                                ap132_leds_gpio);
+       ath79_register_gpio_keys_polled(-1, AP132_KEYS_POLL_INTERVAL,
+                                       ARRAY_SIZE(ap132_gpio_keys),
+                                       ap132_gpio_keys);
+
+       ath79_register_usb();
+
+       ath79_register_wmac(art + AP132_WMAC_CALDATA_OFFSET, NULL);
+
+       /* GMAC0 of the AR8327 switch is connected to GMAC1 via SGMII */
+       ap132_ar8327_pad0_cfg.mode = AR8327_PAD_MAC_SGMII;
+       ap132_ar8327_pad0_cfg.sgmii_delay_en = true;
+
+       ath79_eth1_pll_data.pll_1000 = 0x03000101;
+
+       ap132_mdio_setup();
+
+       ath79_register_mdio(1, 0x0);
+
+       ath79_init_mac(ath79_eth1_data.mac_addr, art + AP132_MAC0_OFFSET, 0);
+
+       mdiobus_register_board_info(ap132_mdio1_info,
+                                   ARRAY_SIZE(ap132_mdio1_info));
+
+       /* GMAC1 is connected to the SGMII interface */
+       ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII;
+       ath79_eth1_data.speed = SPEED_1000;
+       ath79_eth1_data.duplex = DUPLEX_FULL;
+       ath79_eth1_data.phy_mask = BIT(0);
+       ath79_eth1_data.mii_bus_dev = &ath79_mdio1_device.dev;
+
+       ath79_register_eth(1);
+}
+
+MIPS_MACHINE(ATH79_MACH_AP132, "AP132",
+            "Atheros AP132 reference board",
+            ap132_setup);
+
diff --git a/target/linux/ar71xx/patches-3.7/611-MIPS-ath79-add-QCA9556-SoC-on-AP132.patch b/target/linux/ar71xx/patches-3.7/611-MIPS-ath79-add-QCA9556-SoC-on-AP132.patch
new file mode 100644 (file)
index 0000000..8479ea3
--- /dev/null
@@ -0,0 +1,41 @@
+--- a/arch/mips/ath79/Kconfig
++++ b/arch/mips/ath79/Kconfig
+@@ -70,6 +70,18 @@ config ATH79_MACH_AP121
+         Say 'Y' here if you want your kernel to support the
+         Atheros AP121 reference board.
++config ATH79_MACH_AP132
++      bool "Atheros AP132 reference board"
++      select SOC_QCA955X
++      select ATH79_DEV_GPIO_BUTTONS
++      select ATH79_DEV_LEDS_GPIO
++      select ATH79_DEV_SPI
++      select ATH79_DEV_USB
++      select ATH79_DEV_WMAC
++      help
++        Say 'Y' here if you want your kernel to support the
++        Atheros AP132 reference boards.
++
+ config ATH79_MACH_AP136
+       bool "Atheros AP136/AP135 reference board"
+       select SOC_QCA955X
+--- a/arch/mips/ath79/machtypes.h
++++ b/arch/mips/ath79/machtypes.h
+@@ -24,6 +24,7 @@ enum ath79_mach_type {
+       ATH79_MACH_AP113,               /* Atheros AP113 reference board */
+       ATH79_MACH_AP121,               /* Atheros AP121 reference board */
+       ATH79_MACH_AP121_MINI,          /* Atheros AP121-MINI reference board */
++      ATH79_MACH_AP132,               /* Atheros AP132 reference board */
+       ATH79_MACH_AP135_020,           /* Atheros AP135-020 reference board */
+       ATH79_MACH_AP136_010,           /* Atheros AP136-010 reference board */
+       ATH79_MACH_AP136_020,           /* Atheros AP136-020 reference board */
+--- a/arch/mips/ath79/Makefile
++++ b/arch/mips/ath79/Makefile
+@@ -44,6 +44,7 @@ obj-$(CONFIG_ATH79_MACH_ALL0258N)    += mac
+ obj-$(CONFIG_ATH79_MACH_ALL0315N)     += mach-all0315n.o
+ obj-$(CONFIG_ATH79_MACH_AP113)                += mach-ap113.o
+ obj-$(CONFIG_ATH79_MACH_AP121)                += mach-ap121.o
++obj-$(CONFIG_ATH79_MACH_AP132)                += mach-ap132.o
+ obj-$(CONFIG_ATH79_MACH_AP136)                += mach-ap136.o
+ obj-$(CONFIG_ATH79_MACH_AP81)         += mach-ap81.o
+ obj-$(CONFIG_ATH79_MACH_AP83)         += mach-ap83.o