WAP54GV3,
WRT54GV1,
WRT54G,
- WRTSL54GS,
WRT54G3G,
- WRT54G3GV2_VF,
- WRT150NV1,
- WRT150NV11,
- WRT160NV1,
- WRT160NV3,
- WRT300NV11,
- WRT310NV1,
WRT350N,
WRT600N,
WRT600NV11,
- WRT610N,
- WRT610NV2,
- E1000V1,
- E1000V21,
- E2000V1,
- E3000V1,
- E3200V1,
- E4200V1,
/* ASUS */
- WLHDD,
- WL300G,
- WL320GE,
- WL330GE,
WL500G,
- WL500GD,
- WL500GP,
- WL500GPV2,
- WL500W,
- WL520GC,
- WL520GU,
ASUS_4702,
- WL700GE,
- RTN12,
- RTN16,
- RTN66U,
/* Buffalo */
WBR2_G54,
- WHR_G54S,
- WHR_HP_G54,
- WHR_G125,
- WHR2_A54G54,
WLA2_G54L,
- WZR_G300N,
- WZR_RS_G54,
- WZR_RS_G54HP,
BUFFALO_UNKNOWN_4710,
/* Siemens */
USR5461,
/* Dell */
- TM2300,
TM2300V2,
/* Motorola */
- WE800G,
WR850GV1,
- WR850GV2V3,
- WR850GP,
-
- /* Belkin */
- BELKIN_F7D4301,
/* Netgear */
WGT634U,
WNR834BV1,
- WNR834BV2,
- WNDR3400V1,
WNDR3700V3,
/* Trendware */
STI_NAS,
/* D-Link */
- DIR130,
DIR320,
- DIR330,
DWL3150,
/* Sitecom */
PS1208MFG,
/* Huawei */
- HUAWEI_E970,
};
static void __init bcm4780_init(void) {
bcm4780_init();
}
-static void __init bcm57xx_init(void) {
- int pin = 1 << 2;
-
- /* FIXME: switch comes up, but port mappings/vlans not right */
- bcm47xx_gpio_outen(pin, pin);
- bcm47xx_gpio_control(pin, 0);
- bcm47xx_gpio_out(pin, pin);
-}
-
static struct platform_t __initdata platforms[] = {
/* Linksys */
[WAP54GV1] = {
{ .name = "wlan", .gpio = 1 << 0, .polarity = REVERSE },
},
},
- [WRTSL54GS] = {
- .name = "Linksys WRTSL54GS",
- .buttons = {
- { .name = "reset", .gpio = 1 << 6 },
- { .name = "ses", .gpio = 1 << 4 },
- },
- .leds = {
- { .name = "power", .gpio = 1 << 1, .polarity = NORMAL },
- { .name = "dmz", .gpio = 1 << 0, .polarity = REVERSE },
- { .name = "ses_white", .gpio = 1 << 5, .polarity = REVERSE },
- { .name = "ses_orange", .gpio = 1 << 7, .polarity = REVERSE },
- },
- },
[WRT54G3G] = {
.name = "Linksys WRT54G3G",
.buttons = {
{ .name = "3g_blink", .gpio = 1 << 5, .polarity = NORMAL },
},
},
- [WRT54G3GV2_VF] = {
- .name = "Linksys WRT54G3GV2-VF",
- .buttons = {
- { .name = "reset", .gpio = 1 << 6 },
- { .name = "3g", .gpio = 1 << 5 },
- },
- .leds = {
- { .name = "power", .gpio = 1 << 1, .polarity = NORMAL },
- { .name = "3g_green", .gpio = 1 << 2, .polarity = NORMAL },
- { .name = "3g_blue", .gpio = 1 << 3, .polarity = NORMAL },
- },
- },
- [WRT150NV1] = {
- .name = "Linksys WRT150N V1",
- .buttons = {
- { .name = "reset", .gpio = 1 << 6 },
- { .name = "ses", .gpio = 1 << 4 },
- },
- .leds = {
- { .name = "power", .gpio = 1 << 1, .polarity = NORMAL },
- { .name = "ses_green", .gpio = 1 << 5, .polarity = REVERSE },
- { .name = "ses_amber", .gpio = 1 << 3, .polarity = REVERSE },
- },
- },
- [WRT150NV11] = {
- .name = "Linksys WRT150N V1.1",
- .buttons = {
- { .name = "reset", .gpio = 1 << 6 },
- { .name = "ses", .gpio = 1 << 4 },
- },
- .leds = {
- { .name = "power", .gpio = 1 << 1, .polarity = NORMAL },
- { .name = "ses_green", .gpio = 1 << 5, .polarity = REVERSE },
- { .name = "ses_amber", .gpio = 1 << 3, .polarity = REVERSE },
- },
- },
- [WRT160NV1] = {
- .name = "Linksys WRT160N v1.x",
- .buttons = {
- { .name = "reset", .gpio = 1 << 6 },
- { .name = "ses", .gpio = 1 << 4 },
- },
- .leds = {
- { .name = "power", .gpio = 1 << 1, .polarity = NORMAL },
- { .name = "ses_blue", .gpio = 1 << 5, .polarity = REVERSE },
- { .name = "ses_orange", .gpio = 1 << 3, .polarity = REVERSE },
- },
- },
- [WRT160NV3] = {
- .name = "Linksys WRT160N V3",
- .buttons = {
- { .name = "reset", .gpio = 1 << 6 },
- { .name = "ses", .gpio = 1 << 5 },
- },
- .leds = {
- { .name = "power", .gpio = 1 << 1, .polarity = NORMAL },
- { .name = "ses_blue", .gpio = 1 << 4, .polarity = REVERSE },
- { .name = "ses_orange", .gpio = 1 << 2, .polarity = REVERSE },
- },
- },
- [WRT300NV11] = {
- .name = "Linksys WRT300N V1.1",
- .buttons = {
- { .name = "reset", .gpio = 1 << 6 }, // "Reset" on back panel
- { .name = "ses", .gpio = 1 << 4 }, // "Reserved" on top panel
- },
- .leds = {
- { .name = "power", .gpio = 1 << 1, .polarity = NORMAL }, // "Power"
- { .name = "ses_amber", .gpio = 1 << 3, .polarity = REVERSE }, // "Security" Amber
- { .name = "ses_green", .gpio = 1 << 5, .polarity = REVERSE }, // "Security" Green
- },
- .platform_init = bcm57xx_init,
- },
- [WRT310NV1] = {
- .name = "Linksys WRT310N V1",
- .buttons = {
- { .name = "reset", .gpio = 1 << 6 }, // "Reset" on back panel
- { .name = "ses", .gpio = 1 << 8 }, // "Reserved" on top panel
- },
- .leds = {
- { .name = "power", .gpio = 1 << 1, .polarity = NORMAL }, // Power LED
- { .name = "ses_amber", .gpio = 1 << 3, .polarity = REVERSE }, // "Security" Amber
- { .name = "ses_blue", .gpio = 1 << 9, .polarity = REVERSE }, // "Security" Blue
- },
- },
[WRT350N] = {
.name = "Linksys WRT350N",
.buttons = {
{ .name = "usb_blink", .gpio = 1 << 10, .polarity = REVERSE },
{ .name = "usb", .gpio = 1 << 11, .polarity = REVERSE },
},
- .platform_init = bcm57xx_init,
},
[WRT600N] = {
.name = "Linksys WRT600N",
{ .name = "wl1_ses_amber", .gpio = 1 << 10, .polarity = REVERSE }, // 5.6Ghz LED Amber
{ .name = "wl1_ses_green", .gpio = 1 << 11, .polarity = REVERSE }, // 5.6Ghz LED Green
},
- .platform_init = bcm57xx_init,
},
[WRT600NV11] = {
.name = "Linksys WRT600N V1.1",
{ .name = "wl1_ses_amber", .gpio = 1 << 10, .polarity = REVERSE }, // 5.6Ghz LED Amber
{ .name = "wl1_ses_green", .gpio = 1 << 11, .polarity = REVERSE }, // 5.6Ghz LED Green
},
- .platform_init = bcm57xx_init,
- },
- [WRT610N] = {
- .name = "Linksys WRT610N",
- .buttons = {
- { .name = "reset", .gpio = 1 << 6 },
- { .name = "ses", .gpio = 1 << 8 },
- },
- .leds = {
- { .name = "power", .gpio = 1 << 1, .polarity = NORMAL }, // Power LED
- { .name = "usb", .gpio = 1 << 0, .polarity = REVERSE }, // USB LED
- { .name = "ses_amber", .gpio = 1 << 3, .polarity = REVERSE }, // WiFi protected setup LED amber
- { .name = "ses_blue", .gpio = 1 << 9, .polarity = REVERSE }, // WiFi protected setup LED blue
- },
- },
- [WRT610NV2] = {
- .name = "Linksys WRT610N V2",
- .buttons = {
- { .name = "reset", .gpio = 1 << 6 },
- { .name = "ses", .gpio = 1 << 4 },
- },
- .leds = {
- { .name = "power", .gpio = 1 << 5, .polarity = NORMAL }, // Power LED
- { .name = "usb", .gpio = 1 << 7, .polarity = NORMAL }, // USB LED
- { .name = "ses_amber", .gpio = 1 << 0, .polarity = REVERSE }, // WiFi protected setup LED amber
- { .name = "ses_blue", .gpio = 1 << 3, .polarity = REVERSE }, // WiFi protected setup LED blue
- { .name = "wlan", .gpio = 1 << 1, .polarity = NORMAL }, // Wireless LED
- },
- },
- /* same hardware as WRT160NV3 and Cisco Valet M10V1, but different board detection, combine? */
- [E1000V1] = {
- .name = "Linksys E1000 V1",
- .buttons = {
- { .name = "reset", .gpio = 1 << 6 },
- { .name = "wps", .gpio = 1 << 5 }, /* nvram get gpio5=wps_button */
- },
- .leds = {
- /** turns on leds for all ethernet ports (wan too)
- * this also disconnects some, or maybe all, ethernet ports
- * 1: leds work normally
- * 0: all lit all the time */
- /* nvram get gpio3=robo_reset */
- { .name = "wlan", .gpio = 1 << 0, .polarity = NORMAL },
- { .name = "power", .gpio = 1 << 1, .polarity = NORMAL },
- { .name = "ses_blue", .gpio = 1 << 4, .polarity = REVERSE }, /* nvram get gpio4=wps_led */
- { .name = "ses_orange", .gpio = 1 << 2, .polarity = REVERSE }, /* nvram get gpio2=wps_status_led */
- },
- },
- [E1000V21] = {
- .name = "Linksys E1000 V2.1",
- .buttons = {
- { .name = "reset", .gpio = 1 << 10 }, /* nvram get reset_gpio=10 */
- { .name = "wps", .gpio = 1 << 9 }, /* nvram get gpio9=wps_button */
- },
- .leds = {
- { .name = "power", .gpio = 1 << 6, .polarity = REVERSE },
- { .name = "wlan", .gpio = 1 << 5, .polarity = NORMAL },
- { .name = "ses_blue", .gpio = 1 << 8, .polarity = NORMAL }, /* nvram get gpio8=wps_led */
- { .name = "ses_orange", .gpio = 1 << 7, .polarity = NORMAL }, /* nvram get gpio7=wps_status_led */
- },
- },
- [E2000V1] = {
- .name = "Linksys E2000 V1",
- .buttons = {
- { .name = "reset", .gpio = 1 << 8 },
- { .name = "ses", .gpio = 1 << 5 },
- },
- .leds = {
- { .name = "power", .gpio = 1 << 2, .polarity = NORMAL },
- { .name = "ses_amber", .gpio = 1 << 4, .polarity = REVERSE },
- { .name = "ses_blue", .gpio = 1 << 3, .polarity = REVERSE },
- { .name = "wlan", .gpio = 1 << 1, .polarity = NORMAL },
- },
- },
- [E3000V1] = {
- .name = "Linksys E3000 V1",
- .buttons = {
- { .name = "reset", .gpio = 1 << 6 },
- { .name = "ses", .gpio = 1 << 4 },
- },
- .leds = {
- { .name = "power", .gpio = 1 << 5, .polarity = NORMAL }, // Power LED
- { .name = "usb", .gpio = 1 << 7, .polarity = NORMAL }, // USB LED
- { .name = "ses_amber", .gpio = 1 << 0, .polarity = REVERSE }, // WiFi protected setup LED amber
- { .name = "ses_blue", .gpio = 1 << 3, .polarity = REVERSE }, // WiFi protected setup LED blue
- { .name = "wlan", .gpio = 1 << 1, .polarity = NORMAL }, // Wireless LED
- },
- },
- [E3200V1] = {
- .name = "Linksys E3200 V1",
- .buttons = {
- /* { .name = "switch", .gpio = 1 << 4 },*/ /* nvram get gpio4=robo_reset */
- { .name = "reset", .gpio = 1 << 5 }, /* nvram get reset_gpio=5 */
- { .name = "wps", .gpio = 1 << 8 }, /* nvram get gpio8=wps_button */
- /* { .name = "wombo", .gpio = 1 << 23 },*/ /* nvram get gpio23=wombo_reset - wireless on motherboard */
- },
- .leds = {
- { .name = "power", .gpio = 1 << 3, .polarity = REVERSE }, /* Power LED */
- },
- },
- [E4200V1] = {
- .name = "Linksys E4200 V1",
- .buttons = {
- { .name = "reset", .gpio = 1 << 6 },
- { .name = "wps", .gpio = 1 << 4 },
- },
- .leds = {
- { .name = "power", .gpio = 1 << 5, .polarity = REVERSE },
- },
},
/* Asus */
- [WLHDD] = {
- .name = "ASUS WL-HDD",
- .buttons = {
- { .name = "reset", .gpio = 1 << 6 },
- },
- .leds = {
- { .name = "power", .gpio = 1 << 0, .polarity = REVERSE },
- { .name = "usb", .gpio = 1 << 2, .polarity = REVERSE },
- },
- },
- [WL300G] = {
- .name = "ASUS WL-300g",
- .buttons = {
- { .name = "reset", .gpio = 1 << 6 },
- },
- .leds = {
- { .name = "power", .gpio = 1 << 0, .polarity = REVERSE },
- },
- },
- [WL320GE] = {
- .name = "ASUS WL-320gE/WL-320gP",
- .buttons = {
- { .name = "reset", .gpio = 1 << 6 },
- },
- .leds = {
- { .name = "wlan", .gpio = 1 << 0, .polarity = REVERSE },
- { .name = "power", .gpio = 1 << 2, .polarity = REVERSE },
- { .name = "link", .gpio = 1 << 11, .polarity = REVERSE },
- },
- },
- [WL330GE] = {
- .name = "ASUS WL-330gE",
- .buttons = {
- { .name = "reset", .gpio = 1 << 2 },
- },
- .leds = {
- { .name = "power", .gpio = 1 << 0, .polarity = REVERSE },
- },
- },
[WL500G] = {
.name = "ASUS WL-500g",
.buttons = {
{ .name = "power", .gpio = 1 << 0, .polarity = REVERSE },
},
},
- [WL500GD] = {
- .name = "ASUS WL-500g Deluxe",
- .buttons = {
- { .name = "reset", .gpio = 1 << 6 },
- },
- .leds = {
- { .name = "power", .gpio = 1 << 0, .polarity = REVERSE },
- },
- },
- [WL500GP] = {
- .name = "ASUS WL-500g Premium",
- .buttons = {
- { .name = "reset", .gpio = 1 << 0 },
- { .name = "ses", .gpio = 1 << 4 },
- },
- .leds = {
- { .name = "power", .gpio = 1 << 1, .polarity = REVERSE },
- },
- },
- [WL500GPV2] = {
- .name = "ASUS WL-500g Premium V2",
- .buttons = {
- { .name = "reset", .gpio = 1 << 2 },
- { .name = "ses", .gpio = 1 << 3 },
- },
- .leds = {
- { .name = "power", .gpio = 1 << 0, .polarity = REVERSE },
- { .name = "wlan", .gpio = 1 << 1, .polarity = REVERSE },
- },
- },
- [WL500W] = {
- .name = "ASUS WL-500W",
- .buttons = {
- { .name = "reset", .gpio = 1 << 6 },
- { .name = "ses", .gpio = 1 << 7 },
- },
- .leds = {
- { .name = "power", .gpio = 1 << 5, .polarity = REVERSE },
- },
- },
- [WL520GC] = {
- .name = "ASUS WL-520GC",
- .buttons = {
- { .name = "reset", .gpio = 1 << 2 },
- { .name = "ses", .gpio = 1 << 3 },
- },
- .leds = {
- { .name = "power", .gpio = 1 << 0, .polarity = REVERSE },
- { .name = "wlan", .gpio = 1 << 1, .polarity = REVERSE },
- },
- },
- [WL520GU] = {
- .name = "ASUS WL-520gU",
- .buttons = {
- { .name = "reset", .gpio = 1 << 2 },
- { .name = "ses", .gpio = 1 << 3 },
- },
- .leds = {
- { .name = "power", .gpio = 1 << 0, .polarity = REVERSE },
- { .name = "wlan", .gpio = 1 << 1, .polarity = REVERSE },
- },
- },
[ASUS_4702] = {
.name = "ASUS (unknown, BCM4702)",
.buttons = {
{ .name = "power", .gpio = 1 << 0, .polarity = REVERSE },
},
},
- [WL700GE] = {
- .name = "ASUS WL-700gE",
- .buttons = {
- { .name = "reset", .gpio = 1 << 7 }, // on back, hardwired, always resets device regardless OS state
- { .name = "ses", .gpio = 1 << 4 }, // on back, actual name ezsetup
- { .name = "power", .gpio = 1 << 0 }, // on front
- { .name = "copy", .gpio = 1 << 6 }, // on front
- },
- .leds = {
-#if 0
- // GPIO that controls power led also enables/disables some essential functions
- // - power to HDD
- // - switch leds
- { .name = "power", .gpio = 1 << 3, .polarity = NORMAL }, // actual name power
-#endif
- { .name = "diag", .gpio = 1 << 1, .polarity = REVERSE }, // actual name ready
- },
- .platform_init = bcm4780_init,
- },
- [RTN12] = {
- .name = "ASUS RT-N12",
- .buttons = {
- { .name = "wps", .gpio = 1 << 0 },
- { .name = "reset", .gpio = 1 << 1 },
- // this is the router/repeater/ap switch
- { .name = "sw1", .gpio = 1 << 4 },
- { .name = "sw2", .gpio = 1 << 5 },
- { .name = "sw3", .gpio = 1 << 6 },
- },
- .leds = {
- { .name = "power", .gpio = 1 << 2, .polarity = REVERSE },
- { .name = "wlan", .gpio = 1 << 7, .polarity = NORMAL },
- // gpio3 forces WAN and LAN1-4 all on
- //{ .name = "eth", .gpio = 1 << 3, .polarity = REVERSE },
- },
- },
- [RTN16] = {
- .name = "ASUS RT-N16",
- .buttons = {
- { .name = "reset", .gpio = 1 << 8 },
- { .name = "ses", .gpio = 1 << 6 },
- },
- .leds = {
- { .name = "power", .gpio = 1 << 1, .polarity = REVERSE },
- { .name = "wlan", .gpio = 1 << 7, .polarity = NORMAL },
- },
- },
- [RTN66U] = {
- .name = "ASUS RT-N66U",
- .buttons = {
- { .name = "reset", .gpio = 1 << 9 },
- { .name = "wps", .gpio = 1 << 4 },
- },
- .leds = {
- { .name = "power", .gpio = 1 << 12, .polarity = REVERSE },
- { .name = "usb", .gpio = 1 << 15, .polarity = REVERSE },
- },
- },
/* Buffalo */
- [WHR_G54S] = {
- .name = "Buffalo WHR-G54S",
- .buttons = {
- { .name = "reset", .gpio = 1 << 4 },
- { .name = "bridge", .gpio = 1 << 5 },
- { .name = "ses", .gpio = 1 << 0 },
- },
- .leds = {
- { .name = "diag", .gpio = 1 << 7, .polarity = REVERSE },
- { .name = "internal", .gpio = 1 << 3, .polarity = REVERSE },
- { .name = "ses", .gpio = 1 << 6, .polarity = REVERSE },
- { .name = "bridge", .gpio = 1 << 1, .polarity = REVERSE },
- { .name = "wlan", .gpio = 1 << 2, .polarity = REVERSE },
- },
- },
[WBR2_G54] = {
.name = "Buffalo WBR2-G54",
/* FIXME: verify */
{ .name = "diag", .gpio = 1 << 1, .polarity = REVERSE },
},
},
- [WHR_HP_G54] = {
- .name = "Buffalo WHR-HP-G54",
- .buttons = {
- { .name = "reset", .gpio = 1 << 4 },
- { .name = "bridge", .gpio = 1 << 5 },
- { .name = "ses", .gpio = 1 << 0 },
- },
- .leds = {
- { .name = "diag", .gpio = 1 << 7, .polarity = REVERSE },
- { .name = "internal", .gpio = 1 << 3, .polarity = REVERSE },
- { .name = "bridge", .gpio = 1 << 1, .polarity = REVERSE },
- { .name = "ses", .gpio = 1 << 6, .polarity = REVERSE },
- { .name = "wlan", .gpio = 1 << 2, .polarity = REVERSE },
- },
- },
- [WHR_G125] = {
- .name = "Buffalo WHR-G125",
- .buttons = {
- { .name = "reset", .gpio = 1 << 4 },
- { .name = "bridge", .gpio = 1 << 5 },
- { .name = "ses", .gpio = 1 << 0 },
- },
- .leds = {
- { .name = "diag", .gpio = 1 << 7, .polarity = REVERSE },
- { .name = "internal", .gpio = 1 << 3, .polarity = REVERSE },
- { .name = "bridge", .gpio = 1 << 1, .polarity = REVERSE },
- { .name = "ses", .gpio = 1 << 6, .polarity = REVERSE },
- { .name = "wlan", .gpio = 1 << 2, .polarity = REVERSE },
- },
- },
- [WHR2_A54G54] = {
- .name = "Buffalo WHR2-A54G54",
- .buttons = {
- { .name = "reset", .gpio = 1 << 4 },
- },
- .leds = {
- { .name = "diag", .gpio = 1 << 7, .polarity = REVERSE },
- },
- },
[WLA2_G54L] = {
.name = "Buffalo WLA2-G54L",
/* FIXME: verify */
{ .name = "diag", .gpio = 1 << 1, .polarity = REVERSE },
},
},
- [WZR_G300N] = {
- .name = "Buffalo WZR-G300N",
- .buttons = {
- { .name = "reset", .gpio = 1 << 4 },
- },
- .leds = {
- { .name = "diag", .gpio = 1 << 7, .polarity = REVERSE },
- { .name = "bridge", .gpio = 1 << 1, .polarity = REVERSE },
- { .name = "ses", .gpio = 1 << 6, .polarity = REVERSE },
- },
- },
- [WZR_RS_G54] = {
- .name = "Buffalo WZR-RS-G54",
- .buttons = {
- { .name = "ses", .gpio = 1 << 0 },
- { .name = "reset", .gpio = 1 << 4 },
- },
- .leds = {
- { .name = "diag", .gpio = 1 << 7, .polarity = REVERSE },
- { .name = "ses", .gpio = 1 << 6, .polarity = REVERSE },
- { .name = "vpn", .gpio = 1 << 1, .polarity = REVERSE },
- },
- },
- [WZR_RS_G54HP] = {
- .name = "Buffalo WZR-RS-G54HP",
- .buttons = {
- { .name = "ses", .gpio = 1 << 0 },
- { .name = "reset", .gpio = 1 << 4 },
- },
- .leds = {
- { .name = "diag", .gpio = 1 << 7, .polarity = REVERSE },
- { .name = "ses", .gpio = 1 << 6, .polarity = REVERSE },
- { .name = "vpn", .gpio = 1 << 1, .polarity = REVERSE },
- },
- },
[BUFFALO_UNKNOWN_4710] = {
.name = "Buffalo (unknown, BCM4710)",
.buttons = {
},
},
/* Dell */
- [TM2300] = {
- .name = "Dell TrueMobile 2300",
- .buttons = {
- { .name = "reset", .gpio = 1 << 0 },
- },
- .leds = {
- { .name = "wlan", .gpio = 1 << 6, .polarity = REVERSE },
- { .name = "power", .gpio = 1 << 7, .polarity = REVERSE },
- },
- },
[TM2300V2] = {
.name = "Dell TrueMobile 2300 v2",
.buttons = {
},
},
/* Motorola */
- [WE800G] = {
- .name = "Motorola WE800G",
- .buttons = {
- { .name = "reset", .gpio = 1 << 0 },
- },
- .leds = {
- { .name = "power", .gpio = 1 << 4, .polarity = NORMAL },
- { .name = "diag", .gpio = 1 << 2, .polarity = REVERSE },
- { .name = "wlan_amber", .gpio = 1 << 1, .polarity = NORMAL },
- },
- },
[WR850GV1] = {
.name = "Motorola WR850G V1",
.buttons = {
{ .name = "wlan_green", .gpio = 1 << 7, .polarity = REVERSE },
},
},
- [WR850GV2V3] = {
- .name = "Motorola WR850G V2/V3",
- .buttons = {
- { .name = "reset", .gpio = 1 << 5 },
- },
- .leds = {
- { .name = "power", .gpio = 1 << 1, .polarity = NORMAL },
- { .name = "wlan", .gpio = 1 << 0, .polarity = REVERSE },
- { .name = "wan", .gpio = 1 << 6, .polarity = INPUT },
- { .name = "diag", .gpio = 1 << 7, .polarity = REVERSE },
- },
- },
- [WR850GP] = {
- .name = "Motorola WR850GP",
- .buttons = {
- { .name = "reset", .gpio = 1 << 5 },
- },
- .leds = {
- { .name = "power", .gpio = 1 << 1, .polarity = NORMAL },
- { .name = "wlan", .gpio = 1 << 0, .polarity = REVERSE },
- { .name = "dmz", .gpio = 1 << 6, .polarity = REVERSE },
- { .name = "diag", .gpio = 1 << 7, .polarity = REVERSE },
- },
- },
- /* Belkin */
- [BELKIN_F7D4301] = {
- .name = "Belkin PlayMax F7D4301",
- .buttons = {
- { .name = "reset", .gpio = 1 << 6 },
- { .name = "wps", .gpio = 1 << 8 },
- },
- .leds = {
- { .name = "power", .gpio = 1 << 10, .polarity = REVERSE },
- { .name = "warn", .gpio = 1 << 11, .polarity = REVERSE },
- { .name = "wps", .gpio = 1 << 12, .polarity = REVERSE },
- { .name = "wlan", .gpio = 1 << 13, .polarity = REVERSE },
- { .name = "usb0", .gpio = 1 << 14, .polarity = REVERSE },
- { .name = "usb1", .gpio = 1 << 15, .polarity = REVERSE },
- },
- },
/* Netgear */
[WGT634U] = {
.name = "Netgear WGT634U",
},
},
/* Netgear */
- [WNR834BV2] = {
- .name = "Netgear WNR834B V2",
- .buttons = {
- { .name = "reset", .gpio = 1 << 6 },
- },
- .leds = {
- { .name = "power", .gpio = 1 << 2, .polarity = NORMAL },
- { .name = "diag", .gpio = 1 << 3, .polarity = NORMAL },
- { .name = "connected", .gpio = 1 << 7, .polarity = NORMAL },
- },
- },
- [WNDR3400V1] = {
- .name = "Netgear WNDR3400 V1",
- .buttons = {
- /* nvram get gpio5=robo_reset */
- { .name = "reset", .gpio = 1 << 4 },
- { .name = "wps", .gpio = 1 << 6 },
- { .name = "wlan", .gpio = 1 << 8 },
- },
- .leds = {
- { .name = "wlan", .gpio = 0 << 0, .polarity = NORMAL },
- { .name = "connected", .gpio = 1 << 0, .polarity = NORMAL },
- { .name = "power", .gpio = 1 << 3, .polarity = NORMAL },
- { .name = "diag", .gpio = 1 << 7, .polarity = NORMAL },
- { .name = "usb", .gpio = 1 << 2, .polarity = REVERSE },
- },
- },
[WNDR3700V3] = {
.name = "Netgear WNDR3700 V3",
.buttons = {
.platform_init = bcm4780_init,
},
/* D-Link */
- [DIR130] = {
- .name = "D-Link DIR-130",
- .buttons = {
- { .name = "reset", .gpio = 1 << 3},
- { .name = "reserved", .gpio = 1 << 7},
- },
- .leds = {
- { .name = "diag", .gpio = 1 << 0},
- { .name = "blue", .gpio = 1 << 6},
- },
- },
[DIR320] = {
.name = "D-Link DIR-320",
.buttons = {
{ .name = "usb", .gpio = 1 << 5, .polarity = NORMAL },
},
},
- [DIR330] = {
- .name = "D-Link DIR-330",
- .buttons = {
- { .name = "reset", .gpio = 1 << 3},
- { .name = "reserved", .gpio = 1 << 7},
- },
- .leds = {
- { .name = "diag", .gpio = 1 << 0},
- { .name = "usb", .gpio = 1 << 4},
- { .name = "blue", .gpio = 1 << 6},
- },
- },
[DWL3150] = {
.name = "D-Link DWL-3150",
.buttons = {
},
},
/* Huawei */
- [HUAWEI_E970] = {
- .name = "Huawei E970",
- .buttons = {
- { .name = "reset", .gpio = 1 << 6 },
- },
- .leds = {
- { .name = "wlan", .gpio = 1 << 0, .polarity = NORMAL },
- },
- },
};
static struct platform_t __init *platform_detect_legacy(void)
if (!strcmp(boardtype,"0x0472") && !strcmp(getvar("cardbus"), "1")) { /* Netgear WNR834B V1 and V2*/
if (!strcmp(boardnum, "08") || !strcmp(boardnum, "8"))
return &platforms[WNR834BV1];
- if (!strcmp(boardnum, "01") || !strcmp(boardnum, "1"))
- return &platforms[WNR834BV2];
}
} else { /* PMON based - old stuff */
return &platforms[BUFFALO_UNKNOWN_4710];
}
- if (startswith(getvar("CFEver"), "MotoWRv2") ||
- startswith(getvar("CFEver"), "MotoWRv3") ||
- !strcmp(getvar("MOTO_BOARD_TYPE"), "WR_FEM1")) {
-
- return &platforms[WR850GV2V3];
- }
-
if (!strcmp(boardnum, "44") && !strcmp(getvar("boardflags"),"0x0388")) { /* Trendware TEW-411BRP+ */
return &platforms[TEW411BRPP];
}
board = bcm47xx_board_get();
board_name = bcm47xx_board_get_name();
- if (board != BCM47XX_BOARD_UNKNOWN && board != BCM47XX_BOARD_NO)
- printk(MODULE_NAME ": kernel found a \"%s\"\n", board_name);
switch(board) {
- case BCM47XX_BOARD_ASUS_RTN12:
- return &platforms[RTN12];
- case BCM47XX_BOARD_ASUS_RTN16:
- return &platforms[RTN16];
- case BCM47XX_BOARD_ASUS_RTN66U:
- return &platforms[RTN66U];
- case BCM47XX_BOARD_ASUS_WL300G:
- return &platforms[WL300G];
- case BCM47XX_BOARD_ASUS_WL320GE:
- return &platforms[WL320GE];
- case BCM47XX_BOARD_ASUS_WL330GE:
- return &platforms[WL330GE];
- case BCM47XX_BOARD_ASUS_WL500GD:
- return &platforms[WL500GD];
- case BCM47XX_BOARD_ASUS_WL500GPV1:
- return &platforms[WL500GP];
- case BCM47XX_BOARD_ASUS_WL500GPV2:
- return &platforms[WL500GPV2];
- case BCM47XX_BOARD_ASUS_WL500W:
- return &platforms[WL500W];
- case BCM47XX_BOARD_ASUS_WL520GC:
- return &platforms[WL520GC];
- case BCM47XX_BOARD_ASUS_WL520GU:
- return &platforms[WL520GU];
- case BCM47XX_BOARD_ASUS_WL700GE:
- return &platforms[WL700GE];
- case BCM47XX_BOARD_ASUS_WLHDD:
- return &platforms[WLHDD];
- case BCM47XX_BOARD_BELKIN_F7D4301:
- return &platforms[BELKIN_F7D4301];
case BCM47XX_BOARD_BUFFALO_WBR2_G54:
return &platforms[WBR2_G54];
- case BCM47XX_BOARD_BUFFALO_WHR2_A54G54:
- return &platforms[WHR2_A54G54];
- case BCM47XX_BOARD_BUFFALO_WHR_G125:
- return &platforms[WHR_G125];
- case BCM47XX_BOARD_BUFFALO_WHR_G54S:
- return &platforms[WHR_G54S];
- case BCM47XX_BOARD_BUFFALO_WHR_HP_G54:
- return &platforms[WHR_HP_G54];
case BCM47XX_BOARD_BUFFALO_WLA2_G54L:
return &platforms[WLA2_G54L];
- case BCM47XX_BOARD_BUFFALO_WZR_G300N:
- return &platforms[WZR_G300N];
- case BCM47XX_BOARD_BUFFALO_WZR_RS_G54:
- return &platforms[WZR_RS_G54];
- case BCM47XX_BOARD_BUFFALO_WZR_RS_G54HP:
- return &platforms[WZR_RS_G54HP];
- case BCM47XX_BOARD_DELL_TM2300:
- return &platforms[TM2300];
- case BCM47XX_BOARD_DLINK_DIR130:
- return &platforms[DIR130];
- case BCM47XX_BOARD_DLINK_DIR330:
- return &platforms[DIR330];
- case BCM47XX_BOARD_HUAWEI_E970:
- return &platforms[HUAWEI_E970];
- case BCM47XX_BOARD_LINKSYS_E1000V1:
- return &platforms[E1000V1];
- case BCM47XX_BOARD_LINKSYS_E1000V21:
- return &platforms[E1000V21];
- case BCM47XX_BOARD_LINKSYS_E2000V1:
- return &platforms[E2000V1];
- case BCM47XX_BOARD_LINKSYS_E3000V1:
- return &platforms[E3000V1];
- case BCM47XX_BOARD_LINKSYS_E3200V1:
- return &platforms[E3200V1];
- case BCM47XX_BOARD_LINKSYS_E4200V1:
- return &platforms[E4200V1];
- case BCM47XX_BOARD_LINKSYS_WRT150NV1:
- return &platforms[WRT150NV1];
- case BCM47XX_BOARD_LINKSYS_WRT150NV11:
- return &platforms[WRT150NV11];
- case BCM47XX_BOARD_LINKSYS_WRT160NV1:
- return &platforms[WRT160NV1];
- case BCM47XX_BOARD_LINKSYS_WRT160NV3:
- return &platforms[WRT160NV3];
- case BCM47XX_BOARD_LINKSYS_WRT300NV11:
- return &platforms[WRT300NV11];
- case BCM47XX_BOARD_LINKSYS_WRT310NV1:
- return &platforms[WRT310NV1];
case BCM47XX_BOARD_LINKSYS_WRT54GSV1:
return &platforms[WRT54G];
- case BCM47XX_BOARD_LINKSYS_WRT54G3GV2:
- return &platforms[WRT54G3GV2_VF];
- case BCM47XX_BOARD_LINKSYS_WRT610NV1:
- return &platforms[WRT610N];
- case BCM47XX_BOARD_LINKSYS_WRT610NV2:
- return &platforms[WRT610NV2];
- case BCM47XX_BOARD_LINKSYS_WRTSL54GS:
- return &platforms[WRTSL54GS];
- case BCM47XX_BOARD_MOTOROLA_WE800G:
- return &platforms[WE800G];
- case BCM47XX_BOARD_MOTOROLA_WR850GP:
- return &platforms[WR850GP];
- case BCM47XX_BOARD_MOTOROLA_WR850GV2V3:
- return &platforms[WR850GV2V3];
- case BCM47XX_BOARD_NETGEAR_WNDR3400V1:
- return &platforms[WNDR3400V1];
case BCM47XX_BOARD_NETGEAR_WNDR3700V3:
return &platforms[WNDR3700V3];
case BCM47XX_BOARD_UNKNOWN:
printk(MODULE_NAME ": please open a ticket at https://dev.openwrt.org and attach the complete nvram\n");
return platform_detect_legacy();
default:
- printk(MODULE_NAME ": board was detected as \"%s\", but not gpio configuration available\n", board_name);
- printk(MODULE_NAME ": now trying legacy detect\n");
- return platform_detect_legacy();
+ printk(MODULE_NAME ": board was detected as \"%s\", and kernel should handle it\n", board_name);
+ return NULL;
}
}
projects / openwrt / staging / dedeckeh.git / commitdiff