tqma9263: update board definition for 3.x series and fix config choose

SVN-Revision: 31436

diff --git a/target/linux/at91/9263/config-default b/target/linux/at91/9263/config-default
index 70ee3adc6d0e4c4181a2812e1a2857c9a89622b7..15ec97c87eb4fd59c7e8d106b07107f032a80702 100644 (file)
--- a/target/linux/at91/9263/config-default
+++ b/target/linux/at91/9263/config-default
@@ -18,5 +18,4 @@ CONFIG_MTD_NAND_ATMEL_ECC_HW=y
 CONFIG_MTD_NAND_ECC=y
 # CONFIG_MTD_SM_COMMON is not set
 # CONFIG_USB_FUNCTIONFS is not set
-# CONFIG_USB_G_HID is not set
-# CONFIG_USB_G_WEBCAM is not set
+CONFIG_AT91_EARLY_DBGU1=y

diff --git a/target/linux/at91/config-default b/target/linux/at91/config-default
index fe79340477989fbf8697a72bbde3e521bb07cb81..c1e754f2ca885c4afceb216b2772cf6b8e1489a5 100644 (file)
--- a/target/linux/at91/config-default
+++ b/target/linux/at91/config-default
@@ -6,7 +6,7 @@ CONFIG_ARCH_AT91=y
 # CONFIG_ARCH_AT91SAM9261 is not set
 # CONFIG_ARCH_AT91SAM9263 is not set
 # CONFIG_ARCH_AT91SAM9G10 is not set
-CONFIG_ARCH_AT91SAM9G20=y
+# CONFIG_ARCH_AT91SAM9G20 is not set
 # CONFIG_ARCH_AT91SAM9G45 is not set
 # CONFIG_ARCH_AT91SAM9RL is not set
 # CONFIG_ARCH_AT91X40 is not set

diff --git a/target/linux/at91/files/arch/arm/mach-at91/board-tqma9263.c b/target/linux/at91/files/arch/arm/mach-at91/board-tqma9263.c
index 1f0c2fd492b97eb5339ff2faa9631b8336def1e4..cae1fe9359bf300fbfb085daad819ed6704fbfe6 100644 (file)
--- a/target/linux/at91/files/arch/arm/mach-at91/board-tqma9263.c
+++ b/target/linux/at91/files/arch/arm/mach-at91/board-tqma9263.c
@@ -51,7 +51,7 @@ static void __init tqma9263_map_io(void)
        unsigned pins;
 
        /* Initialize processor: 18.432 MHz crystal */
-       at91sam9263_initialize(18432000);
+       at91_initialize(18432000);
 
        /* DGBU on ttyS0. (Rx & Tx only) */
        at91_register_uart(0, 0, 0);
@@ -75,19 +75,13 @@ static void __init tqma9263_map_io(void)
 }
 
 
-static void __init tqma9263_init_irq(void)
-{
-       at91sam9263_init_interrupts(NULL);
-}
-
-
 /*
  * USB Host port
  */
 static struct at91_usbh_data __initdata tqma9263_usbh_data = {
        .ports                  = 2,
        .vbus_pin               = { AT91_PIN_PA24, AT91_PIN_PA21 },
-       .vbus_active_high       = 1,
+       .vbus_pin_active_low    = 0,
 };
 
 
@@ -113,7 +107,7 @@ static struct at91_mmc_data __initdata tqma9263_mmc_data = {
 /*
  * MACB Ethernet device
  */
-static struct at91_eth_data __initdata tqma9263_macb_data = {
+static struct macb_platform_data __initdata tqma9263_macb_data = {
        .phy_irq_pin    = AT91_PIN_PE31,
        .is_rmii        = 1,
 };
@@ -169,7 +163,6 @@ static struct atmel_nand_data __initdata tqma9263_nand_data = {
        .cle                    = 22,
        .rdy_pin                = AT91_PIN_PD14,
        .enable_pin             = AT91_PIN_PD15,
-       .partition_info         = nand_partitions,
 };
 
 static struct sam9_smc_config __initdata tqma9263_nand_smc_config = {
@@ -193,7 +186,7 @@ static struct sam9_smc_config __initdata tqma9263_nand_smc_config = {
 static void __init tqma9263_add_device_nand(void)
 {
        /* configure chip-select 3 (NAND) */
-       sam9_smc_configure(3, &tqma9263_nand_smc_config);
+       sam9_smc_configure(0, 3, &tqma9263_nand_smc_config);
 
        at91_add_device_nand(&tqma9263_nand_data);
 }
@@ -219,11 +212,8 @@ static void __init tqma9263_board_init(void)
 
 MACHINE_START(TQMA9263, "TQ Components TQMa9263")
        /* Maintainer: Michael Heimpold */
-       .phys_io        = AT91_BASE_SYS,
-       .io_pg_offst    = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
-       .boot_params    = AT91_SDRAM_BASE + 0x100,
        .timer          = &at91sam926x_timer,
        .map_io         = tqma9263_map_io,
-       .init_irq       = tqma9263_init_irq,
+       .init_irq       = at91_init_irq_default,
        .init_machine   = tqma9263_board_init,
 MACHINE_END