mac80211: update to wireless-testing 2014-11-04
authorFelix Fietkau <nbd@openwrt.org>
Fri, 7 Nov 2014 19:41:07 +0000 (19:41 +0000)
committerFelix Fietkau <nbd@openwrt.org>
Fri, 7 Nov 2014 19:41:07 +0000 (19:41 +0000)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43210

72 files changed:
package/kernel/mac80211/Makefile
package/kernel/mac80211/patches/008-fix_netdev_unregister.patch
package/kernel/mac80211/patches/060-no_local_ssb_bcma.patch
package/kernel/mac80211/patches/100-revert_aes_ccm_port.patch
package/kernel/mac80211/patches/110-mac80211_keep_keys_on_stop_ap.patch
package/kernel/mac80211/patches/150-disable_addr_notifier.patch
package/kernel/mac80211/patches/210-ap_scan.patch
package/kernel/mac80211/patches/302-ath9k-add-support-for-reporting-tx-power-to-mac80211.patch [new file with mode: 0644]
package/kernel/mac80211/patches/302-mac80211-trivial-fix-typo-in-starting-baserate-for-r.patch [deleted file]
package/kernel/mac80211/patches/303-ath10k-add-SURVEY_INFO_IN_USE-for-current-channel-on.patch [new file with mode: 0644]
package/kernel/mac80211/patches/303-ath9k-Use-sta_state-callback.patch [deleted file]
package/kernel/mac80211/patches/304-ath9k-Enable-multi-channel-properly.patch [deleted file]
package/kernel/mac80211/patches/304-ath9k-Fix-RTC_DERIVED_CLK-usage.patch [new file with mode: 0644]
package/kernel/mac80211/patches/305-ath9k-Process-beacons-properly.patch [deleted file]
package/kernel/mac80211/patches/305-b43-fix-NULL-pointer-dereference-in-b43_phy_copy.patch [new file with mode: 0644]
package/kernel/mac80211/patches/306-ath9k-Unify-reset-API.patch [deleted file]
package/kernel/mac80211/patches/306-ath9k-fix-misc-debugfs-when-not-using-chan-context.patch [new file with mode: 0644]
package/kernel/mac80211/patches/307-ath9k-Set-ATH_OP_HW_RESET-before-HW-reset.patch [deleted file]
package/kernel/mac80211/patches/307-ath9k-fix-regression-in-bssidmask-calculation.patch [new file with mode: 0644]
package/kernel/mac80211/patches/308-ath9k-Disable-beacon-tasklet-during-reset.patch [deleted file]
package/kernel/mac80211/patches/308-rt2x00-do-not-align-payload-on-modern-H-W.patch [new file with mode: 0644]
package/kernel/mac80211/patches/309-ath9k-Clear-NoA-schedule-properly.patch [deleted file]
package/kernel/mac80211/patches/310-ath9k-Use-configurable-timeout-for-flush.patch [deleted file]
package/kernel/mac80211/patches/311-ath9k-Fix-MCC-flush-timeout.patch [deleted file]
package/kernel/mac80211/patches/312-ath9k-Fix-offchannel-flush-timeout.patch [deleted file]
package/kernel/mac80211/patches/313-ath9k-Check-for-pending-frames-properly.patch [deleted file]
package/kernel/mac80211/patches/314-ath9k-Send-AUTHORIZED-event-only-for-station-mode.patch [deleted file]
package/kernel/mac80211/patches/315-ath9k-Fix-address-management.patch [deleted file]
package/kernel/mac80211/patches/316-ath9k-Add-a-function-to-check-for-an-active-GO.patch [deleted file]
package/kernel/mac80211/patches/317-ath9k-Check-for-active-GO-in-mgd_prepare_tx.patch [deleted file]
package/kernel/mac80211/patches/318-ath9k-Use-a-helper-function-for-offchannel-NoA.patch [deleted file]
package/kernel/mac80211/patches/319-ath9k-Use-a-helper-function-to-set-NoA.patch [deleted file]
package/kernel/mac80211/patches/320-ath9k-Use-a-helper-function-for-bmiss.patch [deleted file]
package/kernel/mac80211/patches/321-ath9k-Fix-RoC-expiration.patch [deleted file]
package/kernel/mac80211/patches/322-ath9k-Send-oneshot-NoA.patch [deleted file]
package/kernel/mac80211/patches/323-ath9k-Fix-HW-scan-abort.patch [deleted file]
package/kernel/mac80211/patches/324-ath9k-Improve-flush-in-mcc-mode.patch [deleted file]
package/kernel/mac80211/patches/325-ath9k-Do-not-start-BA-when-scanning.patch [deleted file]
package/kernel/mac80211/patches/326-ath9k_hw-make-support-for-PC-OEM-cards-optional.patch [deleted file]
package/kernel/mac80211/patches/327-ath9k_hw-remove-support-for-UB124-tx-gain-table.patch [deleted file]
package/kernel/mac80211/patches/328-ath9k-fix-processing-RXORN-interrupts.patch [deleted file]
package/kernel/mac80211/patches/329-ath9k-clean-up-debugfs-print-of-reset-causes.patch [deleted file]
package/kernel/mac80211/patches/330-ath9k-restart-hardware-after-noise-floor-calibration.patch [deleted file]
package/kernel/mac80211/patches/331-ath9k_hw-do-not-run-NF-and-periodic-calibration-at-t.patch [deleted file]
package/kernel/mac80211/patches/332-ath9k_hw-start-initial-NF-calibration-after-PA-calib.patch [deleted file]
package/kernel/mac80211/patches/333-ath9k-add-support-for-endian-swap-of-eeprom-from-pla.patch [deleted file]
package/kernel/mac80211/patches/334-ath9k-allow-disabling-bands-via-platform-data.patch [deleted file]
package/kernel/mac80211/patches/335-ath9k-use-a-random-MAC-address-if-the-EEPROM-address.patch [deleted file]
package/kernel/mac80211/patches/336-ath9k-Enable-HW-queue-control-only-for-MCC.patch [deleted file]
package/kernel/mac80211/patches/337-ath-use-CTL-region-from-cfg80211-if-unset-in-EEPROM.patch [deleted file]
package/kernel/mac80211/patches/338-ath9k-Update-AR9580-initvals.patch [deleted file]
package/kernel/mac80211/patches/339-ath9k-Update-AR955x-initvals.patch [deleted file]
package/kernel/mac80211/patches/340-mac80211-add-support-for-driver-tx-power-reporting.patch [deleted file]
package/kernel/mac80211/patches/341-ath9k_common-always-update-value-in-ath9k_cmn_update.patch [deleted file]
package/kernel/mac80211/patches/342-ath9k-add-support-for-reporting-tx-power-to-mac80211.patch [deleted file]
package/kernel/mac80211/patches/343-ath10k-add-SURVEY_INFO_IN_USE-for-current-channel-on.patch [deleted file]
package/kernel/mac80211/patches/344-rtl8192cu-Fix-for-rtlwifi-s-bluetooth-coexist-functi.patch [deleted file]
package/kernel/mac80211/patches/345-rtl8192cu-Call-ieee80211_register_hw-from-rtl_usb_pr.patch [deleted file]
package/kernel/mac80211/patches/346-rtl8192cu-Prevent-Ooops-under-rtl92c_set_fw_rsvdpage.patch [deleted file]
package/kernel/mac80211/patches/347-mac80211-flush-keys-for-AP-mode-on-ieee80211_do_stop.patch [deleted file]
package/kernel/mac80211/patches/348-ath9k-Fix-RTC_DERIVED_CLK-usage.patch [deleted file]
package/kernel/mac80211/patches/349-b43-fix-NULL-pointer-dereference-in-b43_phy_copy.patch [deleted file]
package/kernel/mac80211/patches/350-ath9k-fix-misc-debugfs-when-not-using-chan-context.patch [deleted file]
package/kernel/mac80211/patches/351-ath9k-fix-regression-in-bssidmask-calculation.patch [deleted file]
package/kernel/mac80211/patches/352-mac80211-fix-use-after-free-in-defragmentation.patch [deleted file]
package/kernel/mac80211/patches/353-rt2x00-do-not-align-payload-on-modern-H-W.patch [deleted file]
package/kernel/mac80211/patches/402-ath_regd_optional.patch
package/kernel/mac80211/patches/440-ath5k_channel_bw_debugfs.patch
package/kernel/mac80211/patches/522-mac80211_configure_antenna_gain.patch
package/kernel/mac80211/patches/543-ath9k_entropy_from_adc.patch
package/kernel/mac80211/patches/603-rt2x00-introduce-rt2x00eeprom.patch
package/kernel/mac80211/patches/920-ath10k_allow_fallback_to_board_bin_on_empty_otp_stream.patch

index ab46a18627def4fab91c642dd1d6d32e3eb24500..2498b04afab13f46b9f0020c576c465c8ac13381 100644 (file)
@@ -10,11 +10,11 @@ include $(INCLUDE_DIR)/kernel.mk
 
 PKG_NAME:=mac80211
 
-PKG_VERSION:=2014-10-08
+PKG_VERSION:=2014-11-04
 PKG_RELEASE:=1
 PKG_SOURCE_URL:=http://mirror2.openwrt.org/sources
 PKG_BACKPORT_VERSION:=
-PKG_MD5SUM:=20e9de70e63fd9649d61d4670a9cc1bd
+PKG_MD5SUM:=d0b64853fb78cfd1d6cb639327811e2a
 
 PKG_SOURCE:=compat-wireless-$(PKG_VERSION)$(PKG_BACKPORT_VERSION).tar.bz2
 PKG_BUILD_DIR:=$(KERNEL_BUILD_DIR)/compat-wireless-$(PKG_VERSION)
index bd36215e01dc8889f932b5a3787ae6314a3e9287..fe90b57f153dae1b4d68d9b0eb879ece4505e9b4 100644 (file)
@@ -1,6 +1,6 @@
 --- a/net/mac80211/iface.c
 +++ b/net/mac80211/iface.c
-@@ -1825,6 +1825,11 @@ void ieee80211_remove_interfaces(struct 
+@@ -1859,6 +1859,11 @@ void ieee80211_remove_interfaces(struct 
        }
        mutex_unlock(&local->iflist_mtx);
        unregister_netdevice_many(&unreg_list);
index ddf835847c1e3f6ecdea8eb0b68ee2baa0c9ff16..cd6e31fd1b28eef68e2ff3d8e620a169cea9a19c 100644 (file)
@@ -1,6 +1,6 @@
 --- a/.local-symbols
 +++ b/.local-symbols
-@@ -416,42 +416,6 @@ USB_CDC_PHONET=
+@@ -423,42 +423,6 @@ USB_CDC_PHONET=
  USB_IPHETH=
  USB_SIERRA_NET=
  USB_VL600=
index a84ce201fb14786d7fff3ef88cbfb4a65d217c7a..cb14c0bc38fe7b6b47ebbcf56a090926d5052f2d 100644 (file)
                struct {
 --- a/net/mac80211/wpa.c
 +++ b/net/mac80211/wpa.c
-@@ -304,15 +304,22 @@ ieee80211_crypto_tkip_decrypt(struct iee
+@@ -302,15 +302,22 @@ ieee80211_crypto_tkip_decrypt(struct iee
  }
  
  
        /*
         * Mask FC: zero subtype b4 b5 b6 (if not mgmt)
         * Retry, PwrMgt, MoreData; set Protected
-@@ -334,21 +341,20 @@ static void ccmp_special_blocks(struct s
+@@ -332,21 +339,20 @@ static void ccmp_special_blocks(struct s
        else
                qos_tid = 0;
  
  
        /* AAD (extra authenticate-only data) / masked 802.11 header
         * FC | A1 | A2 | A3 | SC | [A4] | [QC] */
-@@ -404,8 +410,7 @@ static int ccmp_encrypt_skb(struct ieee8
+@@ -402,8 +408,7 @@ static int ccmp_encrypt_skb(struct ieee8
        u8 *pos;
        u8 pn[6];
        u64 pn64;
  
        if (info->control.hw_key &&
            !(info->control.hw_key->flags & IEEE80211_KEY_FLAG_GENERATE_IV) &&
-@@ -461,9 +466,9 @@ static int ccmp_encrypt_skb(struct ieee8
+@@ -457,9 +462,9 @@ static int ccmp_encrypt_skb(struct ieee8
                return 0;
  
        pos += IEEE80211_CCMP_HDR_LEN;
  
        return 0;
  }
-@@ -526,16 +531,16 @@ ieee80211_crypto_ccmp_decrypt(struct iee
+@@ -522,16 +527,16 @@ ieee80211_crypto_ccmp_decrypt(struct iee
        }
  
        if (!(status->flag & RX_FLAG_DECRYPTED)) {
index d1d9fbd9b157c5b888797ab650db04064dfa7d31..92687f080df9c3658e6fdcf5cefcc9ec4ca6985f 100644 (file)
@@ -2,7 +2,7 @@ Used for AP+STA support in OpenWrt - preserve AP mode keys across STA reconnects
 
 --- a/net/mac80211/cfg.c
 +++ b/net/mac80211/cfg.c
-@@ -846,7 +846,6 @@ static int ieee80211_stop_ap(struct wiph
+@@ -848,7 +848,6 @@ static int ieee80211_stop_ap(struct wiph
        sdata->u.ap.driver_smps_mode = IEEE80211_SMPS_OFF;
  
        __sta_info_flush(sdata, true);
index 41cde32d21cb3ea98771beaca5dccb49d5bddea3..479b409f5f6128965a78269bc2f7c0fc949635a5 100644 (file)
@@ -18,7 +18,7 @@
  static int ieee80211_ifa6_changed(struct notifier_block *nb,
                                  unsigned long data, void *arg)
  {
-@@ -1038,14 +1038,14 @@ int ieee80211_register_hw(struct ieee802
+@@ -1044,14 +1044,14 @@ int ieee80211_register_hw(struct ieee802
                goto fail_pm_qos;
        }
  
@@ -35,7 +35,7 @@
        local->ifa6_notifier.notifier_call = ieee80211_ifa6_changed;
        result = register_inet6addr_notifier(&local->ifa6_notifier);
        if (result)
-@@ -1054,13 +1054,13 @@ int ieee80211_register_hw(struct ieee802
+@@ -1060,13 +1060,13 @@ int ieee80211_register_hw(struct ieee802
  
        return 0;
  
@@ -52,7 +52,7 @@
   fail_ifa:
        pm_qos_remove_notifier(PM_QOS_NETWORK_LATENCY,
                               &local->network_latency_notifier);
-@@ -1105,10 +1105,10 @@ void ieee80211_unregister_hw(struct ieee
+@@ -1111,10 +1111,10 @@ void ieee80211_unregister_hw(struct ieee
  
        pm_qos_remove_notifier(PM_QOS_NETWORK_LATENCY,
                               &local->network_latency_notifier);
index 01d378597632215393be4eba38874445cd7404c6..9e94d00b853aa080e7185b9cdd817f5b028f560c 100644 (file)
@@ -1,6 +1,6 @@
 --- a/net/mac80211/cfg.c
 +++ b/net/mac80211/cfg.c
-@@ -1895,7 +1895,7 @@ static int ieee80211_scan(struct wiphy *
+@@ -1947,7 +1947,7 @@ static int ieee80211_scan(struct wiphy *
                 * the  frames sent while scanning on other channel will be
                 * lost)
                 */
diff --git a/package/kernel/mac80211/patches/302-ath9k-add-support-for-reporting-tx-power-to-mac80211.patch b/package/kernel/mac80211/patches/302-ath9k-add-support-for-reporting-tx-power-to-mac80211.patch
new file mode 100644 (file)
index 0000000..8bb41bd
--- /dev/null
@@ -0,0 +1,118 @@
+From: Felix Fietkau <nbd@openwrt.org>
+Date: Wed, 22 Oct 2014 18:18:04 +0200
+Subject: [PATCH] ath9k: add support for reporting tx power to mac80211
+
+Track it per channel context instead of in the softc
+
+Signed-off-by: Felix Fietkau <nbd@openwrt.org>
+---
+
+--- a/drivers/net/wireless/ath/ath9k/ath9k.h
++++ b/drivers/net/wireless/ath/ath9k/ath9k.h
+@@ -347,6 +347,7 @@ struct ath_chanctx {
+       int flush_timeout;
+       u16 txpower;
++      u16 cur_txpower;
+       bool offchannel;
+       bool stopped;
+       bool active;
+@@ -987,7 +988,6 @@ struct ath_softc {
+       u8 gtt_cnt;
+       u32 intrstatus;
+       u16 ps_flags; /* PS_* */
+-      u16 curtxpow;
+       bool ps_enabled;
+       bool ps_idle;
+       short nbcnvifs;
+--- a/drivers/net/wireless/ath/ath9k/init.c
++++ b/drivers/net/wireless/ath/ath9k/init.c
+@@ -172,17 +172,20 @@ static void ath9k_reg_notifier(struct wi
+       ath_reg_notifier_apply(wiphy, request, reg);
+       /* Set tx power */
+-      if (ah->curchan) {
+-              sc->cur_chan->txpower = 2 * ah->curchan->chan->max_power;
+-              ath9k_ps_wakeup(sc);
+-              ath9k_hw_set_txpowerlimit(ah, sc->cur_chan->txpower, false);
+-              sc->curtxpow = ath9k_hw_regulatory(ah)->power_limit;
+-              /* synchronize DFS detector if regulatory domain changed */
+-              if (sc->dfs_detector != NULL)
+-                      sc->dfs_detector->set_dfs_domain(sc->dfs_detector,
+-                                                       request->dfs_region);
+-              ath9k_ps_restore(sc);
+-      }
++      if (!ah->curchan)
++              return;
++
++      sc->cur_chan->txpower = 2 * ah->curchan->chan->max_power;
++      ath9k_ps_wakeup(sc);
++      ath9k_hw_set_txpowerlimit(ah, sc->cur_chan->txpower, false);
++      ath9k_cmn_update_txpow(ah, sc->cur_chan->cur_txpower,
++                             sc->cur_chan->txpower,
++                             &sc->cur_chan->cur_txpower);
++      /* synchronize DFS detector if regulatory domain changed */
++      if (sc->dfs_detector != NULL)
++              sc->dfs_detector->set_dfs_domain(sc->dfs_detector,
++                                               request->dfs_region);
++      ath9k_ps_restore(sc);
+ }
+ /*
+--- a/drivers/net/wireless/ath/ath9k/main.c
++++ b/drivers/net/wireless/ath/ath9k/main.c
+@@ -233,8 +233,9 @@ static bool ath_complete_reset(struct at
+       ath9k_calculate_summary_state(sc, sc->cur_chan);
+       ath_startrecv(sc);
+-      ath9k_cmn_update_txpow(ah, sc->curtxpow,
+-                             sc->cur_chan->txpower, &sc->curtxpow);
++      ath9k_cmn_update_txpow(ah, sc->cur_chan->cur_txpower,
++                             sc->cur_chan->txpower,
++                             &sc->cur_chan->cur_txpower);
+       clear_bit(ATH_OP_HW_RESET, &common->op_flags);
+       if (!sc->cur_chan->offchannel && start) {
+@@ -1471,8 +1472,9 @@ static int ath9k_config(struct ieee80211
+       if (changed & IEEE80211_CONF_CHANGE_POWER) {
+               ath_dbg(common, CONFIG, "Set power: %d\n", conf->power_level);
+               sc->cur_chan->txpower = 2 * conf->power_level;
+-              ath9k_cmn_update_txpow(ah, sc->curtxpow,
+-                                     sc->cur_chan->txpower, &sc->curtxpow);
++              ath9k_cmn_update_txpow(ah, sc->cur_chan->cur_txpower,
++                                     sc->cur_chan->txpower,
++                                     &sc->cur_chan->cur_txpower);
+       }
+       mutex_unlock(&sc->mutex);
+@@ -2594,6 +2596,24 @@ void ath9k_fill_chanctx_ops(void)
+ #endif
++static int ath9k_get_txpower(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
++                           int *dbm)
++{
++      struct ath_softc *sc = hw->priv;
++      struct ath_vif *avp = (void *)vif->drv_priv;
++
++      mutex_lock(&sc->mutex);
++      if (avp->chanctx)
++              *dbm = avp->chanctx->cur_txpower;
++      else
++              *dbm = sc->cur_chan->cur_txpower;
++      mutex_unlock(&sc->mutex);
++
++      *dbm /= 2;
++
++      return 0;
++}
++
+ struct ieee80211_ops ath9k_ops = {
+       .tx                 = ath9k_tx,
+       .start              = ath9k_start,
+@@ -2640,4 +2660,5 @@ struct ieee80211_ops ath9k_ops = {
+ #endif
+       .sw_scan_start      = ath9k_sw_scan_start,
+       .sw_scan_complete   = ath9k_sw_scan_complete,
++      .get_txpower        = ath9k_get_txpower,
+ };
diff --git a/package/kernel/mac80211/patches/302-mac80211-trivial-fix-typo-in-starting-baserate-for-r.patch b/package/kernel/mac80211/patches/302-mac80211-trivial-fix-typo-in-starting-baserate-for-r.patch
deleted file mode 100644 (file)
index c4c416d..0000000
+++ /dev/null
@@ -1,20 +0,0 @@
-From: Karl Beldan <karl.beldan@rivierawaves.com>
-Date: Tue, 7 Oct 2014 15:53:38 +0200
-Subject: [PATCH] mac80211/trivial: fix typo in starting baserate for
- rts_cts_rate_idx
-
-Fixes: 5253ffb8 ("mac80211: always pick a basic rate to tx RTS/CTS for pre-HT rates")
-Signed-off-by: Karl Beldan <karl.beldan@rivierawaves.com>
----
-
---- a/net/mac80211/rate.c
-+++ b/net/mac80211/rate.c
-@@ -448,7 +448,7 @@ static void rate_fixup_ratelist(struct i
-        */
-       if (!(rates[0].flags & IEEE80211_TX_RC_MCS)) {
-               u32 basic_rates = vif->bss_conf.basic_rates;
--              s8 baserate = basic_rates ? ffs(basic_rates - 1) : 0;
-+              s8 baserate = basic_rates ? ffs(basic_rates) - 1 : 0;
-               rate = &sband->bitrates[rates[0].idx];
diff --git a/package/kernel/mac80211/patches/303-ath10k-add-SURVEY_INFO_IN_USE-for-current-channel-on.patch b/package/kernel/mac80211/patches/303-ath10k-add-SURVEY_INFO_IN_USE-for-current-channel-on.patch
new file mode 100644 (file)
index 0000000..96cd78b
--- /dev/null
@@ -0,0 +1,20 @@
+From: Felix Fietkau <nbd@openwrt.org>
+Date: Wed, 22 Oct 2014 18:44:03 +0200
+Subject: [PATCH] ath10k: add SURVEY_INFO_IN_USE for current channel on
+ survey
+
+Signed-off-by: Felix Fietkau <nbd@openwrt.org>
+---
+
+--- a/drivers/net/wireless/ath/ath10k/mac.c
++++ b/drivers/net/wireless/ath/ath10k/mac.c
+@@ -4044,6 +4044,9 @@ static int ath10k_get_survey(struct ieee
+       survey->channel = &sband->channels[idx];
++      if (ar->rx_channel == survey->channel)
++              survey->filled |= SURVEY_INFO_IN_USE;
++
+ exit:
+       mutex_unlock(&ar->conf_mutex);
+       return ret;
diff --git a/package/kernel/mac80211/patches/303-ath9k-Use-sta_state-callback.patch b/package/kernel/mac80211/patches/303-ath9k-Use-sta_state-callback.patch
deleted file mode 100644 (file)
index 03f1304..0000000
+++ /dev/null
@@ -1,55 +0,0 @@
-From: Sujith Manoharan <c_manoha@qca.qualcomm.com>
-Date: Fri, 17 Oct 2014 07:40:08 +0530
-Subject: [PATCH] ath9k: Use sta_state() callback
-
-Instead of using the sta_add()/sta_remove() callbacks,
-use the sta_state() callback since this gives
-more fine-grained control.
-
-Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
----
-
---- a/drivers/net/wireless/ath/ath9k/main.c
-+++ b/drivers/net/wireless/ath/ath9k/main.c
-@@ -1547,6 +1547,31 @@ static int ath9k_sta_remove(struct ieee8
-       return 0;
- }
-+static int ath9k_sta_state(struct ieee80211_hw *hw,
-+                         struct ieee80211_vif *vif,
-+                         struct ieee80211_sta *sta,
-+                         enum ieee80211_sta_state old_state,
-+                         enum ieee80211_sta_state new_state)
-+{
-+      struct ath_softc *sc = hw->priv;
-+      struct ath_common *common = ath9k_hw_common(sc->sc_ah);
-+      int ret = 0;
-+
-+      if (old_state == IEEE80211_STA_AUTH &&
-+          new_state == IEEE80211_STA_ASSOC) {
-+              ret = ath9k_sta_add(hw, vif, sta);
-+              ath_dbg(common, CONFIG,
-+                      "Add station: %pM\n", sta->addr);
-+      } else if (old_state == IEEE80211_STA_ASSOC &&
-+                 new_state == IEEE80211_STA_AUTH) {
-+              ret = ath9k_sta_remove(hw, vif, sta);
-+              ath_dbg(common, CONFIG,
-+                      "Remove station: %pM\n", sta->addr);
-+      }
-+
-+      return ret;
-+}
-+
- static void ath9k_sta_set_tx_filter(struct ath_hw *ah,
-                                   struct ath_node *an,
-                                   bool set)
-@@ -2471,8 +2496,7 @@ struct ieee80211_ops ath9k_ops = {
-       .remove_interface   = ath9k_remove_interface,
-       .config             = ath9k_config,
-       .configure_filter   = ath9k_configure_filter,
--      .sta_add            = ath9k_sta_add,
--      .sta_remove         = ath9k_sta_remove,
-+      .sta_state          = ath9k_sta_state,
-       .sta_notify         = ath9k_sta_notify,
-       .conf_tx            = ath9k_conf_tx,
-       .bss_info_changed   = ath9k_bss_info_changed,
diff --git a/package/kernel/mac80211/patches/304-ath9k-Enable-multi-channel-properly.patch b/package/kernel/mac80211/patches/304-ath9k-Enable-multi-channel-properly.patch
deleted file mode 100644 (file)
index e743eb8..0000000
+++ /dev/null
@@ -1,82 +0,0 @@
-From: Sujith Manoharan <c_manoha@qca.qualcomm.com>
-Date: Fri, 17 Oct 2014 07:40:09 +0530
-Subject: [PATCH] ath9k: Enable multi-channel properly
-
-In MCC mode, currently the decision to enable
-the multi-channel state machine is done
-based on the association status if one of
-the interfaces assigned to a context is in
-station mode.
-
-This allows the driver to switch to the other
-context before the current station is able to
-complete the 4-way handshake in case it is
-required and this causes problems.
-
-Instead, enable multi-channel mode when the
-station moves to the authorized state. This
-disallows an early switch to the other channel.
-
-Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
----
-
---- a/drivers/net/wireless/ath/ath9k/ath9k.h
-+++ b/drivers/net/wireless/ath/ath9k/ath9k.h
-@@ -362,7 +362,7 @@ enum ath_chanctx_event {
-       ATH_CHANCTX_EVENT_BEACON_SENT,
-       ATH_CHANCTX_EVENT_TSF_TIMER,
-       ATH_CHANCTX_EVENT_BEACON_RECEIVED,
--      ATH_CHANCTX_EVENT_ASSOC,
-+      ATH_CHANCTX_EVENT_AUTHORIZED,
-       ATH_CHANCTX_EVENT_SWITCH,
-       ATH_CHANCTX_EVENT_ASSIGN,
-       ATH_CHANCTX_EVENT_UNASSIGN,
---- a/drivers/net/wireless/ath/ath9k/channel.c
-+++ b/drivers/net/wireless/ath/ath9k/channel.c
-@@ -171,7 +171,7 @@ static const char *chanctx_event_string(
-               case_rtn_string(ATH_CHANCTX_EVENT_BEACON_SENT);
-               case_rtn_string(ATH_CHANCTX_EVENT_TSF_TIMER);
-               case_rtn_string(ATH_CHANCTX_EVENT_BEACON_RECEIVED);
--              case_rtn_string(ATH_CHANCTX_EVENT_ASSOC);
-+              case_rtn_string(ATH_CHANCTX_EVENT_AUTHORIZED);
-               case_rtn_string(ATH_CHANCTX_EVENT_SWITCH);
-               case_rtn_string(ATH_CHANCTX_EVENT_ASSIGN);
-               case_rtn_string(ATH_CHANCTX_EVENT_UNASSIGN);
-@@ -510,7 +510,7 @@ void ath_chanctx_event(struct ath_softc 
-               ath_chanctx_setup_timer(sc, tsf_time);
-               break;
--      case ATH_CHANCTX_EVENT_ASSOC:
-+      case ATH_CHANCTX_EVENT_AUTHORIZED:
-               if (sc->sched.state != ATH_CHANCTX_STATE_FORCE_ACTIVE ||
-                   avp->chanctx != sc->cur_chan)
-                       break;
---- a/drivers/net/wireless/ath/ath9k/main.c
-+++ b/drivers/net/wireless/ath/ath9k/main.c
-@@ -1569,6 +1569,13 @@ static int ath9k_sta_state(struct ieee80
-                       "Remove station: %pM\n", sta->addr);
-       }
-+      if (ath9k_is_chanctx_enabled()) {
-+              if (old_state == IEEE80211_STA_ASSOC &&
-+                  new_state == IEEE80211_STA_AUTHORIZED)
-+                      ath_chanctx_event(sc, vif,
-+                                        ATH_CHANCTX_EVENT_AUTHORIZED);
-+      }
-+
-       return ret;
- }
-@@ -1761,12 +1768,6 @@ static void ath9k_bss_info_changed(struc
-               avp->assoc = bss_conf->assoc;
-               ath9k_calculate_summary_state(sc, avp->chanctx);
--
--              if (ath9k_is_chanctx_enabled()) {
--                      if (bss_conf->assoc)
--                              ath_chanctx_event(sc, vif,
--                                                ATH_CHANCTX_EVENT_ASSOC);
--              }
-       }
-       if (changed & BSS_CHANGED_IBSS) {
diff --git a/package/kernel/mac80211/patches/304-ath9k-Fix-RTC_DERIVED_CLK-usage.patch b/package/kernel/mac80211/patches/304-ath9k-Fix-RTC_DERIVED_CLK-usage.patch
new file mode 100644 (file)
index 0000000..a9205c0
--- /dev/null
@@ -0,0 +1,61 @@
+From: Miaoqing Pan <miaoqing@qca.qualcomm.com>
+Date: Thu, 6 Nov 2014 10:52:23 +0530
+Subject: [PATCH] ath9k: Fix RTC_DERIVED_CLK usage
+
+Based on the reference clock, which could be 25MHz or 40MHz,
+AR_RTC_DERIVED_CLK is programmed differently for AR9340 and AR9550.
+But, when a chip reset is done, processing the initvals
+sets the register back to the default value.
+
+Fix this by moving the code in ath9k_hw_init_pll() to
+ar9003_hw_override_ini(). Also, do this override for AR9531.
+
+Cc: stable@vger.kernel.org
+Signed-off-by: Miaoqing Pan <miaoqing@qca.qualcomm.com>
+Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
+---
+
+--- a/drivers/net/wireless/ath/ath9k/ar9003_phy.c
++++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.c
+@@ -664,6 +664,19 @@ static void ar9003_hw_override_ini(struc
+               ah->enabled_cals |= TX_CL_CAL;
+       else
+               ah->enabled_cals &= ~TX_CL_CAL;
++
++      if (AR_SREV_9340(ah) || AR_SREV_9531(ah) || AR_SREV_9550(ah)) {
++              if (ah->is_clk_25mhz) {
++                      REG_WRITE(ah, AR_RTC_DERIVED_CLK, 0x17c << 1);
++                      REG_WRITE(ah, AR_SLP32_MODE, 0x0010f3d7);
++                      REG_WRITE(ah, AR_SLP32_INC, 0x0001e7ae);
++              } else {
++                      REG_WRITE(ah, AR_RTC_DERIVED_CLK, 0x261 << 1);
++                      REG_WRITE(ah, AR_SLP32_MODE, 0x0010f400);
++                      REG_WRITE(ah, AR_SLP32_INC, 0x0001e800);
++              }
++              udelay(100);
++      }
+ }
+ static void ar9003_hw_prog_ini(struct ath_hw *ah,
+--- a/drivers/net/wireless/ath/ath9k/hw.c
++++ b/drivers/net/wireless/ath/ath9k/hw.c
+@@ -870,19 +870,6 @@ static void ath9k_hw_init_pll(struct ath
+       udelay(RTC_PLL_SETTLE_DELAY);
+       REG_WRITE(ah, AR_RTC_SLEEP_CLK, AR_RTC_FORCE_DERIVED_CLK);
+-
+-      if (AR_SREV_9340(ah) || AR_SREV_9550(ah)) {
+-              if (ah->is_clk_25mhz) {
+-                      REG_WRITE(ah, AR_RTC_DERIVED_CLK, 0x17c << 1);
+-                      REG_WRITE(ah, AR_SLP32_MODE, 0x0010f3d7);
+-                      REG_WRITE(ah,  AR_SLP32_INC, 0x0001e7ae);
+-              } else {
+-                      REG_WRITE(ah, AR_RTC_DERIVED_CLK, 0x261 << 1);
+-                      REG_WRITE(ah, AR_SLP32_MODE, 0x0010f400);
+-                      REG_WRITE(ah,  AR_SLP32_INC, 0x0001e800);
+-              }
+-              udelay(100);
+-      }
+ }
+ static void ath9k_hw_init_interrupt_masks(struct ath_hw *ah,
diff --git a/package/kernel/mac80211/patches/305-ath9k-Process-beacons-properly.patch b/package/kernel/mac80211/patches/305-ath9k-Process-beacons-properly.patch
deleted file mode 100644 (file)
index 36da404..0000000
+++ /dev/null
@@ -1,37 +0,0 @@
-From: Sujith Manoharan <c_manoha@qca.qualcomm.com>
-Date: Fri, 17 Oct 2014 07:40:10 +0530
-Subject: [PATCH] ath9k: Process beacons properly
-
-When the current operating channel context has
-been marked as ATH_CHANCTX_STATE_FORCE_ACTIVE,
-do not process beacons that might be received,
-since we have to wait for the station to become
-authorized.
-
-Also, since the cached TSF value will be zero
-initially do not rearm the timer in this
-case when a beacon is received, since it results
-in spurious values.
-
-Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
----
-
---- a/drivers/net/wireless/ath/ath9k/channel.c
-+++ b/drivers/net/wireless/ath/ath9k/channel.c
-@@ -495,10 +495,15 @@ void ath_chanctx_event(struct ath_softc 
-                   sc->cur_chan == &sc->offchannel.chan)
-                       break;
--              ath_chanctx_adjust_tbtt_delta(sc);
-               sc->sched.beacon_pending = false;
-               sc->sched.beacon_miss = 0;
-+              if (sc->sched.state == ATH_CHANCTX_STATE_FORCE_ACTIVE ||
-+                  !sc->cur_chan->tsf_val)
-+                      break;
-+
-+              ath_chanctx_adjust_tbtt_delta(sc);
-+
-               /* TSF time might have been updated by the incoming beacon,
-                * need update the channel switch timer to reflect the change.
-                */
diff --git a/package/kernel/mac80211/patches/305-b43-fix-NULL-pointer-dereference-in-b43_phy_copy.patch b/package/kernel/mac80211/patches/305-b43-fix-NULL-pointer-dereference-in-b43_phy_copy.patch
new file mode 100644 (file)
index 0000000..649ed6b
--- /dev/null
@@ -0,0 +1,38 @@
+From: Hauke Mehrtens <hauke@hauke-m.de>
+Date: Wed, 5 Nov 2014 23:31:07 +0100
+Subject: [PATCH] b43: fix NULL pointer dereference in b43_phy_copy()
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+phy_read and phy_write are not set for every phy any more sine this:
+commit d342b95dd735014a590f9051b1ba227eb54ca8f6
+Author: RafaÅ‚ MiÅ‚ecki <zajec5@gmail.com>
+Date:   Thu Jul 31 21:59:43 2014 +0200
+
+    b43: don't duplicate common PHY read/write ops
+
+b43_phy_copy() accesses phy_read and phy_write directly and will fail
+with some phys. This patch fixes the regression by using the
+b43_phy_read() and b43_phy_write() functions which should be used for
+read and write access.
+
+This should fix this bug report:
+https://bugzilla.kernel.org/show_bug.cgi?id=87731
+
+Reported-by: Volker Kempter <v.kempter@pe.tu-clausthal.de>
+Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+---
+
+--- a/drivers/net/wireless/b43/phy_common.c
++++ b/drivers/net/wireless/b43/phy_common.c
+@@ -301,8 +301,7 @@ void b43_phy_write(struct b43_wldev *dev
+ void b43_phy_copy(struct b43_wldev *dev, u16 destreg, u16 srcreg)
+ {
+       assert_mac_suspended(dev);
+-      dev->phy.ops->phy_write(dev, destreg,
+-              dev->phy.ops->phy_read(dev, srcreg));
++      b43_phy_write(dev, destreg, b43_phy_read(dev, srcreg));
+ }
+ void b43_phy_mask(struct b43_wldev *dev, u16 offset, u16 mask)
diff --git a/package/kernel/mac80211/patches/306-ath9k-Unify-reset-API.patch b/package/kernel/mac80211/patches/306-ath9k-Unify-reset-API.patch
deleted file mode 100644 (file)
index 6460a32..0000000
+++ /dev/null
@@ -1,108 +0,0 @@
-From: Sujith Manoharan <c_manoha@qca.qualcomm.com>
-Date: Fri, 17 Oct 2014 07:40:11 +0530
-Subject: [PATCH] ath9k: Unify reset API
-
-Instead of having ath_reset_internal() and ath_reset()
-as two separate calls to perform a HW reset, have
-one function. This makes sure that the behavior will
-be the same at all callsites.
-
-Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
----
-
---- a/drivers/net/wireless/ath/ath9k/ath9k.h
-+++ b/drivers/net/wireless/ath/ath9k/ath9k.h
-@@ -540,7 +540,6 @@ static inline void ath_chanctx_check_act
- #endif /* CPTCFG_ATH9K_CHANNEL_CONTEXT */
--int ath_reset_internal(struct ath_softc *sc, struct ath9k_channel *hchan);
- void ath_startrecv(struct ath_softc *sc);
- bool ath_stoprecv(struct ath_softc *sc);
- u32 ath_calcrxfilter(struct ath_softc *sc);
-@@ -1069,7 +1068,7 @@ void ath9k_tasklet(unsigned long data);
- int ath_cabq_update(struct ath_softc *);
- u8 ath9k_parse_mpdudensity(u8 mpdudensity);
- irqreturn_t ath_isr(int irq, void *dev);
--int ath_reset(struct ath_softc *sc);
-+int ath_reset(struct ath_softc *sc, struct ath9k_channel *hchan);
- void ath_cancel_work(struct ath_softc *sc);
- void ath_restart_work(struct ath_softc *sc);
- int ath9k_init_device(u16 devid, struct ath_softc *sc,
---- a/drivers/net/wireless/ath/ath9k/channel.c
-+++ b/drivers/net/wireless/ath/ath9k/channel.c
-@@ -66,7 +66,7 @@ static int ath_set_channel(struct ath_so
-       }
-       hchan = &sc->sc_ah->channels[pos];
--      r = ath_reset_internal(sc, hchan);
-+      r = ath_reset(sc, hchan);
-       if (r)
-               return r;
---- a/drivers/net/wireless/ath/ath9k/main.c
-+++ b/drivers/net/wireless/ath/ath9k/main.c
-@@ -270,7 +270,7 @@ static bool ath_complete_reset(struct at
-       return true;
- }
--int ath_reset_internal(struct ath_softc *sc, struct ath9k_channel *hchan)
-+static int ath_reset_internal(struct ath_softc *sc, struct ath9k_channel *hchan)
- {
-       struct ath_hw *ah = sc->sc_ah;
-       struct ath_common *common = ath9k_hw_common(ah);
-@@ -598,12 +598,12 @@ chip_reset:
- #undef SCHED_INTR
- }
--int ath_reset(struct ath_softc *sc)
-+int ath_reset(struct ath_softc *sc, struct ath9k_channel *hchan)
- {
-       int r;
-       ath9k_ps_wakeup(sc);
--      r = ath_reset_internal(sc, NULL);
-+      r = ath_reset_internal(sc, hchan);
-       ath9k_ps_restore(sc);
-       return r;
-@@ -623,7 +623,9 @@ void ath_reset_work(struct work_struct *
- {
-       struct ath_softc *sc = container_of(work, struct ath_softc, hw_reset_work);
--      ath_reset(sc);
-+      ath9k_ps_wakeup(sc);
-+      ath_reset_internal(sc, NULL);
-+      ath9k_ps_restore(sc);
- }
- /**********************/
-@@ -2044,7 +2046,7 @@ void __ath9k_flush(struct ieee80211_hw *
-               spin_unlock_bh(&sc->sc_pcu_lock);
-               if (!drain_txq)
--                      ath_reset(sc);
-+                      ath_reset(sc, NULL);
-               ath9k_ps_restore(sc);
-       }
---- a/drivers/net/wireless/ath/ath9k/tx99.c
-+++ b/drivers/net/wireless/ath/ath9k/tx99.c
-@@ -99,7 +99,7 @@ static struct sk_buff *ath9k_build_tx99_
- static void ath9k_tx99_deinit(struct ath_softc *sc)
- {
--      ath_reset(sc);
-+      ath_reset(sc, NULL);
-       ath9k_ps_wakeup(sc);
-       ath9k_tx99_stop(sc);
-@@ -127,7 +127,7 @@ static int ath9k_tx99_init(struct ath_so
-       memset(&txctl, 0, sizeof(txctl));
-       txctl.txq = sc->tx.txq_map[IEEE80211_AC_VO];
--      ath_reset(sc);
-+      ath_reset(sc, NULL);
-       ath9k_ps_wakeup(sc);
diff --git a/package/kernel/mac80211/patches/306-ath9k-fix-misc-debugfs-when-not-using-chan-context.patch b/package/kernel/mac80211/patches/306-ath9k-fix-misc-debugfs-when-not-using-chan-context.patch
new file mode 100644 (file)
index 0000000..30b3dcf
--- /dev/null
@@ -0,0 +1,33 @@
+From: Ben Greear <greearb@candelatech.com>
+Date: Tue, 4 Nov 2014 15:22:49 -0800
+Subject: [PATCH] ath9k: fix misc debugfs when not using chan context
+
+When channel-context is not enabled, all vifs belong to
+the first context, but it is not configured as 'assigned'.
+
+Fix misc debugfs file to print out info for non-assigned
+contexts, and also print whether ctx is assigned or not.
+
+Signed-off-by: Ben Greear <greearb@candelatech.com>
+---
+
+--- a/drivers/net/wireless/ath/ath9k/debug.c
++++ b/drivers/net/wireless/ath/ath9k/debug.c
+@@ -828,13 +828,14 @@ static ssize_t read_file_misc(struct fil
+       i = 0;
+       ath_for_each_chanctx(sc, ctx) {
+-              if (!ctx->assigned || list_empty(&ctx->vifs))
++              if (list_empty(&ctx->vifs))
+                       continue;
+               ath9k_calculate_iter_data(sc, ctx, &iter_data);
+               len += scnprintf(buf + len, sizeof(buf) - len,
+-                      "VIF-COUNTS: CTX %i AP: %i STA: %i MESH: %i WDS: %i",
+-                      i++, iter_data.naps, iter_data.nstations,
++                      "VIFS: CTX %i(%i) AP: %i STA: %i MESH: %i WDS: %i",
++                      i++, (int)(ctx->assigned), iter_data.naps,
++                      iter_data.nstations,
+                       iter_data.nmeshes, iter_data.nwds);
+               len += scnprintf(buf + len, sizeof(buf) - len,
+                       " ADHOC: %i TOTAL: %hi BEACON-VIF: %hi\n",
diff --git a/package/kernel/mac80211/patches/307-ath9k-Set-ATH_OP_HW_RESET-before-HW-reset.patch b/package/kernel/mac80211/patches/307-ath9k-Set-ATH_OP_HW_RESET-before-HW-reset.patch
deleted file mode 100644 (file)
index 75a2ab5..0000000
+++ /dev/null
@@ -1,55 +0,0 @@
-From: Sujith Manoharan <c_manoha@qca.qualcomm.com>
-Date: Fri, 17 Oct 2014 07:40:12 +0530
-Subject: [PATCH] ath9k: Set ATH_OP_HW_RESET before HW reset
-
-When a HW reset is done, the interrupt tasklet is
-disabled before ISRs are disabled in the HW. This
-allows a small window where the HW can still generate
-interrupts. Since the tasklet is disabled and not killed,
-it is not scheduled but deferred for execution at a later
-time.
-
-This happens because ATH_OP_HW_RESET is not set when ath_reset()
-is called. When the hw_reset_work workqueue is used, this
-problem doesn't arise because ATH_OP_HW_RESET is set
-and the ISR bails out.
-
-Set ATH_OP_HW_RESET properly in ath_reset() to avoid
-this race - all the ath_reset_internal() callers have
-been converted to use ath_reset() in the previous patch.
-
-Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
----
-
---- a/drivers/net/wireless/ath/ath9k/main.c
-+++ b/drivers/net/wireless/ath/ath9k/main.c
-@@ -598,10 +598,17 @@ chip_reset:
- #undef SCHED_INTR
- }
-+/*
-+ * This function is called when a HW reset cannot be deferred
-+ * and has to be immediate.
-+ */
- int ath_reset(struct ath_softc *sc, struct ath9k_channel *hchan)
- {
-+      struct ath_common *common = ath9k_hw_common(sc->sc_ah);
-       int r;
-+      set_bit(ATH_OP_HW_RESET, &common->op_flags);
-+
-       ath9k_ps_wakeup(sc);
-       r = ath_reset_internal(sc, hchan);
-       ath9k_ps_restore(sc);
-@@ -609,6 +616,11 @@ int ath_reset(struct ath_softc *sc, stru
-       return r;
- }
-+/*
-+ * When a HW reset can be deferred, it is added to the
-+ * hw_reset_work workqueue, but we set ATH_OP_HW_RESET before
-+ * queueing.
-+ */
- void ath9k_queue_reset(struct ath_softc *sc, enum ath_reset_type type)
- {
-       struct ath_common *common = ath9k_hw_common(sc->sc_ah);
diff --git a/package/kernel/mac80211/patches/307-ath9k-fix-regression-in-bssidmask-calculation.patch b/package/kernel/mac80211/patches/307-ath9k-fix-regression-in-bssidmask-calculation.patch
new file mode 100644 (file)
index 0000000..d596392
--- /dev/null
@@ -0,0 +1,70 @@
+From: Ben Greear <greearb@candelatech.com>
+Date: Tue, 4 Nov 2014 15:22:50 -0800
+Subject: [PATCH] ath9k: fix regression in bssidmask calculation
+
+The commit that went into 3.17:
+
+    ath9k: Summarize hw state per channel context
+
+    Group and set hw state (opmode, primary_sta, beacon conf) per
+    channel context instead of whole list of vifs. This would allow
+    each channel context to run in different mode (STA/AP).
+
+    Signed-off-by: Felix Fietkau <nbd@openwrt.org>
+    Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com>
+    Signed-off-by: John W. Linville <linville@tuxdriver.com>
+
+broke multi-vif configuration due to not properly calculating
+the bssid mask.
+
+The test case that caught this was:
+
+ create wlan0 and sta0-4 (6 total), not sure how much that matters.
+ associate all 6 (works fine)
+ disconnect 5 of them, leaving sta0 up
+ Start trying to bring up the other 5 one at a time.  It will
+ fail, with iw events looking like this (in these logs, several
+ sta are trying to come up, but symptom is the same with just one)
+
+The patch causing the regression made quite a few changes, but
+the part I think caused this particular problem was not
+recalculating the bssid mask when adding and removing interfaces.
+
+Re-adding those calls fixes my test case.  Fix bad comment
+as well.
+
+Signed-off-by: Ben Greear <greearb@candelatech.com>
+---
+
+--- a/drivers/net/wireless/ath/ath9k/main.c
++++ b/drivers/net/wireless/ath/ath9k/main.c
+@@ -994,9 +994,8 @@ void ath9k_calculate_iter_data(struct at
+       struct ath_vif *avp;
+       /*
+-       * Pick the MAC address of the first interface as the new hardware
+-       * MAC address. The hardware will use it together with the BSSID mask
+-       * when matching addresses.
++       * The hardware will use primary station addr together with the
++       * BSSID mask when matching addresses.
+        */
+       memset(iter_data, 0, sizeof(*iter_data));
+       memset(&iter_data->mask, 0xff, ETH_ALEN);
+@@ -1225,6 +1224,8 @@ static int ath9k_add_interface(struct ie
+               list_add_tail(&avp->list, &avp->chanctx->vifs);
+       }
++      ath9k_calculate_summary_state(sc, avp->chanctx);
++
+       ath9k_assign_hw_queues(hw, vif);
+       an->sc = sc;
+@@ -1294,6 +1295,8 @@ static void ath9k_remove_interface(struc
+       ath_tx_node_cleanup(sc, &avp->mcast_node);
++      ath9k_calculate_summary_state(sc, avp->chanctx);
++
+       mutex_unlock(&sc->mutex);
+ }
diff --git a/package/kernel/mac80211/patches/308-ath9k-Disable-beacon-tasklet-during-reset.patch b/package/kernel/mac80211/patches/308-ath9k-Disable-beacon-tasklet-during-reset.patch
deleted file mode 100644 (file)
index faf282d..0000000
+++ /dev/null
@@ -1,29 +0,0 @@
-From: Sujith Manoharan <c_manoha@qca.qualcomm.com>
-Date: Fri, 17 Oct 2014 07:40:13 +0530
-Subject: [PATCH] ath9k: Disable beacon tasklet during reset
-
-When a chip reset is done, all running timers,
-tasklets etc. are stopped but the beacon tasklet
-is left running. Fix this.
-
-Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
----
-
---- a/drivers/net/wireless/ath/ath9k/main.c
-+++ b/drivers/net/wireless/ath/ath9k/main.c
-@@ -281,6 +281,7 @@ static int ath_reset_internal(struct ath
-       __ath_cancel_work(sc);
-       tasklet_disable(&sc->intr_tq);
-+      tasklet_disable(&sc->bcon_tasklet);
-       spin_lock_bh(&sc->sc_pcu_lock);
-       if (!sc->cur_chan->offchannel) {
-@@ -326,6 +327,7 @@ static int ath_reset_internal(struct ath
- out:
-       spin_unlock_bh(&sc->sc_pcu_lock);
-+      tasklet_enable(&sc->bcon_tasklet);
-       tasklet_enable(&sc->intr_tq);
-       return r;
diff --git a/package/kernel/mac80211/patches/308-rt2x00-do-not-align-payload-on-modern-H-W.patch b/package/kernel/mac80211/patches/308-rt2x00-do-not-align-payload-on-modern-H-W.patch
new file mode 100644 (file)
index 0000000..384a0be
--- /dev/null
@@ -0,0 +1,95 @@
+From: Stanislaw Gruszka <sgruszka@redhat.com>
+Date: Sun, 2 Nov 2014 13:38:47 +0100
+Subject: [PATCH] rt2x00: do not align payload on modern H/W
+
+RT2800 and newer hardware require padding between header and payload if
+header length is not multiple of 4.
+
+For historical reasons we also align payload to to 4 bytes boundary, but
+such alignment is not needed on modern H/W.
+
+Patch improve performance on embedded CPUs and _possibly_ fixes
+skb_under_panic problems reported from time to time:
+
+https://bugzilla.kernel.org/show_bug.cgi?id=84911
+https://bugzilla.kernel.org/show_bug.cgi?id=72471
+http://marc.info/?l=linux-wireless&m=139108549530402&w=2
+https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1087591
+
+But we can not explain or otherwise confirm the patch fixes this panic
+issue for sure.
+
+Originally-From: Helmut Schaa <helmut.schaa@googlemail.com>
+Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
+---
+
+--- a/drivers/net/wireless/rt2x00/rt2x00queue.c
++++ b/drivers/net/wireless/rt2x00/rt2x00queue.c
+@@ -158,55 +158,29 @@ void rt2x00queue_align_frame(struct sk_b
+       skb_trim(skb, frame_length);
+ }
+-void rt2x00queue_insert_l2pad(struct sk_buff *skb, unsigned int header_length)
++/*
++ * H/W needs L2 padding between the header and the paylod if header size
++ * is not 4 bytes aligned.
++ */
++void rt2x00queue_insert_l2pad(struct sk_buff *skb, unsigned int hdr_len)
+ {
+-      unsigned int payload_length = skb->len - header_length;
+-      unsigned int header_align = ALIGN_SIZE(skb, 0);
+-      unsigned int payload_align = ALIGN_SIZE(skb, header_length);
+-      unsigned int l2pad = payload_length ? L2PAD_SIZE(header_length) : 0;
++      unsigned int l2pad = (skb->len > hdr_len) ? L2PAD_SIZE(hdr_len) : 0;
+-      /*
+-       * Adjust the header alignment if the payload needs to be moved more
+-       * than the header.
+-       */
+-      if (payload_align > header_align)
+-              header_align += 4;
+-
+-      /* There is nothing to do if no alignment is needed */
+-      if (!header_align)
++      if (!l2pad)
+               return;
+-      /* Reserve the amount of space needed in front of the frame */
+-      skb_push(skb, header_align);
+-
+-      /*
+-       * Move the header.
+-       */
+-      memmove(skb->data, skb->data + header_align, header_length);
+-
+-      /* Move the payload, if present and if required */
+-      if (payload_length && payload_align)
+-              memmove(skb->data + header_length + l2pad,
+-                      skb->data + header_length + l2pad + payload_align,
+-                      payload_length);
+-
+-      /* Trim the skb to the correct size */
+-      skb_trim(skb, header_length + l2pad + payload_length);
++      skb_push(skb, l2pad);
++      memmove(skb->data, skb->data + l2pad, hdr_len);
+ }
+-void rt2x00queue_remove_l2pad(struct sk_buff *skb, unsigned int header_length)
++void rt2x00queue_remove_l2pad(struct sk_buff *skb, unsigned int hdr_len)
+ {
+-      /*
+-       * L2 padding is only present if the skb contains more than just the
+-       * IEEE 802.11 header.
+-       */
+-      unsigned int l2pad = (skb->len > header_length) ?
+-                              L2PAD_SIZE(header_length) : 0;
++      unsigned int l2pad = (skb->len > hdr_len) ? L2PAD_SIZE(hdr_len) : 0;
+       if (!l2pad)
+               return;
+-      memmove(skb->data + l2pad, skb->data, header_length);
++      memmove(skb->data + l2pad, skb->data, hdr_len);
+       skb_pull(skb, l2pad);
+ }
diff --git a/package/kernel/mac80211/patches/309-ath9k-Clear-NoA-schedule-properly.patch b/package/kernel/mac80211/patches/309-ath9k-Clear-NoA-schedule-properly.patch
deleted file mode 100644 (file)
index 6089d60..0000000
+++ /dev/null
@@ -1,36 +0,0 @@
-From: Sujith Manoharan <c_manoha@qca.qualcomm.com>
-Date: Fri, 17 Oct 2014 07:40:14 +0530
-Subject: [PATCH] ath9k: Clear NoA schedule properly
-
-When an active context transitions to inactive
-state, the NoA schedule needs to be removed
-for the context that has beaconing enabled.
-Not doing this will affect p2p clients.
-
-Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
----
-
---- a/drivers/net/wireless/ath/ath9k/channel.c
-+++ b/drivers/net/wireless/ath/ath9k/channel.c
-@@ -356,6 +356,21 @@ void ath_chanctx_event(struct ath_softc 
-                               "Move chanctx state from WAIT_FOR_TIMER to WAIT_FOR_BEACON\n");
-               }
-+              /*
-+               * When a context becomes inactive, for example,
-+               * disassociation of a station context, the NoA
-+               * attribute needs to be removed from subsequent
-+               * beacons.
-+               */
-+              if (!ctx->active && avp->noa_duration &&
-+                  sc->sched.state != ATH_CHANCTX_STATE_WAIT_FOR_BEACON) {
-+                      avp->noa_duration = 0;
-+                      avp->periodic_noa = false;
-+
-+                      ath_dbg(common, CHAN_CTX,
-+                              "Clearing NoA schedule\n");
-+              }
-+
-               if (sc->sched.state != ATH_CHANCTX_STATE_WAIT_FOR_BEACON)
-                       break;
diff --git a/package/kernel/mac80211/patches/310-ath9k-Use-configurable-timeout-for-flush.patch b/package/kernel/mac80211/patches/310-ath9k-Use-configurable-timeout-for-flush.patch
deleted file mode 100644 (file)
index 3a2c41b..0000000
+++ /dev/null
@@ -1,57 +0,0 @@
-From: Sujith Manoharan <c_manoha@qca.qualcomm.com>
-Date: Fri, 17 Oct 2014 07:40:15 +0530
-Subject: [PATCH] ath9k: Use configurable timeout for flush
-
-The timeout value for flushing the TX queues
-is hardcoded at 200ms right now. Use a channel
-context-specific value instead to allow adjustments
-to the timeout in case MCC is enabled.
-
-Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
----
-
---- a/drivers/net/wireless/ath/ath9k/ath9k.h
-+++ b/drivers/net/wireless/ath/ath9k/ath9k.h
-@@ -345,6 +345,7 @@ struct ath_chanctx {
-       u64 tsf_val;
-       u32 last_beacon;
-+      int flush_timeout;
-       u16 txpower;
-       bool offchannel;
-       bool stopped;
---- a/drivers/net/wireless/ath/ath9k/channel.c
-+++ b/drivers/net/wireless/ath/ath9k/channel.c
-@@ -117,6 +117,7 @@ void ath_chanctx_init(struct ath_softc *
-               cfg80211_chandef_create(&ctx->chandef, chan, NL80211_CHAN_HT20);
-               INIT_LIST_HEAD(&ctx->vifs);
-               ctx->txpower = ATH_TXPOWER_MAX;
-+              ctx->flush_timeout = HZ / 5; /* 200ms */
-               for (j = 0; j < ARRAY_SIZE(ctx->acq); j++)
-                       INIT_LIST_HEAD(&ctx->acq[j]);
-       }
---- a/drivers/net/wireless/ath/ath9k/main.c
-+++ b/drivers/net/wireless/ath/ath9k/main.c
-@@ -2034,7 +2034,7 @@ void __ath9k_flush(struct ieee80211_hw *
-       struct ath_softc *sc = hw->priv;
-       struct ath_hw *ah = sc->sc_ah;
-       struct ath_common *common = ath9k_hw_common(ah);
--      int timeout = HZ / 5; /* 200 ms */
-+      int timeout;
-       bool drain_txq;
-       cancel_delayed_work_sync(&sc->tx_complete_work);
-@@ -2049,6 +2049,13 @@ void __ath9k_flush(struct ieee80211_hw *
-               return;
-       }
-+      spin_lock_bh(&sc->chan_lock);
-+      timeout = sc->cur_chan->flush_timeout;
-+      spin_unlock_bh(&sc->chan_lock);
-+
-+      ath_dbg(common, CHAN_CTX,
-+              "Flush timeout: %d\n", jiffies_to_msecs(timeout));
-+
-       if (wait_event_timeout(sc->tx_wait, !ath9k_has_tx_pending(sc),
-                              timeout) > 0)
-               drop = false;
diff --git a/package/kernel/mac80211/patches/311-ath9k-Fix-MCC-flush-timeout.patch b/package/kernel/mac80211/patches/311-ath9k-Fix-MCC-flush-timeout.patch
deleted file mode 100644 (file)
index 020ac1a..0000000
+++ /dev/null
@@ -1,68 +0,0 @@
-From: Sujith Manoharan <c_manoha@qca.qualcomm.com>
-Date: Fri, 17 Oct 2014 07:40:16 +0530
-Subject: [PATCH] ath9k: Fix MCC flush timeout
-
-In MCC mode, the duration for a channel context
-is half the beacon interval and having a large
-flush timeout will adversely affect GO operation,
-since the default value of 200ms will overshoot
-the advertised NoA absence duration.
-
-The scheduler initiates a channel context switch
-only when the slot duration for the current
-context expires, so there is no possibility of
-having a fixed timeout for flush.
-
-Since the channel_switch_time is added to the
-absence duration when the GO sets up the NoA
-attribute, this is the maximum time that we
-have to flush the TX queues. The duration is very
-small, but we don't have a choice in MCC mode.
-
-Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
----
-
---- a/drivers/net/wireless/ath/ath9k/channel.c
-+++ b/drivers/net/wireless/ath/ath9k/channel.c
-@@ -199,6 +199,7 @@ static const char *chanctx_state_string(
- void ath_chanctx_check_active(struct ath_softc *sc, struct ath_chanctx *ctx)
- {
-       struct ath_common *common = ath9k_hw_common(sc->sc_ah);
-+      struct ath_chanctx *ictx;
-       struct ath_vif *avp;
-       bool active = false;
-       u8 n_active = 0;
-@@ -206,6 +207,8 @@ void ath_chanctx_check_active(struct ath
-       if (!ctx)
-               return;
-+      ictx = ctx;
-+
-       list_for_each_entry(avp, &ctx->vifs, list) {
-               struct ieee80211_vif *vif = avp->vif;
-@@ -228,12 +231,23 @@ void ath_chanctx_check_active(struct ath
-               n_active++;
-       }
-+      spin_lock_bh(&sc->chan_lock);
-+
-       if (n_active <= 1) {
-+              ictx->flush_timeout = HZ / 5;
-               clear_bit(ATH_OP_MULTI_CHANNEL, &common->op_flags);
-+              spin_unlock_bh(&sc->chan_lock);
-               return;
-       }
--      if (test_and_set_bit(ATH_OP_MULTI_CHANNEL, &common->op_flags))
-+
-+      ictx->flush_timeout = usecs_to_jiffies(sc->sched.channel_switch_time);
-+
-+      if (test_and_set_bit(ATH_OP_MULTI_CHANNEL, &common->op_flags)) {
-+              spin_unlock_bh(&sc->chan_lock);
-               return;
-+      }
-+
-+      spin_unlock_bh(&sc->chan_lock);
-       if (ath9k_is_chanctx_enabled()) {
-               ath_chanctx_event(sc, NULL,
diff --git a/package/kernel/mac80211/patches/312-ath9k-Fix-offchannel-flush-timeout.patch b/package/kernel/mac80211/patches/312-ath9k-Fix-offchannel-flush-timeout.patch
deleted file mode 100644 (file)
index 0a4257d..0000000
+++ /dev/null
@@ -1,43 +0,0 @@
-From: Sujith Manoharan <c_manoha@qca.qualcomm.com>
-Date: Fri, 17 Oct 2014 07:40:17 +0530
-Subject: [PATCH] ath9k: Fix offchannel flush timeout
-
-An offchannel operation also needs to have
-a flush timeout that doesn't exceed the NoA
-absence duration of a GO context, so use
-channel_switch_time. The first offchannel
-operation is set a flush timeout of 10ms since
-channel_switch_time will be zero.
-
-Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
----
-
---- a/drivers/net/wireless/ath/ath9k/channel.c
-+++ b/drivers/net/wireless/ath/ath9k/channel.c
-@@ -207,6 +207,26 @@ void ath_chanctx_check_active(struct ath
-       if (!ctx)
-               return;
-+      if (ctx == &sc->offchannel.chan) {
-+              spin_lock_bh(&sc->chan_lock);
-+
-+              if (likely(sc->sched.channel_switch_time))
-+                      ctx->flush_timeout =
-+                              usecs_to_jiffies(sc->sched.channel_switch_time);
-+              else
-+                      ctx->flush_timeout =
-+                              msecs_to_jiffies(10);
-+
-+              spin_unlock_bh(&sc->chan_lock);
-+
-+              /*
-+               * There is no need to iterate over the
-+               * active/assigned channel contexts if
-+               * the current context is offchannel.
-+               */
-+              return;
-+      }
-+
-       ictx = ctx;
-       list_for_each_entry(avp, &ctx->vifs, list) {
diff --git a/package/kernel/mac80211/patches/313-ath9k-Check-for-pending-frames-properly.patch b/package/kernel/mac80211/patches/313-ath9k-Check-for-pending-frames-properly.patch
deleted file mode 100644 (file)
index c1d8791..0000000
+++ /dev/null
@@ -1,125 +0,0 @@
-From: Sujith Manoharan <c_manoha@qca.qualcomm.com>
-Date: Fri, 17 Oct 2014 07:40:18 +0530
-Subject: [PATCH] ath9k: Check for pending frames properly
-
-Pending frames in the driver can be present
-either in the HW queues or SW. ath9k_has_pending_frames()
-currently checks for the HW queues first and then
-checks if any ACs are queued in the driver.
-
-In MCC mode, we need to check the HW queues alone, since
-the SW queues are just marked as 'stopped' - they will
-be processed in the next context switch. But since we
-don't differentiate this now, mention whether we want
-to check if there are frames in the SW queues.
-
-* The flush() callback checks both HW and SW queues.
-* The tx_frames_pending() callback does the same.
-* The call to __ath9k_flush() in MCC mode checks HW queues alone.
-
-Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
----
-
---- a/drivers/net/wireless/ath/ath9k/ath9k.h
-+++ b/drivers/net/wireless/ath/ath9k/ath9k.h
-@@ -715,7 +715,8 @@ int ath_update_survey_stats(struct ath_s
- void ath_update_survey_nf(struct ath_softc *sc, int channel);
- void ath9k_queue_reset(struct ath_softc *sc, enum ath_reset_type type);
- void ath_ps_full_sleep(unsigned long data);
--void __ath9k_flush(struct ieee80211_hw *hw, u32 queues, bool drop);
-+void __ath9k_flush(struct ieee80211_hw *hw, u32 queues, bool drop,
-+                 bool sw_pending);
- /**********/
- /* BTCOEX */
---- a/drivers/net/wireless/ath/ath9k/channel.c
-+++ b/drivers/net/wireless/ath/ath9k/channel.c
-@@ -1137,10 +1137,11 @@ void ath_chanctx_set_next(struct ath_sof
-               ath9k_chanctx_stop_queues(sc, sc->cur_chan);
-               queues_stopped = true;
--              __ath9k_flush(sc->hw, ~0, true);
-+              __ath9k_flush(sc->hw, ~0, true, false);
-               if (ath_chanctx_send_ps_frame(sc, true))
--                      __ath9k_flush(sc->hw, BIT(IEEE80211_AC_VO), false);
-+                      __ath9k_flush(sc->hw, BIT(IEEE80211_AC_VO),
-+                                    false, false);
-               send_ps = true;
-               spin_lock_bh(&sc->chan_lock);
---- a/drivers/net/wireless/ath/ath9k/main.c
-+++ b/drivers/net/wireless/ath/ath9k/main.c
-@@ -54,7 +54,8 @@ u8 ath9k_parse_mpdudensity(u8 mpdudensit
-       }
- }
--static bool ath9k_has_pending_frames(struct ath_softc *sc, struct ath_txq *txq)
-+static bool ath9k_has_pending_frames(struct ath_softc *sc, struct ath_txq *txq,
-+                                   bool sw_pending)
- {
-       bool pending = false;
-@@ -65,6 +66,9 @@ static bool ath9k_has_pending_frames(str
-               goto out;
-       }
-+      if (!sw_pending)
-+              goto out;
-+
-       if (txq->mac80211_qnum >= 0) {
-               struct list_head *list;
-@@ -2003,7 +2007,8 @@ static void ath9k_set_coverage_class(str
-       mutex_unlock(&sc->mutex);
- }
--static bool ath9k_has_tx_pending(struct ath_softc *sc)
-+static bool ath9k_has_tx_pending(struct ath_softc *sc,
-+                               bool sw_pending)
- {
-       int i, npend = 0;
-@@ -2011,7 +2016,8 @@ static bool ath9k_has_tx_pending(struct 
-               if (!ATH_TXQ_SETUP(sc, i))
-                       continue;
--              npend = ath9k_has_pending_frames(sc, &sc->tx.txq[i]);
-+              npend = ath9k_has_pending_frames(sc, &sc->tx.txq[i],
-+                                               sw_pending);
-               if (npend)
-                       break;
-       }
-@@ -2025,11 +2031,12 @@ static void ath9k_flush(struct ieee80211
-       struct ath_softc *sc = hw->priv;
-       mutex_lock(&sc->mutex);
--      __ath9k_flush(hw, queues, drop);
-+      __ath9k_flush(hw, queues, drop, true);
-       mutex_unlock(&sc->mutex);
- }
--void __ath9k_flush(struct ieee80211_hw *hw, u32 queues, bool drop)
-+void __ath9k_flush(struct ieee80211_hw *hw, u32 queues, bool drop,
-+                 bool sw_pending)
- {
-       struct ath_softc *sc = hw->priv;
-       struct ath_hw *ah = sc->sc_ah;
-@@ -2056,7 +2063,7 @@ void __ath9k_flush(struct ieee80211_hw *
-       ath_dbg(common, CHAN_CTX,
-               "Flush timeout: %d\n", jiffies_to_msecs(timeout));
--      if (wait_event_timeout(sc->tx_wait, !ath9k_has_tx_pending(sc),
-+      if (wait_event_timeout(sc->tx_wait, !ath9k_has_tx_pending(sc, sw_pending),
-                              timeout) > 0)
-               drop = false;
-@@ -2079,7 +2086,7 @@ static bool ath9k_tx_frames_pending(stru
- {
-       struct ath_softc *sc = hw->priv;
--      return ath9k_has_tx_pending(sc);
-+      return ath9k_has_tx_pending(sc, true);
- }
- static int ath9k_tx_last_beacon(struct ieee80211_hw *hw)
diff --git a/package/kernel/mac80211/patches/314-ath9k-Send-AUTHORIZED-event-only-for-station-mode.patch b/package/kernel/mac80211/patches/314-ath9k-Send-AUTHORIZED-event-only-for-station-mode.patch
deleted file mode 100644 (file)
index 4c56442..0000000
+++ /dev/null
@@ -1,33 +0,0 @@
-From: Sujith Manoharan <c_manoha@qca.qualcomm.com>
-Date: Fri, 17 Oct 2014 07:40:19 +0530
-Subject: [PATCH] ath9k: Send AUTHORIZED event only for station mode
-
-ATH_CHANCTX_EVENT_AUTHORIZED is required to trigger
-the MCC scheduler when a station interface becomes
-authorized. But, since the driver gets station state
-notifications when the current operating mode is AP
-too, make sure that we send ATH_CHANCTX_EVENT_AUTHORIZED
-only when the interface is in station mode.
-
-Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
----
-
---- a/drivers/net/wireless/ath/ath9k/main.c
-+++ b/drivers/net/wireless/ath/ath9k/main.c
-@@ -1590,10 +1590,12 @@ static int ath9k_sta_state(struct ieee80
-       }
-       if (ath9k_is_chanctx_enabled()) {
--              if (old_state == IEEE80211_STA_ASSOC &&
--                  new_state == IEEE80211_STA_AUTHORIZED)
--                      ath_chanctx_event(sc, vif,
--                                        ATH_CHANCTX_EVENT_AUTHORIZED);
-+              if (vif->type == NL80211_IFTYPE_STATION) {
-+                      if (old_state == IEEE80211_STA_ASSOC &&
-+                          new_state == IEEE80211_STA_AUTHORIZED)
-+                              ath_chanctx_event(sc, vif,
-+                                                ATH_CHANCTX_EVENT_AUTHORIZED);
-+              }
-       }
-       return ret;
diff --git a/package/kernel/mac80211/patches/315-ath9k-Fix-address-management.patch b/package/kernel/mac80211/patches/315-ath9k-Fix-address-management.patch
deleted file mode 100644 (file)
index a407861..0000000
+++ /dev/null
@@ -1,65 +0,0 @@
-From: Sujith Manoharan <c_manoha@qca.qualcomm.com>
-Date: Fri, 17 Oct 2014 07:40:20 +0530
-Subject: [PATCH] ath9k: Fix address management
-
-Since both the arguments need to satisfy
-the alignment requirements of ether_addr_copy(),
-use memcpy() in cases where there will be no
-big performance benefit and make sure that
-ether_addr_copy() calls use properly aligned
-arguments.
-
-Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
----
-
---- a/drivers/net/wireless/ath/ath.h
-+++ b/drivers/net/wireless/ath/ath.h
-@@ -147,7 +147,7 @@ struct ath_common {
-       u16 cachelsz;
-       u16 curaid;
-       u8 macaddr[ETH_ALEN];
--      u8 curbssid[ETH_ALEN];
-+      u8 curbssid[ETH_ALEN] __aligned(2);
-       u8 bssidmask[ETH_ALEN];
-       u32 rx_bufsize;
---- a/drivers/net/wireless/ath/ath9k/ath9k.h
-+++ b/drivers/net/wireless/ath/ath9k/ath9k.h
-@@ -595,7 +595,7 @@ struct ath_vif {
-       u16 seq_no;
-       /* BSS info */
--      u8 bssid[ETH_ALEN];
-+      u8 bssid[ETH_ALEN] __aligned(2);
-       u16 aid;
-       bool assoc;
---- a/drivers/net/wireless/ath/ath9k/main.c
-+++ b/drivers/net/wireless/ath/ath9k/main.c
-@@ -1057,7 +1057,7 @@ static void ath9k_set_offchannel_state(s
-       eth_zero_addr(common->curbssid);
-       eth_broadcast_addr(common->bssidmask);
--      ether_addr_copy(common->macaddr, vif->addr);
-+      memcpy(common->macaddr, vif->addr, ETH_ALEN);
-       common->curaid = 0;
-       ah->opmode = vif->type;
-       ah->imask &= ~ATH9K_INT_SWBA;
-@@ -1098,7 +1098,7 @@ void ath9k_calculate_summary_state(struc
-       ath9k_calculate_iter_data(sc, ctx, &iter_data);
-       if (iter_data.has_hw_macaddr)
--              ether_addr_copy(common->macaddr, iter_data.hw_macaddr);
-+              memcpy(common->macaddr, iter_data.hw_macaddr, ETH_ALEN);
-       memcpy(common->bssidmask, iter_data.mask, ETH_ALEN);
-       ath_hw_setbssidmask(common);
-@@ -1785,7 +1785,7 @@ static void ath9k_bss_info_changed(struc
-               ath_dbg(common, CONFIG, "BSSID %pM Changed ASSOC %d\n",
-                       bss_conf->bssid, bss_conf->assoc);
--              ether_addr_copy(avp->bssid, bss_conf->bssid);
-+              memcpy(avp->bssid, bss_conf->bssid, ETH_ALEN);
-               avp->aid = bss_conf->aid;
-               avp->assoc = bss_conf->assoc;
diff --git a/package/kernel/mac80211/patches/316-ath9k-Add-a-function-to-check-for-an-active-GO.patch b/package/kernel/mac80211/patches/316-ath9k-Add-a-function-to-check-for-an-active-GO.patch
deleted file mode 100644 (file)
index 80b919e..0000000
+++ /dev/null
@@ -1,56 +0,0 @@
-From: Sujith Manoharan <c_manoha@qca.qualcomm.com>
-Date: Fri, 17 Oct 2014 07:40:21 +0530
-Subject: [PATCH] ath9k: Add a function to check for an active GO
-
-Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
----
-
---- a/drivers/net/wireless/ath/ath9k/ath9k.h
-+++ b/drivers/net/wireless/ath/ath9k/ath9k.h
-@@ -469,6 +469,7 @@ void ath_chanctx_set_next(struct ath_sof
- void ath_offchannel_next(struct ath_softc *sc);
- void ath_scan_complete(struct ath_softc *sc, bool abort);
- void ath_roc_complete(struct ath_softc *sc, bool abort);
-+struct ath_chanctx* ath_is_go_chanctx_present(struct ath_softc *sc);
- #else
---- a/drivers/net/wireless/ath/ath9k/channel.c
-+++ b/drivers/net/wireless/ath/ath9k/channel.c
-@@ -146,6 +146,36 @@ void ath_chanctx_set_channel(struct ath_
- #ifdef CPTCFG_ATH9K_CHANNEL_CONTEXT
-+/*************/
-+/* Utilities */
-+/*************/
-+
-+struct ath_chanctx* ath_is_go_chanctx_present(struct ath_softc *sc)
-+{
-+      struct ath_chanctx *ctx;
-+      struct ath_vif *avp;
-+      struct ieee80211_vif *vif;
-+
-+      spin_lock_bh(&sc->chan_lock);
-+
-+      ath_for_each_chanctx(sc, ctx) {
-+              if (!ctx->active)
-+                      continue;
-+
-+              list_for_each_entry(avp, &ctx->vifs, list) {
-+                      vif = avp->vif;
-+
-+                      if (ieee80211_vif_type_p2p(vif) == NL80211_IFTYPE_P2P_GO) {
-+                              spin_unlock_bh(&sc->chan_lock);
-+                              return ctx;
-+                      }
-+              }
-+      }
-+
-+      spin_unlock_bh(&sc->chan_lock);
-+      return NULL;
-+}
-+
- /**********************************************************/
- /* Functions to handle the channel context state machine. */
- /**********************************************************/
diff --git a/package/kernel/mac80211/patches/317-ath9k-Check-for-active-GO-in-mgd_prepare_tx.patch b/package/kernel/mac80211/patches/317-ath9k-Check-for-active-GO-in-mgd_prepare_tx.patch
deleted file mode 100644 (file)
index 6e9aa1f..0000000
+++ /dev/null
@@ -1,134 +0,0 @@
-From: Sujith Manoharan <c_manoha@qca.qualcomm.com>
-Date: Fri, 17 Oct 2014 07:40:22 +0530
-Subject: [PATCH] ath9k: Check for active GO in mgd_prepare_tx()
-
-If a GO interface is active when we receive a
-mgd_prepare_tx() call, then we need to send
-out a new NoA before switching to a new context.
-
-Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
----
-
---- a/drivers/net/wireless/ath/ath9k/ath9k.h
-+++ b/drivers/net/wireless/ath/ath9k/ath9k.h
-@@ -385,6 +385,7 @@ struct ath_chanctx_sched {
-       bool wait_switch;
-       bool force_noa_update;
-       bool extend_absence;
-+      bool mgd_prepare_tx;
-       enum ath_chanctx_state state;
-       u8 beacon_miss;
-@@ -977,6 +978,7 @@ struct ath_softc {
-       struct ath_chanctx_sched sched;
-       struct ath_offchannel offchannel;
-       struct ath_chanctx *next_chan;
-+      struct completion go_beacon;
- #endif
-       unsigned long driver_data;
---- a/drivers/net/wireless/ath/ath9k/channel.c
-+++ b/drivers/net/wireless/ath/ath9k/channel.c
-@@ -421,6 +421,9 @@ void ath_chanctx_event(struct ath_softc 
-                               "Move chanctx state from WAIT_FOR_TIMER to WAIT_FOR_BEACON\n");
-               }
-+              if (sc->sched.mgd_prepare_tx)
-+                      sc->sched.state = ATH_CHANCTX_STATE_WAIT_FOR_BEACON;
-+
-               /*
-                * When a context becomes inactive, for example,
-                * disassociation of a station context, the NoA
-@@ -547,6 +550,15 @@ void ath_chanctx_event(struct ath_softc 
-               }
-               sc->sched.beacon_pending = false;
-+
-+              if (sc->sched.mgd_prepare_tx) {
-+                      sc->sched.mgd_prepare_tx = false;
-+                      complete(&sc->go_beacon);
-+                      ath_dbg(common, CHAN_CTX,
-+                              "Beacon sent, complete go_beacon\n");
-+                      break;
-+              }
-+
-               if (sc->sched.state != ATH_CHANCTX_STATE_WAIT_FOR_BEACON)
-                       break;
-@@ -1263,6 +1275,8 @@ void ath9k_init_channel_context(struct a
-                   (unsigned long)sc);
-       setup_timer(&sc->sched.timer, ath_chanctx_timer,
-                   (unsigned long)sc);
-+
-+      init_completion(&sc->go_beacon);
- }
- void ath9k_deinit_channel_context(struct ath_softc *sc)
---- a/drivers/net/wireless/ath/ath9k/main.c
-+++ b/drivers/net/wireless/ath/ath9k/main.c
-@@ -2474,7 +2474,11 @@ static void ath9k_mgd_prepare_tx(struct 
-       struct ath_softc *sc = hw->priv;
-       struct ath_common *common = ath9k_hw_common(sc->sc_ah);
-       struct ath_vif *avp = (struct ath_vif *) vif->drv_priv;
-+      struct ath_beacon_config *cur_conf;
-+      struct ath_chanctx *go_ctx;
-+      unsigned long timeout;
-       bool changed = false;
-+      u32 beacon_int;
-       if (!test_bit(ATH_OP_MULTI_CHANNEL, &common->op_flags))
-               return;
-@@ -2485,19 +2489,46 @@ static void ath9k_mgd_prepare_tx(struct 
-       mutex_lock(&sc->mutex);
-       spin_lock_bh(&sc->chan_lock);
--      if (sc->next_chan || (sc->cur_chan != avp->chanctx)) {
--              sc->next_chan = avp->chanctx;
-+      if (sc->next_chan || (sc->cur_chan != avp->chanctx))
-               changed = true;
-+      spin_unlock_bh(&sc->chan_lock);
-+
-+      if (!changed)
-+              goto out;
-+
-+      go_ctx = ath_is_go_chanctx_present(sc);
-+
-+      if (go_ctx) {
-+              /*
-+               * Wait till the GO interface gets a chance
-+               * to send out an NoA.
-+               */
-+              spin_lock_bh(&sc->chan_lock);
-+              sc->sched.mgd_prepare_tx = true;
-+              cur_conf = &go_ctx->beacon;
-+              beacon_int = TU_TO_USEC(cur_conf->beacon_interval);
-+              spin_unlock_bh(&sc->chan_lock);
-+
-+              timeout = usecs_to_jiffies(beacon_int);
-+              init_completion(&sc->go_beacon);
-+
-+              if (wait_for_completion_timeout(&sc->go_beacon,
-+                                              timeout) == 0)
-+                      ath_dbg(common, CHAN_CTX,
-+                              "Failed to send new NoA\n");
-       }
-+
-       ath_dbg(common, CHAN_CTX,
--              "%s: Set chanctx state to FORCE_ACTIVE, changed: %d\n",
--              __func__, changed);
-+              "%s: Set chanctx state to FORCE_ACTIVE for vif: %pM\n",
-+              __func__, vif->addr);
-+
-+      spin_lock_bh(&sc->chan_lock);
-+      sc->next_chan = avp->chanctx;
-       sc->sched.state = ATH_CHANCTX_STATE_FORCE_ACTIVE;
-       spin_unlock_bh(&sc->chan_lock);
--      if (changed)
--              ath_chanctx_set_next(sc, true);
--
-+      ath_chanctx_set_next(sc, true);
-+out:
-       mutex_unlock(&sc->mutex);
- }
diff --git a/package/kernel/mac80211/patches/318-ath9k-Use-a-helper-function-for-offchannel-NoA.patch b/package/kernel/mac80211/patches/318-ath9k-Use-a-helper-function-for-offchannel-NoA.patch
deleted file mode 100644 (file)
index e51e2f8..0000000
+++ /dev/null
@@ -1,68 +0,0 @@
-From: Sujith Manoharan <c_manoha@qca.qualcomm.com>
-Date: Fri, 17 Oct 2014 07:40:23 +0530
-Subject: [PATCH] ath9k: Use a helper function for offchannel NoA
-
-Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
----
-
---- a/drivers/net/wireless/ath/ath9k/channel.c
-+++ b/drivers/net/wireless/ath/ath9k/channel.c
-@@ -366,6 +366,32 @@ static void ath_chanctx_setup_timer(stru
-               "Setup chanctx timer with timeout: %d ms\n", jiffies_to_msecs(tsf_time));
- }
-+static void ath_chanctx_offchannel_noa(struct ath_softc *sc,
-+                                     struct ath_chanctx *ctx,
-+                                     struct ath_vif *avp,
-+                                     u32 tsf_time)
-+{
-+      struct ath_common *common = ath9k_hw_common(sc->sc_ah);
-+
-+      avp->noa_index++;
-+      avp->offchannel_start = tsf_time;
-+      avp->offchannel_duration = sc->sched.offchannel_duration;
-+
-+      ath_dbg(common, CHAN_CTX,
-+              "offchannel noa_duration: %d, noa_start: %d, noa_index: %d\n",
-+              avp->offchannel_duration,
-+              avp->offchannel_start,
-+              avp->noa_index);
-+
-+      /*
-+       * When multiple contexts are active, the NoA
-+       * has to be recalculated and advertised after
-+       * an offchannel operation.
-+       */
-+      if (ctx->active && avp->noa_duration)
-+              avp->noa_duration = 0;
-+}
-+
- void ath_chanctx_event(struct ath_softc *sc, struct ieee80211_vif *vif,
-                      enum ath_chanctx_event ev)
- {
-@@ -461,24 +487,7 @@ void ath_chanctx_event(struct ath_softc 
-                * values and increment the index.
-                */
-               if (sc->next_chan == &sc->offchannel.chan) {
--                      avp->noa_index++;
--                      avp->offchannel_start = tsf_time;
--                      avp->offchannel_duration = sc->sched.offchannel_duration;
--
--                      ath_dbg(common, CHAN_CTX,
--                              "offchannel noa_duration: %d, noa_start: %d, noa_index: %d\n",
--                              avp->offchannel_duration,
--                              avp->offchannel_start,
--                              avp->noa_index);
--
--                      /*
--                       * When multiple contexts are active, the NoA
--                       * has to be recalculated and advertised after
--                       * an offchannel operation.
--                       */
--                      if (ctx->active && avp->noa_duration)
--                              avp->noa_duration = 0;
--
-+                      ath_chanctx_offchannel_noa(sc, ctx, avp, tsf_time);
-                       break;
-               }
diff --git a/package/kernel/mac80211/patches/319-ath9k-Use-a-helper-function-to-set-NoA.patch b/package/kernel/mac80211/patches/319-ath9k-Use-a-helper-function-to-set-NoA.patch
deleted file mode 100644 (file)
index e975995..0000000
+++ /dev/null
@@ -1,84 +0,0 @@
-From: Sujith Manoharan <c_manoha@qca.qualcomm.com>
-Date: Fri, 17 Oct 2014 07:40:24 +0530
-Subject: [PATCH] ath9k: Use a helper function to set NoA
-
-Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
----
-
---- a/drivers/net/wireless/ath/ath9k/channel.c
-+++ b/drivers/net/wireless/ath/ath9k/channel.c
-@@ -392,6 +392,39 @@ static void ath_chanctx_offchannel_noa(s
-               avp->noa_duration = 0;
- }
-+static void ath_chanctx_set_periodic_noa(struct ath_softc *sc,
-+                                       struct ath_vif *avp,
-+                                       struct ath_beacon_config *cur_conf,
-+                                       u32 tsf_time,
-+                                       u32 beacon_int)
-+{
-+      struct ath_common *common = ath9k_hw_common(sc->sc_ah);
-+
-+      avp->noa_index++;
-+      avp->noa_start = tsf_time;
-+
-+      if (sc->sched.extend_absence)
-+              avp->noa_duration = (3 * beacon_int / 2) +
-+                      sc->sched.channel_switch_time;
-+      else
-+              avp->noa_duration =
-+                      TU_TO_USEC(cur_conf->beacon_interval) / 2 +
-+                      sc->sched.channel_switch_time;
-+
-+      if (test_bit(ATH_OP_SCANNING, &common->op_flags) ||
-+          sc->sched.extend_absence)
-+              avp->periodic_noa = false;
-+      else
-+              avp->periodic_noa = true;
-+
-+      ath_dbg(common, CHAN_CTX,
-+              "noa_duration: %d, noa_start: %d, noa_index: %d, periodic: %d\n",
-+              avp->noa_duration,
-+              avp->noa_start,
-+              avp->noa_index,
-+              avp->periodic_noa);
-+}
-+
- void ath_chanctx_event(struct ath_softc *sc, struct ieee80211_vif *vif,
-                      enum ath_chanctx_event ev)
- {
-@@ -521,31 +554,9 @@ void ath_chanctx_event(struct ath_softc 
-                * announcement.
-                */
-               if (ctx->active &&
--                  (!avp->noa_duration || sc->sched.force_noa_update)) {
--                      avp->noa_index++;
--                      avp->noa_start = tsf_time;
--
--                      if (sc->sched.extend_absence)
--                              avp->noa_duration = (3 * beacon_int / 2) +
--                                      sc->sched.channel_switch_time;
--                      else
--                              avp->noa_duration =
--                                      TU_TO_USEC(cur_conf->beacon_interval) / 2 +
--                                      sc->sched.channel_switch_time;
--
--                      if (test_bit(ATH_OP_SCANNING, &common->op_flags) ||
--                          sc->sched.extend_absence)
--                              avp->periodic_noa = false;
--                      else
--                              avp->periodic_noa = true;
--
--                      ath_dbg(common, CHAN_CTX,
--                              "noa_duration: %d, noa_start: %d, noa_index: %d, periodic: %d\n",
--                              avp->noa_duration,
--                              avp->noa_start,
--                              avp->noa_index,
--                              avp->periodic_noa);
--              }
-+                  (!avp->noa_duration || sc->sched.force_noa_update))
-+                      ath_chanctx_set_periodic_noa(sc, avp, cur_conf,
-+                                                   tsf_time, beacon_int);
-               if (ctx->active && sc->sched.force_noa_update)
-                       sc->sched.force_noa_update = false;
diff --git a/package/kernel/mac80211/patches/320-ath9k-Use-a-helper-function-for-bmiss.patch b/package/kernel/mac80211/patches/320-ath9k-Use-a-helper-function-for-bmiss.patch
deleted file mode 100644 (file)
index 03b76ec..0000000
+++ /dev/null
@@ -1,68 +0,0 @@
-From: Sujith Manoharan <c_manoha@qca.qualcomm.com>
-Date: Fri, 17 Oct 2014 07:40:25 +0530
-Subject: [PATCH] ath9k: Use a helper function for bmiss
-
-Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
----
-
---- a/drivers/net/wireless/ath/ath9k/channel.c
-+++ b/drivers/net/wireless/ath/ath9k/channel.c
-@@ -366,6 +366,31 @@ static void ath_chanctx_setup_timer(stru
-               "Setup chanctx timer with timeout: %d ms\n", jiffies_to_msecs(tsf_time));
- }
-+static void ath_chanctx_handle_bmiss(struct ath_softc *sc,
-+                                   struct ath_chanctx *ctx,
-+                                   struct ath_vif *avp)
-+{
-+      /*
-+       * Clear the extend_absence flag if it had been
-+       * set during the previous beacon transmission,
-+       * since we need to revert to the normal NoA
-+       * schedule.
-+       */
-+      if (ctx->active && sc->sched.extend_absence) {
-+              avp->noa_duration = 0;
-+              sc->sched.extend_absence = false;
-+      }
-+
-+      /* If at least two consecutive beacons were missed on the STA
-+       * chanctx, stay on the STA channel for one extra beacon period,
-+       * to resync the timer properly.
-+       */
-+      if (ctx->active && sc->sched.beacon_miss >= 2) {
-+              avp->noa_duration = 0;
-+              sc->sched.extend_absence = true;
-+      }
-+}
-+
- static void ath_chanctx_offchannel_noa(struct ath_softc *sc,
-                                      struct ath_chanctx *ctx,
-                                      struct ath_vif *avp,
-@@ -524,25 +549,7 @@ void ath_chanctx_event(struct ath_softc 
-                       break;
-               }
--              /*
--               * Clear the extend_absence flag if it had been
--               * set during the previous beacon transmission,
--               * since we need to revert to the normal NoA
--               * schedule.
--               */
--              if (ctx->active && sc->sched.extend_absence) {
--                      avp->noa_duration = 0;
--                      sc->sched.extend_absence = false;
--              }
--
--              /* If at least two consecutive beacons were missed on the STA
--               * chanctx, stay on the STA channel for one extra beacon period,
--               * to resync the timer properly.
--               */
--              if (ctx->active && sc->sched.beacon_miss >= 2) {
--                      avp->noa_duration = 0;
--                      sc->sched.extend_absence = true;
--              }
-+              ath_chanctx_handle_bmiss(sc, ctx, avp);
-               /* Prevent wrap-around issues */
-               if (avp->noa_duration && tsf_time - avp->noa_start > BIT(30))
diff --git a/package/kernel/mac80211/patches/321-ath9k-Fix-RoC-expiration.patch b/package/kernel/mac80211/patches/321-ath9k-Fix-RoC-expiration.patch
deleted file mode 100644 (file)
index 5a99a33..0000000
+++ /dev/null
@@ -1,38 +0,0 @@
-From: Sujith Manoharan <c_manoha@qca.qualcomm.com>
-Date: Fri, 17 Oct 2014 07:40:26 +0530
-Subject: [PATCH] ath9k: Fix RoC expiration
-
-mac80211 has to be notified when a RoC period
-expires in the driver. In MCC mode, since the
-offchannel/RoC timer is set with the requested
-duration, ieee80211_remain_on_channel_expired() needs
-to be called when the timer expires.
-
-But, currently it is done after we move back to
-the operating channel. This is incorrect - fix this
-by calling ieee80211_remain_on_channel_expired() when
-the RoC timer expires and in ath_roc_complete() when
-the RoC request is aborted.
-
-Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
----
-
---- a/drivers/net/wireless/ath/ath9k/channel.c
-+++ b/drivers/net/wireless/ath/ath9k/channel.c
-@@ -894,7 +894,7 @@ void ath_roc_complete(struct ath_softc *
-       sc->offchannel.roc_vif = NULL;
-       sc->offchannel.roc_chan = NULL;
--      if (!abort)
-+      if (abort)
-               ieee80211_remain_on_channel_expired(sc->hw);
-       ath_offchannel_next(sc);
-       ath9k_ps_restore(sc);
-@@ -1028,6 +1028,7 @@ static void ath_offchannel_timer(unsigne
-       case ATH_OFFCHANNEL_ROC_WAIT:
-               ctx = ath_chanctx_get_oper_chan(sc, false);
-               sc->offchannel.state = ATH_OFFCHANNEL_ROC_DONE;
-+              ieee80211_remain_on_channel_expired(sc->hw);
-               ath_chanctx_switch(sc, ctx, NULL);
-               break;
-       default:
diff --git a/package/kernel/mac80211/patches/322-ath9k-Send-oneshot-NoA.patch b/package/kernel/mac80211/patches/322-ath9k-Send-oneshot-NoA.patch
deleted file mode 100644 (file)
index 331d714..0000000
+++ /dev/null
@@ -1,85 +0,0 @@
-From: Sujith Manoharan <c_manoha@qca.qualcomm.com>
-Date: Fri, 17 Oct 2014 07:40:27 +0530
-Subject: [PATCH] ath9k: Send oneshot NoA
-
-This patch makes sure that a GO interface
-sends out a new NoA schedule with 200ms duration
-when mgd_prepare_tx() is called.
-
-Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
----
-
---- a/drivers/net/wireless/ath/ath9k/ath9k.h
-+++ b/drivers/net/wireless/ath/ath9k/ath9k.h
-@@ -620,6 +620,7 @@ struct ath_vif {
-       u32 noa_start;
-       u32 noa_duration;
-       bool periodic_noa;
-+      bool oneshot_noa;
- };
- struct ath9k_vif_iter_data {
---- a/drivers/net/wireless/ath/ath9k/channel.c
-+++ b/drivers/net/wireless/ath/ath9k/channel.c
-@@ -450,6 +450,27 @@ static void ath_chanctx_set_periodic_noa
-               avp->periodic_noa);
- }
-+static void ath_chanctx_set_oneshot_noa(struct ath_softc *sc,
-+                                      struct ath_vif *avp,
-+                                      u32 tsf_time,
-+                                      u32 duration)
-+{
-+      struct ath_common *common = ath9k_hw_common(sc->sc_ah);
-+
-+      avp->noa_index++;
-+      avp->noa_start = tsf_time;
-+      avp->periodic_noa = false;
-+      avp->oneshot_noa = true;
-+      avp->noa_duration = duration + sc->sched.channel_switch_time;
-+
-+      ath_dbg(common, CHAN_CTX,
-+              "oneshot noa_duration: %d, noa_start: %d, noa_index: %d, periodic: %d\n",
-+              avp->noa_duration,
-+              avp->noa_start,
-+              avp->noa_index,
-+              avp->periodic_noa);
-+}
-+
- void ath_chanctx_event(struct ath_softc *sc, struct ieee80211_vif *vif,
-                      enum ath_chanctx_event ev)
- {
-@@ -476,6 +497,14 @@ void ath_chanctx_event(struct ath_softc 
-               if (avp->offchannel_duration)
-                       avp->offchannel_duration = 0;
-+              if (avp->oneshot_noa) {
-+                      avp->noa_duration = 0;
-+                      avp->oneshot_noa = false;
-+
-+                      ath_dbg(common, CHAN_CTX,
-+                              "Clearing oneshot NoA\n");
-+              }
-+
-               if (avp->chanctx != sc->cur_chan) {
-                       ath_dbg(common, CHAN_CTX,
-                               "Contexts differ, not preparing beacon\n");
-@@ -551,6 +580,18 @@ void ath_chanctx_event(struct ath_softc 
-               ath_chanctx_handle_bmiss(sc, ctx, avp);
-+              /*
-+               * If a mgd_prepare_tx() has been called by mac80211,
-+               * a one-shot NoA needs to be sent. This can happen
-+               * with one or more active channel contexts - in both
-+               * cases, a new NoA schedule has to be advertised.
-+               */
-+              if (sc->sched.mgd_prepare_tx) {
-+                      ath_chanctx_set_oneshot_noa(sc, avp, tsf_time,
-+                                                  jiffies_to_usecs(HZ / 5));
-+                      break;
-+              }
-+
-               /* Prevent wrap-around issues */
-               if (avp->noa_duration && tsf_time - avp->noa_start > BIT(30))
-                       avp->noa_duration = 0;
diff --git a/package/kernel/mac80211/patches/323-ath9k-Fix-HW-scan-abort.patch b/package/kernel/mac80211/patches/323-ath9k-Fix-HW-scan-abort.patch
deleted file mode 100644 (file)
index 56c0489..0000000
+++ /dev/null
@@ -1,68 +0,0 @@
-From: Sujith Manoharan <c_manoha@qca.qualcomm.com>
-Date: Fri, 17 Oct 2014 07:40:28 +0530
-Subject: [PATCH] ath9k: Fix HW scan abort
-
-Instead of using ATH_CHANCTX_EVENT_ASSIGN to abort
-a HW scan when a new interface becomes active, use the
-mgd_prepare_tx() callback. This allows us to make
-sure that the GO's channel becomes operational by
-using flush_work().
-
-Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
----
-
---- a/drivers/net/wireless/ath/ath9k/channel.c
-+++ b/drivers/net/wireless/ath/ath9k/channel.c
-@@ -743,22 +743,6 @@ void ath_chanctx_event(struct ath_softc 
-               ieee80211_queue_work(sc->hw, &sc->chanctx_work);
-               break;
-       case ATH_CHANCTX_EVENT_ASSIGN:
--              /*
--               * When adding a new channel context, check if a scan
--               * is in progress and abort it since the addition of
--               * a new channel context is usually followed by VIF
--               * assignment, in which case we have to start multi-channel
--               * operation.
--               */
--              if (test_bit(ATH_OP_SCANNING, &common->op_flags)) {
--                      ath_dbg(common, CHAN_CTX,
--                              "Aborting HW scan to add new context\n");
--
--                      spin_unlock_bh(&sc->chan_lock);
--                      del_timer_sync(&sc->offchannel.timer);
--                      ath_scan_complete(sc, true);
--                      spin_lock_bh(&sc->chan_lock);
--              }
-               break;
-       case ATH_CHANCTX_EVENT_CHANGE:
-               break;
---- a/drivers/net/wireless/ath/ath9k/main.c
-+++ b/drivers/net/wireless/ath/ath9k/main.c
-@@ -2365,7 +2365,6 @@ static int ath9k_add_chanctx(struct ieee
-                       conf->def.chan->center_freq);
-               ath_chanctx_set_channel(sc, ctx, &conf->def);
--              ath_chanctx_event(sc, NULL, ATH_CHANCTX_EVENT_ASSIGN);
-               mutex_unlock(&sc->mutex);
-               return 0;
-@@ -2496,6 +2495,19 @@ static void ath9k_mgd_prepare_tx(struct 
-       if (!changed)
-               goto out;
-+      if (test_bit(ATH_OP_SCANNING, &common->op_flags)) {
-+              ath_dbg(common, CHAN_CTX,
-+                      "%s: Aborting HW scan\n", __func__);
-+
-+              mutex_unlock(&sc->mutex);
-+
-+              del_timer_sync(&sc->offchannel.timer);
-+              ath_scan_complete(sc, true);
-+              flush_work(&sc->chanctx_work);
-+
-+              mutex_lock(&sc->mutex);
-+      }
-+
-       go_ctx = ath_is_go_chanctx_present(sc);
-       if (go_ctx) {
diff --git a/package/kernel/mac80211/patches/324-ath9k-Improve-flush-in-mcc-mode.patch b/package/kernel/mac80211/patches/324-ath9k-Improve-flush-in-mcc-mode.patch
deleted file mode 100644 (file)
index 40e095b..0000000
+++ /dev/null
@@ -1,95 +0,0 @@
-From: Sujith Manoharan <c_manoha@qca.qualcomm.com>
-Date: Fri, 17 Oct 2014 07:40:29 +0530
-Subject: [PATCH] ath9k: Improve flush() in mcc mode
-
-The flush timeout in MCC mode is very small, since
-we are constrained by the time slice for each
-channel context, but since only the HW queues are
-flushed when switching contexts, it is acceptable.
-
-Since the SW queues are also emptied in the mac80211 flush()
-callback, a larger duration is needed. Add an override
-argument to __ath9k_flush() and set it when flush()
-is called in MCC mode. This allows the driver to
-drain both the SW and HW queues.
-
-Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
----
-
---- a/drivers/net/wireless/ath/ath9k/ath9k.h
-+++ b/drivers/net/wireless/ath/ath9k/ath9k.h
-@@ -719,7 +719,7 @@ void ath_update_survey_nf(struct ath_sof
- void ath9k_queue_reset(struct ath_softc *sc, enum ath_reset_type type);
- void ath_ps_full_sleep(unsigned long data);
- void __ath9k_flush(struct ieee80211_hw *hw, u32 queues, bool drop,
--                 bool sw_pending);
-+                 bool sw_pending, bool timeout_override);
- /**********/
- /* BTCOEX */
---- a/drivers/net/wireless/ath/ath9k/channel.c
-+++ b/drivers/net/wireless/ath/ath9k/channel.c
-@@ -1232,11 +1232,11 @@ void ath_chanctx_set_next(struct ath_sof
-               ath9k_chanctx_stop_queues(sc, sc->cur_chan);
-               queues_stopped = true;
--              __ath9k_flush(sc->hw, ~0, true, false);
-+              __ath9k_flush(sc->hw, ~0, true, false, false);
-               if (ath_chanctx_send_ps_frame(sc, true))
-                       __ath9k_flush(sc->hw, BIT(IEEE80211_AC_VO),
--                                    false, false);
-+                                    false, false, false);
-               send_ps = true;
-               spin_lock_bh(&sc->chan_lock);
---- a/drivers/net/wireless/ath/ath9k/main.c
-+++ b/drivers/net/wireless/ath/ath9k/main.c
-@@ -2031,14 +2031,33 @@ static void ath9k_flush(struct ieee80211
-                       u32 queues, bool drop)
- {
-       struct ath_softc *sc = hw->priv;
-+      struct ath_common *common = ath9k_hw_common(sc->sc_ah);
-+
-+      if (ath9k_is_chanctx_enabled()) {
-+              if (!test_bit(ATH_OP_MULTI_CHANNEL, &common->op_flags))
-+                      goto flush;
-+              /*
-+               * If MCC is active, extend the flush timeout
-+               * and wait for the HW/SW queues to become
-+               * empty. This needs to be done outside the
-+               * sc->mutex lock to allow the channel scheduler
-+               * to switch channel contexts.
-+               *
-+               * The vif queues have been stopped in mac80211,
-+               * so there won't be any incoming frames.
-+               */
-+              __ath9k_flush(hw, queues, drop, true, true);
-+              return;
-+      }
-+flush:
-       mutex_lock(&sc->mutex);
--      __ath9k_flush(hw, queues, drop, true);
-+      __ath9k_flush(hw, queues, drop, true, false);
-       mutex_unlock(&sc->mutex);
- }
- void __ath9k_flush(struct ieee80211_hw *hw, u32 queues, bool drop,
--                 bool sw_pending)
-+                 bool sw_pending, bool timeout_override)
- {
-       struct ath_softc *sc = hw->priv;
-       struct ath_hw *ah = sc->sc_ah;
-@@ -2059,7 +2078,10 @@ void __ath9k_flush(struct ieee80211_hw *
-       }
-       spin_lock_bh(&sc->chan_lock);
--      timeout = sc->cur_chan->flush_timeout;
-+      if (timeout_override)
-+              timeout = HZ / 5;
-+      else
-+              timeout = sc->cur_chan->flush_timeout;
-       spin_unlock_bh(&sc->chan_lock);
-       ath_dbg(common, CHAN_CTX,
diff --git a/package/kernel/mac80211/patches/325-ath9k-Do-not-start-BA-when-scanning.patch b/package/kernel/mac80211/patches/325-ath9k-Do-not-start-BA-when-scanning.patch
deleted file mode 100644 (file)
index 69eb58c..0000000
+++ /dev/null
@@ -1,60 +0,0 @@
-From: Sujith Manoharan <c_manoha@qca.qualcomm.com>
-Date: Fri, 17 Oct 2014 07:40:30 +0530
-Subject: [PATCH] ath9k: Do not start BA when scanning
-
-mac80211 currently has a race which can be hit
-with this sequence:
-
-* Start a scan operation.
-* TX BA is initiated by ieee80211_start_tx_ba_session().
-* Driver sets up internal state and calls
-  ieee80211_start_tx_ba_cb_irqsafe().
-* mac80211 adds a packet to sdata->skb_queue with
-  type IEEE80211_SDATA_QUEUE_AGG_START.
-* ieee80211_iface_work() doesn't process the
-  packet because scan is in progress.
-* ADDBA response timer expires and the sta/tid is
-  torn down.
-* Driver receives BA stop notification and calls
-  ieee80211_stop_tx_ba_cb_irqsafe().
-* This is also added to the queue by mac80211.
-* Now, scan finishes.
-
-At this point, the queued up packets might be processed
-if some other operation schedules the sdata work. Since
-the tids have been cleaned up already, warnings are hit.
-
-If this doesn't happen, the packets are left in the queue
-until the interface is torn down.
-
-Since initiating a BA session when scan is in progress
-leads to flaky connections, especially in MCC mode, we
-can drop the TX BA request. This improves connectivity
-with legacy clients in MCC mode.
-
-Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
----
-
---- a/drivers/net/wireless/ath/ath9k/main.c
-+++ b/drivers/net/wireless/ath/ath9k/main.c
-@@ -1885,6 +1885,7 @@ static int ath9k_ampdu_action(struct iee
-                             u16 tid, u16 *ssn, u8 buf_size)
- {
-       struct ath_softc *sc = hw->priv;
-+      struct ath_common *common = ath9k_hw_common(sc->sc_ah);
-       bool flush = false;
-       int ret = 0;
-@@ -1896,6 +1897,12 @@ static int ath9k_ampdu_action(struct iee
-       case IEEE80211_AMPDU_RX_STOP:
-               break;
-       case IEEE80211_AMPDU_TX_START:
-+              if (ath9k_is_chanctx_enabled()) {
-+                      if (test_bit(ATH_OP_SCANNING, &common->op_flags)) {
-+                              ret = -EBUSY;
-+                              break;
-+                      }
-+              }
-               ath9k_ps_wakeup(sc);
-               ret = ath_tx_aggr_start(sc, sta, tid, ssn);
-               if (!ret)
diff --git a/package/kernel/mac80211/patches/326-ath9k_hw-make-support-for-PC-OEM-cards-optional.patch b/package/kernel/mac80211/patches/326-ath9k_hw-make-support-for-PC-OEM-cards-optional.patch
deleted file mode 100644 (file)
index afc8f74..0000000
+++ /dev/null
@@ -1,259 +0,0 @@
-From: Felix Fietkau <nbd@openwrt.org>
-Date: Sat, 18 Oct 2014 13:23:34 +0200
-Subject: [PATCH] ath9k_hw: make support for PC-OEM cards optional
-
-The initvals use up quite a bit of space, and PC-OEM support is
-typically not needed on embedded systems
-
-Signed-off-by: Felix Fietkau <nbd@openwrt.org>
----
-
---- a/drivers/net/wireless/ath/ath9k/Kconfig
-+++ b/drivers/net/wireless/ath/ath9k/Kconfig
-@@ -151,6 +151,11 @@ config ATH9K_CHANNEL_CONTEXT
-        for multi-channel concurrency. Enable this if P2P PowerSave support
-        is required.
-+config ATH9K_PCOEM
-+      bool "Atheros ath9k support for PC OEM cards" if EXPERT
-+      depends on ATH9K
-+      default y
-+
- config ATH9K_HTC
-        tristate "Atheros HTC based wireless cards support"
-        depends on m
---- a/drivers/net/wireless/ath/ath9k/Makefile
-+++ b/drivers/net/wireless/ath/ath9k/Makefile
-@@ -32,7 +32,6 @@ ath9k_hw-y:= \
-               ar5008_phy.o \
-               ar9002_calib.o \
-               ar9003_calib.o \
--              ar9003_rtt.o \
-               calib.o \
-               eeprom.o \
-               eeprom_def.o \
-@@ -50,6 +49,8 @@ ath9k_hw-$(CPTCFG_ATH9K_WOW) += ar9003_w
- ath9k_hw-$(CPTCFG_ATH9K_BTCOEX_SUPPORT) += btcoex.o \
-                                          ar9003_mci.o
-+ath9k_hw-$(CPTCFG_ATH9K_PCOEM) += ar9003_rtt.o
-+
- ath9k_hw-$(CPTCFG_ATH9K_DYNACK) += dynack.o
- obj-$(CPTCFG_ATH9K_HW) += ath9k_hw.o
---- a/drivers/net/wireless/ath/ath9k/ar9003_rtt.h
-+++ b/drivers/net/wireless/ath/ath9k/ar9003_rtt.h
-@@ -17,6 +17,7 @@
- #ifndef AR9003_RTT_H
- #define AR9003_RTT_H
-+#ifdef CPTCFG_ATH9K_PCOEM
- void ar9003_hw_rtt_enable(struct ath_hw *ah);
- void ar9003_hw_rtt_disable(struct ath_hw *ah);
- void ar9003_hw_rtt_set_mask(struct ath_hw *ah, u32 rtt_mask);
-@@ -25,5 +26,40 @@ void ar9003_hw_rtt_load_hist(struct ath_
- void ar9003_hw_rtt_fill_hist(struct ath_hw *ah);
- void ar9003_hw_rtt_clear_hist(struct ath_hw *ah);
- bool ar9003_hw_rtt_restore(struct ath_hw *ah, struct ath9k_channel *chan);
-+#else
-+static inline void ar9003_hw_rtt_enable(struct ath_hw *ah)
-+{
-+}
-+
-+static inline void ar9003_hw_rtt_disable(struct ath_hw *ah)
-+{
-+}
-+
-+static inline void ar9003_hw_rtt_set_mask(struct ath_hw *ah, u32 rtt_mask)
-+{
-+}
-+
-+static inline bool ar9003_hw_rtt_force_restore(struct ath_hw *ah)
-+{
-+      return false;
-+}
-+
-+static inline void ar9003_hw_rtt_load_hist(struct ath_hw *ah)
-+{
-+}
-+
-+static inline void ar9003_hw_rtt_fill_hist(struct ath_hw *ah)
-+{
-+}
-+
-+static inline void ar9003_hw_rtt_clear_hist(struct ath_hw *ah)
-+{
-+}
-+
-+static inline bool ar9003_hw_rtt_restore(struct ath_hw *ah, struct ath9k_channel *chan)
-+{
-+      return false;
-+}
-+#endif
- #endif
---- a/drivers/net/wireless/ath/ath9k/hw.h
-+++ b/drivers/net/wireless/ath/ath9k/hw.h
-@@ -244,13 +244,20 @@ enum ath9k_hw_caps {
-       ATH9K_HW_CAP_2GHZ                       = BIT(11),
-       ATH9K_HW_CAP_5GHZ                       = BIT(12),
-       ATH9K_HW_CAP_APM                        = BIT(13),
-+#ifdef CPTCFG_ATH9K_PCOEM
-       ATH9K_HW_CAP_RTT                        = BIT(14),
-       ATH9K_HW_CAP_MCI                        = BIT(15),
--      ATH9K_HW_CAP_DFS                        = BIT(16),
--      ATH9K_HW_WOW_DEVICE_CAPABLE             = BIT(17),
--      ATH9K_HW_CAP_PAPRD                      = BIT(18),
--      ATH9K_HW_CAP_FCC_BAND_SWITCH            = BIT(19),
--      ATH9K_HW_CAP_BT_ANT_DIV                 = BIT(20),
-+      ATH9K_HW_WOW_DEVICE_CAPABLE             = BIT(16),
-+      ATH9K_HW_CAP_BT_ANT_DIV                 = BIT(17),
-+#else
-+      ATH9K_HW_CAP_RTT                        = 0,
-+      ATH9K_HW_CAP_MCI                        = 0,
-+      ATH9K_HW_WOW_DEVICE_CAPABLE             = 0,
-+      ATH9K_HW_CAP_BT_ANT_DIV                 = 0,
-+#endif
-+      ATH9K_HW_CAP_DFS                        = BIT(18),
-+      ATH9K_HW_CAP_PAPRD                      = BIT(19),
-+      ATH9K_HW_CAP_FCC_BAND_SWITCH            = BIT(20),
- };
- /*
---- a/drivers/net/wireless/ath/ath9k/init.c
-+++ b/drivers/net/wireless/ath/ath9k/init.c
-@@ -362,6 +362,9 @@ static void ath9k_init_pcoem_platform(st
-       struct ath9k_hw_capabilities *pCap = &ah->caps;
-       struct ath_common *common = ath9k_hw_common(ah);
-+      if (!IS_ENABLED(CPTCFG_ATH9K_PCOEM))
-+              return;
-+
-       if (common->bus_ops->ath_bus_type != ATH_PCI)
-               return;
---- a/drivers/net/wireless/ath/ath9k/pci.c
-+++ b/drivers/net/wireless/ath/ath9k/pci.c
-@@ -30,6 +30,7 @@ static const struct pci_device_id ath_pc
-       { PCI_VDEVICE(ATHEROS, 0x0029) }, /* PCI   */
-       { PCI_VDEVICE(ATHEROS, 0x002A) }, /* PCI-E */
-+#ifdef CPTCFG_ATH9K_PCOEM
-       { PCI_DEVICE_SUB(PCI_VENDOR_ID_ATHEROS,
-                        0x002A,
-                        PCI_VENDOR_ID_AZWAVE,
-@@ -82,6 +83,7 @@ static const struct pci_device_id ath_pc
-                        PCI_VENDOR_ID_AZWAVE,
-                        0x2C37),
-         .driver_data = ATH9K_PCI_BT_ANT_DIV },
-+#endif
-       { PCI_VDEVICE(ATHEROS, 0x002B) }, /* PCI-E */
-       { PCI_VDEVICE(ATHEROS, 0x002C) }, /* PCI-E 802.11n bonded out */
-@@ -102,6 +104,7 @@ static const struct pci_device_id ath_pc
-       { PCI_VDEVICE(ATHEROS, 0x0030) }, /* PCI-E  AR9300 */
-+#ifdef CPTCFG_ATH9K_PCOEM
-       /* PCI-E CUS198 */
-       { PCI_DEVICE_SUB(PCI_VENDOR_ID_ATHEROS,
-                        0x0032,
-@@ -294,10 +297,12 @@ static const struct pci_device_id ath_pc
-                        PCI_VENDOR_ID_ASUSTEK,
-                        0x850D),
-         .driver_data = ATH9K_PCI_NO_PLL_PWRSAVE },
-+#endif
-       { PCI_VDEVICE(ATHEROS, 0x0032) }, /* PCI-E  AR9485 */
-       { PCI_VDEVICE(ATHEROS, 0x0033) }, /* PCI-E  AR9580 */
-+#ifdef CPTCFG_ATH9K_PCOEM
-       /* PCI-E CUS217 */
-       { PCI_DEVICE_SUB(PCI_VENDOR_ID_ATHEROS,
-                        0x0034,
-@@ -657,6 +662,7 @@ static const struct pci_device_id ath_pc
-       /* PCI-E AR9565 (WB335) */
-       { PCI_VDEVICE(ATHEROS, 0x0036),
-         .driver_data = ATH9K_PCI_BT_ANT_DIV },
-+#endif
-       { 0 }
- };
---- a/drivers/net/wireless/ath/ath9k/reg.h
-+++ b/drivers/net/wireless/ath/ath9k/reg.h
-@@ -892,10 +892,21 @@
-       (AR_SREV_9330((_ah)) && \
-        ((_ah)->hw_version.macRev == AR_SREV_REVISION_9330_12))
-+#ifdef CPTCFG_ATH9K_PCOEM
-+#define AR_SREV_9462(_ah) \
-+      (((_ah)->hw_version.macVersion == AR_SREV_VERSION_9462))
- #define AR_SREV_9485(_ah) \
-       (((_ah)->hw_version.macVersion == AR_SREV_VERSION_9485))
-+#define AR_SREV_9565(_ah) \
-+      (((_ah)->hw_version.macVersion == AR_SREV_VERSION_9565))
-+#else
-+#define AR_SREV_9462(_ah) 0
-+#define AR_SREV_9485(_ah) 0
-+#define AR_SREV_9565(_ah) 0
-+#endif
-+
- #define AR_SREV_9485_11_OR_LATER(_ah) \
--      (((_ah)->hw_version.macVersion == AR_SREV_VERSION_9485) && \
-+      (AR_SREV_9485(_ah) && \
-        ((_ah)->hw_version.macRev >= AR_SREV_REVISION_9485_11))
- #define AR_SREV_9485_OR_LATER(_ah) \
-       (((_ah)->hw_version.macVersion >= AR_SREV_VERSION_9485))
-@@ -915,34 +926,30 @@
-     (AR_SREV_9285_12_OR_LATER(_ah) && \
-      ((REG_READ(_ah, AR_AN_SYNTH9) & 0x7) == 0x1))
--#define AR_SREV_9462(_ah) \
--      (((_ah)->hw_version.macVersion == AR_SREV_VERSION_9462))
- #define AR_SREV_9462_20(_ah) \
--      (((_ah)->hw_version.macVersion == AR_SREV_VERSION_9462) && \
-+      (AR_SREV_9462(_ah) && \
-        ((_ah)->hw_version.macRev == AR_SREV_REVISION_9462_20))
- #define AR_SREV_9462_21(_ah) \
--      (((_ah)->hw_version.macVersion == AR_SREV_VERSION_9462) && \
-+      (AR_SREV_9462(_ah) && \
-        ((_ah)->hw_version.macRev == AR_SREV_REVISION_9462_21))
- #define AR_SREV_9462_20_OR_LATER(_ah) \
--      (((_ah)->hw_version.macVersion == AR_SREV_VERSION_9462) && \
-+      (AR_SREV_9462(_ah) && \
-        ((_ah)->hw_version.macRev >= AR_SREV_REVISION_9462_20))
- #define AR_SREV_9462_21_OR_LATER(_ah) \
--      (((_ah)->hw_version.macVersion == AR_SREV_VERSION_9462) && \
-+      (AR_SREV_9462(_ah) && \
-        ((_ah)->hw_version.macRev >= AR_SREV_REVISION_9462_21))
--#define AR_SREV_9565(_ah) \
--      (((_ah)->hw_version.macVersion == AR_SREV_VERSION_9565))
- #define AR_SREV_9565_10(_ah) \
--      (((_ah)->hw_version.macVersion == AR_SREV_VERSION_9565) && \
-+      (AR_SREV_9565(_ah) && \
-        ((_ah)->hw_version.macRev == AR_SREV_REVISION_9565_10))
- #define AR_SREV_9565_101(_ah) \
--      (((_ah)->hw_version.macVersion == AR_SREV_VERSION_9565) && \
-+      (AR_SREV_9565(_ah) && \
-        ((_ah)->hw_version.macRev == AR_SREV_REVISION_9565_101))
- #define AR_SREV_9565_11(_ah) \
--      (((_ah)->hw_version.macVersion == AR_SREV_VERSION_9565) && \
-+      (AR_SREV_9565(_ah) && \
-        ((_ah)->hw_version.macRev == AR_SREV_REVISION_9565_11))
- #define AR_SREV_9565_11_OR_LATER(_ah) \
--      (((_ah)->hw_version.macVersion == AR_SREV_VERSION_9565) && \
-+      (AR_SREV_9565(_ah) && \
-        ((_ah)->hw_version.macRev >= AR_SREV_REVISION_9565_11))
- #define AR_SREV_9550(_ah) \
---- a/.local-symbols
-+++ b/.local-symbols
-@@ -124,6 +124,7 @@ ATH9K_HW=
- ATH9K_COMMON=
- ATH9K_DFS_DEBUGFS=
- ATH9K_BTCOEX_SUPPORT=
-+ATH9K_PCOEM=
- ATH9K=
- ATH9K_PCI=
- ATH9K_AHB=
diff --git a/package/kernel/mac80211/patches/327-ath9k_hw-remove-support-for-UB124-tx-gain-table.patch b/package/kernel/mac80211/patches/327-ath9k_hw-remove-support-for-UB124-tx-gain-table.patch
deleted file mode 100644 (file)
index a76819d..0000000
+++ /dev/null
@@ -1,22 +0,0 @@
-From: Felix Fietkau <nbd@openwrt.org>
-Date: Sat, 18 Oct 2014 13:25:26 +0200
-Subject: [PATCH] ath9k_hw: remove support for UB124 tx gain table
-
-UB124 is a USB based reference design not supported by ath9k or
-ath9k_htc.
-
-Signed-off-by: Felix Fietkau <nbd@openwrt.org>
----
-
---- a/drivers/net/wireless/ath/ath9k/ar9003_hw.c
-+++ b/drivers/net/wireless/ath/ath9k/ar9003_hw.c
-@@ -670,9 +670,6 @@ static void ar9003_tx_gain_table_mode5(s
-       if (AR_SREV_9485_11_OR_LATER(ah))
-               INIT_INI_ARRAY(&ah->iniModesTxGain,
-                       ar9485Modes_green_ob_db_tx_gain_1_1);
--      else if (AR_SREV_9340(ah))
--              INIT_INI_ARRAY(&ah->iniModesTxGain,
--                      ar9340Modes_ub124_tx_gain_table_1p0);
-       else if (AR_SREV_9580(ah))
-               INIT_INI_ARRAY(&ah->iniModesTxGain,
-                       ar9580_1p0_type5_tx_gain_table);
diff --git a/package/kernel/mac80211/patches/328-ath9k-fix-processing-RXORN-interrupts.patch b/package/kernel/mac80211/patches/328-ath9k-fix-processing-RXORN-interrupts.patch
deleted file mode 100644 (file)
index e9dbc68..0000000
+++ /dev/null
@@ -1,33 +0,0 @@
-From: Felix Fietkau <nbd@openwrt.org>
-Date: Sat, 18 Oct 2014 13:31:52 +0200
-Subject: [PATCH] ath9k: fix processing RXORN interrupts
-
-The "goto chip_reset" is a bit misleading, because it does not actually
-issue a chip reset. Instead it is bypassing processing of other
-interrupts and assumes that the tasklet will issue a chip reset.
-
-In the case of RXORN this does not happen, so bypassing processing of
-other interrupts will simply allow them to fire again. Even if RXORN
-was triggering a reset, it is not critical enough to need the bypass
-here.
-
-Signed-off-by: Felix Fietkau <nbd@openwrt.org>
----
-
---- a/drivers/net/wireless/ath/ath9k/main.c
-+++ b/drivers/net/wireless/ath/ath9k/main.c
-@@ -545,11 +545,10 @@ irqreturn_t ath_isr(int irq, void *dev)
-               sched = true;
-       /*
--       * If a FATAL or RXORN interrupt is received, we have to reset the
--       * chip immediately.
-+       * If a FATAL interrupt is received, we have to reset the chip
-+       * immediately.
-        */
--      if ((status & ATH9K_INT_FATAL) || ((status & ATH9K_INT_RXORN) &&
--          !(ah->caps.hw_caps & ATH9K_HW_CAP_EDMA)))
-+      if (status & ATH9K_INT_FATAL)
-               goto chip_reset;
-       if ((ah->config.hw_hang_checks & HW_BB_WATCHDOG) &&
diff --git a/package/kernel/mac80211/patches/329-ath9k-clean-up-debugfs-print-of-reset-causes.patch b/package/kernel/mac80211/patches/329-ath9k-clean-up-debugfs-print-of-reset-causes.patch
deleted file mode 100644 (file)
index 0f01a3a..0000000
+++ /dev/null
@@ -1,69 +0,0 @@
-From: Felix Fietkau <nbd@openwrt.org>
-Date: Sat, 18 Oct 2014 13:36:41 +0200
-Subject: [PATCH] ath9k: clean up debugfs print of reset causes
-
-Reduce code duplication
-
-Signed-off-by: Felix Fietkau <nbd@openwrt.org>
----
-
---- a/drivers/net/wireless/ath/ath9k/debug.c
-+++ b/drivers/net/wireless/ath/ath9k/debug.c
-@@ -852,36 +852,30 @@ static ssize_t read_file_reset(struct fi
-                              size_t count, loff_t *ppos)
- {
-       struct ath_softc *sc = file->private_data;
-+      static const char * const reset_cause[__RESET_TYPE_MAX] = {
-+              [RESET_TYPE_BB_HANG] = "Baseband Hang",
-+              [RESET_TYPE_BB_WATCHDOG] = "Baseband Watchdog",
-+              [RESET_TYPE_FATAL_INT] = "Fatal HW Error",
-+              [RESET_TYPE_TX_ERROR] = "TX HW error",
-+              [RESET_TYPE_TX_GTT] = "Transmit timeout",
-+              [RESET_TYPE_TX_HANG] = "TX Path Hang",
-+              [RESET_TYPE_PLL_HANG] = "PLL RX Hang",
-+              [RESET_TYPE_MAC_HANG] = "MAC Hang",
-+              [RESET_TYPE_BEACON_STUCK] = "Stuck Beacon",
-+              [RESET_TYPE_MCI] = "MCI Reset",
-+      };
-       char buf[512];
-       unsigned int len = 0;
-+      int i;
--      len += scnprintf(buf + len, sizeof(buf) - len,
--                       "%17s: %2d\n", "Baseband Hang",
--                       sc->debug.stats.reset[RESET_TYPE_BB_HANG]);
--      len += scnprintf(buf + len, sizeof(buf) - len,
--                       "%17s: %2d\n", "Baseband Watchdog",
--                       sc->debug.stats.reset[RESET_TYPE_BB_WATCHDOG]);
--      len += scnprintf(buf + len, sizeof(buf) - len,
--                       "%17s: %2d\n", "Fatal HW Error",
--                       sc->debug.stats.reset[RESET_TYPE_FATAL_INT]);
--      len += scnprintf(buf + len, sizeof(buf) - len,
--                       "%17s: %2d\n", "TX HW error",
--                       sc->debug.stats.reset[RESET_TYPE_TX_ERROR]);
--      len += scnprintf(buf + len, sizeof(buf) - len,
--                       "%17s: %2d\n", "TX Path Hang",
--                       sc->debug.stats.reset[RESET_TYPE_TX_HANG]);
--      len += scnprintf(buf + len, sizeof(buf) - len,
--                       "%17s: %2d\n", "PLL RX Hang",
--                       sc->debug.stats.reset[RESET_TYPE_PLL_HANG]);
--      len += scnprintf(buf + len, sizeof(buf) - len,
--                       "%17s: %2d\n", "MAC Hang",
--                       sc->debug.stats.reset[RESET_TYPE_MAC_HANG]);
--      len += scnprintf(buf + len, sizeof(buf) - len,
--                       "%17s: %2d\n", "Stuck Beacon",
--                       sc->debug.stats.reset[RESET_TYPE_BEACON_STUCK]);
--      len += scnprintf(buf + len, sizeof(buf) - len,
--                       "%17s: %2d\n", "MCI Reset",
--                       sc->debug.stats.reset[RESET_TYPE_MCI]);
-+      for (i = 0; i < ARRAY_SIZE(reset_cause); i++) {
-+              if (!reset_cause[i])
-+                  continue;
-+
-+              len += scnprintf(buf + len, sizeof(buf) - len,
-+                               "%17s: %2d\n", reset_cause[i],
-+                               sc->debug.stats.reset[i]);
-+      }
-       if (len > sizeof(buf))
-               len = sizeof(buf);
diff --git a/package/kernel/mac80211/patches/330-ath9k-restart-hardware-after-noise-floor-calibration.patch b/package/kernel/mac80211/patches/330-ath9k-restart-hardware-after-noise-floor-calibration.patch
deleted file mode 100644 (file)
index 6a27be7..0000000
+++ /dev/null
@@ -1,185 +0,0 @@
-From: Felix Fietkau <nbd@openwrt.org>
-Date: Sat, 18 Oct 2014 13:37:32 +0200
-Subject: [PATCH] ath9k: restart hardware after noise floor calibration
- failure
-
-When NF calibration fails, the radio often becomes deaf. The usual
-hardware hang checks do not detect this, so it's better to issue a reset
-when that happens.
-
-Signed-off-by: Felix Fietkau <nbd@openwrt.org>
----
-
---- a/drivers/net/wireless/ath/ath9k/ar9002_calib.c
-+++ b/drivers/net/wireless/ath/ath9k/ar9002_calib.c
-@@ -657,14 +657,13 @@ static void ar9002_hw_olc_temp_compensat
-               ar9280_hw_olc_temp_compensation(ah);
- }
--static bool ar9002_hw_calibrate(struct ath_hw *ah,
--                              struct ath9k_channel *chan,
--                              u8 rxchainmask,
--                              bool longcal)
-+static int ar9002_hw_calibrate(struct ath_hw *ah, struct ath9k_channel *chan,
-+                             u8 rxchainmask, bool longcal)
- {
-       bool iscaldone = true;
-       struct ath9k_cal_list *currCal = ah->cal_list_curr;
-       bool nfcal, nfcal_pending = false;
-+      int ret;
-       nfcal = !!(REG_READ(ah, AR_PHY_AGC_CONTROL) & AR_PHY_AGC_CONTROL_NF);
-       if (ah->caldata)
-@@ -698,7 +697,9 @@ static bool ar9002_hw_calibrate(struct a
-                        * NF is slow time-variant, so it is OK to use a
-                        * historical value.
-                        */
--                      ath9k_hw_loadnf(ah, ah->curchan);
-+                      ret = ath9k_hw_loadnf(ah, ah->curchan);
-+                      if (ret < 0)
-+                              return ret;
-               }
-               if (longcal) {
---- a/drivers/net/wireless/ath/ath9k/ar9003_calib.c
-+++ b/drivers/net/wireless/ath/ath9k/ar9003_calib.c
-@@ -121,13 +121,12 @@ static bool ar9003_hw_per_calibration(st
-       return iscaldone;
- }
--static bool ar9003_hw_calibrate(struct ath_hw *ah,
--                              struct ath9k_channel *chan,
--                              u8 rxchainmask,
--                              bool longcal)
-+static int ar9003_hw_calibrate(struct ath_hw *ah, struct ath9k_channel *chan,
-+                             u8 rxchainmask, bool longcal)
- {
-       bool iscaldone = true;
-       struct ath9k_cal_list *currCal = ah->cal_list_curr;
-+      int ret;
-       /*
-        * For given calibration:
-@@ -163,7 +162,9 @@ static bool ar9003_hw_calibrate(struct a
-                * NF is slow time-variant, so it is OK to use a historical
-                * value.
-                */
--              ath9k_hw_loadnf(ah, ah->curchan);
-+              ret = ath9k_hw_loadnf(ah, ah->curchan);
-+              if (ret < 0)
-+                      return ret;
-               /* start NF calibration, without updating BB NF register */
-               ath9k_hw_start_nfcal(ah, false);
---- a/drivers/net/wireless/ath/ath9k/calib.c
-+++ b/drivers/net/wireless/ath/ath9k/calib.c
-@@ -234,7 +234,7 @@ void ath9k_hw_start_nfcal(struct ath_hw 
-       REG_SET_BIT(ah, AR_PHY_AGC_CONTROL, AR_PHY_AGC_CONTROL_NF);
- }
--void ath9k_hw_loadnf(struct ath_hw *ah, struct ath9k_channel *chan)
-+int ath9k_hw_loadnf(struct ath_hw *ah, struct ath9k_channel *chan)
- {
-       struct ath9k_nfcal_hist *h = NULL;
-       unsigned i, j;
-@@ -301,7 +301,7 @@ void ath9k_hw_loadnf(struct ath_hw *ah, 
-               ath_dbg(common, ANY,
-                       "Timeout while waiting for nf to load: AR_PHY_AGC_CONTROL=0x%x\n",
-                       REG_READ(ah, AR_PHY_AGC_CONTROL));
--              return;
-+              return -ETIMEDOUT;
-       }
-       /*
-@@ -322,6 +322,8 @@ void ath9k_hw_loadnf(struct ath_hw *ah, 
-               }
-       }
-       REGWRITE_BUFFER_FLUSH(ah);
-+
-+      return 0;
- }
---- a/drivers/net/wireless/ath/ath9k/calib.h
-+++ b/drivers/net/wireless/ath/ath9k/calib.h
-@@ -109,7 +109,7 @@ struct ath9k_pacal_info{
- bool ath9k_hw_reset_calvalid(struct ath_hw *ah);
- void ath9k_hw_start_nfcal(struct ath_hw *ah, bool update);
--void ath9k_hw_loadnf(struct ath_hw *ah, struct ath9k_channel *chan);
-+int ath9k_hw_loadnf(struct ath_hw *ah, struct ath9k_channel *chan);
- bool ath9k_hw_getnf(struct ath_hw *ah, struct ath9k_channel *chan);
- void ath9k_init_nfcal_hist_buffer(struct ath_hw *ah,
-                                 struct ath9k_channel *chan);
---- a/drivers/net/wireless/ath/ath9k/debug.c
-+++ b/drivers/net/wireless/ath/ath9k/debug.c
-@@ -863,6 +863,7 @@ static ssize_t read_file_reset(struct fi
-               [RESET_TYPE_MAC_HANG] = "MAC Hang",
-               [RESET_TYPE_BEACON_STUCK] = "Stuck Beacon",
-               [RESET_TYPE_MCI] = "MCI Reset",
-+              [RESET_TYPE_CALIBRATION] = "Calibration error",
-       };
-       char buf[512];
-       unsigned int len = 0;
---- a/drivers/net/wireless/ath/ath9k/debug.h
-+++ b/drivers/net/wireless/ath/ath9k/debug.h
-@@ -49,6 +49,7 @@ enum ath_reset_type {
-       RESET_TYPE_MAC_HANG,
-       RESET_TYPE_BEACON_STUCK,
-       RESET_TYPE_MCI,
-+      RESET_TYPE_CALIBRATION,
-       __RESET_TYPE_MAX
- };
---- a/drivers/net/wireless/ath/ath9k/hw-ops.h
-+++ b/drivers/net/wireless/ath/ath9k/hw-ops.h
-@@ -41,10 +41,9 @@ static inline void ath9k_hw_set_desc_lin
-       ath9k_hw_ops(ah)->set_desc_link(ds, link);
- }
--static inline bool ath9k_hw_calibrate(struct ath_hw *ah,
--                                    struct ath9k_channel *chan,
--                                    u8 rxchainmask,
--                                    bool longcal)
-+static inline int ath9k_hw_calibrate(struct ath_hw *ah,
-+                                   struct ath9k_channel *chan,
-+                                   u8 rxchainmask, bool longcal)
- {
-       return ath9k_hw_ops(ah)->calibrate(ah, chan, rxchainmask, longcal);
- }
---- a/drivers/net/wireless/ath/ath9k/hw.h
-+++ b/drivers/net/wireless/ath/ath9k/hw.h
-@@ -688,10 +688,8 @@ struct ath_hw_ops {
-                                    bool power_off);
-       void (*rx_enable)(struct ath_hw *ah);
-       void (*set_desc_link)(void *ds, u32 link);
--      bool (*calibrate)(struct ath_hw *ah,
--                        struct ath9k_channel *chan,
--                        u8 rxchainmask,
--                        bool longcal);
-+      int (*calibrate)(struct ath_hw *ah, struct ath9k_channel *chan,
-+                       u8 rxchainmask, bool longcal);
-       bool (*get_isr)(struct ath_hw *ah, enum ath9k_int *masked,
-                       u32 *sync_cause_p);
-       void (*set_txdesc)(struct ath_hw *ah, void *ds,
---- a/drivers/net/wireless/ath/ath9k/link.c
-+++ b/drivers/net/wireless/ath/ath9k/link.c
-@@ -371,9 +371,15 @@ void ath_ani_calibrate(unsigned long dat
-       /* Perform calibration if necessary */
-       if (longcal || shortcal) {
--              common->ani.caldone =
--                      ath9k_hw_calibrate(ah, ah->curchan,
--                                         ah->rxchainmask, longcal);
-+              int ret = ath9k_hw_calibrate(ah, ah->curchan, ah->rxchainmask,
-+                                           longcal);
-+              if (ret < 0) {
-+                      common->ani.caldone = 0;
-+                      ath9k_queue_reset(sc, RESET_TYPE_CALIBRATION);
-+                      return;
-+              }
-+
-+              common->ani.caldone = ret;
-       }
-       ath_dbg(common, ANI,
diff --git a/package/kernel/mac80211/patches/331-ath9k_hw-do-not-run-NF-and-periodic-calibration-at-t.patch b/package/kernel/mac80211/patches/331-ath9k_hw-do-not-run-NF-and-periodic-calibration-at-t.patch
deleted file mode 100644 (file)
index cd3c1d7..0000000
+++ /dev/null
@@ -1,63 +0,0 @@
-From: Felix Fietkau <nbd@openwrt.org>
-Date: Sat, 18 Oct 2014 13:39:11 +0200
-Subject: [PATCH] ath9k_hw: do not run NF and periodic calibration at the
- same time
-
-It can cause inconsistent calibration results or in some cases turn the
-radio deaf.
-
-Signed-off-by: Felix Fietkau <nbd@openwrt.org>
----
-
---- a/drivers/net/wireless/ath/ath9k/ar9002_calib.c
-+++ b/drivers/net/wireless/ath/ath9k/ar9002_calib.c
-@@ -660,27 +660,26 @@ static void ar9002_hw_olc_temp_compensat
- static int ar9002_hw_calibrate(struct ath_hw *ah, struct ath9k_channel *chan,
-                              u8 rxchainmask, bool longcal)
- {
--      bool iscaldone = true;
-       struct ath9k_cal_list *currCal = ah->cal_list_curr;
--      bool nfcal, nfcal_pending = false;
-+      bool nfcal, nfcal_pending = false, percal_pending;
-       int ret;
-       nfcal = !!(REG_READ(ah, AR_PHY_AGC_CONTROL) & AR_PHY_AGC_CONTROL_NF);
-       if (ah->caldata)
-               nfcal_pending = test_bit(NFCAL_PENDING, &ah->caldata->cal_flags);
--      if (currCal && !nfcal &&
--          (currCal->calState == CAL_RUNNING ||
--           currCal->calState == CAL_WAITING)) {
--              iscaldone = ar9002_hw_per_calibration(ah, chan,
--                                                    rxchainmask, currCal);
--              if (iscaldone) {
--                      ah->cal_list_curr = currCal = currCal->calNext;
--
--                      if (currCal->calState == CAL_WAITING) {
--                              iscaldone = false;
--                              ath9k_hw_reset_calibration(ah, currCal);
--                      }
-+      percal_pending = (currCal &&
-+                        (currCal->calState == CAL_RUNNING ||
-+                         currCal->calState == CAL_WAITING));
-+
-+      if (percal_pending && !nfcal) {
-+              if (!ar9002_hw_per_calibration(ah, chan, rxchainmask, currCal))
-+                      return 0;
-+
-+              ah->cal_list_curr = currCal = currCal->calNext;
-+              if (currCal->calState == CAL_WAITING) {
-+                      ath9k_hw_reset_calibration(ah, currCal);
-+                      return 0;
-               }
-       }
-@@ -710,7 +709,7 @@ static int ar9002_hw_calibrate(struct at
-               }
-       }
--      return iscaldone;
-+      return !percal_pending;
- }
- /* Carrier leakage Calibration fix */
diff --git a/package/kernel/mac80211/patches/332-ath9k_hw-start-initial-NF-calibration-after-PA-calib.patch b/package/kernel/mac80211/patches/332-ath9k_hw-start-initial-NF-calibration-after-PA-calib.patch
deleted file mode 100644 (file)
index 32ff525..0000000
+++ /dev/null
@@ -1,36 +0,0 @@
-From: Felix Fietkau <nbd@openwrt.org>
-Date: Sat, 18 Oct 2014 13:42:03 +0200
-Subject: [PATCH] ath9k_hw: start initial NF calibration after PA
- calibration on <AR9003
-
-This makes the initial NF calibration less likely to fail.
-
-Signed-off-by: Felix Fietkau <nbd@openwrt.org>
----
-
---- a/drivers/net/wireless/ath/ath9k/ar9002_calib.c
-+++ b/drivers/net/wireless/ath/ath9k/ar9002_calib.c
-@@ -856,6 +856,8 @@ static bool ar9002_hw_init_cal(struct at
-       /* Do PA Calibration */
-       ar9002_hw_pa_cal(ah, true);
-+      ath9k_hw_loadnf(ah, chan);
-+      ath9k_hw_start_nfcal(ah, true);
-       if (ah->caldata)
-               set_bit(NFCAL_PENDING, &ah->caldata->cal_flags);
---- a/drivers/net/wireless/ath/ath9k/hw.c
-+++ b/drivers/net/wireless/ath/ath9k/hw.c
-@@ -1953,8 +1953,10 @@ int ath9k_hw_reset(struct ath_hw *ah, st
-       if (ath9k_hw_mci_is_enabled(ah))
-               ar9003_mci_check_bt(ah);
--      ath9k_hw_loadnf(ah, chan);
--      ath9k_hw_start_nfcal(ah, true);
-+      if (AR_SREV_9300_20_OR_LATER(ah)) {
-+              ath9k_hw_loadnf(ah, chan);
-+              ath9k_hw_start_nfcal(ah, true);
-+      }
-       if (AR_SREV_9300_20_OR_LATER(ah))
-               ar9003_hw_bb_watchdog_config(ah);
diff --git a/package/kernel/mac80211/patches/333-ath9k-add-support-for-endian-swap-of-eeprom-from-pla.patch b/package/kernel/mac80211/patches/333-ath9k-add-support-for-endian-swap-of-eeprom-from-pla.patch
deleted file mode 100644 (file)
index df1a710..0000000
+++ /dev/null
@@ -1,92 +0,0 @@
-From: Felix Fietkau <nbd@openwrt.org>
-Date: Sat, 18 Oct 2014 18:24:15 +0200
-Subject: [PATCH] ath9k: add support for endian swap of eeprom from
- platform data
-
-On some devices (especially little-endian ones), the flash EEPROM data
-has a different endian, which needs to be detected.
-Add a flag to the platform data to allow overriding that behavior
-
-Signed-off-by: Felix Fietkau <nbd@openwrt.org>
----
-
---- a/drivers/net/wireless/ath/ath9k/eeprom_def.c
-+++ b/drivers/net/wireless/ath/ath9k/eeprom_def.c
-@@ -262,7 +262,7 @@ static int ath9k_hw_def_check_eeprom(str
- {
-       struct ar5416_eeprom_def *eep = &ah->eeprom.def;
-       struct ath_common *common = ath9k_hw_common(ah);
--      u16 *eepdata, temp, magic, magic2;
-+      u16 *eepdata, temp, magic;
-       u32 sum = 0, el;
-       bool need_swap = false;
-       int i, addr, size;
-@@ -272,27 +272,16 @@ static int ath9k_hw_def_check_eeprom(str
-               return false;
-       }
--      if (!ath9k_hw_use_flash(ah)) {
--              ath_dbg(common, EEPROM, "Read Magic = 0x%04X\n", magic);
--
--              if (magic != AR5416_EEPROM_MAGIC) {
--                      magic2 = swab16(magic);
--
--                      if (magic2 == AR5416_EEPROM_MAGIC) {
--                              size = sizeof(struct ar5416_eeprom_def);
--                              need_swap = true;
--                              eepdata = (u16 *) (&ah->eeprom);
--
--                              for (addr = 0; addr < size / sizeof(u16); addr++) {
--                                      temp = swab16(*eepdata);
--                                      *eepdata = temp;
--                                      eepdata++;
--                              }
--                      } else {
--                              ath_err(common,
--                                      "Invalid EEPROM Magic. Endianness mismatch.\n");
--                              return -EINVAL;
--                      }
-+      if (swab16(magic) == AR5416_EEPROM_MAGIC &&
-+          !(ah->ah_flags & AH_NO_EEP_SWAP)) {
-+              size = sizeof(struct ar5416_eeprom_def);
-+              need_swap = true;
-+              eepdata = (u16 *) (&ah->eeprom);
-+
-+              for (addr = 0; addr < size / sizeof(u16); addr++) {
-+                      temp = swab16(*eepdata);
-+                      *eepdata = temp;
-+                      eepdata++;
-               }
-       }
---- a/drivers/net/wireless/ath/ath9k/hw.h
-+++ b/drivers/net/wireless/ath/ath9k/hw.h
-@@ -731,6 +731,7 @@ enum ath_cal_list {
- #define AH_USE_EEPROM   0x1
- #define AH_UNPLUGGED    0x2 /* The card has been physically removed. */
- #define AH_FASTCC       0x4
-+#define AH_NO_EEP_SWAP  0x8 /* Do not swap EEPROM data */
- struct ath_hw {
-       struct ath_ops reg_ops;
---- a/drivers/net/wireless/ath/ath9k/init.c
-+++ b/drivers/net/wireless/ath/ath9k/init.c
-@@ -531,6 +531,8 @@ static int ath9k_init_softc(u16 devid, s
-               ah->is_clk_25mhz = pdata->is_clk_25mhz;
-               ah->get_mac_revision = pdata->get_mac_revision;
-               ah->external_reset = pdata->external_reset;
-+              if (!pdata->endian_check)
-+                      ah->ah_flags |= AH_NO_EEP_SWAP;
-       }
-       common->ops = &ah->reg_ops;
---- a/include/linux/ath9k_platform.h
-+++ b/include/linux/ath9k_platform.h
-@@ -31,6 +31,7 @@ struct ath9k_platform_data {
-       u32 gpio_mask;
-       u32 gpio_val;
-+      bool endian_check;
-       bool is_clk_25mhz;
-       bool tx_gain_buffalo;
diff --git a/package/kernel/mac80211/patches/334-ath9k-allow-disabling-bands-via-platform-data.patch b/package/kernel/mac80211/patches/334-ath9k-allow-disabling-bands-via-platform-data.patch
deleted file mode 100644 (file)
index f7185b0..0000000
+++ /dev/null
@@ -1,81 +0,0 @@
-From: Felix Fietkau <nbd@openwrt.org>
-Date: Sat, 18 Oct 2014 18:27:23 +0200
-Subject: [PATCH] ath9k: allow disabling bands via platform data
-
-Some devices have multiple bands enables in the EEPROM data, even though
-they are only calibrated for one. Allow platform data to disable
-unsupported bands.
-
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
-Signed-off-by: Felix Fietkau <nbd@openwrt.org>
----
-
---- a/drivers/net/wireless/ath/ath9k/hw.c
-+++ b/drivers/net/wireless/ath/ath9k/hw.c
-@@ -2344,17 +2344,25 @@ int ath9k_hw_fill_cap_info(struct ath_hw
-       }
-       eeval = ah->eep_ops->get_eeprom(ah, EEP_OP_MODE);
--      if ((eeval & (AR5416_OPFLAGS_11G | AR5416_OPFLAGS_11A)) == 0) {
--              ath_err(common,
--                      "no band has been marked as supported in EEPROM\n");
--              return -EINVAL;
-+
-+      if (eeval & AR5416_OPFLAGS_11A) {
-+              if (ah->disable_5ghz)
-+                      ath_warn(common, "disabling 5GHz band\n");
-+              else
-+                      pCap->hw_caps |= ATH9K_HW_CAP_5GHZ;
-       }
--      if (eeval & AR5416_OPFLAGS_11A)
--              pCap->hw_caps |= ATH9K_HW_CAP_5GHZ;
-+      if (eeval & AR5416_OPFLAGS_11G) {
-+              if (ah->disable_2ghz)
-+                      ath_warn(common, "disabling 2GHz band\n");
-+              else
-+                      pCap->hw_caps |= ATH9K_HW_CAP_2GHZ;
-+      }
--      if (eeval & AR5416_OPFLAGS_11G)
--              pCap->hw_caps |= ATH9K_HW_CAP_2GHZ;
-+      if ((pCap->hw_caps & (ATH9K_HW_CAP_2GHZ | ATH9K_HW_CAP_5GHZ)) == 0) {
-+              ath_err(common, "both bands are disabled\n");
-+              return -EINVAL;
-+      }
-       if (AR_SREV_9485(ah) ||
-           AR_SREV_9285(ah) ||
---- a/drivers/net/wireless/ath/ath9k/hw.h
-+++ b/drivers/net/wireless/ath/ath9k/hw.h
-@@ -930,6 +930,8 @@ struct ath_hw {
-       bool is_clk_25mhz;
-       int (*get_mac_revision)(void);
-       int (*external_reset)(void);
-+      bool disable_2ghz;
-+      bool disable_5ghz;
-       const struct firmware *eeprom_blob;
---- a/drivers/net/wireless/ath/ath9k/init.c
-+++ b/drivers/net/wireless/ath/ath9k/init.c
-@@ -531,6 +531,8 @@ static int ath9k_init_softc(u16 devid, s
-               ah->is_clk_25mhz = pdata->is_clk_25mhz;
-               ah->get_mac_revision = pdata->get_mac_revision;
-               ah->external_reset = pdata->external_reset;
-+              ah->disable_2ghz = pdata->disable_2ghz;
-+              ah->disable_5ghz = pdata->disable_5ghz;
-               if (!pdata->endian_check)
-                       ah->ah_flags |= AH_NO_EEP_SWAP;
-       }
---- a/include/linux/ath9k_platform.h
-+++ b/include/linux/ath9k_platform.h
-@@ -34,6 +34,8 @@ struct ath9k_platform_data {
-       bool endian_check;
-       bool is_clk_25mhz;
-       bool tx_gain_buffalo;
-+      bool disable_2ghz;
-+      bool disable_5ghz;
-       int (*get_mac_revision)(void);
-       int (*external_reset)(void);
diff --git a/package/kernel/mac80211/patches/335-ath9k-use-a-random-MAC-address-if-the-EEPROM-address.patch b/package/kernel/mac80211/patches/335-ath9k-use-a-random-MAC-address-if-the-EEPROM-address.patch
deleted file mode 100644 (file)
index ce6c081..0000000
+++ /dev/null
@@ -1,39 +0,0 @@
-From: Felix Fietkau <nbd@openwrt.org>
-Date: Sat, 18 Oct 2014 18:31:49 +0200
-Subject: [PATCH] ath9k: use a random MAC address if the EEPROM address
- is invalid
-
-Based on OpenWrt patch by Gabor Juhos
-
-Signed-off-by: Felix Fietkau <nbd@openwrt.org>
----
-
---- a/drivers/net/wireless/ath/ath9k/hw.c
-+++ b/drivers/net/wireless/ath/ath9k/hw.c
-@@ -19,6 +19,7 @@
- #include <linux/module.h>
- #include <linux/time.h>
- #include <linux/bitops.h>
-+#include <linux/etherdevice.h>
- #include <asm/unaligned.h>
- #include "hw.h"
-@@ -446,8 +447,16 @@ static int ath9k_hw_init_macaddr(struct 
-               common->macaddr[2 * i] = eeval >> 8;
-               common->macaddr[2 * i + 1] = eeval & 0xff;
-       }
--      if (sum == 0 || sum == 0xffff * 3)
--              return -EADDRNOTAVAIL;
-+      if (!is_valid_ether_addr(common->macaddr)) {
-+              ath_err(common,
-+                      "eeprom contains invalid mac address: %pM\n",
-+                      common->macaddr);
-+
-+              random_ether_addr(common->macaddr);
-+              ath_err(common,
-+                      "random mac address will be used: %pM\n",
-+                      common->macaddr);
-+      }
-       return 0;
- }
diff --git a/package/kernel/mac80211/patches/336-ath9k-Enable-HW-queue-control-only-for-MCC.patch b/package/kernel/mac80211/patches/336-ath9k-Enable-HW-queue-control-only-for-MCC.patch
deleted file mode 100644 (file)
index e721f36..0000000
+++ /dev/null
@@ -1,145 +0,0 @@
-From: Sujith Manoharan <c_manoha@qca.qualcomm.com>
-Date: Tue, 21 Oct 2014 19:23:02 +0530
-Subject: [PATCH] ath9k: Enable HW queue control only for MCC
-
-Enabling HW queue control for normal (non-mcc) mode
-causes problems with queue management, resulting
-in traffic stall. Since it is mainly required for
-fairness in MCC mode, disable it for the general case.
-
-Bug: https://dev.openwrt.org/ticket/18164
-
-Cc: Felix Fietkau <nbd@openwrt.org>
-Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
----
-
---- a/drivers/net/wireless/ath/ath9k/init.c
-+++ b/drivers/net/wireless/ath/ath9k/init.c
-@@ -741,6 +741,32 @@ static const struct ieee80211_iface_comb
- #endif
- };
-+#ifdef CPTCFG_ATH9K_CHANNEL_CONTEXT
-+static void ath9k_set_mcc_capab(struct ath_softc *sc, struct ieee80211_hw *hw)
-+{
-+      struct ath_hw *ah = sc->sc_ah;
-+      struct ath_common *common = ath9k_hw_common(ah);
-+
-+      if (!ath9k_is_chanctx_enabled())
-+              return;
-+
-+      hw->flags |= IEEE80211_HW_QUEUE_CONTROL;
-+      hw->queues = ATH9K_NUM_TX_QUEUES;
-+      hw->offchannel_tx_hw_queue = hw->queues - 1;
-+      hw->wiphy->interface_modes &= ~ BIT(NL80211_IFTYPE_WDS);
-+      hw->wiphy->iface_combinations = if_comb_multi;
-+      hw->wiphy->n_iface_combinations = ARRAY_SIZE(if_comb_multi);
-+      hw->wiphy->max_scan_ssids = 255;
-+      hw->wiphy->max_scan_ie_len = IEEE80211_MAX_DATA_LEN;
-+      hw->wiphy->max_remain_on_channel_duration = 10000;
-+      hw->chanctx_data_size = sizeof(void *);
-+      hw->extra_beacon_tailroom =
-+              sizeof(struct ieee80211_p2p_noa_attr) + 9;
-+
-+      ath_dbg(common, CHAN_CTX, "Use channel contexts\n");
-+}
-+#endif /* CPTCFG_ATH9K_CHANNEL_CONTEXT */
-+
- static void ath9k_set_hw_capab(struct ath_softc *sc, struct ieee80211_hw *hw)
- {
-       struct ath_hw *ah = sc->sc_ah;
-@@ -753,7 +779,6 @@ static void ath9k_set_hw_capab(struct at
-               IEEE80211_HW_SPECTRUM_MGMT |
-               IEEE80211_HW_REPORTS_TX_ACK_STATUS |
-               IEEE80211_HW_SUPPORTS_RC_TABLE |
--              IEEE80211_HW_QUEUE_CONTROL |
-               IEEE80211_HW_SUPPORTS_HT_CCK_RATES;
-       if (ath9k_ps_enable)
-@@ -788,24 +813,6 @@ static void ath9k_set_hw_capab(struct at
-                       hw->wiphy->n_iface_combinations = ARRAY_SIZE(if_comb);
-       }
--#ifdef CPTCFG_ATH9K_CHANNEL_CONTEXT
--
--      if (ath9k_is_chanctx_enabled()) {
--              hw->wiphy->interface_modes &= ~ BIT(NL80211_IFTYPE_WDS);
--              hw->wiphy->iface_combinations = if_comb_multi;
--              hw->wiphy->n_iface_combinations = ARRAY_SIZE(if_comb_multi);
--              hw->wiphy->max_scan_ssids = 255;
--              hw->wiphy->max_scan_ie_len = IEEE80211_MAX_DATA_LEN;
--              hw->wiphy->max_remain_on_channel_duration = 10000;
--              hw->chanctx_data_size = sizeof(void *);
--              hw->extra_beacon_tailroom =
--                      sizeof(struct ieee80211_p2p_noa_attr) + 9;
--
--              ath_dbg(common, CHAN_CTX, "Use channel contexts\n");
--      }
--
--#endif /* CPTCFG_ATH9K_CHANNEL_CONTEXT */
--
-       hw->wiphy->flags &= ~WIPHY_FLAG_PS_ON_BY_DEFAULT;
-       hw->wiphy->flags |= WIPHY_FLAG_IBSS_RSN;
-@@ -815,12 +822,7 @@ static void ath9k_set_hw_capab(struct at
-       hw->wiphy->flags |= WIPHY_FLAG_HAS_CHANNEL_SWITCH;
-       hw->wiphy->flags |= WIPHY_FLAG_AP_UAPSD;
--      /* allow 4 queues per channel context +
--       * 1 cab queue + 1 offchannel tx queue
--       */
--      hw->queues = ATH9K_NUM_TX_QUEUES;
--      /* last queue for offchannel */
--      hw->offchannel_tx_hw_queue = hw->queues - 1;
-+      hw->queues = 4;
-       hw->max_rates = 4;
-       hw->max_listen_interval = 10;
-       hw->max_rate_tries = 10;
-@@ -844,6 +846,9 @@ static void ath9k_set_hw_capab(struct at
-               hw->wiphy->bands[IEEE80211_BAND_5GHZ] =
-                       &common->sbands[IEEE80211_BAND_5GHZ];
-+#ifdef CPTCFG_ATH9K_CHANNEL_CONTEXT
-+      ath9k_set_mcc_capab(sc, hw);
-+#endif
-       ath9k_init_wow(hw);
-       ath9k_cmn_reload_chainmask(ah);
---- a/drivers/net/wireless/ath/ath9k/main.c
-+++ b/drivers/net/wireless/ath/ath9k/main.c
-@@ -1181,6 +1181,9 @@ static void ath9k_assign_hw_queues(struc
- {
-       int i;
-+      if (!ath9k_is_chanctx_enabled())
-+              return;
-+
-       for (i = 0; i < IEEE80211_NUM_ACS; i++)
-               vif->hw_queue[i] = i;
---- a/drivers/net/wireless/ath/ath9k/xmit.c
-+++ b/drivers/net/wireless/ath/ath9k/xmit.c
-@@ -169,7 +169,10 @@ static void ath_txq_skb_done(struct ath_
-       if (txq->stopped &&
-           txq->pending_frames < sc->tx.txq_max_pending[q]) {
--              ieee80211_wake_queue(sc->hw, info->hw_queue);
-+              if (ath9k_is_chanctx_enabled())
-+                      ieee80211_wake_queue(sc->hw, info->hw_queue);
-+              else
-+                      ieee80211_wake_queue(sc->hw, q);
-               txq->stopped = false;
-       }
- }
-@@ -2247,7 +2250,10 @@ int ath_tx_start(struct ieee80211_hw *hw
-               fi->txq = q;
-               if (++txq->pending_frames > sc->tx.txq_max_pending[q] &&
-                   !txq->stopped) {
--                      ieee80211_stop_queue(sc->hw, info->hw_queue);
-+                      if (ath9k_is_chanctx_enabled())
-+                              ieee80211_stop_queue(sc->hw, info->hw_queue);
-+                      else
-+                              ieee80211_stop_queue(sc->hw, q);
-                       txq->stopped = true;
-               }
-       }
diff --git a/package/kernel/mac80211/patches/337-ath-use-CTL-region-from-cfg80211-if-unset-in-EEPROM.patch b/package/kernel/mac80211/patches/337-ath-use-CTL-region-from-cfg80211-if-unset-in-EEPROM.patch
deleted file mode 100644 (file)
index f451912..0000000
+++ /dev/null
@@ -1,56 +0,0 @@
-From: Felix Fietkau <nbd@openwrt.org>
-Date: Wed, 22 Oct 2014 15:21:22 +0200
-Subject: [PATCH] ath: use CTL region from cfg80211 if unset in EEPROM
-
-Many AP devices do not have the proper regulatory domain programmed in
-EEPROM. Instead they expect the software to set the appropriate region.
-For these devices, the country code defaults to US, and the driver uses
-the US CTL tables as well.
-On devices bought in Europe this can lead to tx power being set too high
-on the band edges, even if the cfg80211 regdomain is set correctly.
-Fix this issue by taking into account the DFS region, but only when the
-EEPROM regdomain is set to default.
-
-Signed-off-by: Felix Fietkau <nbd@openwrt.org>
----
-
---- a/drivers/net/wireless/ath/ath.h
-+++ b/drivers/net/wireless/ath/ath.h
-@@ -80,6 +80,7 @@ struct reg_dmn_pair_mapping {
- struct ath_regulatory {
-       char alpha2[2];
-+      enum nl80211_dfs_regions region;
-       u16 country_code;
-       u16 max_power_level;
-       u16 current_rd;
---- a/drivers/net/wireless/ath/regd.c
-+++ b/drivers/net/wireless/ath/regd.c
-@@ -515,6 +515,7 @@ void ath_reg_notifier_apply(struct wiphy
-       if (!request)
-               return;
-+      reg->region = request->dfs_region;
-       switch (request->initiator) {
-       case NL80211_REGDOM_SET_BY_CORE:
-               /*
-@@ -779,6 +780,19 @@ u32 ath_regd_get_band_ctl(struct ath_reg
-               return SD_NO_CTL;
-       }
-+      if (ath_regd_get_eepromRD(reg) == CTRY_DEFAULT) {
-+              switch (reg->region) {
-+              case NL80211_DFS_FCC:
-+                      return CTL_FCC;
-+              case NL80211_DFS_ETSI:
-+                      return CTL_ETSI;
-+              case NL80211_DFS_JP:
-+                      return CTL_MKK;
-+              default:
-+                      break;
-+              }
-+      }
-+
-       switch (band) {
-       case IEEE80211_BAND_2GHZ:
-               return reg->regpair->reg_2ghz_ctl;
diff --git a/package/kernel/mac80211/patches/338-ath9k-Update-AR9580-initvals.patch b/package/kernel/mac80211/patches/338-ath9k-Update-AR9580-initvals.patch
deleted file mode 100644 (file)
index af69b06..0000000
+++ /dev/null
@@ -1,162 +0,0 @@
-From: Sujith Manoharan <c_manoha@qca.qualcomm.com>
-Date: Wed, 22 Oct 2014 12:21:44 +0530
-Subject: [PATCH] ath9k: Update AR9580 initvals
-
-This fixes RX sensitivity issues with AR9580.
-
-Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
----
-
---- a/drivers/net/wireless/ath/ath9k/ar9580_1p0_initvals.h
-+++ b/drivers/net/wireless/ath/ath9k/ar9580_1p0_initvals.h
-@@ -24,7 +24,149 @@
- #define ar9580_1p0_soc_postamble ar9300_2p2_soc_postamble
--#define ar9580_1p0_radio_core ar9300_2p2_radio_core
-+static const u32 ar9580_1p0_radio_core[][2] = {
-+      /* Addr      allmodes  */
-+      {0x00016000, 0x36db2db6},
-+      {0x00016004, 0x6db6db40},
-+      {0x00016008, 0x73f00000},
-+      {0x0001600c, 0x00000000},
-+      {0x00016040, 0x7f80fff8},
-+      {0x0001604c, 0x76d005b5},
-+      {0x00016050, 0x556cf031},
-+      {0x00016054, 0x13449440},
-+      {0x00016058, 0x0c51c92c},
-+      {0x0001605c, 0x3db7fffc},
-+      {0x00016060, 0xfffffffc},
-+      {0x00016064, 0x000f0278},
-+      {0x0001606c, 0x6db60000},
-+      {0x00016080, 0x00000000},
-+      {0x00016084, 0x0e48048c},
-+      {0x00016088, 0x54214514},
-+      {0x0001608c, 0x119f481e},
-+      {0x00016090, 0x24926490},
-+      {0x00016098, 0xd2888888},
-+      {0x000160a0, 0x0a108ffe},
-+      {0x000160a4, 0x812fc370},
-+      {0x000160a8, 0x423c8000},
-+      {0x000160b4, 0x92480080},
-+      {0x000160c0, 0x00adb6d0},
-+      {0x000160c4, 0x6db6db60},
-+      {0x000160c8, 0x6db6db6c},
-+      {0x000160cc, 0x01e6c000},
-+      {0x00016100, 0x3fffbe01},
-+      {0x00016104, 0xfff80000},
-+      {0x00016108, 0x00080010},
-+      {0x00016144, 0x02084080},
-+      {0x00016148, 0x00000000},
-+      {0x00016280, 0x058a0001},
-+      {0x00016284, 0x3d840208},
-+      {0x00016288, 0x05a20408},
-+      {0x0001628c, 0x00038c07},
-+      {0x00016290, 0x00000004},
-+      {0x00016294, 0x458a214f},
-+      {0x00016380, 0x00000000},
-+      {0x00016384, 0x00000000},
-+      {0x00016388, 0x00800700},
-+      {0x0001638c, 0x00800700},
-+      {0x00016390, 0x00800700},
-+      {0x00016394, 0x00000000},
-+      {0x00016398, 0x00000000},
-+      {0x0001639c, 0x00000000},
-+      {0x000163a0, 0x00000001},
-+      {0x000163a4, 0x00000001},
-+      {0x000163a8, 0x00000000},
-+      {0x000163ac, 0x00000000},
-+      {0x000163b0, 0x00000000},
-+      {0x000163b4, 0x00000000},
-+      {0x000163b8, 0x00000000},
-+      {0x000163bc, 0x00000000},
-+      {0x000163c0, 0x000000a0},
-+      {0x000163c4, 0x000c0000},
-+      {0x000163c8, 0x14021402},
-+      {0x000163cc, 0x00001402},
-+      {0x000163d0, 0x00000000},
-+      {0x000163d4, 0x00000000},
-+      {0x00016400, 0x36db2db6},
-+      {0x00016404, 0x6db6db40},
-+      {0x00016408, 0x73f00000},
-+      {0x0001640c, 0x00000000},
-+      {0x00016440, 0x7f80fff8},
-+      {0x0001644c, 0x76d005b5},
-+      {0x00016450, 0x556cf031},
-+      {0x00016454, 0x13449440},
-+      {0x00016458, 0x0c51c92c},
-+      {0x0001645c, 0x3db7fffc},
-+      {0x00016460, 0xfffffffc},
-+      {0x00016464, 0x000f0278},
-+      {0x0001646c, 0x6db60000},
-+      {0x00016500, 0x3fffbe01},
-+      {0x00016504, 0xfff80000},
-+      {0x00016508, 0x00080010},
-+      {0x00016544, 0x02084080},
-+      {0x00016548, 0x00000000},
-+      {0x00016780, 0x00000000},
-+      {0x00016784, 0x00000000},
-+      {0x00016788, 0x00800700},
-+      {0x0001678c, 0x00800700},
-+      {0x00016790, 0x00800700},
-+      {0x00016794, 0x00000000},
-+      {0x00016798, 0x00000000},
-+      {0x0001679c, 0x00000000},
-+      {0x000167a0, 0x00000001},
-+      {0x000167a4, 0x00000001},
-+      {0x000167a8, 0x00000000},
-+      {0x000167ac, 0x00000000},
-+      {0x000167b0, 0x00000000},
-+      {0x000167b4, 0x00000000},
-+      {0x000167b8, 0x00000000},
-+      {0x000167bc, 0x00000000},
-+      {0x000167c0, 0x000000a0},
-+      {0x000167c4, 0x000c0000},
-+      {0x000167c8, 0x14021402},
-+      {0x000167cc, 0x00001402},
-+      {0x000167d0, 0x00000000},
-+      {0x000167d4, 0x00000000},
-+      {0x00016800, 0x36db2db6},
-+      {0x00016804, 0x6db6db40},
-+      {0x00016808, 0x73f00000},
-+      {0x0001680c, 0x00000000},
-+      {0x00016840, 0x7f80fff8},
-+      {0x0001684c, 0x76d005b5},
-+      {0x00016850, 0x556cf031},
-+      {0x00016854, 0x13449440},
-+      {0x00016858, 0x0c51c92c},
-+      {0x0001685c, 0x3db7fffc},
-+      {0x00016860, 0xfffffffc},
-+      {0x00016864, 0x000f0278},
-+      {0x0001686c, 0x6db60000},
-+      {0x00016900, 0x3fffbe01},
-+      {0x00016904, 0xfff80000},
-+      {0x00016908, 0x00080010},
-+      {0x00016944, 0x02084080},
-+      {0x00016948, 0x00000000},
-+      {0x00016b80, 0x00000000},
-+      {0x00016b84, 0x00000000},
-+      {0x00016b88, 0x00800700},
-+      {0x00016b8c, 0x00800700},
-+      {0x00016b90, 0x00800700},
-+      {0x00016b94, 0x00000000},
-+      {0x00016b98, 0x00000000},
-+      {0x00016b9c, 0x00000000},
-+      {0x00016ba0, 0x00000001},
-+      {0x00016ba4, 0x00000001},
-+      {0x00016ba8, 0x00000000},
-+      {0x00016bac, 0x00000000},
-+      {0x00016bb0, 0x00000000},
-+      {0x00016bb4, 0x00000000},
-+      {0x00016bb8, 0x00000000},
-+      {0x00016bbc, 0x00000000},
-+      {0x00016bc0, 0x000000a0},
-+      {0x00016bc4, 0x000c0000},
-+      {0x00016bc8, 0x14021402},
-+      {0x00016bcc, 0x00001402},
-+      {0x00016bd0, 0x00000000},
-+      {0x00016bd4, 0x00000000},
-+};
- #define ar9580_1p0_mac_postamble ar9300_2p2_mac_postamble
diff --git a/package/kernel/mac80211/patches/339-ath9k-Update-AR955x-initvals.patch b/package/kernel/mac80211/patches/339-ath9k-Update-AR955x-initvals.patch
deleted file mode 100644 (file)
index 04dca91..0000000
+++ /dev/null
@@ -1,37 +0,0 @@
-From: Sujith Manoharan <c_manoha@qca.qualcomm.com>
-Date: Wed, 22 Oct 2014 12:21:45 +0530
-Subject: [PATCH] ath9k: Update AR955x initvals
-
-* Fix a 11b/EVM issue by adjusting
-  FIR filter coefficients.
-
-* Fix a problem with receiving probe request
-  frames sent at 11b rate.
-
-Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
----
-
---- a/drivers/net/wireless/ath/ath9k/ar955x_1p0_initvals.h
-+++ b/drivers/net/wireless/ath/ath9k/ar955x_1p0_initvals.h
-@@ -507,7 +507,7 @@ static const u32 ar955x_1p0_baseband_cor
-       {0x00009d04, 0x40206c10},
-       {0x00009d08, 0x009c4060},
-       {0x00009d0c, 0x9883800a},
--      {0x00009d10, 0x01834061},
-+      {0x00009d10, 0x01884061},
-       {0x00009d14, 0x00c0040b},
-       {0x00009d18, 0x00000000},
-       {0x00009e08, 0x0038230c},
-@@ -545,9 +545,9 @@ static const u32 ar955x_1p0_baseband_cor
-       {0x0000a370, 0x00000000},
-       {0x0000a390, 0x00000001},
-       {0x0000a394, 0x00000444},
--      {0x0000a398, 0x1f020503},
--      {0x0000a39c, 0x29180c03},
--      {0x0000a3a0, 0x9a8b6844},
-+      {0x0000a398, 0x001f0e0f},
-+      {0x0000a39c, 0x0075393f},
-+      {0x0000a3a0, 0xb79f6427},
-       {0x0000a3a4, 0x00000000},
-       {0x0000a3a8, 0xaaaaaaaa},
-       {0x0000a3ac, 0x3c466478},
diff --git a/package/kernel/mac80211/patches/340-mac80211-add-support-for-driver-tx-power-reporting.patch b/package/kernel/mac80211/patches/340-mac80211-add-support-for-driver-tx-power-reporting.patch
deleted file mode 100644 (file)
index 6998584..0000000
+++ /dev/null
@@ -1,43 +0,0 @@
-From: Felix Fietkau <nbd@openwrt.org>
-Date: Wed, 22 Oct 2014 17:55:50 +0200
-Subject: [PATCH] mac80211: add support for driver tx power reporting
-
-The configured tx power is often limited by hardware capabilities,
-channel settings, antenna configuration, etc.
-
-Signed-off-by: Felix Fietkau <nbd@openwrt.org>
----
-
---- a/include/net/mac80211.h
-+++ b/include/net/mac80211.h
-@@ -2838,6 +2838,9 @@ enum ieee80211_roc_type {
-  * @get_expected_throughput: extract the expected throughput towards the
-  *    specified station. The returned value is expressed in Kbps. It returns 0
-  *    if the RC algorithm does not have proper data to provide.
-+ *
-+ * @get_txpower: get current maximum tx power (in dBm) based on configuration
-+ *    and hardware limits.
-  */
- struct ieee80211_ops {
-       void (*tx)(struct ieee80211_hw *hw,
-@@ -3039,6 +3042,8 @@ struct ieee80211_ops {
-       int (*join_ibss)(struct ieee80211_hw *hw, struct ieee80211_vif *vif);
-       void (*leave_ibss)(struct ieee80211_hw *hw, struct ieee80211_vif *vif);
-       u32 (*get_expected_throughput)(struct ieee80211_sta *sta);
-+      int (*get_txpower)(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
-+                         int *dbm);
- };
- /**
---- a/net/mac80211/cfg.c
-+++ b/net/mac80211/cfg.c
-@@ -2081,6 +2081,9 @@ static int ieee80211_get_tx_power(struct
-       struct ieee80211_local *local = wiphy_priv(wiphy);
-       struct ieee80211_sub_if_data *sdata = IEEE80211_WDEV_TO_SUB_IF(wdev);
-+      if (local->ops->get_txpower)
-+              return local->ops->get_txpower(&local->hw, &sdata->vif, dbm);
-+
-       if (!local->use_chanctx)
-               *dbm = local->hw.conf.power_level;
-       else
diff --git a/package/kernel/mac80211/patches/341-ath9k_common-always-update-value-in-ath9k_cmn_update.patch b/package/kernel/mac80211/patches/341-ath9k_common-always-update-value-in-ath9k_cmn_update.patch
deleted file mode 100644 (file)
index 625bd42..0000000
+++ /dev/null
@@ -1,31 +0,0 @@
-From: Felix Fietkau <nbd@openwrt.org>
-Date: Wed, 22 Oct 2014 18:16:14 +0200
-Subject: [PATCH] ath9k_common: always update value in
- ath9k_cmn_update_txpow
-
-In some cases the limit may be the same as reg->power_limit, but the
-actual value that the hardware uses is not up to date. In that case, a
-wrong value for current tx power is tracked internally.
-Fix this by unconditionally updating it.
-
-Signed-off-by: Felix Fietkau <nbd@openwrt.org>
----
-
---- a/drivers/net/wireless/ath/ath9k/common.c
-+++ b/drivers/net/wireless/ath/ath9k/common.c
-@@ -368,11 +368,11 @@ void ath9k_cmn_update_txpow(struct ath_h
- {
-       struct ath_regulatory *reg = ath9k_hw_regulatory(ah);
--      if (reg->power_limit != new_txpow) {
-+      if (reg->power_limit != new_txpow)
-               ath9k_hw_set_txpowerlimit(ah, new_txpow, false);
--              /* read back in case value is clamped */
--              *txpower = reg->max_power_level;
--      }
-+
-+      /* read back in case value is clamped */
-+      *txpower = reg->max_power_level;
- }
- EXPORT_SYMBOL(ath9k_cmn_update_txpow);
diff --git a/package/kernel/mac80211/patches/342-ath9k-add-support-for-reporting-tx-power-to-mac80211.patch b/package/kernel/mac80211/patches/342-ath9k-add-support-for-reporting-tx-power-to-mac80211.patch
deleted file mode 100644 (file)
index 8bb41bd..0000000
+++ /dev/null
@@ -1,118 +0,0 @@
-From: Felix Fietkau <nbd@openwrt.org>
-Date: Wed, 22 Oct 2014 18:18:04 +0200
-Subject: [PATCH] ath9k: add support for reporting tx power to mac80211
-
-Track it per channel context instead of in the softc
-
-Signed-off-by: Felix Fietkau <nbd@openwrt.org>
----
-
---- a/drivers/net/wireless/ath/ath9k/ath9k.h
-+++ b/drivers/net/wireless/ath/ath9k/ath9k.h
-@@ -347,6 +347,7 @@ struct ath_chanctx {
-       int flush_timeout;
-       u16 txpower;
-+      u16 cur_txpower;
-       bool offchannel;
-       bool stopped;
-       bool active;
-@@ -987,7 +988,6 @@ struct ath_softc {
-       u8 gtt_cnt;
-       u32 intrstatus;
-       u16 ps_flags; /* PS_* */
--      u16 curtxpow;
-       bool ps_enabled;
-       bool ps_idle;
-       short nbcnvifs;
---- a/drivers/net/wireless/ath/ath9k/init.c
-+++ b/drivers/net/wireless/ath/ath9k/init.c
-@@ -172,17 +172,20 @@ static void ath9k_reg_notifier(struct wi
-       ath_reg_notifier_apply(wiphy, request, reg);
-       /* Set tx power */
--      if (ah->curchan) {
--              sc->cur_chan->txpower = 2 * ah->curchan->chan->max_power;
--              ath9k_ps_wakeup(sc);
--              ath9k_hw_set_txpowerlimit(ah, sc->cur_chan->txpower, false);
--              sc->curtxpow = ath9k_hw_regulatory(ah)->power_limit;
--              /* synchronize DFS detector if regulatory domain changed */
--              if (sc->dfs_detector != NULL)
--                      sc->dfs_detector->set_dfs_domain(sc->dfs_detector,
--                                                       request->dfs_region);
--              ath9k_ps_restore(sc);
--      }
-+      if (!ah->curchan)
-+              return;
-+
-+      sc->cur_chan->txpower = 2 * ah->curchan->chan->max_power;
-+      ath9k_ps_wakeup(sc);
-+      ath9k_hw_set_txpowerlimit(ah, sc->cur_chan->txpower, false);
-+      ath9k_cmn_update_txpow(ah, sc->cur_chan->cur_txpower,
-+                             sc->cur_chan->txpower,
-+                             &sc->cur_chan->cur_txpower);
-+      /* synchronize DFS detector if regulatory domain changed */
-+      if (sc->dfs_detector != NULL)
-+              sc->dfs_detector->set_dfs_domain(sc->dfs_detector,
-+                                               request->dfs_region);
-+      ath9k_ps_restore(sc);
- }
- /*
---- a/drivers/net/wireless/ath/ath9k/main.c
-+++ b/drivers/net/wireless/ath/ath9k/main.c
-@@ -233,8 +233,9 @@ static bool ath_complete_reset(struct at
-       ath9k_calculate_summary_state(sc, sc->cur_chan);
-       ath_startrecv(sc);
--      ath9k_cmn_update_txpow(ah, sc->curtxpow,
--                             sc->cur_chan->txpower, &sc->curtxpow);
-+      ath9k_cmn_update_txpow(ah, sc->cur_chan->cur_txpower,
-+                             sc->cur_chan->txpower,
-+                             &sc->cur_chan->cur_txpower);
-       clear_bit(ATH_OP_HW_RESET, &common->op_flags);
-       if (!sc->cur_chan->offchannel && start) {
-@@ -1471,8 +1472,9 @@ static int ath9k_config(struct ieee80211
-       if (changed & IEEE80211_CONF_CHANGE_POWER) {
-               ath_dbg(common, CONFIG, "Set power: %d\n", conf->power_level);
-               sc->cur_chan->txpower = 2 * conf->power_level;
--              ath9k_cmn_update_txpow(ah, sc->curtxpow,
--                                     sc->cur_chan->txpower, &sc->curtxpow);
-+              ath9k_cmn_update_txpow(ah, sc->cur_chan->cur_txpower,
-+                                     sc->cur_chan->txpower,
-+                                     &sc->cur_chan->cur_txpower);
-       }
-       mutex_unlock(&sc->mutex);
-@@ -2594,6 +2596,24 @@ void ath9k_fill_chanctx_ops(void)
- #endif
-+static int ath9k_get_txpower(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
-+                           int *dbm)
-+{
-+      struct ath_softc *sc = hw->priv;
-+      struct ath_vif *avp = (void *)vif->drv_priv;
-+
-+      mutex_lock(&sc->mutex);
-+      if (avp->chanctx)
-+              *dbm = avp->chanctx->cur_txpower;
-+      else
-+              *dbm = sc->cur_chan->cur_txpower;
-+      mutex_unlock(&sc->mutex);
-+
-+      *dbm /= 2;
-+
-+      return 0;
-+}
-+
- struct ieee80211_ops ath9k_ops = {
-       .tx                 = ath9k_tx,
-       .start              = ath9k_start,
-@@ -2640,4 +2660,5 @@ struct ieee80211_ops ath9k_ops = {
- #endif
-       .sw_scan_start      = ath9k_sw_scan_start,
-       .sw_scan_complete   = ath9k_sw_scan_complete,
-+      .get_txpower        = ath9k_get_txpower,
- };
diff --git a/package/kernel/mac80211/patches/343-ath10k-add-SURVEY_INFO_IN_USE-for-current-channel-on.patch b/package/kernel/mac80211/patches/343-ath10k-add-SURVEY_INFO_IN_USE-for-current-channel-on.patch
deleted file mode 100644 (file)
index a9cba1d..0000000
+++ /dev/null
@@ -1,19 +0,0 @@
-From: Felix Fietkau <nbd@openwrt.org>
-Date: Wed, 22 Oct 2014 18:44:03 +0200
-Subject: [PATCH] ath10k: add SURVEY_INFO_IN_USE for current channel on survey
-
-Signed-off-by: Felix Fietkau <nbd@openwrt.org>
----
-
---- a/drivers/net/wireless/ath/ath10k/mac.c
-+++ b/drivers/net/wireless/ath/ath10k/mac.c
-@@ -3975,6 +3975,9 @@ static int ath10k_get_survey(struct ieee
-       survey->channel = &sband->channels[idx];
-+      if (ar->rx_channel == survey->channel)
-+              survey->filled |= SURVEY_INFO_IN_USE;
-+
- exit:
-       mutex_unlock(&ar->conf_mutex);
-       return ret;
diff --git a/package/kernel/mac80211/patches/344-rtl8192cu-Fix-for-rtlwifi-s-bluetooth-coexist-functi.patch b/package/kernel/mac80211/patches/344-rtl8192cu-Fix-for-rtlwifi-s-bluetooth-coexist-functi.patch
deleted file mode 100644 (file)
index 666caea..0000000
+++ /dev/null
@@ -1,34 +0,0 @@
-From: Karsten Wiese <fzuuzf@googlemail.com>
-Date: Wed, 22 Oct 2014 15:47:32 +0200
-Subject: [PATCH] rtl8192cu: Fix for rtlwifi's bluetooth coexist
- functionality
-
-Initialize function pointer with a function indicating bt coexist is not there.
-Prevents Ooops.
-
-Signed-off-by: Karsten Wiese <fzuuzf@googlemail.com>
----
-
---- a/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c
-+++ b/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c
-@@ -101,6 +101,12 @@ static void rtl92cu_deinit_sw_vars(struc
-       }
- }
-+/* get bt coexist status */
-+static bool rtl92cu_get_btc_status(void)
-+{
-+      return false;
-+}
-+
- static struct rtl_hal_ops rtl8192cu_hal_ops = {
-       .init_sw_vars = rtl92cu_init_sw_vars,
-       .deinit_sw_vars = rtl92cu_deinit_sw_vars,
-@@ -148,6 +154,7 @@ static struct rtl_hal_ops rtl8192cu_hal_
-       .phy_set_bw_mode_callback = rtl92cu_phy_set_bw_mode_callback,
-       .dm_dynamic_txpower = rtl92cu_dm_dynamic_txpower,
-       .fill_h2c_cmd = rtl92c_fill_h2c_cmd,
-+      .get_btc_status = rtl92cu_get_btc_status,
- };
- static struct rtl_mod_params rtl92cu_mod_params = {
diff --git a/package/kernel/mac80211/patches/345-rtl8192cu-Call-ieee80211_register_hw-from-rtl_usb_pr.patch b/package/kernel/mac80211/patches/345-rtl8192cu-Call-ieee80211_register_hw-from-rtl_usb_pr.patch
deleted file mode 100644 (file)
index b416624..0000000
+++ /dev/null
@@ -1,33 +0,0 @@
-From: Karsten Wiese <fzuuzf@googlemail.com>
-Date: Wed, 22 Oct 2014 15:47:33 +0200
-Subject: [PATCH] rtl8192cu: Call ieee80211_register_hw from rtl_usb_probe
-
-In a previous patch the call to ieee80211_register_hw was moved from the
-load firmware callback to the rtl_pci_probe only.
-rt8192cu also uses this callback. Currently it doesnt create a wlan%d device.
-Fill in the call to ieee80211_register_hw in rtl_usb_probe.
-
-Signed-off-by: Karsten Wiese <fzuuzf@googlemail.com>
----
-
---- a/drivers/net/wireless/rtlwifi/usb.c
-+++ b/drivers/net/wireless/rtlwifi/usb.c
-@@ -1117,7 +1117,18 @@ int rtl_usb_probe(struct usb_interface *
-       }
-       rtlpriv->cfg->ops->init_sw_leds(hw);
-+      err = ieee80211_register_hw(hw);
-+      if (err) {
-+              RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
-+                       "Can't register mac80211 hw.\n");
-+              err = -ENODEV;
-+              goto error_out;
-+      }
-+      rtlpriv->mac80211.mac80211_registered = 1;
-+
-+      set_bit(RTL_STATUS_INTERFACE_START, &rtlpriv->status);
-       return 0;
-+
- error_out:
-       rtl_deinit_core(hw);
-       _rtl_usb_io_handler_release(hw);
diff --git a/package/kernel/mac80211/patches/346-rtl8192cu-Prevent-Ooops-under-rtl92c_set_fw_rsvdpage.patch b/package/kernel/mac80211/patches/346-rtl8192cu-Prevent-Ooops-under-rtl92c_set_fw_rsvdpage.patch
deleted file mode 100644 (file)
index 38f0b34..0000000
+++ /dev/null
@@ -1,107 +0,0 @@
-From: Karsten Wiese <fzuuzf@googlemail.com>
-Date: Wed, 22 Oct 2014 15:47:34 +0200
-Subject: [PATCH] rtl8192cu: Prevent Ooops under rtl92c_set_fw_rsvdpagepkt
-
-rtl92c_set_fw_rsvdpagepkt is used by rtl8192cu and its pci sibling rtl8192ce.
-rtl_cmd_send_packet crashes when called inside rtl8192cu because it works on
-memory allocated only by rtl8192ce.
-Fix the crash by calling a dummy function when used in rtl8192cu.
-Comparision with the realtek vendor driver makes me think, something is missing in
-the dummy function.
-Short test as WPA2 station show good results connected to an 802.11g basestation.
-Traffic stops after few MBytes as WPA2 station connected to an 802.11n basestation.
-
-Signed-off-by: Karsten Wiese <fzuuzf@googlemail.com>
----
-
---- a/drivers/net/wireless/rtlwifi/rtl8192c/fw_common.c
-+++ b/drivers/net/wireless/rtlwifi/rtl8192c/fw_common.c
-@@ -656,7 +656,8 @@ static u8 reserved_page_packet[TOTAL_RES
-       0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- };
--void rtl92c_set_fw_rsvdpagepkt(struct ieee80211_hw *hw, bool b_dl_finished)
-+void rtl92c_set_fw_rsvdpagepkt(struct ieee80211_hw *hw,
-+       bool (*cmd_send_packet)(struct ieee80211_hw *, struct sk_buff *))
- {
-       struct rtl_priv *rtlpriv = rtl_priv(hw);
-       struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
-@@ -722,7 +723,10 @@ void rtl92c_set_fw_rsvdpagepkt(struct ie
-       memcpy((u8 *)skb_put(skb, totalpacketlen),
-              &reserved_page_packet, totalpacketlen);
--      rtstatus = rtl_cmd_send_packet(hw, skb);
-+      if (cmd_send_packet)
-+              rtstatus = cmd_send_packet(hw, skb);
-+      else
-+              rtstatus = rtl_cmd_send_packet(hw, skb);
-       if (rtstatus)
-               b_dlok = true;
---- a/drivers/net/wireless/rtlwifi/rtl8192c/fw_common.h
-+++ b/drivers/net/wireless/rtlwifi/rtl8192c/fw_common.h
-@@ -109,7 +109,9 @@ void rtl92c_fill_h2c_cmd(struct ieee8021
-                        u32 cmd_len, u8 *p_cmdbuffer);
- void rtl92c_firmware_selfreset(struct ieee80211_hw *hw);
- void rtl92c_set_fw_pwrmode_cmd(struct ieee80211_hw *hw, u8 mode);
--void rtl92c_set_fw_rsvdpagepkt(struct ieee80211_hw *hw, bool b_dl_finished);
-+void rtl92c_set_fw_rsvdpagepkt
-+      (struct ieee80211_hw *hw,
-+       bool (*cmd_send_packet)(struct ieee80211_hw *, struct sk_buff *));
- void rtl92c_set_fw_joinbss_report_cmd(struct ieee80211_hw *hw, u8 mstatus);
- void usb_writeN_async(struct rtl_priv *rtlpriv, u32 addr, void *data, u16 len);
- void rtl92c_set_p2p_ps_offload_cmd(struct ieee80211_hw *hw, u8 p2p_ps_state);
---- a/drivers/net/wireless/rtlwifi/rtl8192ce/hw.c
-+++ b/drivers/net/wireless/rtlwifi/rtl8192ce/hw.c
-@@ -459,7 +459,7 @@ void rtl92ce_set_hw_reg(struct ieee80211
-                               rtl_write_byte(rtlpriv, REG_FWHW_TXQ_CTRL + 2,
-                                              tmp_reg422 & (~BIT(6)));
--                              rtl92c_set_fw_rsvdpagepkt(hw, 0);
-+                              rtl92c_set_fw_rsvdpagepkt(hw, NULL);
-                               _rtl92ce_set_bcn_ctrl_reg(hw, BIT(3), 0);
-                               _rtl92ce_set_bcn_ctrl_reg(hw, 0, BIT(4));
---- a/drivers/net/wireless/rtlwifi/rtl8192cu/hw.c
-+++ b/drivers/net/wireless/rtlwifi/rtl8192cu/hw.c
-@@ -1592,6 +1592,20 @@ void rtl92cu_get_hw_reg(struct ieee80211
-       }
- }
-+bool usb_cmd_send_packet(struct ieee80211_hw *hw, struct sk_buff *skb)
-+{
-+  /* Currently nothing happens here.
-+   * Traffic stops after some seconds in WPA2 802.11n mode.
-+   * Maybe because rtl8192cu chip should be set from here?
-+   * If I understand correctly, the realtek vendor driver sends some urbs
-+   * if its "here".
-+   *
-+   * This is maybe necessary:
-+   * rtlpriv->cfg->ops->fill_tx_cmddesc(hw, buffer, 1, 1, skb);
-+   */
-+      return true;
-+}
-+
- void rtl92cu_set_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val)
- {
-       struct rtl_priv *rtlpriv = rtl_priv(hw);
-@@ -1939,7 +1953,8 @@ void rtl92cu_set_hw_reg(struct ieee80211
-                                       recover = true;
-                               rtl_write_byte(rtlpriv, REG_FWHW_TXQ_CTRL + 2,
-                                              tmp_reg422 & (~BIT(6)));
--                              rtl92c_set_fw_rsvdpagepkt(hw, 0);
-+                              rtl92c_set_fw_rsvdpagepkt(hw,
-+                                                        &usb_cmd_send_packet);
-                               _rtl92cu_set_bcn_ctrl_reg(hw, BIT(3), 0);
-                               _rtl92cu_set_bcn_ctrl_reg(hw, 0, BIT(4));
-                               if (recover)
---- a/drivers/net/wireless/rtlwifi/rtl8192cu/hw.h
-+++ b/drivers/net/wireless/rtlwifi/rtl8192cu/hw.h
-@@ -104,7 +104,6 @@ bool rtl92cu_gpio_radio_on_off_checking(
- void rtl92cu_set_check_bssid(struct ieee80211_hw *hw, bool check_bssid);
- int rtl92c_download_fw(struct ieee80211_hw *hw);
- void rtl92c_set_fw_pwrmode_cmd(struct ieee80211_hw *hw, u8 mode);
--void rtl92c_set_fw_rsvdpagepkt(struct ieee80211_hw *hw, bool dl_finished);
- void rtl92c_set_fw_joinbss_report_cmd(struct ieee80211_hw *hw, u8 mstatus);
- void rtl92c_fill_h2c_cmd(struct ieee80211_hw *hw,
-                        u8 element_id, u32 cmd_len, u8 *p_cmdbuffer);
diff --git a/package/kernel/mac80211/patches/347-mac80211-flush-keys-for-AP-mode-on-ieee80211_do_stop.patch b/package/kernel/mac80211/patches/347-mac80211-flush-keys-for-AP-mode-on-ieee80211_do_stop.patch
deleted file mode 100644 (file)
index 94cd7c1..0000000
+++ /dev/null
@@ -1,23 +0,0 @@
-From: Felix Fietkau <nbd@openwrt.org>
-Date: Mon, 27 Oct 2014 11:50:28 +0100
-Subject: [PATCH] mac80211: flush keys for AP mode on ieee80211_do_stop
-
-Userspace can add keys to an AP mode interface before start_ap has been
-called. If there have been no calls to start_ap/stop_ap in the mean
-time, the keys will still be around when the interface is brought down.
-
-Signed-off-by: Felix Fietkau <nbd@openwrt.org>
----
-
---- a/net/mac80211/iface.c
-+++ b/net/mac80211/iface.c
-@@ -931,9 +931,6 @@ static void ieee80211_do_stop(struct iee
-                * another CPU.
-                */
-               ieee80211_free_keys(sdata, true);
--
--              /* fall through */
--      case NL80211_IFTYPE_AP:
-               skb_queue_purge(&sdata->skb_queue);
-       }
diff --git a/package/kernel/mac80211/patches/348-ath9k-Fix-RTC_DERIVED_CLK-usage.patch b/package/kernel/mac80211/patches/348-ath9k-Fix-RTC_DERIVED_CLK-usage.patch
deleted file mode 100644 (file)
index a9205c0..0000000
+++ /dev/null
@@ -1,61 +0,0 @@
-From: Miaoqing Pan <miaoqing@qca.qualcomm.com>
-Date: Thu, 6 Nov 2014 10:52:23 +0530
-Subject: [PATCH] ath9k: Fix RTC_DERIVED_CLK usage
-
-Based on the reference clock, which could be 25MHz or 40MHz,
-AR_RTC_DERIVED_CLK is programmed differently for AR9340 and AR9550.
-But, when a chip reset is done, processing the initvals
-sets the register back to the default value.
-
-Fix this by moving the code in ath9k_hw_init_pll() to
-ar9003_hw_override_ini(). Also, do this override for AR9531.
-
-Cc: stable@vger.kernel.org
-Signed-off-by: Miaoqing Pan <miaoqing@qca.qualcomm.com>
-Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
----
-
---- a/drivers/net/wireless/ath/ath9k/ar9003_phy.c
-+++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.c
-@@ -664,6 +664,19 @@ static void ar9003_hw_override_ini(struc
-               ah->enabled_cals |= TX_CL_CAL;
-       else
-               ah->enabled_cals &= ~TX_CL_CAL;
-+
-+      if (AR_SREV_9340(ah) || AR_SREV_9531(ah) || AR_SREV_9550(ah)) {
-+              if (ah->is_clk_25mhz) {
-+                      REG_WRITE(ah, AR_RTC_DERIVED_CLK, 0x17c << 1);
-+                      REG_WRITE(ah, AR_SLP32_MODE, 0x0010f3d7);
-+                      REG_WRITE(ah, AR_SLP32_INC, 0x0001e7ae);
-+              } else {
-+                      REG_WRITE(ah, AR_RTC_DERIVED_CLK, 0x261 << 1);
-+                      REG_WRITE(ah, AR_SLP32_MODE, 0x0010f400);
-+                      REG_WRITE(ah, AR_SLP32_INC, 0x0001e800);
-+              }
-+              udelay(100);
-+      }
- }
- static void ar9003_hw_prog_ini(struct ath_hw *ah,
---- a/drivers/net/wireless/ath/ath9k/hw.c
-+++ b/drivers/net/wireless/ath/ath9k/hw.c
-@@ -870,19 +870,6 @@ static void ath9k_hw_init_pll(struct ath
-       udelay(RTC_PLL_SETTLE_DELAY);
-       REG_WRITE(ah, AR_RTC_SLEEP_CLK, AR_RTC_FORCE_DERIVED_CLK);
--
--      if (AR_SREV_9340(ah) || AR_SREV_9550(ah)) {
--              if (ah->is_clk_25mhz) {
--                      REG_WRITE(ah, AR_RTC_DERIVED_CLK, 0x17c << 1);
--                      REG_WRITE(ah, AR_SLP32_MODE, 0x0010f3d7);
--                      REG_WRITE(ah,  AR_SLP32_INC, 0x0001e7ae);
--              } else {
--                      REG_WRITE(ah, AR_RTC_DERIVED_CLK, 0x261 << 1);
--                      REG_WRITE(ah, AR_SLP32_MODE, 0x0010f400);
--                      REG_WRITE(ah,  AR_SLP32_INC, 0x0001e800);
--              }
--              udelay(100);
--      }
- }
- static void ath9k_hw_init_interrupt_masks(struct ath_hw *ah,
diff --git a/package/kernel/mac80211/patches/349-b43-fix-NULL-pointer-dereference-in-b43_phy_copy.patch b/package/kernel/mac80211/patches/349-b43-fix-NULL-pointer-dereference-in-b43_phy_copy.patch
deleted file mode 100644 (file)
index 649ed6b..0000000
+++ /dev/null
@@ -1,38 +0,0 @@
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Wed, 5 Nov 2014 23:31:07 +0100
-Subject: [PATCH] b43: fix NULL pointer dereference in b43_phy_copy()
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-phy_read and phy_write are not set for every phy any more sine this:
-commit d342b95dd735014a590f9051b1ba227eb54ca8f6
-Author: RafaÅ‚ MiÅ‚ecki <zajec5@gmail.com>
-Date:   Thu Jul 31 21:59:43 2014 +0200
-
-    b43: don't duplicate common PHY read/write ops
-
-b43_phy_copy() accesses phy_read and phy_write directly and will fail
-with some phys. This patch fixes the regression by using the
-b43_phy_read() and b43_phy_write() functions which should be used for
-read and write access.
-
-This should fix this bug report:
-https://bugzilla.kernel.org/show_bug.cgi?id=87731
-
-Reported-by: Volker Kempter <v.kempter@pe.tu-clausthal.de>
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
----
-
---- a/drivers/net/wireless/b43/phy_common.c
-+++ b/drivers/net/wireless/b43/phy_common.c
-@@ -301,8 +301,7 @@ void b43_phy_write(struct b43_wldev *dev
- void b43_phy_copy(struct b43_wldev *dev, u16 destreg, u16 srcreg)
- {
-       assert_mac_suspended(dev);
--      dev->phy.ops->phy_write(dev, destreg,
--              dev->phy.ops->phy_read(dev, srcreg));
-+      b43_phy_write(dev, destreg, b43_phy_read(dev, srcreg));
- }
- void b43_phy_mask(struct b43_wldev *dev, u16 offset, u16 mask)
diff --git a/package/kernel/mac80211/patches/350-ath9k-fix-misc-debugfs-when-not-using-chan-context.patch b/package/kernel/mac80211/patches/350-ath9k-fix-misc-debugfs-when-not-using-chan-context.patch
deleted file mode 100644 (file)
index 30b3dcf..0000000
+++ /dev/null
@@ -1,33 +0,0 @@
-From: Ben Greear <greearb@candelatech.com>
-Date: Tue, 4 Nov 2014 15:22:49 -0800
-Subject: [PATCH] ath9k: fix misc debugfs when not using chan context
-
-When channel-context is not enabled, all vifs belong to
-the first context, but it is not configured as 'assigned'.
-
-Fix misc debugfs file to print out info for non-assigned
-contexts, and also print whether ctx is assigned or not.
-
-Signed-off-by: Ben Greear <greearb@candelatech.com>
----
-
---- a/drivers/net/wireless/ath/ath9k/debug.c
-+++ b/drivers/net/wireless/ath/ath9k/debug.c
-@@ -828,13 +828,14 @@ static ssize_t read_file_misc(struct fil
-       i = 0;
-       ath_for_each_chanctx(sc, ctx) {
--              if (!ctx->assigned || list_empty(&ctx->vifs))
-+              if (list_empty(&ctx->vifs))
-                       continue;
-               ath9k_calculate_iter_data(sc, ctx, &iter_data);
-               len += scnprintf(buf + len, sizeof(buf) - len,
--                      "VIF-COUNTS: CTX %i AP: %i STA: %i MESH: %i WDS: %i",
--                      i++, iter_data.naps, iter_data.nstations,
-+                      "VIFS: CTX %i(%i) AP: %i STA: %i MESH: %i WDS: %i",
-+                      i++, (int)(ctx->assigned), iter_data.naps,
-+                      iter_data.nstations,
-                       iter_data.nmeshes, iter_data.nwds);
-               len += scnprintf(buf + len, sizeof(buf) - len,
-                       " ADHOC: %i TOTAL: %hi BEACON-VIF: %hi\n",
diff --git a/package/kernel/mac80211/patches/351-ath9k-fix-regression-in-bssidmask-calculation.patch b/package/kernel/mac80211/patches/351-ath9k-fix-regression-in-bssidmask-calculation.patch
deleted file mode 100644 (file)
index d596392..0000000
+++ /dev/null
@@ -1,70 +0,0 @@
-From: Ben Greear <greearb@candelatech.com>
-Date: Tue, 4 Nov 2014 15:22:50 -0800
-Subject: [PATCH] ath9k: fix regression in bssidmask calculation
-
-The commit that went into 3.17:
-
-    ath9k: Summarize hw state per channel context
-
-    Group and set hw state (opmode, primary_sta, beacon conf) per
-    channel context instead of whole list of vifs. This would allow
-    each channel context to run in different mode (STA/AP).
-
-    Signed-off-by: Felix Fietkau <nbd@openwrt.org>
-    Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com>
-    Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
-broke multi-vif configuration due to not properly calculating
-the bssid mask.
-
-The test case that caught this was:
-
- create wlan0 and sta0-4 (6 total), not sure how much that matters.
- associate all 6 (works fine)
- disconnect 5 of them, leaving sta0 up
- Start trying to bring up the other 5 one at a time.  It will
- fail, with iw events looking like this (in these logs, several
- sta are trying to come up, but symptom is the same with just one)
-
-The patch causing the regression made quite a few changes, but
-the part I think caused this particular problem was not
-recalculating the bssid mask when adding and removing interfaces.
-
-Re-adding those calls fixes my test case.  Fix bad comment
-as well.
-
-Signed-off-by: Ben Greear <greearb@candelatech.com>
----
-
---- a/drivers/net/wireless/ath/ath9k/main.c
-+++ b/drivers/net/wireless/ath/ath9k/main.c
-@@ -994,9 +994,8 @@ void ath9k_calculate_iter_data(struct at
-       struct ath_vif *avp;
-       /*
--       * Pick the MAC address of the first interface as the new hardware
--       * MAC address. The hardware will use it together with the BSSID mask
--       * when matching addresses.
-+       * The hardware will use primary station addr together with the
-+       * BSSID mask when matching addresses.
-        */
-       memset(iter_data, 0, sizeof(*iter_data));
-       memset(&iter_data->mask, 0xff, ETH_ALEN);
-@@ -1225,6 +1224,8 @@ static int ath9k_add_interface(struct ie
-               list_add_tail(&avp->list, &avp->chanctx->vifs);
-       }
-+      ath9k_calculate_summary_state(sc, avp->chanctx);
-+
-       ath9k_assign_hw_queues(hw, vif);
-       an->sc = sc;
-@@ -1294,6 +1295,8 @@ static void ath9k_remove_interface(struc
-       ath_tx_node_cleanup(sc, &avp->mcast_node);
-+      ath9k_calculate_summary_state(sc, avp->chanctx);
-+
-       mutex_unlock(&sc->mutex);
- }
diff --git a/package/kernel/mac80211/patches/352-mac80211-fix-use-after-free-in-defragmentation.patch b/package/kernel/mac80211/patches/352-mac80211-fix-use-after-free-in-defragmentation.patch
deleted file mode 100644 (file)
index f7472e0..0000000
+++ /dev/null
@@ -1,50 +0,0 @@
-From: Johannes Berg <johannes.berg@intel.com>
-Date: Mon, 3 Nov 2014 14:29:09 +0100
-Subject: [PATCH] mac80211: fix use-after-free in defragmentation
-
-Upon receiving the last fragment, all but the first fragment
-are freed, but the multicast check for statistics at the end
-of the function refers to the current skb (the last fragment)
-causing a use-after-free bug.
-
-Since multicast frames cannot be fragmented and we check for
-this early in the function, just modify that check to also
-do the accounting to fix the issue.
-
-Cc: stable@vger.kernel.org
-Reported-by: Yosef Khyal <yosefx.khyal@intel.com>
-Signed-off-by: Johannes Berg <johannes.berg@intel.com>
----
-
---- a/net/mac80211/rx.c
-+++ b/net/mac80211/rx.c
-@@ -1678,11 +1678,14 @@ ieee80211_rx_h_defragment(struct ieee802
-       sc = le16_to_cpu(hdr->seq_ctrl);
-       frag = sc & IEEE80211_SCTL_FRAG;
--      if (likely((!ieee80211_has_morefrags(fc) && frag == 0) ||
--                 is_multicast_ether_addr(hdr->addr1))) {
--              /* not fragmented */
-+      if (likely(!ieee80211_has_morefrags(fc) && frag == 0))
-+              goto out;
-+
-+      if (is_multicast_ether_addr(hdr->addr1)) {
-+              rx->local->dot11MulticastReceivedFrameCount++;
-               goto out;
-       }
-+
-       I802_DEBUG_INC(rx->local->rx_handlers_fragments);
-       if (skb_linearize(rx->skb))
-@@ -1775,10 +1778,7 @@ ieee80211_rx_h_defragment(struct ieee802
-  out:
-       if (rx->sta)
-               rx->sta->rx_packets++;
--      if (is_multicast_ether_addr(hdr->addr1))
--              rx->local->dot11MulticastReceivedFrameCount++;
--      else
--              ieee80211_led_rx(rx->local);
-+      ieee80211_led_rx(rx->local);
-       return RX_CONTINUE;
- }
diff --git a/package/kernel/mac80211/patches/353-rt2x00-do-not-align-payload-on-modern-H-W.patch b/package/kernel/mac80211/patches/353-rt2x00-do-not-align-payload-on-modern-H-W.patch
deleted file mode 100644 (file)
index 384a0be..0000000
+++ /dev/null
@@ -1,95 +0,0 @@
-From: Stanislaw Gruszka <sgruszka@redhat.com>
-Date: Sun, 2 Nov 2014 13:38:47 +0100
-Subject: [PATCH] rt2x00: do not align payload on modern H/W
-
-RT2800 and newer hardware require padding between header and payload if
-header length is not multiple of 4.
-
-For historical reasons we also align payload to to 4 bytes boundary, but
-such alignment is not needed on modern H/W.
-
-Patch improve performance on embedded CPUs and _possibly_ fixes
-skb_under_panic problems reported from time to time:
-
-https://bugzilla.kernel.org/show_bug.cgi?id=84911
-https://bugzilla.kernel.org/show_bug.cgi?id=72471
-http://marc.info/?l=linux-wireless&m=139108549530402&w=2
-https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1087591
-
-But we can not explain or otherwise confirm the patch fixes this panic
-issue for sure.
-
-Originally-From: Helmut Schaa <helmut.schaa@googlemail.com>
-Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
----
-
---- a/drivers/net/wireless/rt2x00/rt2x00queue.c
-+++ b/drivers/net/wireless/rt2x00/rt2x00queue.c
-@@ -158,55 +158,29 @@ void rt2x00queue_align_frame(struct sk_b
-       skb_trim(skb, frame_length);
- }
--void rt2x00queue_insert_l2pad(struct sk_buff *skb, unsigned int header_length)
-+/*
-+ * H/W needs L2 padding between the header and the paylod if header size
-+ * is not 4 bytes aligned.
-+ */
-+void rt2x00queue_insert_l2pad(struct sk_buff *skb, unsigned int hdr_len)
- {
--      unsigned int payload_length = skb->len - header_length;
--      unsigned int header_align = ALIGN_SIZE(skb, 0);
--      unsigned int payload_align = ALIGN_SIZE(skb, header_length);
--      unsigned int l2pad = payload_length ? L2PAD_SIZE(header_length) : 0;
-+      unsigned int l2pad = (skb->len > hdr_len) ? L2PAD_SIZE(hdr_len) : 0;
--      /*
--       * Adjust the header alignment if the payload needs to be moved more
--       * than the header.
--       */
--      if (payload_align > header_align)
--              header_align += 4;
--
--      /* There is nothing to do if no alignment is needed */
--      if (!header_align)
-+      if (!l2pad)
-               return;
--      /* Reserve the amount of space needed in front of the frame */
--      skb_push(skb, header_align);
--
--      /*
--       * Move the header.
--       */
--      memmove(skb->data, skb->data + header_align, header_length);
--
--      /* Move the payload, if present and if required */
--      if (payload_length && payload_align)
--              memmove(skb->data + header_length + l2pad,
--                      skb->data + header_length + l2pad + payload_align,
--                      payload_length);
--
--      /* Trim the skb to the correct size */
--      skb_trim(skb, header_length + l2pad + payload_length);
-+      skb_push(skb, l2pad);
-+      memmove(skb->data, skb->data + l2pad, hdr_len);
- }
--void rt2x00queue_remove_l2pad(struct sk_buff *skb, unsigned int header_length)
-+void rt2x00queue_remove_l2pad(struct sk_buff *skb, unsigned int hdr_len)
- {
--      /*
--       * L2 padding is only present if the skb contains more than just the
--       * IEEE 802.11 header.
--       */
--      unsigned int l2pad = (skb->len > header_length) ?
--                              L2PAD_SIZE(header_length) : 0;
-+      unsigned int l2pad = (skb->len > hdr_len) ? L2PAD_SIZE(hdr_len) : 0;
-       if (!l2pad)
-               return;
--      memmove(skb->data + l2pad, skb->data, header_length);
-+      memmove(skb->data + l2pad, skb->data, hdr_len);
-       skb_pull(skb, l2pad);
- }
index 73c8828c36683e4b887e68ea162473935fcb6028..3c1bfeeb5e67e2b3dc1a951f0dfd0def1b226477 100644 (file)
@@ -59,7 +59,7 @@
        ---help---
 --- a/.local-symbols
 +++ b/.local-symbols
-@@ -112,6 +112,7 @@ RTL8187_LEDS=
+@@ -116,6 +116,7 @@ RTL8187_LEDS=
  ATH_COMMON=
  ATH_CARDS=
  ATH_DEBUG=
index 3ae92a688ab62c6df5389e17def8b5969f36c9e8..d2c6c5fc303113861834f665b893c0b8c5d73ef2 100644 (file)
@@ -11,7 +11,7 @@ drivers/net/wireless/ath/ath5k/debug.c |   86 ++++++++++++++++++++++++++++++++
 
 --- a/drivers/net/wireless/ath/ath5k/debug.c
 +++ b/drivers/net/wireless/ath/ath5k/debug.c
-@@ -822,6 +822,97 @@ static const struct file_operations fops
+@@ -823,6 +823,97 @@ static const struct file_operations fops
        .llseek = default_llseek,
  };
  
@@ -109,7 +109,7 @@ drivers/net/wireless/ath/ath5k/debug.c |   86 ++++++++++++++++++++++++++++++++
  
  /* debugfs: queues etc */
  
-@@ -1009,6 +1100,9 @@ ath5k_debug_init_device(struct ath5k_hw 
+@@ -1010,6 +1101,9 @@ ath5k_debug_init_device(struct ath5k_hw 
        debugfs_create_file("beacon", S_IWUSR | S_IRUSR, phydir, ah,
                            &fops_beacon);
  
index a6119c554482b9f6a80b4268e92dc1381810d37b..32fde8fc1b6bd04311f50036a132f651f9cfdb08 100644 (file)
@@ -1,6 +1,6 @@
 --- a/include/net/cfg80211.h
 +++ b/include/net/cfg80211.h
-@@ -2214,6 +2214,7 @@ struct cfg80211_qos_map {
+@@ -2245,6 +2245,7 @@ struct cfg80211_qos_map {
   *    (as advertised by the nl80211 feature flag.)
   * @get_tx_power: store the current TX power into the dbm variable;
   *    return 0 if successful
@@ -8,7 +8,7 @@
   *
   * @set_wds_peer: set the WDS peer for a WDS interface
   *
-@@ -2450,6 +2451,7 @@ struct cfg80211_ops {
+@@ -2495,6 +2496,7 @@ struct cfg80211_ops {
                                enum nl80211_tx_power_setting type, int mbm);
        int     (*get_tx_power)(struct wiphy *wiphy, struct wireless_dev *wdev,
                                int *dbm);
@@ -18,7 +18,7 @@
                                const u8 *addr);
 --- a/include/net/mac80211.h
 +++ b/include/net/mac80211.h
-@@ -1075,6 +1075,7 @@ enum ieee80211_smps_mode {
+@@ -1078,6 +1078,7 @@ enum ieee80211_smps_mode {
   *
   * @power_level: requested transmit power (in dBm), backward compatibility
   *    value only that is set to the minimum of all interfaces
@@ -26,7 +26,7 @@
   *
   * @chandef: the channel definition to tune to
   * @radar_enabled: whether radar detection is enabled
-@@ -1096,6 +1097,7 @@ struct ieee80211_conf {
+@@ -1099,6 +1100,7 @@ struct ieee80211_conf {
        u32 flags;
        int power_level, dynamic_ps_timeout;
        int max_sleep_period;
@@ -36,7 +36,7 @@
        u8 ps_dtim_period;
 --- a/include/uapi/linux/nl80211.h
 +++ b/include/uapi/linux/nl80211.h
-@@ -1638,6 +1638,9 @@ enum nl80211_commands {
+@@ -1656,6 +1656,9 @@ enum nl80211_commands {
   * @NL80211_ATTR_SMPS_MODE: SMPS mode to use (ap mode). see
   *    &enum nl80211_smps_mode.
   *
@@ -46,7 +46,7 @@
   * @NL80211_ATTR_MAX: highest attribute number currently defined
   * @__NL80211_ATTR_AFTER_LAST: internal use
   */
-@@ -1990,6 +1993,8 @@ enum nl80211_attrs {
+@@ -2008,6 +2011,8 @@ enum nl80211_attrs {
  
        NL80211_ATTR_SMPS_MODE,
  
@@ -57,7 +57,7 @@
        __NL80211_ATTR_AFTER_LAST,
 --- a/net/mac80211/cfg.c
 +++ b/net/mac80211/cfg.c
-@@ -2091,6 +2091,19 @@ static int ieee80211_get_tx_power(struct
+@@ -2155,6 +2155,19 @@ static int ieee80211_get_tx_power(struct
        return 0;
  }
  
@@ -77,7 +77,7 @@
  static int ieee80211_set_wds_peer(struct wiphy *wiphy, struct net_device *dev,
                                  const u8 *addr)
  {
-@@ -3572,6 +3585,7 @@ const struct cfg80211_ops mac80211_confi
+@@ -3723,6 +3736,7 @@ const struct cfg80211_ops mac80211_confi
        .set_wiphy_params = ieee80211_set_wiphy_params,
        .set_tx_power = ieee80211_set_tx_power,
        .get_tx_power = ieee80211_get_tx_power,
@@ -87,7 +87,7 @@
        CFG80211_TESTMODE_CMD(ieee80211_testmode_cmd)
 --- a/net/mac80211/ieee80211_i.h
 +++ b/net/mac80211/ieee80211_i.h
-@@ -1280,6 +1280,7 @@ struct ieee80211_local {
+@@ -1330,6 +1330,7 @@ struct ieee80211_local {
        int dynamic_ps_forced_timeout;
  
        int user_power_level; /* in dBm, for all interfaces */
        if (local->hw.conf.power_level != power) {
                changed |= IEEE80211_CONF_CHANGE_POWER;
                local->hw.conf.power_level = power;
-@@ -585,6 +591,7 @@ struct ieee80211_hw *ieee80211_alloc_hw(
+@@ -578,6 +584,7 @@ struct ieee80211_hw *ieee80211_alloc_hw_
                                         IEEE80211_RADIOTAP_MCS_HAVE_BW;
        local->hw.radiotap_vht_details = IEEE80211_RADIOTAP_VHT_KNOWN_GI |
                                         IEEE80211_RADIOTAP_VHT_KNOWN_BANDWIDTH;
  };
  
  /* policy for the key attributes */
-@@ -2179,6 +2180,20 @@ static int nl80211_set_wiphy(struct sk_b
+@@ -2184,6 +2185,20 @@ static int nl80211_set_wiphy(struct sk_b
                        return result;
        }
  
index 304eb7dc8abeaa3c57355872fba215a87d05a6fd..9d789b40a7d61b4ea6871201631383c80e48ba2a 100644 (file)
@@ -18,7 +18,7 @@
        void (*spectral_scan_trigger)(struct ath_hw *ah);
 --- a/drivers/net/wireless/ath/ath9k/ar9003_phy.c
 +++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.c
-@@ -1796,6 +1796,26 @@ static void ar9003_hw_tx99_set_txpower(s
+@@ -1799,6 +1799,26 @@ static void ar9003_hw_tx99_set_txpower(s
                  ATH9K_POW_SM(p_pwr_array[ALL_TARGET_HT40_14],  0));
  }
  
@@ -45,7 +45,7 @@
  void ar9003_hw_attach_phy_ops(struct ath_hw *ah)
  {
        struct ath_hw_private_ops *priv_ops = ath9k_hw_private_ops(ah);
-@@ -1831,6 +1851,7 @@ void ar9003_hw_attach_phy_ops(struct ath
+@@ -1834,6 +1854,7 @@ void ar9003_hw_attach_phy_ops(struct ath
        priv_ops->set_radar_params = ar9003_hw_set_radar_params;
        priv_ops->fast_chan_change = ar9003_hw_fast_chan_change;
  
  static inline void ath9k_hw_set_bt_ant_diversity(struct ath_hw *ah, bool enable)
 --- a/drivers/net/wireless/ath/ath9k/ar5008_phy.c
 +++ b/drivers/net/wireless/ath/ath9k/ar5008_phy.c
-@@ -1232,9 +1232,30 @@ static void ar5008_hw_set_radar_conf(str
+@@ -1235,9 +1235,30 @@ static void ar5008_hw_set_radar_conf(str
        conf->radar_inband = 8;
  }
  
        static const u32 ar5416_cca_regs[6] = {
                AR_PHY_CCA,
                AR_PHY_CH1_CCA,
-@@ -1249,6 +1270,8 @@ int ar5008_hw_attach_phy_ops(struct ath_
+@@ -1252,6 +1273,8 @@ int ar5008_hw_attach_phy_ops(struct ath_
        if (ret)
            return ret;
  
index 6b4aedab00dd73f1d4247d316d6ab9e9afd94ee4..c57ec391267d8b38bf4b2ac0e6ef6b3fdf5f21dc 100644 (file)
@@ -1,6 +1,6 @@
 --- a/.local-symbols
 +++ b/.local-symbols
-@@ -285,6 +285,7 @@ RT2X00_LIB_FIRMWARE=
+@@ -289,6 +289,7 @@ RT2X00_LIB_FIRMWARE=
  RT2X00_LIB_CRYPTO=
  RT2X00_LIB_LEDS=
  RT2X00_LIB_DEBUGFS=
index 81a16e25fd1e9c98925cd05f5d8c0f2a6faa26ff..d04c4abb141a1ead1c62963aafeded4fa2555f35 100644 (file)
@@ -1,6 +1,6 @@
 --- a/drivers/net/wireless/ath/ath10k/core.c
 +++ b/drivers/net/wireless/ath/ath10k/core.c
-@@ -250,7 +250,10 @@ static int ath10k_download_and_run_otp(s
+@@ -280,7 +280,10 @@ static int ath10k_download_and_run_otp(s
  
        ath10k_dbg(ar, ATH10K_DBG_BOOT, "boot otp execute result %d\n", result);